Cooper Lighting Cirque 4-DP, Cirque 4-AIP, Cirque 4-ADP, Cirque 4-IP User Manual

0 (0)
Cooper Lighting Cirque 4-DP, Cirque 4-AIP, Cirque 4-ADP, Cirque 4-IP User Manual

4DP

7”

[178mm]

MIN.

ø4"

[102mm]

4IP

4ADP

4AIP

Construction: Extruded aluminum housing. Nominal 3’, 4’, 6’ or 8’ illuminated sections.

End Caps: Die-cast aluminum.

Shielding: Clear ribbed acrylic lens or contoured baffle.

Electrical: 120, 277, 347 or Universal Voltage electronic ballast. Fixtures and electrical components certified to UL and CUL standards.

Finish: Durable, low gloss, white, powder coated acrylic finish.

Mounting:

Pendant with single stem (standard) or single cable.

Canopy: Round 5” diameter.

ORDERING INFORMATION:

Sample number: 4DP-1T5-ST12-1EB-SI-S26

Series 4=Cirque

Light Output

DP=Direct Pendant

IP=Indirect Pendant

ADP=Angle-Direct Pendant

AIP=Angle-Indirect Pendant

Number of Lamps (per cross section) (not included) 1=1 Lamp

Lamp Type

 

 

T8

T5

T5HO

Pendant Type

SC=Single Cable

ST=Single Stem 2

Run Length

Overall Nominal Run Length__ft. (Any combination of 8’, 6’, 4’ and 3’ sections)

Voltage 1

 

 

 

1=120V

2=277V

3=347V

U=Universal

Ballast

 

 

 

EB=Electronic Ballast (Standard)

DB=Dimming Ballast

Switching

SI=Single Switching

Emergency

EM=Emergency Pack (Consult Factory)

Fusing

GLR GMF

Shielding

S14=Contoured Baffle S26=Clear Ribbed Acrylic Lens

1 Due to various constraints, some options may not be combined with others. 2 Available with 7° or earthquake 45° swivel canopy assembly.

R O W C O N F I G U R AT I O N

NOTES: For complete product data, refer to the Neo-Ray Specification Binder. Specifications and dimensions subject to change without notice. Products may be modified for use in international markets. Please contact your Cooper Lighting Sales Representative for availability and ordering information.

NEO-RAY

SUSPENDED

 

CIRQUE

4-AIP

4-ADP

4-IP

4-DP

D I R E C T- I N D I R E C T A N G L E D D I R E C T- I N D I R E C T

Direct-indirect and angled direct-indirect light distributions.

Extruded aluminum housing.

Nominal 3’, 4’, 6’ and 8’ illuminated sections.

Runs any length of above component configurations.

Diffusers – radial baffle and/or acrylic ribbed lens

Die cast end caps.

Custom finishes available by special order.

COOPER LIGHTING 729

Loading...