DESCRIPTION
An adjustable Single-lamp Recessed fixture with a 0.75” trim flange suitable for downlighting and accent applications. Utilizes ONE (1) 12V AR70 lamp.
For new construction applications. Insulation must be kept 3” from all sides and at least 1” above the housing.
SPECIFICATION FEATURES
Catalog #
Project
Comments
Prepared by
Type
Date
A.... Housing
Housing, junction box & trim assembly are all steel construction. Fixture utilizes a removable trim sleeve to provide a 0.75” flange around the ceiling opening and to help conceal the inner hardware of the fixture from sight below the ceiling. Can accommodate 0.50” to 1.25” ceiling thickness. Optional Chicago Plenum configuration available.
B.... System Protection:
Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation.
C... Junction Box
Junction Box is UL listed for through branch wiring, 6 #12 90º C supply conductors or 60º C for end of run. The fixture
is also UL listed as ‘access above ceiling not required’.
D... Electrical
Electrical accessible through ceiling opening. J-Box located on the side wall of the housing behind removable access doors. Integral electronic or magnetic low voltage transformers on individually removable “trays” for easy maintenance. May also be configured for remote power.
E.... Lamps
One (1) 12V AR70 lamp mounted in adjustable double gimbal. Lamp holder is individually removable and may be regressed 1” for additional cut-off. Lamp can accept up to three optical accessories (i.e. lens + hex louver + snoot). 45º x 45º locking lamp adjustment. Beveled-edge lamp ring is secured with threadless, bayonet action.
Optional retractable arm is available for lamp pulldown and extreme aiming. Double contact bayonet base sockets included.
F.... Mounting
Butterfly Brackets accept 1/2” EMT, C Channel, Tbar fasteners, and bar hangers. Four tabs on housing for securing to structure.
G... Labels
cULus listed for non-type IC applications, suitable for use in damp locations.
Ceiling Cut-Out: 5.44” x 5.44”
COMBOLIGHT®
Next Generation
Recessed
Single-Lamp Fixture
One (1) Light
12V AR70
New Construction Housing w/ 0.75” Trim Flange
15.01” |
|
|
|
|
|
|
|
16.14” |
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7.45”
6.14” 
6.15” 
12.01”
Double 4.65”
Gimbal
45º x 45º 
Adjust
4.65”
NOTES:
De-Rated wattage labels are available. 12V Primary voltage is available.
Thermal |
Protector |
Integral Electronic |
Low Voltage Transformers |
ORDERING INFORMATION
|
C1 |
|
|
|
|
|
|
|
|
T |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Configuration |
|
|
Lamp Type / Wattage Label |
|
|
Power Supply |
|
|
Lamp Mechanism |
|
|
Trim Finish |
||||||
|
C1 = COMBOLIGHT |
|
|
050A70 = 50 Watt max. AR70 12V |
|
|
Voltage |
|
|
G = Double Gimbal |
|
|
W = White |
||||||
|
Recessed One (1) Light |
|
|
|
|
|
|
1 = 120V |
|
|
R = Retractable Double Gimbal |
|
|
B = Black |
|||||
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
2 = 277V |
|
|
|
|
|
|
|
S = Industrial Silver |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Housing |
Power Supply |
Trim Flange |
|
Housing Interior/Electrical Door/Sleeve |
||||||||||||
|
|
|
N = New Construction |
E = Electronic Low Voltage |
T = 0.75” Trim Flange |
|
Finish |
||||||||||||
|
|
|
C = Chicago Plenum |
|
Transformer |
|
|
|
|
|
W = White |
||||||||
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
M = Magnetic Low Voltage |
|
|
|
|
|
B = Black |
||||||
|
|
|
|
|
|
|
|
Transformer |
|
|
|
|
|
S = Industrial Silver |
|||||
|
|
|
|
|
|
Specifications and Dimensions subject to change without notice. |
|
|
|
rev 022408 |
|||||||||
www.cooperlighting.com |
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031 |
|
Loading...