Cooler Master MCM-H500P-MGNN-S11 User Manual

MIND-BLOWING DESIGN

FEATURES

Dual 200mm ARGB Fans – The iconic, addressable RGB fans are
the core of the H-Series in design and function, capable of
operating quietly while moving high volumes of air due to their
size.

Mesh Front Panel – Two layers of mesh make up the entire front
panel to maximize airflow. A finer layer filters out dust while the
steel mesh reinforces its structure.

Build By Design – The transparent top panel and tempered
glass side panel flaunt the hardware & fans, while the cable
covers, PSU shroud, and cable management space hide the
clutter.

ARGB Lighting System – The pre-installed ARGB fans can be
managed by either the motherboard or an included controller,
connected by the included splitter, to create a comprehensive
ARGB lighting system.

Certified compatible with: ASUS, Gigabyte, MSI and ASRock
motherboards.

Tempered Glass Side Panel – Gaming hardware, custom-loop
cooling, and the pure pride of the builder is shown in panoramic
view through an edge-to-edge tempered glass side panel.

Versatile Cooling Options – Two additional 200mm fans can be
mounted on the top panel for a display of 4 x 200mm fans in
total. Compatible with 360mm radiators in both the top and
front panel, cooling components have the potential to go
beyond the enthusiast level.

Vertical Graphics Card Compatible – Two additional PCI slots at
the rear enable one graphics card to be mounted in the vertical
position with an optional riser cable.

PACKING INFORMATION

EAN code 4719512095249

UPC code 884102042690

Net weight 11.3 kg

Gross weight 14.7 kg

Carton dimension (L x W x H) 640 x 345 x 650mm

Cont. W/ Pallet Carton/ Pallet W/O Pallet

20’ 144 18 189

40’ 324 18 387

40 HQ 360 20 444

MASTERCASE H500P MESH ARGB

MCM-H500P-MGNN-S11

When Gaming Gets Serious

Every serious gaming system requires a substantial amount of
airflow. Not just for freshly built rigs, but also for upgrading
hardware in the future. The MasterCase H500P Mesh ARGB ATX PC
case was engineered for exactly that. Now, with dual 200mm ARGB
fans, premium addressable lighting comes pre-installed—one
upgrade checked off.

Mesh spans the entire front to provide an unrestricted pathway for
air, fed to the two massive fans behind the panel. The top panel,
however, is only partially mesh since a completely open top panel
causes heated air to recirculate, degrading performance. Airflow is
quite literally optimized, with an abundance of fresh air entering the
system while hot air is exhausted through precise routes.

Whether extreme water-cooling or air-cooling is the preferred
method, the MasterCase H500P Mesh ARGB delivers versatility,
performance, and customizability with ARGB lighting for good
measure.

SPECIFICATIONS

Product Name

Product Number MCM-H500P-MGNN-S11

Exterior Color Gun Metal

Materials

Dimensions
(L x W x H)

Motherboard Support

Expansion Slots

Drive Bays

I/O Panel

Pre-installed
Fan(s)

Fan Support

Radiator
Support

Clearances

Cable Routing Behind MB Tray 21~24mm

Dust Filters Front, Top, Bottom

Power Supply Support Bottom Mount, ATX

Warranty 2 Years

Exterior Mesh, Steel, Plastic

Left Side Panel Tempered Glass, Steel

incl. Protrusions 544 x 242 x 542mm

5.25“ ODD N/A

3.5” / 2.5” Combo 2

2.5” SSD 2 (Max. 5)

USB Ports

Audio In / Out

Other

Front 2 x 200mm ARGB Fans

Rear 1 x 140mm Black Fan

Top

Front

Rear 1 x 120 / 140mm

Top

Front 120mm, 140mm 240mm, 280mm, 360mm

Rear 120mm, 140mm

CPU Cooler 190mm / 7.5 inch

Power Supply 250mm / 9.8 inch

Graphics Card 412mm / 16.2 inch

MasterCase H500P Mesh ARGB

Mini-ITX, Micro-ATX, ATX, E-ATX*

(*supports up to 12" x 10.7")

7 + 2

(supports vertical graphics card installation)

2 x USB 3.2 Gen 1 (USB 3.0)
2 x USB 2.0

1 x 3.5mm Audio Jack
1 x 3.5mm Mic Jack

1 x ARGB Controller
1 x ARGB 2-to-3 Splitter

3 x 120 / 140mm
2 x 200mm fan

*200mm Mounting Hole Spacing 179 x 125 w/ up
to 25mm thickness

3 x 120 / 140mm
2 x 200mm

*200mm Mounting Hole Spacing 179 x 125 w/ up
to 25mm thickness

120mm, 140mm, 240mm, 280mm,
360mm

(maximum thickness clearance 55mm)

FEATURES

Dual 200mm ARGB Fans

The iconic, addressable
RGB fans are the core of
the H-Series in design and
function, capable of
operating quietly while
moving high volumes of air
due to their size.

Mesh Front Panel

Mesh makes up the entire
front panel for unrestricted
airflow, implementing
industrial design elements
that also reinforce the
panel’s structural
integrity.

Build By Design

Transparent panels and a
tempered glass side panel
flaunt the hardware & fans,
while the cable covers, PSU
shroud, and cable
management space hide
the clutter.

ARGB Lighting System

The pre-installed ARGB fans
can be managed by either
the motherboard or an
included controller,
connected by the included
splitter, to create a
comprehensive ARGB
lighting system.

Versatile Cooling Options

Two additional 200mm fans
can be mounted on the top
panel for a display of 4 x
200mm fans in total.
Compatible with 360mm
radiators in both the top and
front panel, cooling
components have the potential
to go beyond the enthusiast
level.

Vertical Graphics Card
Compatible

Two additional PCI slots at
the rear enable one
graphics card to be
mounted in the vertical
position with an optional
riser cable.