This manual serves the following ComNet Model Numbers:
CLFE1EOC
CLFE4EOC
CLFE8EOC
CLFE16EOC
CLFE1EOU
CLFE4EOU
CLFE8EOU
CLFE16EOU
INSTALLATION AND OPERATION MANUAL
CLFE(X)EO(C,U) Series
ETHERNET OVER COPPER EXTENDER
WITH PASS-THROUGH POE TO 15 WATTS
The ComNet™ CopperLine® Ethernet over copper line supports up to sixteen channels of 10/100Mbps Ethernet with Pass-through PoE over twisted pair cable (CAT-5, UTP), or over coaxial cable. The single channel units may be powered by a PoE switch or the included power supply. Four, eight, and sixteen channel units operate from local power. These units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. DIP switches are provided for userselection of local or remote, 10 or 100Mbps, and 1 pair or 4 pair (UTP) settings.
Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. Table 2 on Page 9 describes the LED indicators for each light on the unit.
The CLFE8EO(C,U) and CLFE16EO(C,U) are 1RU rack mountable units. The CLFE4EO(C,U) units are interchangeable between stand-alone or card mount configurations, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 or DINBKT4 adaptor plate. The CLFE1EO(C,U) units are stand-alone, or may be DIN-rail mounted by the addition of ComNet model DINBKT4 adaptor. See Figures A through C on Page 11 for mounting instructions.
TECH SUPPORT: 1.888.678.9427
INS_CLFE(X)EO(C,U)_REV– 10/27/11 PAGE 1
INSTALLATION AND OPERATION MANUAL |
CLFE(X)EO(C,U) Series |
|
|
FIGURE 1 – CLFE1EOC SINGLE CHANNEL COAX UNIT
ETHERNET
FIGURE 2 – CLFE1EOC SINGLE CHANNEL COAX UNIT
Local/Remote push button |
UP |
|
See Installation Instructions, |
||
|
||
Step 3 |
|
FIGURE 3 – CLFE1EOU SINGLE CHANNEL UTP UNIT
ETHERNET
|
EXT DISTANCE |
|
|
|
Black w/ White |
Power: Operates on PoE power |
|
|
Stripe (AC or DC–) |
OR 9 to 36 VDC |
|
|
Black (AC or DC+) |
OR 24 VAC |
|
|
|
Power Consumption: 1.5 W |
|
|
Switch |
UP |
DOWN |
|
Local/Remote |
Remote |
Local |
|
10/100 |
10 Mbps |
100 Mbps |
|
See Installation Instructions for more information |
||
DOWN |
10/100 data rate DIP switch |
|
|
Local/Remote DIP switch |
|
||
|
|
EXT DISTANCE |
|
Black w/ White |
Power: Operates on PoE power |
Stripe (AC or DC–) |
OR 9 to 36 VDC |
Black (AC or DC+) |
OR 24 VAC |
|
Power Consumption: 1.5 W |
FIGURE 4 – CLFE1EOU SINGLE CHANNEL UTP UNIT
Local/Remote DIP switch
10/100 data rate DIP switch |
|
DOWN |
|
|
|
Wire pair DIP switch |
|
|
Switch |
UP |
DOWN |
Local/Remote |
Remote |
Local |
10/100 |
10 Mbps |
100 Mbps |
Wire Pair |
4 Pair |
1 Pair |
See Installation Instructions for more information
UP
TECH SUPPORT: 1.888.678.9427
INS_CLFE(X)EO(C,U)_REV– 10/27/11 PAGE 2
INSTALLATION AND OPERATION MANUAL |
CLFE(X)EO(C,U) Series |
|
|
FIGURE 3 – CLFE4EOC FOUR CHANNEL SURFACE OR RACK MOUNT COAX UNIT
CH1 ETHERNET
CH2 ETHERNET
CH3 ETHERNET
CH4 ETHERNET
Operating Power: 9 to 15 VDC
Power Consumption: 5W
FIGURE 4 – CLFE4EOC FOUR CHANNEL SURFACE OR RACK MOUNT COAX UNIT
|
Local/Remote push button |
|
See Installation Instructions, |
|
Step 3 |
Local/Remote DIP switch |
10/100 data rate |
See Installation Instructions, |
|
Step 3 |
DIP switch |
|
See Installation |
|
Instructions, Step 1 |
CH1 EXT
DISTANCE
CH2 EXT
DISTANCE
CH3 EXT
DISTANCE
CH4 EXT
DISTANCE
Black w/ White
Stripe (DC–)
Black (DC+)
TECH SUPPORT: 1.888.678.9427
INS_CLFE(X)EO(C,U)_REV– 10/27/11 PAGE 3
INSTALLATION AND OPERATION MANUAL |
CLFE(X)EO(C,U) Series |
|
|
FIGURE 5 – CLFE4EOU FOUR CHANNEL SURFACE OR RACK MOUNT UTP UNITS
CH1 ETHERNET
CH2 ETHERNET
CH3 ETHERNET
CH4 ETHERNET
Operating Power: 9 to 15 VDC
Power Consumption: 5W
FIGURE 6 – CLFE4EOU FOUR CHANNEL SURFACE OR RACK MOUNT UTP UNITS
CH1 EXT DISTANCE
CH2 EXT DISTANCE
CH3 EXT DISTANCE
CH4 EXT DISTANCE
Black w/ White Stripe (DC–)
Black (DC+)
Local/Remote DIP switch
See Installation Instructions, Step 3
Data rate DIP switch
See Installation Instructions, Step 1 |
|
Wire pair DIP switch |
|
See Installation Instructions, Step 2
TECH SUPPORT: 1.888.678.9427
INS_CLFE(X)EO(C,U)_REV– 10/27/11 PAGE 4