KENAI™ 10’x8’
Instructions apply to Part Number 9234-908
When You Are Ready
To Set Up Your Tent
–Select a level campsite clear of rocks, branches and other hard or sharp objects.
–Do not set up your tent under trees.
–For best results in windy conditions, do not position the door of tent
into the wind.
|
POLE ASSEMBLY PARTS |
|
Main Tent |
Part No. 9234-3301 |
|
Poles |
|
|
|
|
|
|
|
|
Rainfly |
Part No. 9234-3311 |
|
Pole |
|
|
|
|
|
|
Rainfly Part No. 9234-3321 |
Layout & Positioning |
2 |
Connect Frame to Tent |
1 of Tent, Pole Assembly |
– Insert one end of the main tent pole |
|
– Layout and position tent with door |
|
onto pin of pin & ring system, at the |
|
tent corner. (illus. 3) |
|
facing desired direction. (illus. 1) |
|
|
|
– Go to opposite end of pole and |
|
– Unzip door. |
|
|
|
gradually apply pressure to the pole |
|
– Stake down tent corners only, using |
|
|
|
forming an arch until you are able to |
|
the rings at the end of the stake loops. |
|
|
|
insert the pin into the pole. |
|
Keep the floor taut. (illus. 2) |
|
|
|
– Repeat for second pole. (illus. 4) |
|
|
|
–Assemble frame poles by interlocking shock-corded poles.
This will make two long poles.
–Insert the poles diagonally into pole
sleeves. The center of the poles should cross forming an “X” in the middle of tent. (illus. 1)
Assembled |
|
poles |
|
inserted |
|
through |
|
pole |
|
sleeves |
illus. 4 |
|
Tent frame set-up |
illus. 1
illus. 2 |
illus. 3 |
Insert pole end onto |
|
Tent stake through ring |
pin & ring |