STITCH LINE
instant Fly setup instructions
MODEL 2000010327 |
2000010328 |
2000010330 |
2000010331 |
Before You Begin
•Ensure the instant tent is set up correctly by carefully reviewing and following all safety and installation instructions provided with the instant tent.
• Take out the instant fly and stakes. (Fig. 1)
2000010327 |
2000010328 |
Fig. 1 |
2000010330 |
2000010331 |
|
1 |
Install The Instant Fly |
• Drape rainfly over tent. (Fig. 2) |
|
• Attach the plastic fasteners to the leg poles below the |
push button. (Fig. 3)
• Pull the webbing to adjust the firmness of rainfly on tent. (Fig. 3)
• Attach and stake out guylines. (Fig. 4)
• Adjust sliders to make guylines tight.
Note: The tent may look different from yours. It is for illustration purposes only.
Webbing |
Push Button |
|
|
|
Plastic Fastener |
|
Fig. 3 |
Fig. 2
Guyline
Stake
Fig. 4
Completed instant tent with fly
2 Disassembly
To take down the tent fly, follow the previous steps and illustrations in the reverse order:
•Take off the plastic fasteners from leg poles. (Fig. 3)
•Remove guylines and stakes. (Fig. 4)
•Remove rainfly from the tent. (Fig. 2)
3 |
To Store |
1. All stakes must be placed in the storage bag to prevent |
|
damage to the fabric items placed in the carry case. |
2. Make sure all components are clean and dry before placing in carry case.
3. Store in a clean, dry area.
To obtain additional instant tent units,
see your local retailer or visit www.coleman.com.
WARNING: Keep all flame and heat sources away from this tent fabric.
This tent meets the flammability requirements of CPAI-84. The fabric may burn if left in continuous contact with any flame source. The application of any foreign substance to the tent fabric may render the flame-resistant properties ineffective.
The Coleman Company, Inc. • 3600 North Hydraulic • Wichita, Kansas 67219 U.S.A. 1-800-835-3278 • www.coleman.com
MADE IN BANGLADESH
© 2011 The Coleman Company, Inc. All rights reserved.
Coleman® , and are registered trademarks of The Coleman Company, Inc.
4010015469 (ECN20020024-01)