Size:
112.12 Kb
Download

16’ x14’ Convertible Insta-ClipShelter

Instructions apply to Part Number 9600-161

When You Are Ready To Set Up Your Shelter

–Selecta level area clear of rocks, branches and other hard or sharp objects.

–Donot set up your shelter under trees.–Foreasier set up, two or more people

are recommended.

–Placefabric in center of selected location and assemble above fabric.

ASSEMBLY PARTS

Poles (6) Part No. 9392-2291

Hub (1) Part No. 9392-2351

1 Pole Assembly

–Youwill need to assemble and connect one pole at a time to the hub.

–Donot completely assemble poles.

a)Beginning at spring-clipend of pole, assemble all but the lastshock-cordedsection. The pole and one section should curve downward. (illus. 2)

b)Insert the spring-clipend into one of the hub ports until it clicks into position. (illus. 1), (illus. 2)

c.Repeat for each of the five remaining poles (illus. 2)

Hub

Illus. 1

Poles inserted into hub

Hub

Insta-Clips

Illus. 2

Shelter laid out in position with partially assembled frame locked into hub.

2 Attach Shelter to Frame

–Withthe frame still partially set up, clip the center of the shelter to the

center hub. (illus. 3)

–Startingtowards the center of the shelter, clip the shelter fabric to the poles.

Start by attaching the center of the shelter to the pole hub.

illus. 3 Shelter clipped to partially assembled frame

3 Complete Shelter

–Fullyextend each pole by straightening allshock-cordedpole sections.

–Insertthe pin on the pin and ring system, at the corner of the Screen House into the the pole end.

(illus. 4), (illus. 6)

–Repeatfor remaining poles.–Adjustpoles to pull the shelter

taut and stake down through the fabric loops at the end of pin and ring. (illus. 5), (illus. 6)

–Attachguy lines to fabric

guy loops at each corner and stake out (illus. 6)

–Screendoors conveniently tuck into pocket when not in use. (illus. 7)

illus. 7

When not in use, screen door can be tucked into side pocket.

(Do not store shelter with screens in pocket.)

illus. 6 Completed shelter with guy lines staked out

illus. 4

Insert into the pole end

illus. 5

Stake through stake loop

Things You Should Know

Never store shelter, even for a short period of time, without drying it thoroughly and brushing off caked dirt. Do not pack stakes or poles inside your shelter. Use separate storage bag.

STAKES SHOULD BE REMOVED BY PULLING ON THE STAKE ITSELF. NEVER PULL ON THE SHELTER FABRIC OR STAKE LOOP TO REMOVE STAKE.

SHELTER POLES SHOULD NOT BE LEFT TELESCOPED TOGETHER DURING STORAGE.

Do not leave your shelter set-upfor weeks at a time, be aware that exposure to the ultraviolet rays of the sun can seriously damage material and/or cause it to become discolored.

WARNING: Keep all flame and heat sources away from this shelter fabric.

This shelter meets the flammability requirements of CPAI-84.The fabric will burn if left in continuous contact with any flame source. The application of any foreign substance to the shelter fabric may render theflame-resistantproperties ineffective.

THE COLEMAN CO., INC.

3600 N. Hydraulic • Wichita, Kansas 67219

1-800-835-3278• www.coleman.com

MADE IN SRI LANKA

PRINTED IN SRI LANKA Rev. 11/04