CITIZEN SDC-344II User Manual [de, ru, es, fr, it, en, pl]

SDC-344II

HDBMD854138 XXX

D854 SDC-344II SIZE=245X72mm

* POWER SUPPLY

English

CITIZEN model SDC-344II is a dual-powered (high power solar + back-up battery) calculator operative under any lighting conditions.

-Auto power-off function-

The calculator switches the power off automatically if there has been no key entry for about 6 minutes.

-Battery change-

If the back-up battery needs to be changed, open the lower cabinet to remove the old battery and insert a new battery in the indicated polarity. After changing battery, please use a metal, elliptical object to press the RESET pad on printed circuit board.

* KEY INDEX

English

[CEONC] : Power on / Clear entry / Clear key [00→0] : Right shift key

[M+] : Memory plus key [M–] : Memory minus key [+/–] : ±Sign change key

[MRC ] : Memory recall key / Memory clear key [MU] : Mark-up / Mark-down Key

[RATE] : Tax rate setting key

[RECAL- TAX L] : Price without tax key / To recall tax rate when pressing [RATE]

and [–TAX] keys.

[STOR+TAXE] : Price with tax key / To store tax rate when pressing [RATE] and

		[+TAX] keys.
A 0 2 3 F		Decimal place selection switch
– F –		Floating decimal mode
– 0 – 2 – 3 – Fixed decimal mode
– A –		ADD–mode automatically enters the monetary decimal in
		addition and subtraction calculations
5/4		Round up / Round-off / Round-down switch
The Signs Of The Display Mean The Following:
MEMORY : Memory			–MINUS : Minus (or negative)
ERROR : Overflow-error			TAX : Amount of tax
–TAX : Price excluding tax			+TAX : Price including tax
% : Tax rate stored			RATE : Tax rate setting

* OPERATION EXAMPLES

English

1.Calculation Examples

Before performing each calculation, press the [

ON

] key two times.

CE C

Example

Key operation

Display

A 0 2 3 F

2 x 3 = 6

2 [x] 2 [

ON

] 3 [=]

6.

CE C

7 x 9 = 63

7 [÷] [x] 9 [=]

63.

300 x 27% = 81

300 [x] 27 [%]

81.

11.2

x 100% = 20%

11.2 [÷] 56 [%]

20.

56

300+(300 x 40%)=420

300 [+] 40 [%]

420.

300–(300 x 40%)=180

300 [–] 40 [%]

180.

1400 x 12% = 168

1400 [x] 12 [%]

168.

6 + 4 + 7.5 = 17.5

6 [+] 4 [+] 7.5 [=]

17.5

5 x 3 ÷ 0.2 = 75

5 [x] 3 [÷] 0.2 [=]

75.

8 ÷ 4 x 3.7 + 9 =16.4

8 [÷] 4 [x] 3.7 [+] 9 [=]

16.4

54 = 625

5 [x] [=] [=] [=]

625.

1 / 2 = 0.5

2 [÷] [=]

0.5

1

= 0.0625

2 [x] 3 [+] 10 [÷] [=]

0.0625

(2 x 3 +10)

A 0 2 3 F

$14.90+$0.35–$1.45+

1490 [+] 35 [–] 145

145.

5/4

$12.05=$25.85

[+] 1205 [=]

25.85

2.Memory Calculation

A 0 2 3 F

(12 x 4) – (20 ÷ 2) [MCR ] [MCR ] [

ON

]

0.

CE C

5/4

= 38

12 [x] 4 [M+] 20 [÷] 2 [M–]

MEMORY

10.

[MCR ]

MEMORY

38.

[MCR ] [

ON

]

0.

CE C

3.Constant Calculation

A 0 2 3 F

2 + 3 = 5

2 [+] 3 [=]

5.

4 + 3 = 7

4 [=]

7.

3 x 4 = 12

3 [x] 4 [=]

12.

3 x 6 = 18

6 [=]

18.

4.Overflow Error Clear

12345678901234

123456789012345

x 10000 =

[00→0]

12’345’678’901’234.

1'234.5678901234x1012

[x] 10000 [=]

ERROR

1’234.5678901234

[

ON

]

0.

CE C

5.Price mark-up & down calculation

A 0 2 3 F

200+(P x 20%)=P

2000 [÷] 20 [MU]

2'500.00

P=

2000

=2'500.00

[MU]

500.00

5/4

1- 20%

2500–2000 = 500.00

2000 [÷] 20 [+/–] [MU]

1'666.67

200–(P x 20%)=P

P=

2000

=1'666.67

1+ 20%

18000 - 15000 x100%

18000 [–] 15000 [MU]

20.00

15000

= 20.00%

6.Tax Calculation

A 0 2 3 F

100+TAX(3%)

3 [RATE] [+TAX]

3.

%

= 103

100 [+TAX]

+TAX

103.

TAX

Tax sum = 3

[+TAX]

3.

3 = Tax sum

103 = Tax inclusive value

206–TAX(3%)

[

ON

] [RATE] [–TAX]

3.

%

CE C

–TAX

= 200

206 [–TAX]

200.

TAX

Tax sum = 6

[–TAX]

6.

6 = Tax sum

200 = Tax exclusive value

File name: D854_English version : 04/11/05

245x72mm(12.25x72mm)

A 0 2 3 F

– F –

– 0 – 2 – 3 –

– A –

5/4

* ALIMENTACIÓN

Español

Modelo SDC-344II funciona gracias a un mecanismo de doble carga (luz solar y batería de apoyo), lo cual le permite operar bajo cualquier condición de iluminación.

-Función de desconexión automática-

La calculadora se apaga automáticamente si no ha sido utilizada durante 6 minutos aproximadamente.

-Reemplazado de la pila-

Si la pila de apoyo necestia ser reemplazada, quite los tornillos del parte inferior y sustituya la pila gastada por una nueva. Coloque la pila en su posición correcta, con la polaridad indicada. Después de cambiar la batería pulse la almohadilla RESET en la tarjeta de circuito impreso con un objeto metálico elíptico.

* TECLADO INFORMATIVO

Español

[CEONC] : Tecla de encendido / Tecla de borrar entrada / Borrar todo [+/–] : ±Tecla de cambio de signo

[00→0] : Tecla de anular el digito ultimado [M+] : Tecla de memoria positiva

[M–] : Tecla de memoria negativa

[MRC ] : Tecla de llamada de memoria / Tecla de limpieza de memoria [MU] : Tecla de subir o bajar precios

[RATE] : Tecla del Ajuste del Índice de la Tasa

[RECAL- TAX L] : Precio sin la tecla de tasa / Para recobrar el índice de la tasa cuando se presionan las teclas [RATE] y [–TAX]

[STOR+TAXE] : Precio con la tecla de tasa / Para almacenar el índice de la tasa cuando se presionan las teclas [RATE] y [+TAX]

Selector del lugar decimal

Modo decimal flotante Modo decimal flotante

Modo ADD: ingresa automáticamente el decimal monetario en cálculos de suma y resta

Redondeo hacia arriba / Sin redondeo / Redondeo

hacia abajo

Los signos del visor significan lo siguiente:

MEMORY : Memoria	–MINUS : Menos (o negativo)
ERROR : Error de desbordamiento	TAX : Cantidad de tasa
–TAX : Precio excluyendo la tasa	+TAX : Precio incluyendo la tasa
% : Índice de la tasa almacenada	RATE : Ajuste del índice de la tasa

* EJEMPLO DE FUNCIONES

Español

1.Ejemplos de calculación

ON

Antes de cada cálculo, pulse la tecla [

] 2 veces.

CE C

Visualización

Ejemplo

Operación con la tecla

A 0 2 3 F

2 x 3 = 6

2 [x] 2 [

ON

] 3 [=]

6.

CE C

7 x 9 = 63

7 [÷] [x] 9 [=]

63.

300 x 27% = 81

300 [x] 27 [%]

81.

11.2

x 100% = 20%

11.2 [÷] 56 [%]

20.

56

300+(300 x 40%)=420

300 [+] 40 [%]

420.

300–(300 x 40%)=180

300 [–] 40 [%]

180.

1400 x 12% = 168

1400 [x] 12 [%]

168.

6 + 4 + 7.5 = 17.5

6 [+] 4 [+] 7.5 [=]

17.5

5 x 3 ÷ 0.2 = 75

5 [x] 3 [÷] 0.2 [=]

75.

8 ÷ 4 x 3.7 + 9 =16.4

8 [÷] 4 [x] 3.7 [+] 9 [=]

16.4

54 = 625

5 [x] [=] [=] [=]

625.

1 / 2 = 0.5

2 [÷] [=]

0.5

1

= 0.0625

2 [x] 3 [+] 10 [÷] [=]

0.0625

(2 x 3 +10)

A 0 2 3 F

$14.90+$0.35–$1.45+

1490 [+] 35 [–] 145

145.

5/4

$12.05=$25.85

[+] 1205 [=]

25.85

2.Cálculo de memoria

A 0 2 3 F

(12 x 4) – (20 ÷ 2) [MCR ] [MCR ] [

ON

]

0.

CE C

5/4

= 38

12 [x] 4 [M+] 20 [÷] 2 [M–]

MEMORY

10.

[MCR ]

MEMORY

38.

[MCR ] [

ON

]

0.

CE C

3.Constante

A 0 2 3 F

2 + 3 = 5

2 [+] 3 [=]

5.

4 + 3 = 7

4 [=]

7.

3 x 4 = 12

3 [x] 4 [=]

12.

3 x 6 = 18

6 [=]

18.

4.Limpieza de error de desbordamiento

12345678901234

123456789012345

x 10000 =

[00→0]

12’345’678’901’234.

1'234.5678901234x1012

[x] 10000 [=]

ERROR

1’234.5678901234

[

ON

]

0.

CE C

5.Cálculo de subir o bajar precios

A 0 2 3 F

200+(P x 20%)=P

2000 [÷] 20 [MU]

2'500.00

P=

2000

=2'500.00

[MU]

500.00

5/4

1- 20%

2500–2000 = 500.00

2000 [÷] 20 [+/–] [MU]

1'666.67

200–(P x 20%)=P

P=

2000

=1'666.67

1+ 20%

18000 - 15000 x100%

18000 [–] 15000 [MU]

20.00

15000

= 20.00%

6.Cálculo de impuestos

A 0 2 3 F		100+TAX(3%)	3 [RATE] [+TAX]
						+TAX
		= 103	100 [+TAX]
						TAX
		Suma de impuesto = 3	[+TAX]
		3 = Suma de impuesto		103 = Valor con impuesto
		206–TAX(3%)	[	ON	] [RATE] [–TAX]
				CE C		–TAX
		= 200	206 [–TAX]
						TAX
		Suma de impuesto = 6	[–TAX]
		6 = Suma de impuesto		200 = Valor sin impuesto

3. %

103.

3.

3. %

200.

6.

File name: D854_Spanish

version : 04.11.05

245x72mm(12.25x72mm)

* FONTE DE ALIMENTACÃO

Português

CITIZEN modelo SDC-344II tem dupla fonte de alimentação de energia (energia solar e bateria de reserva), permitindo operar sob qualquer condição de iluminação.

-Função Auto power-off(desligamento automático)-

A calculadora desliga autom áticamente, caso nenhum a tecla seja utilizada por aproximadamente 6 minutos.

-Troca de bateria-

Se for necessário trocar a bateria de reserva, remova a bateria usada, abrindo a tampa inferior e coloque uma bateria nova, observando a polaridade indicada. Depois de trocar a bateria, use um objeto metálico e elíptico para pressionar a tecla RESET na placa de circuito impresso.

* ÍNDICE DE TECLAS

Português

[CEONC] : Tecla para Ligar / Tecla para Limpar Entrada / Limpar [00→0] : Tecla de mudança de digito

[+/–] : Tecla para mudar Sinal ± [M+] : Tecla de mais da memoria [M–] : Tecla de menos da memoria

[MRC ] : Tecla da rechamada da memória / Tecla para limpar a memória [MU] : Tecla para Marca Preço para cima / baixo

[RATE] : Tecla para Ajuste do Índice da Taxa

[STORE+TAX ] : Preço com a Tecla de Taxa / Para armazenar o índice da taxa quando pressionadas as teclas [RATE] e [+TAX]

[RECAL- TAX L] : Preço sem a Tecla de Taxa / Para recuperar o índice da taxa quando pressionadas as teclas [RATE] e [–TAX]

A 0 2 3 F

–F –

–0 – 2 – 3 –

–A –

5/4

Comutador para seleção de casa decimal

Modalidade de decimal flutuante Modalidade de decimal fixo

Modalidade ADICIONAR entra automaticamente a decimal monetária em cálculos de adição e subtração.

Arredondamento para cima / Truncamento / Arredondamento para baixo

Os Sinais do Visor Significam o Seguinte:

MEMORY : Memória	–MINUS : Menos (ou negativo)
ERROR : Erro por transbordamento	TAX : Quantia de taxa
–TAX : Preço excluindo a taxa	+TAX : Preço incluindo a taxa
% : Índice da taxa armazenada	RATE : Ajuste do índice da taxa

* EXEMPLOS DE OPERACÃO							Português
1.Exemplo de calculos
Antes de executar cada cálculo, pressione a tecla [					ON	] 2 vezes.
				CE C
	Exemplo	Operação com a tecla					Visualização
A 0 2 3 F 2 x 3 = 6		2 [x] 2 [	ON	] 3 [=]			6.
			CE C
	7 x 9 = 63	7 [÷] [x] 9 [=]					63.
	300 x 27% = 81	300 [x] 27 [%]					81.
	11.2 x 100% = 20%	11.2 [÷] 56 [%]					20.
56

300+(300 x 40%)=420

300 [+] 40 [%]

300–(300 x 40%)=180

300 [–] 40 [%]

1400 x 12% = 168

1400 [x] 12 [%]

6 + 4 + 7.5 = 17.5

6

[+] 4 [+] 7.5 [=]

5 x 3 ÷ 0.2 = 75

5

[x] 3 [÷] 0.2 [=]

8 ÷ 4 x 3.7 + 9 =16.4

8

[÷] 4 [x] 3.7 [+] 9 [=]

54 = 625

5

[x] [=] [=] [=]

1 / 2 = 0.5

2

[÷] [=]

1

= 0.0625

2

[x] 3 [+] 10 [÷] [=]

(2 x 3 +10)

A 0 2 3 F

$14.90+$0.35–$1.45+

1490 [+] 35 [–] 145

5/4

$12.05=$25.85

[+] 1205 [=]

2.Memória

A 0 2 3 F

(12 x 4) – (20 ÷ 2)

[MCR ] [MCR ] [

ON

]

CE C

= 38

12 [x] 4 [M+] 20 [÷] 2 [M–]

5/4

[MCR ]

ON

[MCR ] [

]

CE C

3.Constante

A 0 2 3 F

2 + 3 = 5

2 [+] 3 [=]

4 + 3 = 7

4 [=]

3 x 4 = 12

3 [x] 4 [=]

3 x 6 = 18

6 [=]

420.

180.

168.

17.5

75.

16.4

625.

0.5

0.0625

145.

25.85

	0.
MEMORY	10.

MEMORY	38.
	0.
	5.
	7.
	12.
	18.

4.Erro por transbordamento

12345678901234

123456789012345

x 10000 =

1'234.5678901234x1012 [00→0]

ERROR

12’345’678’901’234.

[x] 10000 [=]

1’234.5678901234

[

ON

]

0.

CE C

5.Cálculo para marcação de preço para cima & para baixo

A 0 2 3 F

200+(P x 20%)=P

2000 [÷] 20 [MU]

2'500.00

P=

2000

=2'500.00

[MU]

500.00

5/4

1- 20%

2500–2000 = 500.00

2000 [÷] 20 [+/–] [MU]

1'666.67

200–(P x 20%)=P

P=

2000

=1'666.67

1+ 20%

18000 - 15000 x100%

18000 [–] 15000 [MU]

20.00

15000

= 20.00%

6.Cálculo da Taxa

A 0 2 3 F

100+TAX(3%)

3 [RATE] [+TAX]

3.

%

= 103

100 [+TAX]

+TAX

103.

TAX

Soma da Taxa = 3

[+TAX]

3.

3 = Soma da Taxa 103 = Valor com taxa incluída

206–TAX(3%)

[

ON

] [RATE] [–TAX]

3. %

CE C

–TAX

= 200

206 [–TAX]

200.

TAX

Soma da Taxa = 6

[–TAX]

6.

6 = Soma da Taxa

200 = Valor excluído de Taxa

File name: D854_Portuguese

version : 04.11.05

245x72mm(12.25x72mm)

* STROMVERSORGUNG

Deutsch

Das CITIZEN Modell SDC-344II wird durch 2 voneinander unabhängigen Energiequellen versorgt (Entweder durch eine sehr starke Solarzelle oder durch eine Batterie). Der Rechner arbeitet selbst unter schlechtesten Lichtbedingungen.

-Automatische Ausschaltung-

Ist der Rechner 6 Minuten nicht in Betrieb, schaltet er sich automatisch ab.

-Batteriewechsel-

Soltte die batterie gewechselt werden, entfernen Sie bitte die Schrauben vom unterteil und tauschen die alte gegen eine neue batterie aus. Beachten Sie, daß die batterie richtig, entsprechend der polarität, eingelegt wird. Drücken Sie nach dem Auswechseln der Batterie mit einem runden metallenem Objekt auf das RESET Feld auf der bedruckten Platine.

* ERKLARUNGEN VON SCHLUSSEL

Deutsch

[CEONC] : An / Eingabe löschen / Löschen Taste [00→0] : Rechts schub taste

[M+] : Speicher Plus-Taste

[M–] : Speicher Minus-Taste [+/–] : ±Vorzeicheneingabetaste

[MRC ] : Speicher Abruf-Taste / Speicher Löschen-Taste [MU] : Preisangabe-oben/unten Taste

[RATE] : Steuerraten-Einstellungstaste

[RECAL- TAX L] : Preis ohne Steuern Taste / Abrufen der Steuerrate, wenn die Tasten [RATE] und [–TAX] gedrückt werden.

[STOR+TAXE] : Preis mit Steuern Taste / Speichern der Steuerrate, wenn die Tasten [RATE] und [+TAX] gedrückt werden.

A 0 2 3 F		Schalter für Dezimalauswahlplatz
– F –		Gleitkomma-Modus
– 0 – 2 – 3 – Festkomma-Modus
– A –		ADD–Modus gibt bei Additionsund Subtraktions-
		rechnungen automatisch das Dezimalkomma an.
5/4		Aufrunden, Abrundenschalter
Die Zeichen in der Anzeige haben die folgende Bedeutung:
MEMORY : Speicher			–MINUS : Minus (oder negative)
ERROR : Überlauffehler			TAX : Steuerbetrag
–TAX : Preis ohne Steuern			+TAX : Preis mit Steuern
% : Steuerrate gespeichert			RATE : Steuerraten-Einstellung
* BEISPIEL FÜR DEN bETRIEB					Deutsch

1.Berechnungsbeispiele

Drücken Sie vor dem Ausführen einer Berechnung jeweils die [CEONC] Taste 2 mal.

	Beispiel		Tastenkombination					Anzeige
A 0 2 3 F 2 x 3		= 6	2	[x] 2 [	ON	] 3	[=]	6.
					CE C
	7 x 9	= 63	7	[÷] [x] 9 [=]				63.
	300 x 27% = 81		300 [x] 27 [%]					81.
11.2		x 100% = 20%	11.2 [÷] 56 [%]					20.
56

				300+(300 x 40%)=420				300 [+] 40 [%]
				300–(300 x 40%)=180				300 [–] 40 [%]
				1400 x 12% = 168				1400 [x] 12 [%]
				6 + 4 + 7.5 = 17.5				6	[+] 4 [+] 7.5 [=]
				5 x 3 ÷ 0.2 = 75				5	[x] 3 [÷] 0.2 [=]
				8 ÷ 4 x 3.7 + 9 =16.4				8	[÷] 4 [x] 3.7 [+] 9 [=]
				54 = 625				5	[x] [=] [=] [=]
				1 / 2 = 0.5				2	[÷] [=]
				1		= 0.0625		2	[x] 3 [+] 10 [÷] [=]
					(2 x 3 +10)
A 0 2 3 F				$14.90+$0.35–$1.45+				1490 [+] 35 [–] 145
		5/4		$12.05=$25.85				[+] 1205 [=]
2. Speicher
A 0 2 3 F				(12 x 4) – (20 ÷ 2)			[MRC ] [MRC ] [			ON	]
										CE C
				= 38			12 [x] 4 [M+] 20 [÷] 2 [M–]
			5/4

[MRC ]

[MRC ] [CEONC]

3.Konstant

420.

180.

168.

17.5

75.

16.4

625.

0.5

0.0625

145.

25.85

0.

MEMORY 10.

MEMORY 38.

0.

A 0 2 3 F 2 + 3 = 5		2	[+] 3 [=]	5.
	4 + 3 = 7	4	[=]	7.
	3 x 4 = 12	3	[x] 4 [=]	12.
	3 x 6 = 18	6	[=]	18.

4.Korrektur und überlauf-fehleer

12345678901234	123456789012345
x 10000 =	[00→0]		12’345’678’901'234.
1'234.5678901234x1012		ERROR
	[x] 10000 [=]		1’234.5678901234

[

ON

]

0.

CE C

5.Preismarkierungs auf & abrundungsrechngung

A 0 2 3 F

200+(P x 20%)=P

2000 [÷] 20 [MU]

2'500.00

P=

2000

=2'500.00

[MU]

500.00

5/4

1- 20%

2500–2000 = 500.00

2000 [÷] 20 [+/–] [MU]

1'666.67

200–(P x 20%)=P

P=

2000

=1'666.67

1+ 20%

18000 - 15000

x100%

18000 [–] 15000 [MU]

20.00

15000

= 20.00%

6.Steuerberechnung

A 0 2 3 F

100+TAX(3%)

3 [RATE] [+TAX]

3.

%

= 103

100 [+TAX]

+TAX

103.

TAX

Steuersumme = 3

[+TAX]

3.

3 = Steuersumme

103 = Wert mit steuersumme

206–TAX(3%)

[

ON

] [RATE] [–TAX]

3.

%

CE C

–TAX

= 200

206 [–TAX]

200.

TAX

Steuersumme = 6

[–TAX]

6.

6 = Steuersumme

200 = Wert ohne steuersumme

File name: D854_German version : 04.11.05

245x72mm(12.25x72mm)