Citizen SDC-620II User Manual

SDC-620II

HDBMD492139 XXX

* POWER SUPPLY

English

CITIZEN model SDC-620II is a dual-powered (high power solar + back-up battery) calculator operative under any lighting conditions. -Auto power-off function-

The calculator switches the power off automatically if there has been no key entry for about 9 minutes.

-Battery change-

If the back-up battery needs to be changed, open the lower cabinet to remove the old battery and insert a new battery in the indicated polarity. After changing battery, please use a metal, elliptical object to press the RESET pad on printed circuit board.

* KEY INDEX		English
[ ONC ] : Power on / Clear key	[CE] : Clear entry
[00t0] : Shift-back key.	[M+] : Memory plus key
[M–] : Memory minus key	[+/–] : ±Sign change key
[MU] : Mark-up / Mark-down Key	[GT] : Grand total key

[MRC] : Memory recall key / Memory clear key [RATE] : Tax Rate Setting Key

[STOR+ TAXE] : Price with Tax key

To store tax rate when pressing [RATE] and [+TAX] keys. [RECAL- TAX L] : Price without Tax key

To recall tax rate when pressing [RATE] and [–TAX] keys.

A 0 2 3 F

Decimal place selection switch

– F –

Floating decimal mode

– 0 – 2 – 3 – Fixed decimal mode

– A –

ADD–mode automatically enters the monetary

decimal in addition and subtraction calculations

5/4

Round up / Round-off / Round-down switch

The Signs Of The Display Mean The Following:

M : Memory

TAX : Amount of tax

– : Minus (or negative)

–TAX : Price excluding tax

E : Overflow-error

+TAX : Price including tax

GT Grand total

RATE : Tax rate setting

% : Tax rate stored

* OPERATION EXAMPLES

English

1. Calculation Examples

Before performing each calculation, press the [ ON ] key.

C

Example

Key operation

Display

A 0 2 3 F

2 x 3 = 6

2 [x] 2 [CE] 3 [=]

GT

6.

7 x 9 = 63

7 [ ] [x] 9 [=]

GT

63.

300 x 27% = 81

300 [x] 27 [%]

GT

81.

11.2

x 100% = 20%

11.2 [ ] 56 [%]

GT

20.

56

300+(300x40%)=420

300 [+] 40 [%]

GT

420.

300–(300x40%)=180

300 [–] 40 [%]

GT

180.

1400 x 12% = 168

1400 [x] 12 [%]

GT

168.

6 + 4 + 7.5 = 17.5

6 [+] 4 [+] 7.5 [=]

GT

17.5

5 x 3 0.2 = 75

[ ONC ] 5 [x] 3 [ ] 0.2 [=]

GT

75.

8 4 x 3.7 + 9 =16.4

8 [ ] 4 [x] 3.7 [+] 9 [=]

GT

16.4

54 = 625

5 [x] [=] [=] [=]

GT

625.

1 / 2 = 0.5

2 [÷] [=]

GT

0.5

1

= 0.0625

2 [x] 3 [+] 10 [ ] [=]

GT

0.0625

(2 x 3 + 10)

A 0 2 3 F

$14.90+$0.35–$1.45+

1490 [+] 35 [–] 145

145.

5/4

$12.05=$25.85

[+] 1205 [=]

GT

25.85

2. Memory Calculation

A 0 2 3 F

(12 x 4) – (20 2)

[MRC] [ ON ]

0.

C

5/4

= 38

12 [x] 4 [M+] 20 [ ] 2 [M–] M

10.

[MRC]

M

38.

[MRC] [ ON ]

0.

C

3. Constant Calculation

GT

A 0 2 3 F

2 + 3 = 5

2 [+] 3 [=]

5.

4 + 3 = 7

4 [=]

GT

7.

3 x 4 = 12

3 [x] 4 [=]

GT

12.

3 x 6 = 18

6 [=]

GT

18.

4. Overflow Error Clear

123456789012 x 10000

123456789012

123’456’789’012.

= 1'234.56789012 x 1012

[x] 100000 [00t0]

10000.

[=]

E

1’234.56789012

[ ON ]

0.

C

5. PRICE MARK-UP & DOWN CALCULATION

A 0 2 3 F

2000+(P x 20%)=P

2000 [ ] 20 [MU]

2'500.00

P=

2000

=2'500.00

[MU]

500.00

5/4

1- 20%

2500–2000 = 500.00

2000 [ ] 20 [+/–] [MU]

1'666.66

2000–(P x 20%)=P

P=

2000

=1'666.66

1+ 20%

18000 - 15000

x100%

18000 [–] 15000 [MU]

20.00

15000

= 20.00%

6. GT-MEMORY

Pressing [GT] twice before you operate GT function.

A 0 2 3 F 20 + 10 = 30					[GT] [GT] 20 [+] 10 [=]	GT	30.
			45 – 25 = 20		45 [–] 25 [=]	GT	20.
			50 x 3 = 150		50 [x] 3 [=]	GT	150.
			total = 200		[GT]	GT	200.
			200 x 15% = 30		[x] 15 [%]	GT	30.
			200 + (200 x 15%)		[GT]	GT	230.
=230					[GT]		230.
					[ ON ]		0.
					C
All calculation results are automatically accumulated in GT
7. Tax Calculation
A 0 2 3 F 100+TAX(3%)=103					3 [RATE] [+TAX]	3.	%
5/4			Tax sum=3		100 [+TAX]	103.	+TAX
					[+TAX]	3.	TAX
			3=Tax sum	103=Tax inclusive value
			206 – TAX(3%)		[ ONC ] [RATE]	3.	%
=200					[–TAX]
			Tax sum		100 [–TAX]	200.	–TAX
=6					[–TAX]	6.	TAX
			6=Tax sum	200=Tax exclusive value

File name: D492_IB_English_041118.doc	Date : 2004/11/19
SIZE : 280x72mm ( :140x72mm)

* ALIMENTACIÓN

Español

Modelo CITIZEN SDC-620II funciona gracias a un mecanismo de doble carga (luz solar y batería de apoyo), lo cual le permite operar bajo cualquier condición de iluminación.

-Función de desconexión automática-

La calculadora se apaga automáticamente si no ha sido utilizada durante 9 minutos aproximadamente.

-Reemplazado de la pila-

Si la pila de apoyo necista ser reemplazada, quite los tornillos del departamento inferior y sustituya la pila gastada por una nueva. Coloque la pila en su posicion correcta, con la polaridad indicada. Después de cambiar la batería pulse la almohadilla RESET en la tarjeta de circuito impreso con un objeto metálico elíptico.

* TECLADO INFORMATIVO

Español

[ ONC ] : Tecla de encendido / Tecla de borrar entrada.

[00t0] : Tecla de anular el digito ultimado		[CE] : Borrar
[M+] : Tecla de memoria positiva	[+/–] : ±Tecla de cambio de signo
[M–] : Tecla de memoria negativa	[GT] : Tecla de importe total

[MRC] : Tecla de borrar de memoria / Tecla de limpieza de memoria [MU] : Tecla de subir o bajar precios

[RATE] : Teclado de Puesta de Proporción de lmpuesto

[STOR+ TAXE] : Precio con la tecla de tasa Para almacenar el índice de la

tasa cuando se presionan las teclas [RATE] y [+TAX].

[RECALL- TAX ] : Precio sin la tecla de tasa Para recobrar el índice de la tasa cuando se presionan las teclas [RATE] y [–TAX] .

A 0 2 3 F		Selector del lugar decimal
– F –		Modo decimal flotante
– 0 – 2 – 3 – Modo decimal flotante
– A –		Modo ADD: ingresa automáticamente el decimal
		monetario en cálculos de suma y resta
5/4		Redondeo hacia arriba / Sin redondeo / Redondeo
		hacia abajo

Los signos del visor significan lo siguiente:

M : Memoria

TAX : Cantidad de tasa

– : Menos (o negativo)

–TAX : Precio excluyendo la tasa

E : Error de desbordamiento

+TAX : Precio incluyendo la tasa

GT : Importe total

RATE : Ajuste del índice de la tasa

% : Índice de la tasa almacenada

* EJEMPLO DE FUNCIONES

Español

1.Ejemplos de calculación

Presione la tecla [ ON

] antes de cada cálculo.

C

Operación con la tecla

Visualización

Ejemplo

A 0 2 3 F

2 x 3 = 6

2 [x] 2 [CE] 3 [=]

GT

6.

7 x 9 = 63

7 [ ] [x] 9 [=]

GT

63.

300 x 27% = 81

300 [x] 27 [%]

GT

81.

11.2

x 100% = 20%

11.2 [ ] 56 [%]

GT

20.

56

300+(300x40%)=420

300 [+] 40 [%]

GT

420.

300–(300x40%)=180

300 [–] 40 [%]

GT

180.

1400 x 12% = 168

1400 [x] 12 [%]

GT

168.

6 + 4 + 7.5 = 17.5

6 [+] 4 [+] 7.5 [=]

GT

17.5

5 x 3 0.2 = 75

[ ONC ] 5 [x] 3 [ ] 0.2 [=]

GT

75.

8 4 x 3.7 + 9 =16.4

8 [ ] 4 [x] 3.7 [+] 9 [=]

GT

16.4

54 = 625

5 [x] [=] [=] [=]

GT

625.

1 / 2 = 0.5

2 [÷] [=]

GT

0.5

1

= 0.0625

2 [x] 3 [+] 10 [ ] [=]

GT

0.0625

(2 x 3 + 10)

A 0 2 3 F

$14.90+$0.35–$1.45+

1490 [+] 35 [–] 145

145.

5/4

$12.05=$25.85

[+] 1205 [=]

GT

25.85

2. Cálculo de memoria

A 0 2 3 F

(12 x 4) – (20 2)

[MRC] [ ONC ]

0.

5/4

= 38

12 [x] 4 [M+] 20 [ ] 2 [M–] M

10.

[MRC]

M

38.

[MRC] [ ON ]

0.

C

3. Constante

GT

A 0 2 3 F

2 + 3 = 5

2 [+] 3 [=]

5.

4 + 3 = 7

4 [=]

GT

7.

3 x 4 = 12

3 [x] 4 [=]

GT

12.

3 x 6 = 18

6 [=]

GT

18.

4. Limpieza de error de desbordamiento

123456789012 x 10000

123456789012

123’456’789’012.

= 1'234.56789012 x 1012

[x] 100000 [00t0]

10000.

[=]

E

1’234.56789012

[ ON ]

0.

C

5. CÁLCULO DE SUBIR O BAJAR PRECIOS

A 0 2 3 F

2000+(P x 20%)=P

2000 [ ] 20 [MU]

2'500.00

P=

2000

=2'500.00

[MU]

500.00

5/4

1- 20%

2500–2000 = 500.00

2000 [ ] 20 [+/–] [MU]

1'666.66

2000–(P x 20%)=P

P=

2000

=1'666.66

1+ 20%

18000 - 15000

x100%

18000 [–] 15000 [MU]

20.00

15000

=20.00%

6.MEMÓRIA GT

Presionar [GT] dos veces antes de que usted operere con la función GT.

A 0 2 3 F 20 + 10 = 30		[GT] [GT] 20 [+] 10 [=]		GT	30.
	45 – 25 = 20	45	[–] 25 [=]	GT	20.
	50 x 3 = 150	50	[x] 3 [=]	GT	150.
	total = 200	[GT]		GT	200.
	200 x 15% = 30	[x] 15 [%]		GT	30.
	200 + (200 x 15%)	[GT]		GT	230.
=230		[GT]			230.
		[ ON ]			0.
		C

Todos los resultados del cálculo son acumulados automáticamente en el GT

7. Cálculo de impuestos

A 0 2 3 F

5/4

100+TAX(3%)=103	3 [RATE] [+TAX]	3.	%
Suma de impuesto =3	100 [+TAX]	103.	+TAX
	[+TAX]	3.	TAX
3= Suma de impuesto	103= Valor con impuesto
206 – TAX(3%)	[ ONC ] [RATE]
=200	[–TAX]	3.	%
Suma de impuesto =6	100 [–TAX]	200.	–TAX
	[–TAX]	6.	TAX
6= Suma de impuesto	200= Valor sin impuesto

File name: D492_IB_Spanish_041118.doc

Date : 2004/11/19

SIZE : 280x72mm ( :140x72mm)

* FONTE DE ALIMENTACÃO

Português

CITIZEN modelo SDC-620II tem dupla fonte de alimentação de energia (energia solar e bateria de reserva), permitindo operar sob qualquer condição de iluminação.

-Função Auto power-off(desligamento automático)-

A calculadora desliga automáticamente, caso nenhum a tecla seja utilizada por aproximadamente 9 minutos.

-Troca de bateria-

Se for necessário trocar a bateria de reserva, remova a bateria usada, abrindo a tampa inferior e coloque uma bateria nova, observando a polaridade indicada. Depois de trocar a bateria, use um objeto metálico e elíptico para pressionar a tecla RESET na placa de circuito impresso.

* ÍNDICE DE TECLAS		Português
[ ONC ] : Power on / Clear key.	[CE] :Limpar.
[00t0] : Tecla de mudança de digito	[+/–] : Tecla para mudar Sinal ±
[M+] : Tecla de mais da memoria	[M–] : Tecla de menos da memoria

[MRC] : Tecla da rechamada da memória./ Tecla para limpar a memória. [MU] : Tecla para Marca Preço para cima/baixo

[GT] : Tecla do Grande Total

[RATE] : Tecla para Ajuste do Índice de Taxa [STOR+ TAXE] : Tecla para o preço com a taxa

Para armazenar índice de taxa pressionando teclas

[RATE] e [+TAX]

[RECALL- TAX ] : ecla para o preço sem a taxa

		Para rechamar o índice de taxa pressionando teclas
		[RATE] e [–TAX]
A 0 2 3 F		Comutador para seleção de casa decimal
		Modalidade de decimal flutuante
– F –
– 0 – 2 – 3 – Modalidade de decimal fixo
– A –		Modalidade ADICIONAR entra automaticamente a
		decimal monetária em cálculos de adição e subtração.
5/4		Arredondamento para cima / Truncamento /
		Arredondamento para baixo

Os Sinais do Visor Significam o Seguinte:
M : Memória	TAX : Quantia de taxa
– : Menos ( ou negativo)	–TAX : Preço excluindo a taxa
E : Erro por transbordamento.	+TAX : Preço incluindo a taxa
GT : Grande total.	RATE : Ajuste do índice da taxa

% : Índice da taxa armazenada

* EXEMPLOS DE OPERACÃO

Português

1. Exemplo de calculos

Antes de executar cada cálculo, pressione a tecla [ ON ].

C

Exemplo

Operação com a tecla

Visualização

A 0 2 3 F

2 x 3 = 6

2 [x] 2 [CE] 3 [=]

GT

6.

7 x 9 = 63

7 [ ] [x] 9 [=]

GT

63.

300 x 27% = 81

300 [x] 27 [%]

GT

81.

11.2

x 100% = 20%

11.2 [ ] 56 [%]

GT

20.

56

300+(300x40%)=420

300 [+] 40 [%]

GT

420.

300–(300x40%)=180

300 [–] 40 [%]

GT

180.

1400 x 12% = 168

1400 [x] 12 [%]

GT

168.

6 + 4 + 7.5 = 17.5

6 [+] 4 [+] 7.5 [=]

GT

17.5

5 x 3 0.2 = 75

[ ONC ] 5 [x] 3 [ ] 0.2 [=]

GT

75.

8 4 x 3.7 + 9 =16.4

8 [ ] 4 [x] 3.7 [+] 9 [=]

GT

16.4

54 = 625

5 [x] [=] [=] [=]

GT

625.

1 / 2 = 0.5

2 [÷] [=]

GT

0.5

1

= 0.0625

2 [x] 3 [+] 10 [ ] [=]

GT

0.0625

(2 x 3 + 10)

A 0 2 3 F

$14.90+$0.35–$1.45+

1490 [+] 35 [–] 145

145.

5/4

$12.05=$25.85

[+] 1205 [=]

GT

25.85

2. Memória

A 0 2 3 F

(12 x 4) – (20 2)

[MRC] [ ON ]

0.

C

5/4

= 38

12 [x] 4 [M+] 20 [ ] 2 [M–]

M

10.

[MRC]

M

38.

[MRC] [ ON ]

0.

C

3. Constante

GT

A 0 2 3 F

2 + 3 = 5

2 [+] 3 [=]

5.

4 + 3 = 7

4 [=]

GT

7.

3 x 4 = 12

3 [x] 4 [=]

GT

12.

3 x 6 = 18

6 [=]

GT

18.

4. Erro por transbordamento

123456789012 x 10000

123456789012

123’456’789’012.

= 1'234.56789012 x 1012

[x] 100000 [00t0]

10000.

[=]

E

1’234.56789012

[ ON ]

0.

C

5. CÁLCULO PARA MARCAÇÃO DE PREÇO PARA CIMA & PARA BAIXO

A 0 2 3 F			2000+(P x 20%)=P						2000 [ ] 20 [MU]		2'500.00
			P=		2000	=2'500.00			[MU]		500.00
5/4
			1- 20%
			2500–2000 = 500.00						2000 [ ] 20 [+/–] [MU]		1'666.66
			2000–(P x 20%)=P
			P=		2000		=1'666.66
					1+ 20%
				18000 - 15000				x100%	18000 [–] 15000 [MU]		20.00
			15000
			= 20.00%
6. GT-MEMÓRIA
Pressione [GT] duas vezes antes de operar a função GT.										GT
A 0 2 3 F			20 + 10 = 30						[GT] [GT] 20 [+] 10 [=]		30.
			45 – 25 = 20						45 [–] 25 [=]	GT	20.
			50 x 3 = 150						50 [x] 3 [=]	GT	150.
			total = 200						[GT]	GT	200.
			200 x 15% = 30						[x] 15 [%]	GT	30.
			200 + (200 x 15%)						[GT]	GT	230.
			=230						[GT]		230.
									[ ON ]		0.
									C

Todos os resultados de cálculo são automaticamente acumulados em GT.

7. Cálculo da Taxa

A 0 2 3 F

5/4

100+TAX(3%)=103	3 [RATE] [+TAX]	3.	%
Soma da Taxa =3	100 [+TAX]	103.	+TAX
	[+TAX]	3.	TAX
3= Soma da Taxa	103= Valor com taxa incluída
206 – TAX(3%)	[ ONC ] [RATE]	3.	%
=200	[–TAX]
Soma da Taxa =6	100 [–TAX]	200.	–TAX
	[–TAX]	6.	TAX
6= Soma da Taxa	200= Valor excluído de Taxa

File name: D492_IB_Portuguese_041118.doc

Date : 2004/11/19

SIZE : 280x72mm ( :140x72mm)

* STROMVERSORGUNG

Deutsch

Das CITIZEN Modell SDC-620II wird durch 2 voneinander unabhängigen Energiequellen versorgt (Entweder durch eine sehr starke Solarzelle oder durch eine Batterie). Der Rechner arbeitet selbst unter schlechtesten Lichtbedingungen.

-Automatische Ausschaltung-

Ist der Rechner 9 Minuten nicht in Betrieb, schaltet er sich automatisch ab.

-Batteriewechsel-

Soltte die batterie gewechselt werden, entfernen Sie bitte die Schrauben vom unterteil und tauschen die alte gegen eine neue batterie aus. Beachten Sie, daß die batterie richtig, entsprechend der polarität, eingelegt wird. Drücken Sie nach dem Auswechseln der Batterie mit einem runden metallenem Objekt auf das RESET Feld auf der bedruckten Platine.

* ERKLARUNGEN VON SCHLUSSEL			Deutsch
[ ONC ] : An / Eingabe löschen.	[CE] : Löschen Taste
[00t0] : Rechts schub taste.	[M+] : Speicher Plus-Taste
[M–] : Speicher Minus-Taste	[+/–] : ±Vorzeicheneingabetaste

[MRC] : Speicher Abruf-Taste / Speicher Löschen-Taste [MU] : Preisangabe-oben/unten Taste

[GT] : Gesammtsummentaste [RATE] : Einstelltaste für Steuersatz

[STOR+ TAXE] : Preis mit TAX-Taste Um Steuerrate zu speichern wenn

[RATE] und [+TAX]-Tasten gedrϋckt werden.

[RECAL- TAX L] : Preis ohme TAX-Taste Den Steuersatz rückrufen beim Dreck [RATE] und [–TAX] -Tasten.

A 0 2 3 F

–F –

–0 – 2 – 3 –

–A –

5/4

Schalter für Dezimalauswahlplatz

Gleitkomma-Modus

Festkomma-Modus

ADD–Modus gibt bei Additionsund Subtraktionsrechnungen automatisch das Dezimalkomma an.

Aufrunden, Abrundenschalter

Die Zeichen in der Anzeige haben die folgende Bedeutung:

M : Speicher	TAX : Steuerbetrag
– : Minus ( oder negative)	–TAX : Preis ohne Steuern
E : Überlauffehler	+TAX : Preis mit Steuern
GT : Gesamtsumme	RATE : Steuerraten-Einstellung
% : Steuerrate gespeichert
* BEISPIEL FÜR DEN bETRIEB		Deutsch

1. Berechnungsbeispiele

Vor jeder Berechnung bitte die [ ONC ] Taste drücken.

Anzeige

Beispiel

Tastenkombination

A 0 2 3 F

2 x 3 = 6

2

[x] 2 [CE] 3 [=]

GT

6.

7 x 9 = 63

7

[ ] [x] 9 [=]

GT

63.

300 x 27% = 81

300 [x] 27 [%]

GT

81.

11.2

11.2 [ ] 56 [%]

GT

56 x 100% = 20%

20.

GT

300+(300x40%)=420

300 [+] 40 [%]

420.

300–(300x40%)=180

300 [–] 40 [%]

GT

180.

1400 x 12% = 168

1400 [x] 12 [%]

GT

168.

6 + 4 + 7.5 = 17.5

6

[+] 4 [+] 7.5 [=]

GT

17.5

5 x 3 0.2 = 75

[ ONC ] 5 [x] 3 [ ] 0.2 [=]

GT

75.

8 4 x 3.7 + 9 =16.4

8

[ ] 4 [x] 3.7 [+] 9 [=]

GT

16.4

54 = 625

5

[x] [=] [=] [=]

GT

625.

1 / 2 = 0.5

2

[÷] [=]

GT

0.5

1

[x] 3 [+] 10 [ ] [=]

GT

(2 x 3 + 10) = 0.0625

2

0.0625

A 0 2 3 F

$14.90+$0.35–$1.45+

1490 [+] 35 [–] 145

145.

5/4

$12.05=$25.85

[+] 1205 [=]

GT

25.85

2. Speicher

A 0 2 3 F		(12 x 4) – (20 2)	[MRC] [ ON ]		0.
			C
5/4		= 38	12 [x] 4 [M+] 20 [ ] 2 [M–]	M	10.
			[MRC]	M	38.
			[MRC] [ ON ]		0.
			C

3. Konstant

A 0 2 3 F 2 + 3 = 5			2	[+] 3 [=]	GT	5.
		4 + 3 = 7	4	[=]	GT	7.
		3 x 4 = 12	3	[x] 4 [=]	GT	12.
		3 x 6 = 18	6	[=]	GT	18.

4. Korrektur und Überlauffehler

123456789012 x 10000									123456789012		123’456’789’012.
= 1'234.56789012 x 1012									[x] 100000 [00t0]		10000.
									[=]	E	1’234.56789012
									[ ON ]		0.
									C
5. PREISMARKIERUNGS AUF & ABRUNDUNGSRECHNGUNG
A 0 2 3 F			2000+(P x 20%)=P							2000 [ ] 20 [MU]	2'500.00
			P=		2000	=2'500.00				[MU]	500.00
5/4
			1- 20%
			2500–2000 = 500.00							2000 [ ] 20 [+/–] [MU]	1'666.66
			2000–(P x 20%)=P
			P=		2000		=1'666.66
					1+ 20%
				18000 - 15000				x100%		18000 [–] 15000 [MU]	20.00
			15000

= 20.00%

6. GT-SPEICHER

Drücken Sie zweimal [GT], bevor Sie die GT-Funktion ausführen.

A 0 2 3 F 20 + 10 = 30		[GT] [GT] 20 [+] 10 [=]		GT	30.
	45 – 25 = 20	45	[–] 25 [=]	GT	20.
	50 x 3 = 150	50	[x] 3 [=]	GT	150.
	total = 200	[GT]		GT	200.
	200 x 15% = 30	[x] 15 [%]		GT	30.
	200 + (200 x 15%)	[GT]		GT	230.
=230		[GT]			230.
		[ ON ]			0.
		C

Alle Berechnungsergebnisse werden automatisch im GT akkumuliert.

7. Steuerberechnung

A 0 2 3 F

5/4

100+TAX(3%)=103	3 [RATE] [+TAX]	3.	%
Steuersumme =3	100 [+TAX]	103.	+TAX
	[+TAX]	3.	TAX
3= Steuersumme	103= Wert mit Steuersumme
206 – TAX(3%)	[ ONC ] [RATE]
=200	[–TAX]	3.	%
Steuersumme =6	100 [–TAX]	200.	–TAX
	[–TAX]	6.	TAX
6= Steuersumme	200= Wert ohne Steuersumme

File name: D492_IB_German_041118.doc

Date : 2004/11/19

SIZE : 280x72mm ( :140x72mm)