Cisco Systems CTSPHDS, 1080P4X, CABHDMIPHD4XS2, 720P, 1080P12X User Manual

0 (0)
Cisco Systems CTSPHDS, 1080P4X, CABHDMIPHD4XS2, 720P, 1080P12X User Manual

 

Cisco TelePresence PrecisionHD Camera

 

 

PrecisionHD Camera User guide

 

 

 

 

 

 

 

Contents

Introduction

The physical interface

Connecting the camera

Video output formats

Daisy chaning

Appendices

 

 

 

 

 

 

 

 

 

Software: TC5.1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

June 2012

 

 

 

 

 

 

PrecisionHD

PrecisionHD

PrecisionHD

PrecisionHD

1080p12x

1080p4x

1080p4xS2

720p

Cisco TelePresence PrecisionHD Camera

User Guide

D14640.09 PrecisionHD 1080p-720p Camera User Guide, June 2012.

1

www.cisco.com

© 2010-2012 Cisco Systems, Inc. All rights reserved.

 

 

Cisco TelePresence PrecisionHD Camera

 

 

PrecisionHD Camera User guide

 

 

 

 

 

 

 

Contents

Introduction

The physical interface

Connecting the camera

Video output formats

Daisy chaning

Appendices

What’sTA - ToC - in

Hidden text

anchor

this guide?

The top menu bar and the entries in the Table of Contents are all hyperlinks, just click on them to go to the topic.

We recommend you visit our web site regularly for updated versions of the user documentation. Go to: http://www.cisco.com/go/telepresence/ docs

Table of Contents

 

Introduction

 

About this guide...................................................................

4

User documentation.........................................................

4

The physical interface

 

The PrecisionHD Camera 1080p12x...................................

6

The PrecisionHD Camera 1080p4x.....................................

7

The PrecisionHD Camera 1080p4xS2.................................

8

The PrecisionHD Camera 720p...........................................

9

Connecting the camera to the codec

 

SX20 Codec configurations................................................

11

Codec C20 configurations..................................................

11

Codec C40 configurations..................................................

11

Codec C60 configurations..................................................

12

Codec C90 configurations..................................................

12

Camera cables....................................................................

13

HDMI cable......................................................................

13

HD–SDI cable..................................................................

13

HDMI to DVI–D adapter...................................................

13

Pin-out for cables...........................................................

13

Pin out—Custom Plug Camera Cable..............................

14

Pin out— Custom to HDMI and RJ45 Camera Cable......

15

Pin out— Custom to HDMI and DB9P Camera Cable.....

16

Video output formats

 

PrecisionHD 1080p12x......................................................

18

Video output formats.....................................................

18

Line voltage frequency...................................................

18

DIP switch table.............................................................

18

Daisy chaining the cameras

 

Daisy chaining of the PrecisionHD 1080p12x....................

20

Daisy chaining of the PrecisionHD 720p............................

21

Daisy chaining of the PrecisionHD 1080p4x......................

22

Appendices

 

Controlling cameras using the VISCA™ protocol...............

24

RS–232 Commands and inquiries..................................

24

The VISCA™/RS–232 control protocol...............................

25

VISCA message format..................................................

25

Network and interface commands.................................

26

Push messages..............................................................

26

Camera commands........................................................

26

PTZF - movement commands.......................................

27

Inquiries..........................................................................

29

Software upload commands..........................................

30

Debug commands for Cisco cameras...........................

30

Other commands...........................................................

30

Video mode selection....................................................

31

DIP Switch settings........................................................

31

DIP switch table.............................................................

31

Technical specifications.....................................................

32

PrecisionHD Camera 1080p4x......................................

32

PrecisionHD Camera 1080p4xS2..................................

32

PrecisionHD Camera 1080p4x* ....................................

32

PrecisionHD Camera 1080p12x.....................................

33

PrecisionHD Camera 720p............................................

33

D14640.09 PrecisionHD 1080p-720p Camera User Guide, June 2012.

2

www.cisco.com

© 2010-2012 Cisco Systems, Inc. All rights reserved.

 

 

Cisco TelePresence PrecisionHD Camera

 

 

PrecisionHD Camera User guide

 

 

 

 

 

 

 

Contents

Introduction

The physical interface

Connecting the camera

Video output formats

Daisy chaning

Appendices

Chapter 1

Introduction

PrecisionHD

PrecisionHD

PrecisionHD

PrecisionHD

1080p12x

1080p4x

1080p4xS2

720p

D14640.09 PrecisionHD 1080p-720p Camera User Guide, June 2012.

3

www.cisco.com

© 2010-2012 Cisco Systems, Inc. All rights reserved.

 

 

Cisco TelePresence PrecisionHD Camera

 

 

PrecisionHD Camera User guide

 

 

 

 

 

 

 

Contents

Introduction

The physical interface

Connecting the camera

Video output formats

Daisy chaning

Appendices

About this guide

The purpose of this document is to describe the camera matters specific to the PrecisionHD cameras. The guide is mainly focused on the PrecisionHD 1080p cameras. Some information about the PrecisionHD 720p is included.

Applies to the products listed below.:

Cisco TelePresence PrecisionHD Camera – 1080p12x

Cisco TelePresence PrecisionHD Camera – 1080p4x

Cisco TelePresence PrecisionHD Camera – 1080p4xS2

Cisco TelePresence PrecisionHD Camera – 720p

User documentation

The user documentation for the Cisco TelePresence systems, running the TC software, have several guides suitable to various user groups.

Video conference room primer

Video conference room acoustics guidelines

Getting started guide for the TelePresence systems

User guide for the TelePresence systems

Administrator guides for the TelePresence systems

Camera user guide for the PrecisionHD cameras

API reference guides for the Codec C Series

TC Console user guide for the Codec C Series

Physical interfaces guides for the Codec C Series

Regulatory compliance and safety information guides

Legal & license information for products using TC software

Download the user documentation

Go to: http://www.cisco.com/go/telepresence/docs and select your product to see the user documentation for your product.

D14640.09 PrecisionHD 1080p-720p Camera User Guide, June 2012.

4

www.cisco.com

© 2010-2012 Cisco Systems, Inc. All rights reserved.

 

 

Cisco TelePresence PrecisionHD Camera

 

 

PrecisionHD Camera User guide

 

 

 

 

 

 

 

Contents

Introduction

The physical interface

Connecting the camera

Video output formats

Daisy chaning

Appendices

Chapter 2

The physical interface

PrecisionHD

PrecisionHD

PrecisionHD

PrecisionHD

1080p12x

1080p4x

1080p4xS2

720p

D14640.09 PrecisionHD 1080p-720p Camera User Guide, June 2012.

5

www.cisco.com

© 2010-2012 Cisco Systems, Inc. All rights reserved.

 

 

Cisco TelePresence PrecisionHD Camera

 

 

PrecisionHD Camera User guide

 

 

 

 

 

 

 

Contents

Introduction

The physical interface

Connecting the camera

Video output formats

Daisy chaning

Appendices

The PrecisionHD Camera 1080p12x

The orange LED illuminates while in a call and flickers when there is an incoming call.

The lens hood is detachable.

We recommend that you mount it to prevent stray light from disturbing your video experience.

Snap it on gently.

Power

Camera

Supply

Control

The green LED is continuously illuminated when power is On, but it flickers when receiving signals from the remote control.

When mounted (upside down) in the Profile 65” and the Profile 65” Dual, the LED is not visible.

Extra Camera Out and for daisy chaining*

HDMI and HD-SDI

HDMI is the main video source. The maximum resolution is 1080p60.

HD-SDI* is the secondary video source. The maximum resolution is 1080p30.

The HDMI and HD-SDI* can be used simultaneously. The maximum resolution is 1080p30, if you want both to run with the same resolution.

Camera control

Camera control is used for controlling the pan, tilt and zoom, and for powering up the camera.

Power

When the camera is used with a Cisco Codec, power will be supplied through Camera Control cable.

When the camera is used with non-Cisco codecs, you may have to connect power separately.

Kensington lock

HDMI

Ethernet

Video Out

RJ45

HD-SDI Out*

Extra camera

For multi-camera setup, e.g. when you connect cameras in daisy chain*:

The first camera in the chain is powered by the camera control cable. The next must use the 12V DC Power in.

Use an extra camera cable between the Extra Camera sockets.

Ethernet

For software upgrades on daisy chained cameras. Requires software version TC3.0 or higher on the Codec C–series.

Kensington lock

The Kensington lock may be used to prevent the camera to be moved from its place or to prevent theft.

* Not supported with Codec C20.

D14640.09 PrecisionHD 1080p-720p Camera User Guide, June 2012.

6

www.cisco.com

© 2010-2012 Cisco Systems, Inc. All rights reserved.

 

 

Cisco TelePresence PrecisionHD Camera

 

 

PrecisionHD Camera User guide

 

 

 

 

 

 

 

Contents

Introduction

The physical interface

Connecting the camera

Video output formats

Daisy chaning

Appendices

The PrecisionHD Camera 1080p4x

Available with the Cisco TelePresence Quick Set C20.

The orange LED illuminates while in a call and flickers when there is an incoming call.

USB

HDMI

 

Video Out

The green LED is continuously illuminated when power is On, but it flickers when receiving signals from the remote control.

 

HDMI and Camera Control

 

HDMI video out

CAUTION! Do not pan or tilt the PrecisionHD 1080p4x

HDMI is the video out source.

camera by hand!

 

PrecisionHD 1080p4x: Maximum resolution is

 

The Quick Set C20 is shipped with the PrecisionHD

1080p30/720p60.

 

1080p 4x camera.

Camera control

NOTE: The early shipments of the Quick Set C20

Camera control is used for controlling the pan, tilt and

came with an interim version of the PrecisionHD

zoom, and for powering up the camera.

1080p4x camera (the PrecisionHD 1080p4x*

Daisy-chain control is not supported. The camera can be

camera).

used in a chain of multiple cameras but must be the last

 

 

camera in the chain.

* Available for a limited period of time. See the “Technical specifications” on page 32 section for details.

Kensington lock

Power Camera

Supply Control

Power

Use the supplied power adapter when connecting the power.

USB

For future use.

Kensington lock

The Kensington lock may be used to prevent the camera to be moved from its place or to prevent theft.

D14640.09 PrecisionHD 1080p-720p Camera User Guide, June 2012.

7

www.cisco.com

© 2010-2012 Cisco Systems, Inc. All rights reserved.

 

 

Cisco TelePresence PrecisionHD Camera

 

 

PrecisionHD Camera User guide

 

 

 

 

 

 

 

Contents

Introduction

The physical interface

Connecting the camera

Video output formats

Daisy chaning

Appendices

The PrecisionHD Camera 1080p4xS2

Available with the Cisco TelePresence SX20 Quick Set.

The orange LED illuminates while in a call and flickers when there is an incoming call.

Kensington lock

HDMI

Power

USB

Video Out and

Supply

 

 

 

Camera Control

 

 

The LED is continuously illuminated when the system is in use. It flickers when the system receives signals from the remote control and blinks when rebooting. The LED pulsates when the system is in Standby mode.

Pulsating

——– –——– –——– –——

Blinking

— — — — — — — — — — —

Flickering

••••••••••••••••••••••••••••••••••••••••••••

 

 

HDMI and Camera Control

Video Out

HDMI is the video out source.

PrecisionHD 1080p4xS2: Maximum resolution is 1080p60.

Camera control

Camera control is used for controlling the pan, tilt and zoom, and for powering up the camera.

Power

Use the supplied power adapter when connecting the power.

USB

For future use.

Kensington lock

The Kensington lock may be used to prevent the camera to be moved from its place or to prevent theft.

D14640.09 PrecisionHD 1080p-720p Camera User Guide, June 2012.

8

www.cisco.com

© 2010-2012 Cisco Systems, Inc. All rights reserved.

 

 

Cisco TelePresence PrecisionHD Camera

 

 

PrecisionHD Camera User guide

 

 

 

 

 

 

 

Contents

Introduction

The physical interface

Connecting the camera

Video output formats

Daisy chaning

Appendices

The PrecisionHD Camera 720p

The orange LED illuminates while in a call and flickers when there is an incoming call.

The lens hood (not mounted on the camera in the picture) is detachable.

We recommend that you mount it to prevent stray light from disturbing your video experience.

Snap it on gently.

VISCA

Power in

HDMI

Camera

Kensington

Daisy

12 V DC

video

control &

lock

chain

 

out

Power

 

The green LED is continuously illuminated when power is On, but it flickers when receiving signals from the remote control.

HDMI

HDMI is the main video source. The maximum resolution is 720p30.

Camera control

Camera control is used for controlling the pan, tilt and zoom, and for powering up the camera.

Power

When the camera is used with a Cisco Codec, power will be supplied through Camera Control cable.

When the camera is used with non-Cisco codecs, you may have to connect power separately.

Extra camera

If you want to connect cameras in a daisy chain*:

The first camera in the chain is powered by the camera control cable. The next must use the 12V DC Power in.

Use an extra camera cable between the Extra Camera sockets.

Kensington lock

The Kensington lock may be used to prevent the camera to be moved from its place or to prevent theft.

* Not supported with Codec C20

D14640.09 PrecisionHD 1080p-720p Camera User Guide, June 2012.

9

www.cisco.com

© 2010-2012 Cisco Systems, Inc. All rights reserved.

 

 

Cisco TelePresence PrecisionHD Camera

 

 

PrecisionHD Camera User guide

 

 

 

 

 

 

 

Contents

Introduction

The physical interface

Connecting the camera

Video output formats

Daisy chaning

Appendices

Chapter 3

Connecting the camera to the codec

PrecisionHD

PrecisionHD

PrecisionHD

PrecisionHD

1080p12x

1080p4x

1080p4xS2

720p

D14640.09 PrecisionHD 1080p-720p Camera User Guide, June 2012.

10

www.cisco.com

© 2010-2012 Cisco Systems, Inc. All rights reserved.

 

 

Cisco TelePresence PrecisionHD Camera

 

PrecisionHD Camera User guide

 

 

 

 

 

Contents

Introduction

 

The physical interface Connecting the camera

Video output formats

Daisy chaning

Appendices

SX20 Codec configurations

 

Codec C20 configurations

Codec C40 configurations

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Camera HDMI and camera contol

Connecting to the PrecisionHD Camera 1080p4xS2

Connect the combined custom HDMI and camera control cable:

From the HD VIDEO OUT connector on the 4xS2 camera.

To the CAMERA connector on the SX20. Visca™ protocol is supported.

Camera Camera control HDMI

Connecting to a PrecisionHD Camera

Connect the HDMI cable:

From the HD VIDEO OUT (HDMI) connector on the camera.

To the CAMERA (HDMI) connector on the Codec C20.

Connect the camera control cable:

From the CODEC CONTROL IN (RJ45) connector on the camera.

To the CAMERA CONTROL (RS–232) connector on the Codec C20. Visca™ protocol is supported.

HDMI 1

Camera

 

control

Connecting to a PrecisionHD Camera

Connect the HDMI cable:

From the HD VIDEO OUT (HDMI) connector on the camera.

To the HDMI 1 IN (HDMI) connector on the Codec C40.

Connect the camera control cable:

From the CODEC CONTROL IN (RJ45) connector on the camera.

To the CAMERA CONTROL (RS–232) connector on the Codec C40.

Codec connectors

1 Output connector

1 Input connector

D14640.09 PrecisionHD 1080p-720p Camera User Guide, June 2012.

11

www.cisco.com

© 2010-2012 Cisco Systems, Inc. All rights reserved.

 

Loading...
+ 23 hidden pages