Cisco PGW 2200 Softswitch Release 9.8
Software Installation and Configuration
Guide
November 2008
Americas Headquarters
Cisco Systems, Inc. 170 West Tasman Drive
San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000
800 553-NETS (6387) Fax: 408 527-0883
Text Part Number: OL-18083-01
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
CCDE, CCENT, Cisco Eos, Cisco HealthPresence, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence, Cisco WebEx, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0812R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
© <year> Cisco Systems, Inc. All rights reserved.
Customer Order Number:
|
|
|
|
|
|
|
C O N T E N T S |
|
|
|
|
|||
|
Preface ix |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Document Objectives |
ix |
|
|
|
|
|
|
|
|
|
|
|
|
|
Audience |
ix |
|
|
|
|
|
|
|
|
|
|
|
|
|
Related Documentation |
ix |
|
|
|
|
|
|
|
|
|
|
||
|
Obtaining Documentation and Submitting a Service Request x |
|
|
|
|
|
|
|||||||
|
Document Change History |
x |
|
|
|
|
|
|
|
|
|
|
||
|
Preparing for Sun Solaris Operating System and Cisco PGW 2200 Softswitch Software |
|||||||||||||
|
Installation |
1-1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Supported Platforms and Cisco Products 1-1 |
|
|
|
|
|
|
|
|
|||||
|
Solaris 10, Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Software Release |
|||||||||||||
|
Preinstallation Checklists |
1-1 |
|
|
|
|
|
|
|
|
|
|
||
|
Required Software Media |
1-2 |
|
|
|
|
|
|
|
|
|
|||
|
Minimum System Requirements |
1-2 |
|
|
|
|
|
|
|
|
||||
|
Required Site-Specific Information |
1-3 |
|
|
|
|
|
|
|
|
||||
|
Required Machine-Specific Information 1-3 |
|
|
|
|
|
|
|
||||||
|
Required Tasks |
1-3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Installing the Sun Solaris 10 Operating System |
|
2-1 |
|
|
|
|
|
|
|||||
|
Supported Platforms |
2-1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Supported Disk Drives |
2-1 |
|
|
|
|
|
|
|
|
|
|
||
|
Before You Start 2-2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cautions, Notes, and Tips |
2-2 |
|
|
|
|
|
|
|
|
|
|||
|
Loading the Sun Solaris 10 Operating System |
2-2 |
|
|
|
|
|
|
||||||
|
Devices on Supported Platforms |
2-3 |
|
|
|
|
|
|
|
|
||||
|
Installing the Sun Solaris 10 Operating System for Sparc-based Platforms |
2-3 |
|
|
|
|
||||||||
|
Installing the Sun Solaris 10 Operating System for Opteron-based Platforms |
2-13 |
|
|
|
|||||||||
|
Configuring Your Host |
2-50 |
|
|
|
|
|
|
|
|
|
|||
|
Platform-Specific Installation Procedures |
2-62 |
|
|
|
|
|
|
||||||
|
Loading the Sun Solaris 10 Operating Environment |
2-72 |
|
|
|
|
|
|
||||||
|
Installing the Sparc-based Solaris 10 Patches Package (CSCOh022) |
2-73 |
|
|
|
|
|
|||||||
|
Installing the Opteron-based Solaris 10 Patches Package (CSCOh032) |
2-75 |
|
|
|
|
|
|||||||
|
Installing the Solstice DiskSuite (CSCOh023) |
2-77 |
|
|
|
|
|
|
||||||
|
Rebooting from the Mirrored (Secondary) Disk on Sparc-based Platforms |
2-85 |
|
|
|
|||||||||
|
Rebooting from the Mirrored (Secondary) Disk on Opteron-based Platforms |
2-87 |
|
|
|
|||||||||
|
|
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide |
|
|
|
|||||||||
|
|
|
||||||||||||
|
OL-18083-01 |
|
|
|
|
|
|
|
|
|
|
|
iii |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Contents
|
|
|
Removing the Solstice DiskSuite |
2-88 |
|
|
|
|
|
|
|
|
|||
|
|
|
Installing the Log and Spool File Systems (CSCOh024) |
2-89 |
|
|
|
|
|
||||||
|
|
|
Uninstalling the Log and Spool File System |
2-97 |
|
|
|
|
|
|
|||||
|
|
|
Installing Cisco BAMS Archive Partition (CSCOh027) |
2-98 |
|
|
|
|
|
||||||
|
|
|
Installing the Sparc-based Communications and Alarm Software Package (CSCOh026) |
2-103 |
|
||||||||||
|
|
|
Installing the Opteron-based Communications Software Package (CSCOh036) |
2-118 |
|
|
|||||||||
|
|
|
Installing the Verification Test Suite Script Package (CSCOh021) |
2-129 |
|
|
|
|
|||||||
|
|
|
Using the SunVTS Test Package |
2-131 |
|
|
|
|
|
|
|
|
|||
|
|
|
Normal Unit Test 2-131 |
|
|
|
|
|
|
|
|
|
|
||
|
|
|
Running a Test in Brief Mode |
2-135 |
|
|
|
|
|
|
|
|
|||
|
|
|
Running a Test in Full Mode |
2-136 |
|
|
|
|
|
|
|
|
|||
|
|
|
vts_script Execution Times |
2-136 |
|
|
|
|
|
|
|
|
|
||
|
|
|
Removing the VTS Package (CSCOh021) 2-137 |
|
|
|
|
|
|
|
|||||
|
|
|
Configuring Lights-Out Management (LOM) or the Integrated Lights Out Manager (ILOM) |
2-138 |
|
||||||||||
|
|
|
Configuring LOM on Sun Fire V40z Platform |
2-138 |
|
|
|
|
|
|
|||||
|
|
|
Configuring ILOM on Sun Fire X4600 Platform |
|
2-141 |
|
|
|
|
|
|||||
|
|
|
Configuring ILOM on Sun Netra X4200 M2 Platform |
2-143 |
|
|
|
|
|
||||||
|
|
|
Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher |
3-1 |
|
|
|
||||||||
|
|
|
Before You Start |
3-1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cautions, Notes, and Tips |
3-2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Releases |
3-3 |
|
|
|||||||||
|
|
|
Installing Cisco PGW 2200 Softswitch Software on a Simplex System 3-3 |
|
|
|
|
||||||||
|
|
|
Installing the Cisco Security Package (CSCOh020) |
|
3-12 |
|
|
|
|
|
|
||||
|
|
|
Enabling Sudo |
3-15 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Installing the License File |
3-15 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Installing the License File if the Cisco PGW 2200 Softswitch is NOT Running |
3-16 |
|
|
|||||||||
|
|
|
Installing the License File if the Cisco PGW 2200 Softswitch is Running |
3-16 |
|
|
|
||||||||
|
|
|
Installing on a Fault Tolerant System |
3-17 |
|
|
|
|
|
|
|
|
|||
|
|
|
Configuring the Cisco PGW 2200 Softswitch Software |
4-1 |
|
|
|
|
|
||||||
|
|
|
Quick Guide to Configuring the Cisco PGW 2200 Softswitch Software |
4-1 |
|
|
|
|
|||||||
|
|
|
Before You Start |
4-2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Software Directory Structure 4-3 |
|
|
|
|
|
|
|
|
|
|||
|
|
|
Initial Cisco PGW 2200 Softswitch Software Configuration |
4-4 |
|
|
|
|
|
||||||
|
|
|
Parameters Required for Initial Setup |
4-7 |
|
|
|
|
|
|
|
|
|||
|
|
|
Using the Cisco MGC Environment Configuration Tool |
4-8 |
|
|
|
|
|
||||||
|
|
|
Configuring Groups and Users |
4-11 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Verifying the mgcgrp Group |
4-11 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adding a User with Full MML Privileges 4-11 |
|
|
|
|
|
|
|
|
||||
|
|
|
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide |
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|||||||
|
iv |
|
|
|
|
|
|
|
|
|
|
|
OL-18083-01 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Contents
Adding a User with Minimal MML Privileges 4-12 |
|
|||||||
Configuring SNMP Support Resources |
4-13 |
|
|
|
||||
Migrating the SNMP Configuration to a More Secure Environment (for Cisco PGW 2200 Softswitch |
||||||||
Release 9.3(2) or Later) |
4-14 |
|
|
|
|
|
|
|
Basic Tasks |
4-14 |
|
|
|
|
|
|
|
Before You Run the config-snmp Utility |
4-14 |
|
||||||
Running the config-snmp Utility |
4-15 |
|
|
|
||||
Adding an SNMP Community Entry 4-17 |
|
|
||||||
Deleting an SNMP COMMUNITY |
4-19 |
|
|
|||||
Adding a Trap Destination |
|
4-20 |
|
|
|
|
||
Deleting a Trap Destination |
4-22 |
|
|
|
||||
Activating the New Settings |
4-23 |
|
|
|
||||
Verifying the SNMP Configuration Migration |
4-24 |
|
||||||
Configuring the Execution Environment 4-25 |
|
|
|
|||||
Changing XECfgParm.dat File Parameters |
4-26 |
|
|
|||||
Changing XECfgParm.dat File Parameters in a Running Fault Tolerant System 4-27 |
||||||||
Configuring Basic System Information |
4-28 |
|
|
|||||
Specifying IP Addresses |
4-30 |
|
|
|
|
|
||
Configuring Engine Parameters |
4-32 |
|
|
|
|
|||
Setting the Call Cutoff Timer |
4-34 |
|
|
|
|
|||
Enabling Call Screening |
4-34 |
|
|
|
|
|
|
|
Configuring Call Detail Record File Output |
4-35 |
|
|
|||||
Configuring the Clearing Location and Default Location Parameters |
4-36 |
|||||||
Configuring Switchover |
4-39 |
|
|
|
|
|
|
|
Initializing the Provisioning Object Manager |
4-41 |
|
||||||
Configuring SCP Queries 4-42 |
|
|
|
|
|
|
||
Before You Start |
4-43 |
|
|
|
|
|
|
|
Modifying trigger.dat file parameters with provisioning commands |
4-43 |
|||||||
Configuring the trigger.dat File Attributes |
4-43 |
|
|
|||||
Configuring the Translation Type Attribute |
4-44 |
|
||||||
Sample trigger.dat File |
4-45 |
|
|
|
|
|
|
|
Initializing the Call Screening Database |
4-82 |
|
|
|
||||
.odbc.ini File Information |
4-83 |
|
|
|
|
|
||
Setting Up Replication |
4-83 |
|
|
|
|
|
|
|
Network Requirements |
4-84 |
|
|
|
|
|||
Initializing Database Replication |
4-85 |
|
|
|
||||
Verifying Database Replication |
4-86 |
|
|
|
|
|
Troubleshooting the Main Memory Database Replication 4-87 |
|
|
|
|
|
Displaying the Main Memory Database Replication Status |
4-87 |
|
|
|
|
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide |
|
|
|
|
|
|||||
|
OL-18083-01 |
|
|
v |
|
|
|
|
|
Contents
|
|
|
Verifying Database Synchronization 4-87 |
|
|
|
|
|
|
||||
|
|
|
Synchronizing Databases |
4-88 |
|
|
|
|
|
|
|||
|
|
|
Checking for Installation Errors 4-88 |
|
|
|
|
|
|
||||
|
|
|
Reinstalling CSCOga002 |
4-89 |
|
|
|
|
|
|
|||
|
|
|
Configuring Cisco ITP-Ls |
4-89 |
|
|
|
|
|
|
|
|
|
|
|
|
Configuring Disk Monitor During Initial Software Configuration 4-89 |
|
|
|
|
|
|||||
|
|
|
Configuring the Data Dumper |
4-90 |
|
|
|
|
|
|
|
||
|
|
|
Configuring the Data Dumper to Support Cisco BAMS |
4-92 |
|
|
|
|
|
||||
|
|
|
Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8 |
5-1 |
|
||||||||
|
|
|
Conditions for Migration |
5-1 |
|
|
|
|
|
|
|
|
|
|
|
|
Cautions and Notes |
5-2 |
|
|
|
|
|
|
|
|
|
|
|
|
Required Software |
5-3 |
|
|
|
|
|
|
|
|
|
|
|
|
License Installation |
5-3 |
|
|
|
|
|
|
|
|
|
|
|
|
Recording System Data |
5-3 |
|
|
|
|
|
|
|
|
|
|
|
|
Migration Overview |
5-4 |
|
|
|
|
|
|
|
|
|
|
|
|
Migration from Release 9.5 or 9.6 to Release 9.8 without Platform Changes |
|
5-5 |
|
|
||||||
|
|
|
Migrating the Second Cisco PGW 2200 Softswitch Software to Release 9.8 |
5-5 |
|
||||||||
|
|
|
Backing Up the Cisco PGW 2200 Softswitch Configuration Files |
5-5 |
|
|
|||||||
|
|
|
Installing Sun Solaris 10 |
5-8 |
|
|
|
|
|
|
|||
|
|
|
Loading the Sun Solaris 10 Operating Environment Packages |
5-8 |
|
|
|
|
|||||
|
|
|
Restoring Data Files |
5-9 |
|
|
|
|
|
|
|
||
|
|
|
Installing and Verifying the Cisco PGW 2200 Softswitch Software |
|
5-9 |
|
|
||||||
|
|
|
Migrating the First Cisco PGW 2200 Softswitch Software to Release 9.8 |
5-10 |
|
||||||||
|
|
|
Backing Up the Cisco PGW 2200 Softswitch Configuration Files |
5-11 |
|
|
|||||||
|
|
|
Installing Sun Solaris 10 |
5-13 |
|
|
|
|
|
|
|||
|
|
|
Loading the Sun Solaris 10 Operating Environment Packages |
5-14 |
|
|
|
||||||
|
|
|
Restoring Data Files |
5-14 |
|
|
|
|
|
|
|
||
|
|
|
Installing and Verifying the Cisco PGW 2200 Softswitch Software |
|
5-15 |
|
|
||||||
|
|
|
Transferring Additional Configuration Files |
5-16 |
|
|
|
|
|
||||
|
|
|
Migration from Release 9.7 to Release 9.8 without Platform Changes |
5-20 |
|
|
|
||||||
|
|
|
Upgrading Lively from Sparc-based Platforms to Opteron-based Platforms |
5-21 |
|
|
|||||||
|
|
|
Before You Start |
5-21 |
|
|
|
|
|
|
|
|
|
|
|
|
Live Upgrade Procedure |
5-22 |
|
|
|
|
|
|
|
||
|
|
|
Falling Back Overview |
5-26 |
|
|
|
|
|
|
|
|
|
|
|
|
Falling Back to the Cisco PGW 2200 Softswitch Software Release 9.7 without Platform Changes 5-26 |
||||||||||
|
|
|
Falling Back to Solaris 8 and Cisco PGW 2200 Softswitch Release 9.5 or 9.6 |
5-27 |
|
||||||||
|
|
|
Falling Back to Solaris 8 If Hard Drives Were Replaced During the Upgrade |
5-27 |
|
||||||||
|
|
|
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide |
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
||||||
|
vi |
|
|
|
|
|
|
|
|
|
|
OL-18083-01 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Contents
|
Falling Back to Solaris 8 on the Second Disk Drive |
5-28 |
|
|
|
|
|
|
|||||
|
Restoring the Original Cisco PGW 2200 Softswitch Software |
5-32 |
|
|
|
|
|
||||||
|
Falling Back to Previous Cisco PGW 2200 Softswitch Software Releases with Platform Changes 5-32 |
||||||||||||
|
Replacing Hard Disks on an Existing Solaris 10 Platform 5-33 |
|
|
|
|
|
|
||||||
|
Backup Procedure |
5-34 |
|
|
|
|
|
|
|
|
|
|
|
|
Hard Disk Replacement Procedure 5-34 |
|
|
|
|
|
|
|
|
||||
|
Loading the Solaris 10 Operating System |
5-35 |
|
|
|
|
|
|
|
||||
|
Loading the Sun Solaris 10 Operating Environment Packages |
5-35 |
|
|
|
|
|
||||||
|
Installing the Cisco PGW 2200 Softswitch |
5-35 |
|
|
|
|
|
|
|
||||
|
Restoring the System |
5-35 |
|
|
|
|
|
|
|
|
|
||
|
Configuring the Local Area Network Switch |
6-1 |
|
|
|
|
|
|
|
||||
|
LAN Switch Overview |
6-1 |
|
|
|
|
|
|
|
|
|
|
|
|
Catalyst 2900 XL Series |
|
6-2 |
|
|
|
|
|
|
|
|
|
|
|
Catalyst 5500 and 5000 Series |
6-2 |
|
|
|
|
|
|
|
|
|
||
|
XECfgParm.dat File Parameters |
A-1 |
|
|
|
|
|
|
|
|
|
||
|
Understanding the XECfgParm.dat File Format |
A-1 |
|
|
|
|
|
|
|
||||
|
Cisco PGW 2200 Softswitch XECfgParm.dat Files |
A-1 |
|
|
|
|
|
|
|||||
|
Facility Names |
|
A-1 |
|
|
|
|
|
|
|
|
|
|
|
Special Parameters |
A-2 |
|
|
|
|
|
|
|
|
|
||
|
Cisco PGW 2200 Softswitch 9.x XECfgParm.dat File Parameter Definitions |
A-2 |
|
|
|
|
|||||||
|
Client/Server and Secure Connectivity Relationships |
B-1 |
|
|
|
|
|
|
|||||
|
Client/Server and Secure Connectivity Relationships |
B-1 |
|
|
|
|
|
|
|||||
|
Secure Connectivity Among Cisco PGW 2200 Softswitch Applications |
B-1 |
|
|
|
|
|||||||
|
Secure Connectivity Between Cisco PGW 2200 Softswitch Application Platforms |
B-2 |
|||||||||||
|
Secure Connectivity Between Cisco BAMS Application Platforms B-2 |
|
|
|
|
|
|||||||
|
Secure Connectivity Between Cisco BAMS and Cisco PGW 2200 Softswitch Application |
||||||||||||
|
Platforms B-3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
HP OpenView Sample SNMP Configuration |
C-1 |
|
|
|
|
|
|
|
||||
|
Configuring the Cisco PGW 2200 Softswitch to Send Alarms to HP OpenView |
C-1 |
|
|
|
|
|||||||
|
Formatting Trap Messages |
C-3 |
|
|
|
|
|
|
|
|
|
||
|
Sample Installation Scripts |
D-1 |
|
|
|
|
|
|
|
|
|
||
|
Sample Output from install.sh |
D-1 |
|
|
|
|
|
|
|
|
|
||
|
Updated Configuration File Sample |
D-11 |
|
|
|
|
|
|
|
|
|||
|
Sample Configured snmpd.cnf File |
D-13 |
|
|
|
|
|
|
|
|
|||
|
Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) |
D-16 |
|||||||||||
|
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide |
|
|
|
|||||||||
|
|||||||||||||
|
OL-18083-01 |
|
|
|
|
|
|
|
|
|
|
vii |
|
|
|
|
|
|
|
|
|
|
|
|
|
Contents
Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) |
D-27 |
Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) |
D-37 |
Sample Uninstall Scripts E-1
Removing a Cisco PGW 2200 Softswitch Software Version: Sample Output for uninstall.sh E-1
Sample LAN Configurations F-1 |
|
|
Sample Configuration for Cisco Catalyst 5500 A |
F-1 |
|
Sample Configuration for Cisco Catalyst 5500 A RSM |
F-7 |
|
Sample Configuration for Cisco Catalyst 5500 B |
F-8 |
|
Sample Configuration for Cisco Catalyst 5500 B RSM |
F-15 |
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
|
viii |
OL-18083-01 |
|
|
|
This preface describes the objectives of this document and explains how to find additional information on related products and services. It contains the following sections:
•Document Objectives, page ix
•Audience, page ix
•Related Documentation, page ix
•Obtaining Documentation and Submitting a Service Request, page x
•Document Change History, page x
This guide describes the steps necessary to install and configure the Sun Solaris 10 operating system, and the Cisco PGW 2200 Softswitch software Release 9.8.
Note This guide does not cover media gateway (MGW) or Cisco PGW 2200 Softswitch hardware installation. For instructions on installing these components, see the Cisco PGW 2200 Softswitch Hardware Installation Guide.
The audience for this document is network operators and administrators. This audience is assumed to have experience in telecommunications networks, protocols, and equipment, and a familiarity with data communications networks, protocols, and equipment.
This document contains information that is related to Cisco PGW 2200 Softswitch software installation and configuration. For additional information on those subjects, see the documents at this URL:
http://www.cisco.com/en/US/products/hw/vcallcon/ps2027/tsd_products_support_series_home.html
You can also find the Cisco PGW 2200 Softswitch Documentation Map at the following URL:
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
|
OL-18083-01 |
ix |
|
Preface
http://www.cisco.com/en/US/products/hw/vcallcon/ps2027/products_documentation_roadmaps_list.ht ml
Other useful reference publications include
•Overviews of the related telephony solutions—Describe the Cisco telephony solutions with which the Cisco PGW 2200 Softswitch node is associated
•Provisioning guides for the related telephony solutions—Describe the provisioning steps for the Cisco telephony solutions with which the Cisco PGW 2200 Softswitch node is associated
•Solution gateway installation and configuration guides—Describe the steps for installing and configuring the media gateway for a particular Cisco telephony solution
•Cisco IP Transfer Point - LinkExtender—Describes the Cisco IP Transfer Point - LinkExtender (Cisco IPT-L, formerly known as the Cisco Signaling Link Terminal or Cisco SLT) and provides configuration information
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation at
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
Release Number |
Document Number |
Change Date |
Change Summary |
|
|
|
|
9.8(1) |
OL-18083-01 |
November 2008 |
Initial release |
|
|
|
|
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
|
x |
OL-18083-01 |
|
|
|
C H A P T E R 1
This chapter provides checklists describing the required and optional components, software media, and information you must have on hand before installing the Sun Solaris operating system and the
Cisco PGW 2200 Softswitch software:
•Cisco PGW 2200 Softswitch Release 9.8 and up, which requires the Sun Solaris Operating System 10
Note The entire installation procedure takes approximately 2 hours to complete.
The following Cisco products are supported by this software:
•Cisco PGW 2200 Softswitch
•Cisco Billing and Measurements Server (BAMS)
•Cisco H.323 Signaling Interface (HSI)
The platforms that are supported for these products are identified in the Cisco PGW 2200 Softswitch Hardware Installation Guide (Release 7 & 9).
Table 1-1 through Table 1-4 list the required and optional tasks, information, and software media for installing the Solaris 10 operating system and the Cisco PGW 2200 Softswitch software Release 9.8 and higher.
Before installing the Sun Solaris operating system, Solaris patches, and alarm card software, ensure that you collect the information and complete tasks listed in the following tables.
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
|
OL-18083-01 |
1-1 |
|
|
|
Chapter 1 Preparing for Sun Solaris Operating System and Cisco PGW 2200 Softswitch Software Installation
Solaris 10, Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Software Release Preinstallation Checklists
Note The target machine must have a terminal connected to the console port by means of a serial cable.
Gather all of the appropriate software media listed in Table 1-1. For more information, see the appropriate Sun documentation that shipped with your system.
Table 1-1 Solaris 10 Required Media Checklist
Media |
Version |
The following CD-ROM disks are ordered from Cisco:
•Cisco Solaris 10 Operating System Jumpstart Disk
This disk installs the Sun Solaris 10 Operating System, configured specifically to support the
Cisco PGW 2200 Softswitch software. There are two versions of this disk, one for each of the supported platform types:
– Cisco Solaris 10 Operating System Jumpstart Disk for |
06/06 |
Sparc-based platforms |
|
– Cisco Solaris 10 Operating System Jumpstart Disk for |
01/06 |
Opteron-based platforms |
|
• Cisco Solaris 10 Operating Environment CD |
3.0(6) |
This disk contains the following packages: |
|
–CSCOh020 (MGC Security package)
–CSCOh021 (Verification Test Suite scripts)
–CSCOh022 (Solaris 10 patches for Sparc-based platforms)
–CSCOh023 (DiskSuite installation scripts)
–CSCOh024 (Log/Spool installation for Sparc-based platforms)
–CSCOh026 (Xterm, ftp, ntp, and alarm software installation for Sparc-based platforms)
–CSCOh032 (Solaris 10 patches for Opteron-based platforms)
–CSCOh036 (Xterm, ftp, and ntp installation for Opteron-based platforms)
Refer to the Cisco PGW 2200 Softswitch Hardware Installation Guide (Release 7 & 9) for the host minimum hardware requirements. Before using the minimum hardware configuration, consult your Cisco representative to determine the hardware that gives you the best performance results based on your network configuration, proposed traffic, and desired processing power.
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
1-2 |
OL-18083-01 |
|
|
Chapter 1 Preparing for Sun Solaris Operating System and Cisco PGW 2200 Softswitch Software Installation
Solaris 10, Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Software Release Preinstallation
Your system site administrator can provide the required site-specific information in Table 1-2. Use the Notes column in this table to record the information. Several steps in the installation procedure in Chapter 2, “Installing the Sun Solaris 10 Operating System” require you to provide this information.
Table 1-2 Site-Specific Information
Required Information |
Notes |
Subnet Mask
(Example: 255.255.255.0)
Default router (Example: 111.11.xxx.1)
DNS server
NTP server IP address
Time zone
(Example: United States (Eastern))
Root password
(Assigned by your system site administrator)
Your system site administrator can provide the information called for in Table 1-3 as it applies to your target Sun Netra machine. Use the Notes column in this table to record the information. Several steps in the installation procedure require you to provide this information.
Table 1-3 Machine-Specific Checklist
Information |
Notes |
Host name of target machine
IP address of target machine
Default router IP address
Additional Ethernet IP address
Subnet address for each additional Ethernet IP address
Netmask address for each additional Ethernet IP address
Before you begin installing the Solaris 10 operating system, perform the tasks listed in Table 1-4.
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
|
OL-18083-01 |
1-3 |
|
|
|
Chapter 1 Preparing for Sun Solaris Operating System and Cisco PGW 2200 Softswitch Software Installation
Solaris 10, Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Software Release Preinstallation Checklists
Table 1-4 |
Tasks Checklist |
Check Tasks
Make sure that the target machine is connected to a terminal by a serial cable inserted into the console port.
Have your company's internal support and Cisco support contact information readily available so you can get help with the installation if needed. If you have questions or need assistance, see the “Obtaining Documentation and Submitting a Service Request” section on page x.
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
1-4 |
OL-18083-01 |
|
|
C H A P T E R 2
This chapter provides instructions for installing the packages that create the Sun Solaris 10 operating system and its operating environment on the Sun Netra and Sun Fire platforms. The following sections contain these instructions.
Note In the following procedures, your responses to prompts sometimes depend on the disk drive size or other particulars of your system. These are pointed out as you follow the procedures.
•Supported Platforms, page 2-1
•Supported Disk Drives, page 2-1
•Before You Start, page 2-2
•Loading the Sun Solaris 10 Operating System, page 2-2
•Loading the Sun Solaris 10 Operating Environment, page 2-72
Note For procedures on migrating to Solaris 10 and Cisco PGW 2200 Softswitch software Release 9.8, see Chapter 5, “Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8.”
This document describes the specific steps necessary for installing the Sun Solaris 10 operating system and the operating environment on the Sun Netra and Sun Fire platforms. Two platform types are used: Sparc-based and Opteron-based. The platforms that are supported for these products are identified in the
Cisco PGW 2200 Softswitch Hardware Installation Guide (Release 7 & 9).
The following disk drives are supported:
•73 GB
•146 GB
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
|
OL-18083-01 |
2-1 |
|
|
|
Chapter 2 Installing the Sun Solaris 10 Operating System
Before You Start
Be sure to read the following cautions, notes, and tips before installing the Sun Solaris 10 operating system and the operating environment.
Note
Note
Note
Note
Note
Tip
The procedures in this chapter require a working knowledge of the system administration procedures for the Sun Solaris (UNIX) operating system.
Be sure to have the required information listed in Chapter 1, “Preparing for Sun Solaris Operating System and Cisco PGW 2200 Softswitch Software Installation,” before you begin the installation process.
Allow at least 2 hours downtime for the installation of the Cisco PGW 2200 Softswitch software environment.
The text in the screens displayed throughout this document might differ slightly from the text displayed on your console. The screen displays are for reference only and should be treated as examples.
Most of the steps in the installation process ask you to press F2 to continue. However, F2 does not apply to all console types. If it does not apply on your system, you should press Esc-2 instead.
During the installation process, monitor system output frequently for error messages and correct any error conditions before continuing with the installation.
This section provides the following instructions for loading the Sun Solaris 10 operating system:
•Devices on Supported Platforms, page 2-3
•Installing the Sun Solaris 10 Operating System for Sparc-based Platforms, page 2-3
•Installing the Sun Solaris 10 Operating System for Opteron-based Platforms, page 2-13
•Configuring Your Host, page 2-50
•Platform-Specific Installation Procedures, page 2-62
•Installing the Sparc-based Solaris 10 Patches Package (CSCOh022), page 2-73
•Installing the Opteron-based Solaris 10 Patches Package (CSCOh032), page 2-75
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
2-2 |
OL-18083-01 |
|
|
Chapter 2 Installing the Sun Solaris 10 Operating System
Loading the Sun Solaris 10 Operating System
•Installing the Solstice DiskSuite (CSCOh023), page 2-77
•Installing the Log and Spool File Systems (CSCOh024), page 2-89
•Installing Cisco BAMS Archive Partition (CSCOh027), page 2-98
•Installing the Sparc-based Communications and Alarm Software Package (CSCOh026), page 2-103
•Installing the Opteron-based Communications Software Package (CSCOh036), page 2-118
•Installing the Verification Test Suite Script Package (CSCOh021), page 2-129
Table 2-1 shows the Ethernet and disk drive device names for each platform type. This table is referenced throughout this chapter.
Table 2-1 Device Names on Supported Host Platforms
|
Ethernet Interfaces |
|
|
Disk Drives |
|
|
|
|
Platform Type |
|
|
|
|
|
|
|
|
First |
Second |
Third |
Fourth |
First |
Second |
Third |
Fourth |
|
|
|
|
|
|
|
|
|
|
Sun Fire V210 / |
bge0 |
bge1 |
bge2 |
bge3 |
c1t0d0 |
c1t1d0 |
— |
— |
Netra 210 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Netra 240 |
bge0 |
bge1 |
bge21 |
bge31 |
c1t0d0 |
c1t1d0 |
— |
— |
Sun Fire V40z |
bge0 |
bge1 |
ce0 |
|
c1t0d0 |
c1t1d0 |
— |
— |
|
|
|
|
|
|
|
|
|
Sun Fire X4600 |
e1000g0 |
e1000g1 |
e1000g2 |
e1000g3 |
c3t0d0 |
c3t1d0 |
— |
— |
|
|
|
|
|
|
|
|
|
Sun Fire X4600 |
e1000g0 |
e1000g1 |
e1000g2 |
e1000g3 |
c3t0d0 |
c3t1d0 |
— |
— |
M2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Netra 440 |
ce0 |
ce1 |
— |
— |
c1t0d0 |
c1t1d0 |
c1t2d01 |
c1t3d01 |
Netra X4200 M2 |
nge0 |
nge1 |
e1000g0 |
e1000g1 |
c3t0d0 |
c3t1d0 |
— |
— |
|
|
|
|
|
|
|
|
|
1. This device is not used currently.
Note If your platform has multiple disk drives, install the Solaris 10 Operating System on the first disk drive only.
The instructions in this section were written to correspond with the instructions in the Cisco Solaris 10 Operating System Jumpstart Disk for Sparc-based Platforms. Other Solaris installations are similar, with slight variations. These instructions will note the differences between the sets of installation instructions.
Step 1 Choose one of the following options to connect the Cisco PGW 2200 Softswitch:
•Connect to the Cisco PGW 2200 Softswitch through a console port.
•Connect a keyboard and monitor to the Cisco PGW 2200 Softswitch.
Step 2 This step is optional—if you decide to skip this step, go to Step 3.
a. Place the system in single-user mode by shutting down the standby machine.
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
|
OL-18083-01 |
2-3 |
|
|
|
Chapter 2 Installing the Sun Solaris 10 Operating System
Loading the Sun Solaris 10 Operating System
b.When the machine prompts for a password, type either ^ -d to proceed with normal startup, or the root password for system maintenance.
Step 3 Load the appropriate version of the CD-ROM labeled Cisco Solaris 10 Operating System Jumpstart Disk for Sparc-based Platforms into the CD-ROM drive.
Step 4 If the system is currently running, log in as root.
Step 5 Bring the system to the ok prompt by entering the following command:
# init 0
Note If you are prompted to select a language before booting from the CD, go to the ok prompt by sending a break on the console port. On Sun Sparc-based platforms, the key sequence <cr>#. gets you to the system controller prompt.
From the system controller prompt, use the break -y command to break out of the operating system and console -f command to return to the console display. You should see the ok prompt.
Step 6 Boot the system from the CD-ROM drive by entering the appropriate command:
ok boot cdrom - install
Information similar to the following is displayed:
ok boot cdrom - install
SC Alert: Host System has Reset
Probing system devices
Probing memory
Probing I/O buses
Sun Fire V210, No Keyboard
Copyright 2005 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.18.5, |
2048 MB memory installed, Serial #52030991. |
|
Ethernet address |
0:3:ba:19:ee:f, Host ID: 8319ee0f. |
|
Initializing |
1MB of memory at addr |
103feec000 |
Initializing |
1MB of memory at addr |
103fee0000 |
Initializing |
1MB of memory at addr |
103f002000 |
Initializing |
1MB of memory at addr |
103e002000 |
Initializing |
1MB of memory at addr |
1000000000 |
Initializing |
1MB of memory at addr |
0 |
Rebooting with command: boot cdrom - install
Boot device: /pci@1e,600000/ide@d/cdrom@0,0:f File and args: - install
|
|
|
SunOS Release 5.10 Version Generic_118833-17 64-bit |
|
|
|
|
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved. |
|
|
|
|
Use is subject to license terms. |
|
|
|
|
Hardware watchdog enabled |
|
|
|
|
Configuring devices. |
|
|
|
|
Using RPC Bootparams for network configuration information. |
|
|
|
|
Attempting to configure interface bge3... |
|
|
|
|
Skipped interface bge3 |
|
|
|
|
Attempting to configure interface bge2... |
|
|
|
|
Skipped interface bge2 |
|
|
|
|
Attempting to configure interface bge1... |
|
|
|
|
Skipped interface bge1 |
|
|
|
|
Attempting to configure interface bge0... |
|
|
|
|
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide |
|
|
|
|
||
|
2-4 |
|
OL-18083-01 |
|
|
|
|
Chapter 2 Installing the Sun Solaris 10 Operating System
Loading the Sun Solaris 10 Operating System
Skipped interface bge0
Beginning system identification...
Searching for configuration file(s)...
Search complete.
Discovering additional network configuration...
Completing system identification...
Starting remote procedure call (RPC) services: done.
System identification complete.
Starting Solaris installation program...
Searching for JumpStart directory...
<<< using cdrom install_config >>>
Checking rules.ok file...
Using profile: any_machine
Using finish script: any_finish
Executing JumpStart preinstall phase...
Searching for SolStart directory...
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.
Processing profile
-Selecting cluster (SUNWCrnet)
-Selecting package (SUNWadmc)
-Selecting package (SUNWadmfw)
-Selecting package (SUNWcpc)
-Selecting package (SUNWcpcu)
-Selecting package (SUNWcstl)
-Selecting package (SUNWless)
-Selecting package (SUNWlur)
-Selecting package (SUNWluu)
-Selecting package (SUNWmkcd)
-Selecting package (SUNWmipu)
-Selecting package (SUNWmipr)
-Selecting package (SUNWocf)
-Selecting package (SUNWocfr)
-Selecting package (SUNWspnego)
-Selecting package (SUNWter)
-Selecting package (SUNWtnfc)
-Selecting package (SUNWucbt)
-Selecting package (SUNWvld)
-Selecting package (SUNWvldu)
-Selecting package (SUNWzsh)
-Selecting package (SUNWsacom)
-Selecting package (SUNWroute)
-Selecting package (SUNWxwfnt)
-Selecting package (SUNWxwdv)
-Selecting package (SUNWctpls)
-Selecting package (SUNWgssdh)
-Selecting package (SUNWm64cf)
-Selecting package (SUNWj5rt)
-Selecting package (SUNWxwplt)
-Selecting package (SUNWxwplr)
-Selecting package (SUNWdtcor)
-Selecting package (SUNWxwice)
-Selecting package (SUNWxwrtl)
-Selecting package (SUNWlibC)
-Selecting package (SUNWmfrun)
-Selecting package (SUNWi15rf)
-Selecting package (SUNWmdu)
-Selecting package (SUNWadmfr)
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
|
OL-18083-01 |
2-5 |
|
|
|
Chapter 2 Installing the Sun Solaris 10 Operating System
Loading the Sun Solaris 10 Operating System
-Selecting package (SUNWrsg)
-Selecting package (SUNWsadmi)
-Selecting package (SUNWsasnm)
-Selecting package (SUNWmibii)
-Selecting package (SUNWxi18n)
-Selecting package (SUNWtoo)
-Selecting package (SUNWsprot)
-Selecting package (SUNWbip)
-Selecting package (SUNWbind)
-Selecting package (SUNWbindr)
-Selecting package (SUNWgzip)
-Selecting package (SUNWzip)
-Selecting package (SUNWbash)
-Selecting package (SUNWtcsh)
-Selecting package (SUNWgss)
-Selecting package (SUNWgssc)
-Selecting package (SUNWgssk)
-Selecting package (SUNWqos)
-Selecting package (SUNWqosu)
-Selecting package (SUNWmdb)
-Selecting package (SUNWmdbr)
-Selecting package (SUNWmdbdm)
-Selecting package (SUNWnfsckr)
-Selecting package (SUNWnfscr)
-Selecting package (SUNWnfscu)
-Selecting package (SUNWifp)
-Selecting package (SUNWged)
-Selecting package (SUNW1394)
-Selecting package (SUNWqfed)
-Selecting package (SUNWaccr)
-Selecting package (SUNWaccu)
-Selecting package (SUNWus)
-Selecting package (SUNWrsgk)
-Selecting package (SUNWzebrar)
-Selecting package (SUNWzebrau)
-Selecting package (SUNWeurf)
-Selecting package (SUNWgcmn)
-Selecting package (SUNWeuodf)
-Selecting package (SUNWxwacx)
-Selecting package (SUNWpoolr)
-Selecting package (SUNWpool)
-Selecting package (SUNWluzone)
-Selecting package (SUNWzoner)
-Selecting package (SUNWzoneu)
-Selecting package (SUNWbtool)
-Selecting package (SUNWdtrc)
-Selecting package (SUNWdtrp)
-Selecting package (SUNWfss)
-Selecting package (SUNWinst)
-Selecting package (SUNWipc)
-Selecting package (SUNWqus)
-Selecting package (SUNWqusu)
-Selecting package (SUNWrcmdc)
-Selecting package (SUNWdtdmr)
-Selecting package (SUNWtltk)
-Selecting package (SUNWtnetc)
-Selecting package (SUNWtnfd)
-Selecting package (SUNWtnetd)
-Selecting package (SUNWtnetr)
-Selecting package (SUNWsshcu)
-Selecting package (SUNWsshdr)
-Selecting package (SUNWsshdu)
-Selecting package (SUNWsshr)
-Selecting package (SUNWsshu)
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide
2-6 |
OL-18083-01 |
|
|
Chapter 2 Installing the Sun Solaris 10 Operating System
Loading the Sun Solaris 10 Operating System
-Selecting package (SUNWpd)
-Selecting package (SUNWced)
-Selecting package (SUNWcart200)
-Selecting package (SUNWkvmt200)
-Selecting package (SUNWust1)
-Selecting package (SUNWatfsr)
-Selecting package (SUNWatfsu)
-Selecting package (SUNWrcmdr)
-Selecting package (SUNWrcmds)
-Selecting package (SUNWxcu4)
-Selecting package (SUNWefc)
-Selecting package (SUNWglmr)
-Selecting package (SUNWi2cr)
-Selecting package (SUNWpstl)
-Selecting package (SUNWbart)
-Selecting package (SUNWpiclu)
-Selecting package (SUNWpiclr)
-Selecting package (SUNWopensslr)
-Selecting package (SUNWopenssl-commands)
-Selecting all disks
-Configuring boot device
-Using disk (c1t0d0) for "rootdisk"
-Configuring / (c1t0d0s0)
-Configuring /var (c1t0d0s1)
-Configuring swap (c1t0d0s3)
- |
Configuring |
(c1t0d0s4) |
- |
Configuring |
(c1t0d0s6) |
-Configuring /opt (c1t0d0s5)
-Deselecting unmodified disk (c1t1d0)
Verifying disk configuration
- WARNING: Changing the system's default boot device in the EEPROM
Verifying space allocation
- Total software size: 376.86 Mbytes
Preparing system for Solaris install
Configuring disk (c1t0d0)
- Creating Solaris disk label (VTOC)
Creating and checking UFS file systems
-Creating / (c1t0d0s0)
-Creating /var (c1t0d0s1)
-Creating /opt (c1t0d0s5)
Beginning Solaris software installation
|
Starting software installation |
|
|
|
|
|
|
|
|
SUNWcsu.......................... |
done. |
363.07 |
Mbytes remaining. |
||||
|
SUNWcsr.......................... |
done. |
359.22 |
Mbytes remaining. |
||||
|
SUNWcsl.......................... |
done. |
347.35 |
Mbytes remaining. |
||||
|
SUNWcnetr........................ |
done. |
347.23 |
Mbytes remaining. |
||||
|
SUNWckr.......................... |
done. |
337.09 |
Mbytes remaining. |
||||
|
SUNWkvm.u........................ |
done. |
335.16 |
Mbytes remaining. |
||||
|
SUNWcar.u........................ |
done. |
334.65 |
Mbytes remaining. |
||||
|
SUNWcakr.u....................... |
done. |
315.55 |
Mbytes remaining. |
||||
|
SUNWxwice........................ |
done. |
315.27 |
Mbytes remaining. |
||||
|
SUNWcsd.......................... |
done. |
315.01 |
Mbytes remaining. |
||||
|
SUNWxwrtl........................ |
done. |
314.87 |
Mbytes remaining. |
||||
|
SUNWzlib......................... |
done. |
314.62 |
Mbytes remaining. |
||||
|
SUNWbzip......................... |
done. |
314.36 |
Mbytes remaining. |
||||
|
SUNWlibmsr....................... |
done. |
311.13 |
Mbytes remaining. |
||||
|
|
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide |
|
|
||||
|
|
|
||||||
|
OL-18083-01 |
|
|
|
|
2-7 |
|
|
|
|
|
|
|
|
Chapter 2 Installing the Sun Solaris 10 Operating System
|
|
Loading the Sun Solaris 10 Operating System |
|
|
|
|
||
|
|
|
|
........................SUNWlibms |
done. |
311.09 |
Mbytes remaining. |
|
|
|
|
|
SUNWxwfnt........................ |
done. |
299.39 |
Mbytes remaining. |
|
|
|
|
|
SUNWxwdv......................... |
done. |
299.34 |
Mbytes remaining. |
|
|
|
|
|
SUNWxwplr........................ |
done. |
299.28 |
Mbytes remaining. |
|
|
|
|
|
SUNWperl584core.................. |
done. |
293.83 |
Mbytes remaining. |
|
|
|
|
|
SUNWperl584usr................... |
done. |
272.69 |
Mbytes remaining. |
|
|
|
|
|
SUNWesu.......................... |
done. |
270.73 |
Mbytes remaining. |
|
|
|
|
|
SUNWcpp.......................... |
done. |
270.63 |
Mbytes remaining. |
|
|
|
|
|
SUNWdtcor........................ |
done. |
270.60 |
Mbytes remaining. |
|
|
|
|
|
SUNWxwplt........................ |
done. |
249.87 |
Mbytes remaining. |
|
|
|
|
|
SUNWlibC......................... |
done. |
244.13 |
Mbytes remaining. |
|
|
|
|
|
SUNWctpls........................ |
done. |
244.05 |
Mbytes remaining. |
|
|
|
|
|
SUNWmfrun........................ |
done. |
234.11 |
Mbytes remaining. |
|
|
|
|
|
SUNWtcsh......................... |
done. |
233.72 |
Mbytes remaining. |
|
|
|
|
|
SUNWtecla........................ |
done. |
233.09 |
Mbytes remaining. |
|
|
|
|
|
SUNWter.......................... |
done. |
231.47 |
Mbytes remaining. |
|
|
|
|
|
SUNWgcmn......................... |
done. |
231.44 |
Mbytes remaining. |
|
|
|
|
|
SUNWpr........................... |
done. |
230.35 |
Mbytes remaining. |
|
|
|
|
|
SUNWtls.......................... |
done. |
222.76 |
Mbytes remaining. |
|
|
|
|
|
SUNWdtdmr........................ |
done. |
222.73 |
Mbytes remaining. |
|
|
|
|
|
SUNWtltk......................... |
done. |
219.66 |
Mbytes remaining. |
|
|
|
|
|
SUNWkrbr......................... |
done. |
219.58 |
Mbytes remaining. |
|
|
|
|
|
SUNWkrbu......................... |
done. |
217.09 |
Mbytes remaining. |
|
|
|
|
|
SUNWtnetc........................ |
done. |
216.92 |
Mbytes remaining. |
|
|
|
|
|
SUNWtnetd........................ |
done. |
216.84 |
Mbytes remaining. |
|
|
|
|
|
SUNWtnetr........................ |
done. |
216.79 |
Mbytes remaining. |
|
|
|
|
|
SUNWtnfc......................... |
done. |
216.29 |
Mbytes remaining. |
|
|
|
|
|
SUNWtnfd......................... |
done. |
216.20 |
Mbytes remaining. |
|
|
|
|
|
SUNWtoo.......................... |
done. |
215.12 |
Mbytes remaining. |
|
|
|
|
|
SUNWucbt......................... |
done. |
215.09 |
Mbytes remaining. |
|
|
|
|
|
SUNWudaplr....................... |
done. |
215.06 |
Mbytes remaining. |
|
|
|
|
|
SUNWudaplu....................... |
done. |
214.81 |
Mbytes remaining. |
|
|
|
|
|
SUNWib........................... |
done. |
213.14 |
Mbytes remaining. |
|
|
|
|
|
SUNWipoib........................ |
done. |
213.00 |
Mbytes remaining. |
|
|
|
|
|
SUNWtavor........................ |
done. |
212.20 |
Mbytes remaining. |
|
|
|
|
|
SUNWudapltu...................... |
done. |
211.75 |
Mbytes remaining. |
|
|
|
|
|
SUNWudapltr...................... |
done. |
211.50 |
Mbytes remaining. |
|
|
|
|
|
SUNWaudd......................... |
done. |
210.84 |
Mbytes remaining. |
|
|
|
|
|
SUNWusb.......................... |
done. |
209.47 |
Mbytes remaining. |
|
|
|
|
|
SUNWusbs......................... |
done. |
209.39 |
Mbytes remaining. |
|
|
|
|
|
SUNWuedg......................... |
done. |
209.21 |
Mbytes remaining. |
|
|
|
|
|
SUNWugen......................... |
done. |
209.15 |
Mbytes remaining. |
|
|
|
|
|
SUNWuksp......................... |
done. |
209.07 |
Mbytes remaining. |
|
|
|
|
|
SUNWopenssl-libraries............ |
done. |
202.10 |
Mbytes remaining. |
|
|
|
|
|
SUNWwbsup........................ |
done. |
201.74 |
Mbytes remaining. |
|
|
|
|
|
SUNWinstall-patch-utils-root..... |
done. |
201.71 |
Mbytes remaining. |
|
|
|
|
|
SUNWswmt......................... |
done. |
201.00 |
Mbytes remaining. |
|
|
|
|
|
SUNWuprl......................... |
done. |
200.94 |
Mbytes remaining. |
|
|
|
|
|
SUNWj5rt......................... |
done. |
118.41 |
Mbytes remaining. |
|
|
|
|
|
SUNWocfr......................... |
done. |
118.34 |
Mbytes remaining. |
|
|
|
|
|
SUNWocf.......................... |
done. |
117.76 |
Mbytes remaining. |
|
|
|
|
|
SUNWxi18n........................ |
done. |
116.78 |
Mbytes remaining. |
|
|
|
|
|
SUNWvld.......................... |
done. |
116.73 |
Mbytes remaining. |
|
|
|
|
|
SUNWvldu......................... |
done. |
116.68 |
Mbytes remaining. |
|
|
|
|
|
SUNWnfscr........................ |
done. |
116.53 |
Mbytes remaining. |
|
|
|
|
|
SUNWnfsckr....................... |
done. |
115.12 |
Mbytes remaining. |
|
|
|
|
|
SUNWnfscu........................ |
done. |
114.83 |
Mbytes remaining. |
|
|
|
|
|
SUNWgzip......................... |
done. |
114.73 |
Mbytes remaining. |
|
|
|
|
|
SUNWgssc......................... |
done. |
114.68 |
Mbytes remaining. |
|
|
|
|
|
SUNWgss.......................... |
done. |
114.31 |
Mbytes remaining. |
|
|
|
|
|
SUNWbip.......................... |
done. |
114.12 |
Mbytes remaining. |
|
|
|
|
|
SUNWrcmdc........................ |
done. |
113.25 |
Mbytes remaining. |
|
|
|
|
|
SUNWrcmds........................ |
done. |
112.95 |
Mbytes remaining. |
|
|
|
|
|
SUNWproduct-registry-root........ |
done. |
112.93 |
Mbytes remaining. |
|
|
|
|
|
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide |
||||
|
|
|
|
|||||
|
2-8 |
|
|
|
|
OL-18083-01 |
|
|
|
|
|
|
|
|
Chapter 2 Installing the Sun Solaris 10 Operating System
|
|
|
|
Loading the Sun Solaris 10 Operating System |
|
||||
|
SUNWwsr2......................... |
done. |
112.59 |
Mbytes remaining. |
|||||
|
SUNWlxml......................... |
done. |
109.19 |
Mbytes remaining. |
|||||
|
SUNWlexpt........................ |
done. |
108.61 |
Mbytes remaining. |
|||||
|
SUNWxge.......................... |
done. |
108.08 |
Mbytes remaining. |
|||||
|
SUNWxcu4......................... |
done. |
106.87 |
Mbytes remaining. |
|||||
|
SUNWxwacx........................ |
done. |
106.69 |
Mbytes remaining. |
|||||
|
SUNWsprot........................ |
done. |
105.21 |
Mbytes remaining. |
|||||
|
SUNWzfskr........................ |
done. |
104.39 |
Mbytes remaining. |
|||||
|
SUNWzfsr......................... |
done. |
103.43 |
Mbytes remaining. |
|||||
|
SUNWsmapi........................ |
done. |
102.80 |
Mbytes remaining. |
|||||
|
SUNWzfsu......................... |
done. |
101.29 |
Mbytes remaining. |
|||||
|
SUNWrsg.......................... |
done. |
101.16 |
Mbytes remaining. |
|||||
|
SUNWgssdh........................ |
done. |
100.84 |
Mbytes remaining. |
|||||
|
SUNWgssk......................... |
done. |
100.60 |
Mbytes remaining. |
|||||
|
SUNWeurf......................... |
done. |
96.30 |
Mbytes remaining. |
|||||
|
SUNWi15rf........................ |
done. |
96.16 |
Mbytes remaining. |
|||||
|
SUNWnisr......................... |
done. |
96.02 |
Mbytes remaining. |
|||||
|
SUNWnisu......................... |
done. |
93.70 |
Mbytes remaining. |
|||||
|
SUNWzebrar....................... |
done. |
93.63 |
Mbytes remaining. |
|||||
|
SUNWzebrau....................... |
done. |
91.44 |
Mbytes remaining. |
|||||
|
SUNWcpcu......................... |
done. |
90.90 |
Mbytes remaining. |
|||||
|
SUNWfmdr......................... |
done. |
90.84 |
Mbytes remaining. |
|||||
|
SUNWfmd.......................... |
done. |
86.92 |
Mbytes remaining. |
|||||
|
SUNWcslr......................... |
done. |
72.42 |
Mbytes remaining. |
|||||
|
SUNWidnl......................... |
done. |
71.86 |
Mbytes remaining. |
|||||
|
SUNWmdb.......................... |
done. |
66.94 |
Mbytes remaining. |
|||||
|
SUNWzip.......................... |
done. |
66.75 |
Mbytes remaining. |
|||||
|
SUNWmdbr......................... |
done. |
63.97 |
Mbytes remaining. |
|||||
|
SUNWpiclu........................ |
done. |
60.17 |
Mbytes remaining. |
|||||
|
SUNWzoner........................ |
done. |
60.11 |
Mbytes remaining. |
|||||
|
SUNWmdr.......................... |
done. |
57.74 |
Mbytes remaining. |
|||||
|
SUNWmdu.......................... |
done. |
57.04 |
Mbytes remaining. |
|||||
|
SUNWadmc......................... |
done. |
55.16 |
Mbytes remaining. |
|||||
|
SUNWadmfr........................ |
done. |
55.14 |
Mbytes remaining. |
|||||
|
SUNWadmfw........................ |
done. |
54.43 |
Mbytes remaining. |
|||||
|
SUNWadmlib-sysid................. |
done. |
54.17 |
Mbytes remaining. |
|||||
|
SUNWadmr......................... |
done. |
54.09 |
Mbytes remaining. |
|||||
|
SUNWadmap........................ |
done. |
53.21 |
Mbytes remaining. |
|||||
|
SUNWlur.......................... |
done. |
51.67 |
Mbytes remaining. |
|||||
|
SUNWluu.......................... |
done. |
50.48 |
Mbytes remaining. |
|||||
|
SUNWluzone....................... |
done. |
50.11 |
Mbytes remaining. |
|||||
|
SUNWpoolr........................ |
done. |
50.08 |
Mbytes remaining. |
|||||
|
SUNWpool......................... |
done. |
49.24 |
Mbytes remaining. |
|||||
|
SUNWzoneu........................ |
done. |
48.61 |
Mbytes remaining. |
|||||
|
SUNWluxop........................ |
done. |
47.86 |
Mbytes remaining. |
|||||
|
SUNWses.......................... |
done. |
47.76 |
Mbytes remaining. |
|||||
|
SUNWssad......................... |
done. |
47.45 |
Mbytes remaining. |
|||||
|
SUNWifp.......................... |
done. |
47.17 |
Mbytes remaining. |
|||||
|
SUNWzsh.......................... |
done. |
44.04 |
Mbytes remaining. |
|||||
|
SUNW1394......................... |
done. |
43.27 |
Mbytes remaining. |
|||||
|
SUNWinst......................... |
done. |
42.77 |
Mbytes remaining. |
|||||
|
SUNWintgige...................... |
done. |
42.51 |
Mbytes remaining. |
|||||
|
SUNWipc.......................... |
done. |
42.45 |
Mbytes remaining. |
|||||
|
SUNWipfr......................... |
done. |
42.31 |
Mbytes remaining. |
|||||
|
SUNWipfu......................... |
done. |
41.04 |
Mbytes remaining. |
|||||
|
SUNWipged........................ |
done. |
40.54 |
Mbytes remaining. |
|||||
|
SUNWced.u........................ |
done. |
39.90 |
Mbytes remaining. |
|||||
|
SUNWcpc.u........................ |
done. |
39.84 |
Mbytes remaining. |
|||||
|
SUNWbash......................... |
done. |
39.11 |
Mbytes remaining. |
|||||
|
SUNWaccr......................... |
done. |
39.01 |
Mbytes remaining. |
|||||
|
SUNWaccu......................... |
done. |
38.64 |
Mbytes remaining. |
|||||
|
SUNWefc.u........................ |
done. |
38.36 |
Mbytes remaining. |
|||||
|
SUNWiscsir....................... |
done. |
37.68 |
Mbytes remaining. |
|||||
|
SUNWiscsiu....................... |
done. |
37.12 |
Mbytes remaining. |
|||||
|
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide |
|
|
|
|||||
|
|||||||||
|
OL-18083-01 |
|
|
|
|
2-9 |
|
|
|
|
|
|
|
|
|
Chapter 2 Installing the Sun Solaris 10 Operating System
|
|
Loading the Sun Solaris 10 Operating System |
|
|
|
|
||
|
|
|
|
.......................SUNWglmr.u |
done. |
37.04 |
Mbytes remaining. |
|
|
|
|
|
SUNWi2cr.u....................... |
done. |
36.85 |
Mbytes remaining. |
|
|
|
|
|
SUNWloc.......................... |
done. |
36.34 |
Mbytes remaining. |
|
|
|
|
|
SUNWpstl.u....................... |
done. |
36.21 |
Mbytes remaining. |
|
|
|
|
|
SUNWus.u......................... |
done. |
36.16 |
Mbytes remaining. |
|
|
|
|
|
SUNWbtool........................ |
done. |
34.83 |
Mbytes remaining. |
|
|
|
|
|
SUNWjfca......................... |
done. |
33.98 |
Mbytes remaining. |
|
|
|
|
|
SUNWjfcau........................ |
done. |
33.90 |
Mbytes remaining. |
|
|
|
|
|
SUNWjss.......................... |
done. |
29.54 |
Mbytes remaining. |
|
|
|
|
|
SUNWkey.......................... |
done. |
29.16 |
Mbytes remaining. |
|
|
|
|
|
SUNWatfsr........................ |
done. |
29.09 |
Mbytes remaining. |
|
|
|
|
|
SUNWatfsu........................ |
done. |
28.81 |
Mbytes remaining. |
|
|
|
|
|
SUNWbart......................... |
done. |
28.76 |
Mbytes remaining. |
|
|
|
|
|
SUNWbindr........................ |
done. |
28.71 |
Mbytes remaining. |
|
|
|
|
|
SUNWbind......................... |
done. |
25.60 |
Mbytes remaining. |
|
|
|
|
|
SUNWless......................... |
done. |
25.44 |
Mbytes remaining. |
|
|
|
|
|
SUNWcfcl......................... |
done. |
25.30 |
Mbytes remaining. |
|
|
|
|
|
SUNWcfclr........................ |
done. |
25.28 |
Mbytes remaining. |
|
|
|
|
|
SUNWcfpl......................... |
done. |
24.92 |
Mbytes remaining. |
|
|
|
|
|
SUNWcfplr........................ |
done. |
24.87 |
Mbytes remaining. |
|
|
|
|
|
SUNWlibsasl...................... |
done. |
24.28 |
Mbytes remaining. |
|
|
|
|
|
SUNWchxge........................ |
done. |
24.04 |
Mbytes remaining. |
|
|
|
|
|
SUNWlldap........................ |
done. |
23.84 |
Mbytes remaining. |
|
|
|
|
|
SUNWluxopr....................... |
done. |
23.17 |
Mbytes remaining. |
|
|
|
|
|
SUNWm64cf........................ |
done. |
23.11 |
Mbytes remaining. |
|
|
|
|
|
SUNWcstl......................... |
done. |
22.96 |
Mbytes remaining. |
|
|
|
|
|
SUNWmdbdm........................ |
done. |
22.90 |
Mbytes remaining. |
|
|
|
|
|
SUNWmibii........................ |
done. |
22.78 |
Mbytes remaining. |
|
|
|
|
|
SUNWsasnm........................ |
done. |
21.91 |
Mbytes remaining. |
|
|
|
|
|
SUNWsadmi........................ |
done. |
20.91 |
Mbytes remaining. |
|
|
|
|
|
SUNWsacom........................ |
done. |
20.61 |
Mbytes remaining. |
|
|
|
|
|
SUNWmipr......................... |
done. |
20.53 |
Mbytes remaining. |
|
|
|
|
|
SUNWmipu......................... |
done. |
20.25 |
Mbytes remaining. |
|
|
|
|
|
SUNWmkcd......................... |
done. |
18.95 |
Mbytes remaining. |
|
|
|
|
|
SUNWdtrc......................... |
done. |
16.86 |
Mbytes remaining. |
|
|
|
|
|
SUNWdtrp......................... |
done. |
16.41 |
Mbytes remaining. |
|
|
|
|
|
SUNWfctl......................... |
done. |
15.97 |
Mbytes remaining. |
|
|
|
|
|
SUNWemlxs........................ |
done. |
13.19 |
Mbytes remaining. |
|
|
|
|
|
SUNWemlxu........................ |
done. |
12.50 |
Mbytes remaining. |
|
|
|
|
|
SUNWerid......................... |
done. |
12.35 |
Mbytes remaining. |
|
|
|
|
|
SUNWeuodf........................ |
done. |
12.23 |
Mbytes remaining. |
|
|
|
|
|
SUNWfchbar....................... |
done. |
12.20 |
Mbytes remaining. |
|
|
|
|
|
SUNWfchba........................ |
done. |
10.63 |
Mbytes remaining. |
|
|
|
|
|
SUNWfcip......................... |
done. |
10.44 |
Mbytes remaining. |
|
|
|
|
|
SUNWfcmdb........................ |
done. |
10.24 |
Mbytes remaining. |
|
|
|
|
|
SUNWfcp.......................... |
done. |
9.95 |
Mbytes remaining. |
|
|
|
|
|
SUNWfcprt........................ |
done. |
9.88 |
Mbytes remaining. |
|
|
|
|
|
SUNWfcsm......................... |
done. |
9.73 |
Mbytes remaining. |
|
|
|
|
|
SUNWopenssl-commands............. |
done. |
9.35 |
Mbytes remaining. |
|
|
|
|
|
SUNWopensslr..................... |
done. |
9.30 |
Mbytes remaining. |
|
|
|
|
|
SUNWpd........................... |
done. |
8.64 |
Mbytes remaining. |
|
|
|
|
|
SUNWfss.......................... |
done. |
8.53 |
Mbytes remaining. |
|
|
|
|
|
SUNWpiclr........................ |
done. |
8.50 |
Mbytes remaining. |
|
|
|
|
|
SUNWpkgcmdsr..................... |
done. |
8.46 |
Mbytes remaining. |
|
|
|
|
|
SUNWpkgcmdsu..................... |
done. |
5.72 |
Mbytes remaining. |
|
|
|
|
|
SUNWged.......................... |
done. |
5.47 |
Mbytes remaining. |
|
|
|
|
|
SUNWqfed......................... |
done. |
5.25 |
Mbytes remaining. |
|
|
|
|
|
SUNWqlc.......................... |
done. |
4.05 |
Mbytes remaining. |
|
|
|
|
|
SUNWqlcu......................... |
done. |
4.00 |
Mbytes remaining. |
|
|
|
|
|
SUNWqos.......................... |
done. |
3.83 |
Mbytes remaining. |
|
|
|
|
|
SUNWqosu......................... |
done. |
3.71 |
Mbytes remaining. |
|
|
|
|
|
SUNWqus.......................... |
done. |
3.48 |
Mbytes remaining. |
|
|
|
|
|
SUNWqusu......................... |
done. |
3.45 |
Mbytes remaining. |
|
|
|
|
|
SUNWrcmdr........................ |
done. |
3.37 |
Mbytes remaining. |
|
|
|
|
|
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide |
||||
|
|
|
|
|||||
|
2-10 |
|
|
|
|
OL-18083-01 |
|
|
|
|
|
|
|
|
Chapter 2 Installing the Sun Solaris 10 Operating System
Loading the Sun Solaris 10 Operating System
SUNWrge.......................... |
done. |
3.26 |
Mbytes remaining. |
SUNWroute........................ |
done. |
2.94 |
Mbytes remaining. |
SUNWrpcib........................ |
done. |
2.79 |
Mbytes remaining. |
SUNWrsgk......................... |
done. |
2.72 |
Mbytes remaining. |
SUNWsolnm........................ |
done. |
2.70 |
Mbytes remaining. |
SUNWsshcu........................ |
done. |
2.27 |
Mbytes remaining. |
SUNWsshdr........................ |
done. |
2.20 |
Mbytes remaining. |
SUNWsshdu........................ |
done. |
1.79 |
Mbytes remaining. |
SUNWspnego....................... |
done. |
1.68 |
Mbytes remaining. |
SUNWsshr......................... |
done. |
1.57 |
Mbytes remaining. |
SUNWsshu......................... |
done. |
1.00 |
Mbytes remaining. |
Completed software installation
Solaris 10 software installation succeeded
Customizing system files
-Mount points table (/etc/vfstab)
-Unselected disk mount points (/var/sadm/system/data/vfstab.unselected)
-Network host addresses (/etc/hosts)
-Network host addresses (/etc/hosts)
-Environment variables (/etc/default/init)
Cleaning devices
Customizing system devices
-Physical devices (/devices)
-Logical devices (/dev)
Installing boot information
-Installing boot blocks (c1t0d0s0)
-Updating system firmware for automatic rebooting
Installation log location
-/a/var/sadm/system/logs/install_log (before reboot)
-/var/sadm/system/logs/install_log (after reboot)
Installation complete
Executing SolStart postinstall phase...
Executing finish script "patch_finish"...
Finish script patch_finish execution completed.
Executing JumpStart postinstall phase...
Executing finish script "any_finish"...
any_finish started with SI_CONFIG_DIR = /tmp/install_config any_finish completed
Finish script any_finish execution completed.
The begin script log 'begin.log'
is located in /var/sadm/system/logs after reboot.
The finish script log 'finish.log'
is located in /var/sadm/system/logs after reboot.
syncing file systems... done
rebooting...
SC Alert: Host System has Reset
Probing system devices
Probing memory
Probing I/O buses
|
|
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide |
|
|
||
|
|
|
||||
|
OL-18083-01 |
|
|
2-11 |
|
|
|
|
|
|
Chapter 2 Installing the Sun Solaris 10 Operating System
Loading the Sun Solaris 10 Operating System
Sun Fire V210, No Keyboard
Copyright 2005 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.18.5, 2048 MB memory installed, Serial #52030991.
Ethernet address 0:3:ba:19:ee:f, Host ID: 8319ee0f.
Initializing |
1MB of memory at addr |
103feec000 |
Initializing |
1MB of memory at addr |
103fee0000 |
Initializing |
15MB of memory at addr |
103f002000 |
Initializing |
16MB of memory at addr |
103e002000 |
Initializing |
992MB of memory at addr |
1000000000 |
Initializing |
1024MB of memory at addr |
0 |
Rebooting with command: boot
Boot device: /pci@1c,600000/scsi@2/disk@0,0:a File and args:
SunOS Release 5.10 Version Generic_118833-17 64-bit
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Hardware watchdog enabled Hostname: vtghost Configuring devices.
Loading smf(5) service descriptions: 1/85 2/85 3/85
...
84/85
85/85
checking ufs filesystems /dev/rdsk/c1t0d0s5: is logging.
Creating new rsa public/private host key pair Creating new dsa public/private host key pair
This system is configured with NFS version 4, which uses a domain name that is automatically derived from the system's name services. The derived domain name is sufficient for most configurations. In a few cases, mounts that cross different domains might cause files to be owned by "nobody" due to the lack of a common domain name.
Do you need to override the system's default NFS version 4 domain name (yes/no) ? [no] :
Step 7 Enter no to continue the reconfiguration process and press Enter.
The system displays information similar to the following:
For more information about how the NFS version 4 default domain name is derived and its impact, refer to the man pages for nfs(4) and nfsmapid(1m), and the System Administration Guide: Network Services.
vtghost console login:
This completes the installation of the Sun Solaris 10 operating system. Proceed to the “Configuring Your Host” section on page 2-50.
|
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide |
2-12 |
OL-18083-01 |
Chapter 2 Installing the Sun Solaris 10 Operating System
Loading the Sun Solaris 10 Operating System
The instructions in this section were written to correspond with the instructions in the Cisco Solaris 10 Operating System Startup Disk for Opteron-based Platforms. Other Solaris installations are similar, with slight variations. These instructions will note the differences between the sets of installation instructions.
Step 1 Choose one of the following options to connect the Cisco PGW 2200 Softswitch:
•Connect to the Cisco PGW 2200 Softswitch through a console port.
•Connect a keyboard and monitor to the Cisco PGW 2200 Softswitch.
Note Cisco recommends that you connect to the Cisco PGW 2200 Softswitch using a keyboard and monitor. If you choose to connect through the console port, you need to ensure that Console Redirection is enabled as instructed in Step 6.
Step 2 Follow these steps to connect to the target system through a serial port:
a. Log in to the SP (Service Processor) as an Administrator:
login: root password: changeme
b. Type the following command to start the ILOM Service Processor (SP) GUI:
start /SP/console
Step 3 This step is optional—if you decide to skip this, go to Step 4.
a.Place the system in single-user mode by shutting down the standby machine.
b.When the machine prompts for a password, type either ^ -d to proceed with normal startup, or the root password for system maintenance.
Step 4 Load the appropriate version of the CD-ROM labeled Cisco Solaris 10 Operating Software Startup Disk for Opteron-based Platforms into the CD-ROM drive.
Step 5 If the system is currently running, log in as root.
Step 6 Boot the system from the CD-ROM drive by entering the appropriate command:
# reboot
Note You may be prompted during the reboot to enter Ctrl-B or Ctrl-C to open configuration tools for your hardware. You do not need to open any of these tools to complete this installation.
Perform the following steps once the reboot starts:
a.Press the F2 key to open the Setup menu. The Setup menu opens after the self-tests have been completed.
b.Go to the BOOT setup information.
c.Ensure that the CD-ROM is the first bootable device in the list.
d.Choose the Advanced menu from the category selections at the top of the screen.
e.If you connected to the Cisco PGW 2200 Softswitch using the console port, ensure Console Redirection is set to enable or always.
|
|
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide |
|
|
||
|
|
|
||||
|
OL-18083-01 |
|
|
2-13 |
|
|
|
|
|
|
Chapter 2 Installing the Sun Solaris 10 Operating System
Loading the Sun Solaris 10 Operating System
f. Save your changes and exit the Setup menu.
Information similar to the following is displayed:
SSC Alert: Host System has Reset
screen not found. keyboard not found.
Keyboard not present. Using ttya for input and output.
Caution Ensure that the selected display device is set to the corresponding console device. If you use a monitor, choose solaris. If you use serial console, select solaris ttya.
SunFire V40z, No Keyboard
Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.13.0, 8192 MB memory installed, Serial #58524225.
Ethernet address 0:3:ba:7d:2:41, Host ID: 837d0241.
Rebooting with command: boot cdrom - install
Boot device: /pci@1e,600000/ide@d/cdrom@0,0:f File and args: - install
SunOS Release 5.10 Version Generic 64-bit
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Hardware watchdog enabled
Configuring devices.
Using RPC Bootparams for network configuration information.
Attempting to configure interface ce2...
Skipped interface ce2
Attempting to configure interface ce1...
Skipped interface ce1
Attempting to configure interface ce0...
Skipped interface ce0
Beginning system identification...
Searching for configuration file(s)...
Search complete.
Discovering additional network configuration...
Completing system identification...
Starting remote procedure call (RPC) services: done.
System identification complete.
Starting Solaris installation program...
Searching for JumpStart directory...
<<< using cdrom install_config >>>
not found
Checking rules.ok file...
Using profile: any_machine
Using finish script: any_finish
Executing JumpStart preinstall phase...
Searching for SolStart directory...
Checking rules.ok file...
Executing profile begin script...
Completed profile begin script.
Processing profile
-Selecting cluster (SUNWCreq)
-Deselecting cluster (SUNWCudf)
-Deselecting cluster (SUNWCbs)
-Deselecting cluster (SUNWCnfss)
-Deselecting cluster (SUNWCsndm)
-Deselecting cluster (SUNWCpcmc)
-Deselecting cluster (SUNWCpicl)
-Selecting cluster (SUNWCacc)
|
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide |
2-14 |
OL-18083-01 |
Chapter 2 Installing the Sun Solaris 10 Operating System
Loading the Sun Solaris 10 Operating System
-Selecting cluster (SUNWCssh)
-Selecting cluster (SUNWCpool)
-Selecting cluster (SUNWCvld)
-Selecting cluster (SUNWCfwshl)
-Selecting cluster (SUNWClu)
-Selecting cluster (SUNWCcpc)
-Selecting cluster (SUNWCsea)
-Selecting cluster (SUNWCstl)
-Selecting cluster (SUNWCmip)
-Selecting cluster (SUNWCqos)
-Selecting cluster (SUNWCzone)
-Selecting cluster (SUNWCzebra)
-Deselecting package (SUNWauda)
-Deselecting package (SUNWad810)
-Deselecting package (SUNWvia823x)
-Deselecting package (SUNWcnsu)
-Deselecting package (SUNWtnamd)
-Deselecting package (SUNWtnamr)
-Deselecting package (SUNWrcmdr)
-Deselecting package (SUNWrcmds)
-Deselecting package (SUNWtftp)
-Deselecting package (SUNWtftpr)
-Deselecting package (SUNWcnsr)
-Deselecting package (SUNWatfsr)
-Deselecting package (SUNWatfsu)
-Deselecting package (SUNWftpr)
-Deselecting package (SUNWftpu)
-Deselecting package (SUNWipmi)
-Deselecting package (SUNWxsvc)
-Deselecting package (SUNWflexruntime)
-Deselecting package (SUNWxwmod)
-Selecting package (SUNWadmc)
-Selecting package (SUNWadmfr)
-Selecting package (SUNWadmfw)
-Selecting package (SUNWdtdmr)
-Selecting package (SUNWxwfnt)
-Selecting package (SUNWzip)
-Selecting package (SUNWless)
-Selecting package (SUNWeurf)
-Selecting package (SUNWj5rt)
-Selecting package (SUNWxwacx)
-Selecting package (SUNWxwice)
-Selecting package (SUNWxwplr)
-Selecting package (SUNWxwrtl)
-Selecting package (SUNWxwplt)
-Selecting package (SUNWxi18n)
-Selecting package (SUNWtltk)
-Selecting package (SUNWeuodf)
-Selecting package (SUNWocf)
-Selecting package (SUNWocfr)
-Selecting package (SUNWbtool)
-Selecting package (SUNWsprot)
-Selecting package (SUNWmdbdm)
-Selecting package (SUNWmkcd)
-Selecting package (SUNWspnego)
-Selecting package (SUNWtnfc)
-Selecting package (SUNWtnfd)
-Selecting package (SUNWbind)
-Selecting package (SUNWbindr)
-Selecting package (SUNWctpls)
-Selecting package (SUNWfss)
-Selecting package (SUNWgcmn)
-Selecting package (SUNWgssdh)
-Selecting package (SUNWgssk)
|
|
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide |
|
|
||
|
|
|
||||
|
OL-18083-01 |
|
|
2-15 |
|
|
|
|
|
|
Chapter 2 Installing the Sun Solaris 10 Operating System
Loading the Sun Solaris 10 Operating System
-Selecting package (SUNWinst)
-Selecting package (SUNWi15rf)
-Selecting package (SUNWipc)
-Selecting package (SUNWmdbr)
-Selecting package (SUNWmfrun)
-Selecting package (SUNWrsg)
-Selecting package (SUNWrsgk)
-Selecting package (SUNWter)
-Selecting package (SUNWtoo)
-Selecting package (SUNW1394)
-Selecting all disks
-Configuring boot device
-Using disk (c1t0d0) for "rootdisk"
-Deleting Solaris fdisk partition (c1t0d0)
-Deleting Solaris fdisk partition (c1t1d0)
-Creating "all" Solaris fdisk partition (c1t0d0)
-Creating "all" Solaris fdisk partition (c1t1d0)
-Configuring / (c1t0d0s0)
-Configuring /var (c1t0d0s1)
-Configuring swap (c1t0d0s3)
- |
Configuring |
(c1t0d0s4) |
- |
Configuring |
(c1t0d0s6) |
-Configuring /opt (c1t0d0s5)
-Deselecting unmodified disk (c1t1d0)
Verifying disk configuration
Verifying space allocation
- Total software size: 420.10 Mbytes
You may need to eject the CD or select a different boot device after reboot to avoid repeating the installation process.
Configuring disk (c1t0d0)
- Creating Fdisk partition table
Fdisk partition table for disk c1t0d0 (input file for fdisk(1M))
type: 130 |
active: |
128 |
offset: 16065 |
size: 143347995 |
|||
type: 100 |
active: |
0 |
offset: 0 |
size: 0 |
|||
type: |
100 |
active: |
0 |
offset: |
0 |
size: |
0 |
type: |
100 |
active: |
0 |
offset: |
0 |
size: |
0 |
- Creating Solaris disk label (VTOC)
Creating and checking UFS file systems - Creating / (c1t0d0s0)
Warning: 1474 sector(s) in last cylinder unallocated /dev/rdsk/c1t0d0s0:4096574 sectors in 667 cylinders of 48 tracks, 128 sectors
|
|
|
2000.3MB in 42 cyl groups (16 c/g, 48.00MB/g, 11648 i/g) |
|
|
|
|
|||||||||
|
|
|
super-block backups (for fsck -F ufs -o b=#) at: |
|
|
|
|
|
|
|||||||
32, |
98464, |
196896, |
295328, |
393760, |
492192, |
590624, |
689056, |
787488, |
885920, |
|
||||||
3149856, 3248288, |
3346720, |
3445152, |
3543584, |
3642016, |
3740448, |
3838880, |
|
|||||||||
3937312, 4035744 |
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
- Creating /var (c1t0d0s1) |
|
|
|
|
|
|
|
|
|
||||
|
|
|
Warning: 4866 sector(s) in last cylinder unallocated |
|
|
|
|
|
|
|||||||
|
|
|
/dev/rdsk/c1t0d0s1:10249470 sectors in 1669 cylinders of 48 tracks, 128 sectors |
|||||||||||||
|
|
|
5004.6MB in 105 cyl groups (16 c/g, 48.00MB/g, 5824 i/g) |
|
|
|
|
|||||||||
|
|
|
super-block backups (for fsck -F ufs -o b=#) at: |
|
|
|
|
|
|
|||||||
32, |
98464, |
196896, |
295328, |
393760, |
492192, |
590624, |
689056, |
787488, |
885920, |
|
||||||
9342880, 9441312, |
9539744, |
9638176, |
9736608, |
9835040, |
9933472, |
10031904, |
|
|||||||||
10130336, |
10228768 |
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
- Creating /opt (c1t0d0s5) |
|
|
|
|
|
|
|
|
|
||||
|
|
|
Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide |
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
||||||||
|
2-16 |
|
|
|
|
|
|
|
|
|
|
|
|
|
OL-18083-01 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|