Data Sheet
Cisco Industrial Ethernet 1000 Series Switches
Product Overview
The Cisco® Industrial Ethernet (IE) 1000 Series Switches are compact rugged switches aimed to operational technology (OT) users with limited IT network knowledge. The IE 1000 Series Switches provide an easy transformation from the legacy factory to digital solution. For machine builders and machine-to-machine (M2M) solutions is an attractive entry level product as a GUI-based, lightly-managed switch. The IE 1000 is a good fit for locations with harsh temperatures and small spaces, and is Power over Ethernet (PoE) capable with and zero IT management.
The IE 1000 is ideal for industrial Ethernet applications where small and easy-to-be-managed hardened products are required, including factory automation, intelligent transportation systems, city-surveillance programs, building automations etc.
The Cisco IE 1000 Series Switches complement the current industrial Ethernet portfolio of related Cisco industrial switches, such as the Cisco IE 2000, IE 3000, IE 4000 and IE 5000 Series managed Switches.
The IE 1000 can be easily installed on your network. Through a user-friendly web device manager, the IE 1000 provides easy out-of-the-box configuration and simplified operational manageability to deliver advanced and secure multiservices over industrial networks.
Features and Benefits
The Cisco IE 1000 Series Switches are designed for low cost, low ports, and small sizes. They offer:
●Scalability: Four models are available supporting 5, 6, 8 and 10 Ethernet ports, with Fast Ethernet (FE) and Gigabit Ethernet (GE), copper and fiber uplinks options
●Easy integration: Zero-touch IP discovery or Dynamic Host Configuration Protocol (DHCP)IP addressing and simple web GUI-based management
●Fast startup time: Starts 30 seconds from cold boot
●Manageability: Web GUI interface, and diagnostics and analysis options through Simple Network Management Protocol (SNMP) and syslog
●Security: secure access; port-security
●Minimize data load: VLAN aware, Internet Group Management Protocol (IGMP) and DHCP snooping to filter unwanted data
●Lightly-managed: Spanning-tree protocol (STP), Link Layer Discovery Protocol (LLDP), Cisco Discovery Protocol aware
●Gigabit uplink: Two fiber-optic SFP based. uplink for up to 50 miles (80 kilometers) links
●Industrial PoE: Up to eight PoE (IEEE 802.af) and PoE+ (802.3at) supported on selected models
●Redundant voltage feeds, alarm relays support and DIN rail mount
●Industrial environmental compliance and certifications: Ethernet/IP (CIP)
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. |
Page 1 of 8 |
Product Specifications
Figure 1 shows switch models, and Table 1 shows the Cisco IE 1000 Series Switches configuration information. Table 2 lists the SKUs for power supplies. Table 3 includes the 1000 product specifications. Table 4 lists software features. Table 5 includes compliance specifications. Table 6 outlines management and relevant industry standards.
Figure 1. Cisco Industrial Ethernet 1000 Series Switches
Table 1. |
Cisco IE 1000 Series Switches Configurations |
|
|
|
|||
|
|
|
|
|
|
|
|
Product Number |
Total Ports |
Fast Ethernet |
GE SFP Uplink |
Fast Ethernet Copper |
PoE/PoE+ |
Input Power |
|
|
|
|
Copper Uplink |
|
Downlink |
|
Voltage |
IE-1000-4T1T-LM |
5 |
1 |
|
4 |
|
12-24V |
|
|
|
|
|
|
|
|
|
IE-1000-6T2T-LM |
8 |
2 |
|
6 |
|
12-24V |
|
|
|
|
|
|
|
|
|
IE-1000-4P2S-LM |
6 |
|
2 |
|
4 |
48-54V |
|
|
|
|
|
|
|
|
|
IE-1000-8P2S-LM |
10 |
|
2 |
|
8 |
48-54V |
|
|
|
|
|
|
|
|
|
|
Table 2. |
Power Supplies and Mounting Kit Available for Cisco IE 1000 Series Switches |
|
|
||||
|
|
|
|
|
|
|
|
|
|
Product Number |
Rated Nominal Input |
Supported Input |
Power Output |
PoE/PoE+ Support |
Use Case Scenario |
|
|
|
|
|
Operating Range |
Voltage Operating |
|
|
|
|
|
|
|
|
Range |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PWR-IE50W-AC= |
AC 100-240V/1.25A |
AC 90-264V |
24VDC/2.1A |
No |
Provides power to |
|
|
|
|
|
50-60Hz |
Or |
|
|
non-PoE PIDs |
|
|
|
|
Or |
DC 106-300V |
|
|
|
|
|
|
|
DC 125-250V/1.25A |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PWR-IE50W-AC- |
AC 100-240V/1.25A |
AC 90-264V |
24VDC/2.1A |
No |
Provides power to |
|
|
|
IEC= |
|
50-60Hz |
|
|
|
non-PoE PIDs |
|
|
|
|
|
|
|
|
|
|
|
PWR-IE65W-PC-AC= |
AC 100-240V/1.4A |
AC 90-264V |
54VDC/1.2 A |
Yes |
Supports up to 3 ports |
|
|
|
|
|
50-60Hz |
Or |
|
|
PoE or 1 PoE+ port |
|
|
|
|
Or |
DC 106-300V |
|
|
when used in PoE |
|
|
|
|
DC 125-250V/1.0A |
|
|
|
power input in an AC |
|
|
|
|
|
|
|
|
or high DC |
|
|
|
|
|
|
|
|
environment |
|
|
|
|
|
|
|
|
|
|
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. |
|
|
Page 2 of 8 |
|||||
Product Number |
Rated Nominal Input |
Supported Input |
Power Output |
PoE/PoE+ Support |
Use Case Scenario |
|
Operating Range |
Voltage Operating |
|
|
|
|
|
Range |
|
|
|
|
|
|
|
|
|
PWR-IE65W-PC-DC= |
DC 24-48VDC/4.5A |
DC 18-60V |
54VDC/1.2 A |
Yes |
Supports up to 3 ports |
|
|
|
|
|
PoE or 1 PoE+ port |
|
|
|
|
|
when used in a DC |
|
|
|
|
|
environment |
|
|
|
|
|
|
PWR-IE170W-PC- |
AC 100-240V/2.3A |
AC 90-264V |
54VDC/3.15A |
Yes |
Support up to 8 ports |
AC= |
50-60Hz |
Or |
|
|
PoE or 5 PoE+ ports |
|
Or |
DC 106-300V |
|
|
when used in AC |
|
DC 125-250V/2.1A |
|
|
|
environment |
|
|
|
|
|
|
PWR-IE170W-PC- |
DC 12-54V/23A |
DC 10.8-60V |
54VDC/3.15A |
Yes |
Support up to 8 ports |
DC= |
|
|
|
|
PoE or 5 PoE+ ports |
|
|
|
|
|
when used in DC |
|
|
|
|
|
environment |
|
|
|
|
|
|
STK-RACK- |
19 in. DIN Rail mount |
|
|
|
|
DINRAIL= |
kit |
|
|
|
|
|
|
|
|
|
|
Table 3. |
Product Specifications |
|
|
|
|
Description |
|
Specification |
|
|
|
Hardware |
|
● DRAM: 128 MB DDR2 without ECC |
|
|
● Onboard flash memory: 160 MB |
|
|
|
Alarm |
|
● Alarm I/O: output connector on top panel of 4P2S and 8P2S, 1.0A@24VDC or 0.5A@48VDC |
|
|
|
Power consumption |
● IE1000-4T1T: 4.2W |
|
|
|
● IE1000-6T2T: 5.3W |
|
|
● IE1000-4P2S: without PoE 8.6W, with PoE 72-140.4W |
|
|
● IE1000-8P2S: without PoE 10.6W, with PoE 134.4-205.2W |
|
|
|
Connectors and |
● 100BASE-FX MMF (2 km)—TBD with engineer input |
|
cabling |
|
● 10/100/1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling |
|
|
|
|
|
|
Dimensions |
|
● IE-1000-4T1T-LM: 5.0” H x 1.50” W x 4.5” D (127mm H x 38mm W x 115mm D) |
(H x W x D) |
|
● IE-1000-6T2T-LM: 5.0” H x 1.8” W x 4.5” D (127mm H x 45.7mm W x 115mm D) |
|
|
|
including DIN rail |
● IE-1000-4P2S-LM, IE-1000-8P2S-LM: 5.0”H x 1.8” W x 5.3”D (127mm H x 45.7mmW x 134mm D) |
|
|
|
|
|
|
● PWR-IE50W-AC=: 5.8"H x 2.0"W x 4.4"D (147mm H x 51 mm W x 112mm D) |
|
|
● PWR-65W-PC-AC=: 5.9 "H x 2.6”W x 4.6”D (150mm H x 66mm W x 117mm D) |
|
|
● PWR-65W-PC-DC=: 5.9 "H x 2.6”W x 4.6"D (150mm H x 66mm W x 117mm D) |
|
|
● PWR-IE170W-PC-AC=: 5.93 x 3.72 x 5.60 in. (150.6 x 94.5 x 142.2mm) |
|
|
● PWR-IE170W-PC-DC=: 5.93 x 4.47 x 5.75 in. (150.6 x 113.5 x 145.8mm) |
|
|
|
Weight |
|
● IE-1000-4T1T-LM - 1.10 lb (0.50 kg) |
|
|
● IE-1000-6T2T-LM - 1.25 lb (0.57 kg) |
|
|
● IE-1000-4P2S-LM - 1.70 lb (0.77 kg) |
|
|
● IE-1000-8P2S-LM - 1.85 lb (0.84 kg) |
|
|
|
Power supply weight |
● PWR-IE50W-AC=: 1.4 lb (0.65 kg) |
|
|
|
● PWR-IE50W-AC-IEC=: 1.4 lb (0.65 kg) |
|
|
● PWR-IE65W-PC-DC=: 2.6 (1.18 Kg) |
|
|
● PWR-IE65W-PC-AC=: 2.7 (1.24 Kg) |
|
|
● PWR-IE170W-PC-AC=: 3.88 pounds (1.76 kg) |
|
|
● PWR-IE170W-PC-DC=: 3.7 pounds (1.67 kg) |
|
|
|
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. |
Page 3 of 8 |
Loading...