Loading...
Ordering Guide
Cisco Aironet 1300 Series Outdoor Access Point or Bridge
The Cisco® Aironet® 1300 Series Outdoor Access Point or Bridge is available with the following choices:
●Operating autonomously or with a Cisco wireless LAN controller as part of a unified architecture
●With a 13-dBi integrated antenna or with RP-TNC connectors for an externally attached antenna
●For the FCC, ETSI, or TELEC regulatory domains
Twelve versions are available for different combinations of these options:
●Cisco Aironet 1310 Outdoor Access Point/Bridge with 13-dBi integrated antenna, FCC config
●Cisco Aironet 1310 Outdoor Access Point/Bridge with 13-dBi integrated antenna, ETSI config
●Cisco Aironet 1310 Outdoor Access Point/Bridge with 13-dBi integrated antenna, TELEC config
●Cisco Aironet 1310 Outdoor Access Point/Bridge with RP-TNC type Connectors, FCC config
●Cisco Aironet 1310 Outdoor Access Point/Bridge with RP-TNC type Connectors, ETSI config
●Cisco Aironet 1310 Outdoor Access Point/Bridge with RP-TNC type Connectors, TELEC config
●Cisco Aironet 1310 LWAPP Outdoor Access Point with 13-dBi integrated antenna, FCC config
●Cisco Aironet 1310 LWAPP Outdoor Access Point with 13-dBi integrated antenna, ETSI config
●Cisco Aironet 1310 LWAPP Outdoor Access Point with 13-dBi integrated antenna, TELEC config
●Cisco Aironet 1310 LWAPP Outdoor Access Point with RP-TNC type connectors, FCC config
●Cisco Aironet 1310 LWAPP Outdoor Access Point with RP-TNC type connectors, ETSI config
●Cisco Aironet 1310 LWAPP Outdoor Access Point with RP-TNC type connectors, TELEC config
A Cisco Aironet 1300 Series device operating autonomously is an intelligent access point or bridge, capable of functioning as a standalone device. As an LWAPP access point, the Cisco Aironet 1300 Series works along with the Cisco wireless LAN controller to enable centralized configuration and management, application of security policies, and seamless mobility. When operating with wireless LAN controllers, Cisco Aironet 1300 Series Outdoor Access Points/Bridges function only as access points and are not capable of bridging.
The integrated antenna versions feature a radio and high-gain patch antenna for user installations of either point-to- point links or non-root nodes of point-to-multipoint networks. The connectorized versions provide professional installers with RP-TNC type connectors that allow the deployment of nodes with omnidirectional, sector, or high-gain dish antennas for longer links. In all cases, the mounting kit must be ordered separately.
All parts, along with accessories such as the Roof Mount Kit, Wall Mount Kit, cable, antennas, and power supplies, are available on the Cisco Systems® global and wholesale price lists.
Cisco Aironet 1300 Series Outdoor Access Point or Bridge with 13-dBi Integrated Antenna
The Cisco Aironet 1300 Series Outdoor Access Point or Bridge features an 802.11g 2.4-GHz radio, which supports data rates up to 54 Mbps. With this option, a 13-dBi patch antenna is integrated into the ruggedized enclosure (Table 1).
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. |
Page 1 of 1 |
Ordering Guide
Table 1. |
Cisco Aironet 1300 Series Outdoor Access Point or Bridge with Integrated Antenna |
|
|
|
|
Product Number |
Product Description |
|
|
|
|
AIR-BR1310G-A-K9 (FCC regulatory domain) |
● Cisco Aironet 1300 Series Outdoor Access Point or Bridge with integrated patch antenna |
|
AIR-BR1310G-E-K9 (EMEA regulatory domain) |
● Cisco IOS® Software |
|
AIR-BR1310G-J-K9 (TELEC regulatory domain) |
● Ships with: |
|
|
|
Power cord (configurable) |
|
|
100 to 240 VAC power supply (AIR-PWR-A=) providing 48 VDC to the power injector |
|
|
48 VDC power injector (AIR-PWRINJ-BLR2=) |
|
|
◦ 1-ft dual RG-6 cable assembly (Ethernet uplink from power injector) |
|
|
● Roof Mount Kit available separately (AIR-ACCRMK1300=) |
|
|
● 12 to 40 VDC power injector (AIR-PWRINJ-BLR2T=) for use with DC power supply |
|
|
installations available separately |
|
|
|
AIR-LAP1310G-A-K9 (FCC regulatory domain) |
● Cisco Aironet 1300 Series Outdoor Access Point with integrated patch antenna |
|
AIR-LAP1310G-E-K9 (EMEA regulatory domain) |
● Cisco Lightweight Access Point Protocol |
|
AIR-LAP1310G-J-K9 (TELEC regulatory domain) |
● Ships with: |
|
|
|
Power cord (configurable) |
|
|
100 to 240 VAC power supply (AIR-PWR-A=) providing 48 VDC to the power injector |
|
|
48 VDC power injector (AIR-PWRINJ-BLR2=) |
|
|
◦ 1-ft dual RG-6 cable assembly (Ethernet uplink from power injector) |
|
|
● Roof Mount Kit available separately (AIR-ACCRMK1300=) |
|
|
● 12 to 40 VDC power Injector (AIR-PWRINJ-BLR2T=) for use with DC power supply |
|
|
installations available separately |
|
|
|
Cisco Aironet 1300 Series Outdoor Access Point/Bridge with RP-TNC Type Connectors
A connectorized version of the Cisco Aironet 1300 Series Outdoor Access Point or Bridge provides professional installers with RP-TNC type connectors that allow the deployment of nodes with omnidirectional, sector, or high-gain dish antennas for custom installations (Table 2).
Table 2. |
Cisco Aironet 1300 Series Outdoor Access Point/Bridge with RP-TNC Type Connectors |
|
|
|
|
Product Number |
Product Description |
|
|
|
|
AIR-BR1310G-A-K9-R (FCC regulatory domain) |
● Cisco Aironet 1300 Series Outdoor Access Point or Bridge with RP-TNC type connector |
|
AIR-BR1310G-E-K9-R (EMEA regulatory domain) |
● Cisco IOS Software |
|
AIR-BR1310G-J-K9-R (TELEC regulatory domain) |
● Ships with: |
|
|
|
Power cord (configurable) |
|
|
100 to 240 VAC power supply (AIR-PWR-A=) providing 48 VDC to the power injector |
|
|
48 VDC power injector (AIR-PWRINJ-BLR2=) |
|
|
◦ 1-ft dual RG-6 cable assembly (Ethernet uplink from power injector) |
|
|
● Roof Mount Kit (AIR-ACCRMK1300=) and Wall Mount Kit (AIR-ACCWAMK1300=) |
|
|
available separately |
|
|
● Optional 5-ft, 2.4-GHz RF jumper cable available separately |
|
|
● Antennas available separately |
AIR-LAP1310G-A-K9R (FCC regulatory domain) |
● Cisco Aironet 1300 Series Outdoor Access Point with RP-TNC type connector |
|
AIR-LAP1310G-E-K9R (EMEA regulatory domain) |
● Cisco Lightweight Access Point Protocol |
|
AIR-LAP1310G-J-K9R (TELEC regulatory domain) |
● Ships with: |
|
|
|
Power cord (configurable) |
|
|
100 to 240 VAC power supply (AIR-PWR-A=) providing 48 VDC to the power injector |
|
|
48 VDC power injector (AIR-PWRINJ-BLR2=) |
|
|
◦ 1-ft dual RG-6 cable assembly (Ethernet uplink from power injector) |
|
|
● Roof Mount Kit (AIR-ACCRMK1300=) and Wall Mount Kit (AIR-ACCWAMK1300=) |
|
|
available separately |
|
|
● Optional 5-ft, 2.4-GHz RF jumper cable available separately |
|
|
● Antennas available separately |
AIR_BR1310G-A-K9-T |
● Ships with: |
|
(FCC regulatory domain for Transportation) |
12 to 40 VDC power injector (AIR-PWRINJ-BLR2T=) for use with DC power supply |
|
|
|
|
|
|
installations |
|
|
1-ft dual RG-6 cable assembly (Ethernet uplink from power injector) |
|
|
◦ Threaded power connector |
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. |
Page 2 of 4 |
Loading...