EVM-HD-8FXS/DID, EM-4BRI-NT/TE,
EM-HDA-8FXS, EM-HDA-6FXO, and
EM-HDA-3FXS/4FXO Documentation Roadmap
Updated 9/27/2004
This document provides links to resources for understanding, installing, and configuring
Cisco high-density extension modules. Use this document in HTML format on Cisco.com.
Products:
EVM-HD-8FXS/DID |
High-density analog and digital extension module for voice and fax |
|
|
EM-4BRI-NT/TE |
4-port BRI S/T digital voice/fax expansion module |
|
|
EM-HDA-8FXS |
8-port FXS analog voice/fax expansion module |
|
|
EM-HDA-6FXO |
6-port FXO analog voice/fax expansion module |
|
|
EM-HDA-3FXS/4FXO |
3-port FXS 4-port FXO analog voice/fax expansion module |
|
|
Note This is a platform-independent document. To see which routers support these products, refer to the documents in the following section.
•Cisco High Density Analog and Digital Extension Module for Voice and Fax, data sheet
•Cisco High Density Analog and Digital Extension Module for Voice and Fax, Q&A
• Cisco Network Modules and Interface Cards Regulatory Compliance and Safety Information
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2004 Cisco Systems, Inc. All rights reserved.