Cisco Systems 880, HIG880, C892FSPK9, 861WGNPK9RF, 861W User Manual

...

0 (0)

Cisco 860 Series and Cisco 880 Series

Integrated Services Routers Hardware

Installation Guide

Americas Headquarters

Cisco Systems, Inc. 170 West Tasman Drive

San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000

800 553-NETS (6387) Fax: 408 527-0883

Text Part Number:

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

The following information is for FCC compliance of Class A devices: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case users will be required to correct the interference at their own expense.

The following information is for FCC compliance of Class B devices: The equipment described in this manual generates and may radiate radio-frequency energy. If it is not installed in accordance with Cisco’s installation instructions, it may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in part 15 of the FCC rules. These specifications are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation.

Modifying the equipment without Cisco’s written authorization may result in the equipment no longer complying with FCC requirements for Class A or Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.

You can determine whether your equipment is causing interference by turning it off. If the interference stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment causes interference to radio or television reception, try to correct the interference by using one or more of the following measures:

•Turn the television or radio antenna until the interference stops.

•Move the equipment to one side or the other of the television or radio.

•Move the equipment farther away from the television or radio.

•Plug the equipment into an outlet that is on a different circuit from the television or radio. (That is, make certain the equipment and the television or radio are on circuits controlled by different circuit breakers or fuses.)

Modifications to this product not authorized by Cisco Systems, Inc. could void the FCC approval and negate your authority to operate the product.

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

CCSP, the Cisco Square Bridge logo, Follow Me Browsing, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Access Registrar, Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Empowering the Internet Generation, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, FormShare, GigaDrive, GigaStack, HomeLink, Internet Quotient, IOS, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, LightStream, Linksys, MeetingPlace, MGX, the Networkers logo, Networking Academy, Network Registrar, Packet, PIX, Post-Routing, Pre-Routing, ProConnect, RateMUX, ScriptShare, SlideCast, SMARTnet, StrataView Plus, SwitchProbe, TeleRouter, The Fastest Way to Increase Your Internet Quotient, TransPath, and VCO are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.

All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0501R)

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide

Preface

This preface describes the objectives, audience, organization, and conventions of this guide, and describes related documents that have additional information. It contains the following sections:

•Objective, page iii

•Audience, page iii

•Organization, page iv

•Conventions, page iv

•Related Documentation, page xi

•Obtaining Documentation and Submitting a Service Request, page xi

Objective

This guide provides an overview and explains how to install, connect, and perform initial configuration for the wireless and nonwireless Cisco 860 series and Cisco 880 series integrated services routers (ISRs). Some information may not apply to your particular router model.

For warranty, service, and support information, see the “Cisco One-Year Limited Hardware Warranty Terms” section in the document Readme First for the Cisco 800 Series Integrated Services Routers that was shipped with your router.

Audience

This guide is intended for Cisco equipment providers who are technically knowledgeable and familiar with Cisco routers and Cisco IOS software and features.

Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide

	OL-16193-01	iii

Preface

Organization

This guide is organized into the following chapters and appendix.

Product Overview	Describes briefly the router models and the hardware
	features available.

Installing the Router	Lists items shipped with the router, equipment and
	tools necessary for installing the router, safety
	warnings and guidelines, and the procedures for
	installing the router.

Connecting the Router	Describes typical connections for the router,
	procedures for connecting the router to various
	devices, and how to verify the connections.

Initial Configuration	Provides the procedures for initially configuring the
	router settings.

Appendix A, “Technical Specifications”	Provides router, port, and cabling specifications.

Conventions

This section describes the conventions used in this guide.

Note Means reader take note. Notes contain helpful suggestions or references to additional information and material.

Caution This symbol means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.

Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide

	iv	OL-16193-01

Preface

Warning IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071

SAVE THESE INSTRUCTIONS

Waarschuwing BELANGRIJKE VEILIGHEIDSINSTRUCTIES

Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt raadplegen.

BEWAAR DEZE INSTRUCTIES

Varoitus TÄRKEITÄ TURVALLISUUSOHJEITA

Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla.

SÄILYTÄ NÄMÄ OHJEET

Attention IMPORTANTES INFORMATIONS DE SÉCURITÉ

Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque avertissement.

CONSERVEZ CES INFORMATIONS

Warnung WICHTIGE SICHERHEITSHINWEISE

Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.

BEWAHREN SIE DIESE HINWEISE GUT AUF.

Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide

	OL-16193-01	v

Preface

Avvertenza IMPORTANTI ISTRUZIONI SULLA SICUREZZA

Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento.

CONSERVARE QUESTE ISTRUZIONI

Advarsel VIKTIGE SIKKERHETSINSTRUKSJONER

Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten.

TA VARE PÅ DISSE INSTRUKSJONENE

Aviso INSTRUÇÕES IMPORTANTES DE SEGURANÇA

Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo.

GUARDE ESTAS INSTRUÇÕES

¡Advertencia! INSTRUCCIONES IMPORTANTES DE SEGURIDAD

Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña a este dispositivo.

GUARDE ESTAS INSTRUCCIONES

Varning! VIKTIGA SÄKERHETSANVISNINGAR

Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning.

SPARA DESSA ANVISNINGAR

Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide

	vi	OL-16193-01

Preface

Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide

	OL-16193-01	vii

Preface

Aviso INSTRUÇÕES IMPORTANTES DE SEGURANÇA

Este símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o número da declaração fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham o dispositivo.

GUARDE ESTAS INSTRUÇÕES

Advarsel VIGTIGE SIKKERHEDSANVISNINGER

Dette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for legemesbeskadigelse. Før du begynder arbejde på udstyr, skal du være opmærksom på de involverede risici, der er ved elektriske kredsløb, og du skal sætte dig ind i standardprocedurer til undgåelse af ulykker. Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed.

GEM DISSE ANVISNINGER

Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide

	viii	OL-16193-01

Cisco Systems 880, HIG880, C892FSPK9, 861WGNPK9RF, 861W User Manual

Preface

Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide

	OL-16193-01	ix

Preface

Warning When installing the product, please use the provided or designated connection cables/power cables/AC adaptors. Using any other cables/adaptors could cause a malfunction or a fire. Electrical Appliance and Material Safety Law prohibits the use of UL-certified cables (that have the “UL” shown on the code) for any other electrical devices than products designated by CISCO. The use of cables that are certified by Electrical Appliance and Material Safety Law (that have “PSE” shown on the code) is not limited to CISCO-designated products. Statement 371.

Warning There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Statement 1015

Warning Do not use this product near water; for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Statement 1035

Warning Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. Statement 1036

Warning Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. Statement 1037

Warning Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. Statement 1038

Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide

	x	OL-16193-01

Preface

Product Overview

This chapter provides an overview of the features available for the Cisco 860 series and Cisco 880 series integrated services routers (ISRs), and contains the following sections:

•General Description, page 1-1

•Cisco 860 Series ISRs, page 1-2

•Cisco 880 Series ISRs, page 1-3

•Hardware Features, page 1-8

Note For compliance and safety information, see the Regulatory Compliance and Safety Information Roadmap that ships with the router and the Regulatory Compliance and Safety Information for Cisco 800 Series and SOHO Series Routers.

Note The illustrations in this document show a wireless router. Both wireless and nonwireless models are available in the Cisco 860 series and Cisco 880 series ISRs. Port and feature locations are similar for both wireless and nonwireless routers.

General Description

The Cisco 860 series and Cisco 880 series ISRs provide data, voice, wireless, integrated Virtual Private Network (VPN), and backup capability to corporate teleworkers and to remote and small offices with fewer than twenty users. These routers are capable of bridging and multiprotocol routing between LAN and WAN ports, and provide advanced features such as (global industry standard) symmetrical high-speed DSL (G.SHDSL), 802.11n, quality of service (QoS), firewall, antivirus protection, and Secure Socket Layer (SSL).

The Cisco 860 series and Cisco 880 series ISRs have a desktop form factor with built-in wall-mount features. These ISRs are powered by an external power supply adapter. The various models differ in the WAN interface and features that they support.

Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide

	OL-16193-01	1-1

Chapter 1 Product Overview

Cisco 860 Series ISRs

The Cisco 860 series ISRs are fixed-configuration data routers that support the following features:

•An integrated 4-port 10/100 Ethernet switch for connecting to the LAN

•A10/100 Fast Ethernet (FE) port for connecting to the WAN

•Optional, embedded-wireless access point

Figure 1-1 shows the front panel details of the Cisco 860 wireless router.

Figure 1-1 Front Panel of the Cisco 860 Series Wireless ISR

231969

1 LEDs

Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide

1-2	OL-16193-01

Chapter 1 Product Overview

Cisco 880 Series ISRs

Figure 1-2 shows the back panel details of the Cisco 861 wireless (861W) ISR. Nonwireless routers do not have antennas or connectors on the back panel. However, the feature locations are similar for all Cisco 860 series routers.

Figure 1-2 Back Panel of the Cisco 861-W ISR

Cisco 861W

WAN

FE 4

232181

	1	2		3	4	5	6	7	8

1	Primary WAN port—10/100 FE		5	Reset button

2	Antenna—captive omnidirectional dipole		6	Power connector
	WLAN antenna (wireless models only)

3	4-port 10/100 Ethernet switch		7	Earth ground connector

4	Serial port—console or auxiliary		8	Kensington security slot

Cisco 880 Series ISRs

The Cisco 880 series ISRs have data and voice capabilities. They have the following features:

•Integrated 4-port 10/100 Ethernet switch for connecting to the LAN

•10/100 FE, or a G.SHDSL port for connecting to the WAN

•Optional, 802.11n embedded-wireless access point

•Optional, Power over Ethernet (PoE)

•DIMM expansion socket that can accept up to 512 MB of additional memory, for a total of 768 MB The following features are located on the front panel:

•USB 1.1 port

•Express card slot for third-generation (3G) cellular data WAN connectivity, available only on the Cisco 88xG models

Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide

	OL-16193-01	1-3

Chapter 1 Product Overview

Cisco 880 Series ISRs

Cisco 880 Series Data Routers

The Cisco 880 series data routers provide integrated VPN, wireless, 3G, and backup capabilities. Figure 1-3 and Figure 1-4 show the features available on Cisco 880 series data routers. Some of the features shown may not be available on your router.

Figure 1-3 shows the front panel details of the Cisco 880 wireless data router. The USB port and the 3G card slot are located on the front panel.

Figure 1-3 Front Panel of the Cisco 880 Series Wireless Data Router

231950

1	2	3
1 LED	3 USB port

23G express card slot—Supports third-party1

3G card (Cisco 88xG models only)

1.See the Cisco 880 series ISRs data sheet for supported vendors.

Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide

1-4	OL-16193-01

Chapter 1 Product Overview

Cisco 880 Series ISRs

Figure 1-4 shows the back panel details of the Cisco 888W data router. Nonwireless routers do not have antennas or connectors on the back panel. However, the feature locations are similar across all Cisco 880 series data routers.

Figure 1-4 Back Panel of the Cisco 888-W Data Router

									231951
1	2	3	4	5	6	7	8	9	10

1	ISDN port—not available on 3G models	6	PoE power connector

2	Primary WAN port—G.SHDSL or 10/100 FE1	7	Reset button
3	Antenna—captive omnidirectional dipole	8	Power connector
	WLAN antenna (wireless models only)

4	4-port 10/100 Ethernet switch	9	Earth ground connector

5	Serial port—console or auxiliary	10	Kensington security slot

1. The 10/100 FE WAN port is located at the bottom left corner. See Figure 1-2.

Cisco 880 Series Voice Routers

The Cisco 880 series voice routers provide managed voice services that interface with Foreign Exchange Station (FXS), Foreign Exchange Office (FXO), or Basic Rate Interface (BRI) connections. Figure 1-5, Figure 1-6, and Figure 1-7, show the features available on the Cisco 880 series voice routers. The features available vary depending on the router model. Some features may not be available on your router.

Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide

	OL-16193-01	1-5

Chapter 1 Product Overview

Cisco 880 Series ISRs

Figure 1-5 shows the front panel details of the Cisco 880 wireless voice router.

Figure 1-5 Front Panel of the Cisco 880 Series Wireless Voice Router

270495

1	2
1 LEDs	2 USB port

Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide

1-6	OL-16193-01

Chapter 1 Product Overview

Cisco 880 Series ISRs

Figure 1-6 shows the back panel details of the Cisco 880SRST-W voice router.

Figure 1-6 Back Panel of the Cisco C881SRST-W Voice Router

										241904
6	1	2	2	3	4	5	7	8	9	10

1	Primary WAN port—10/100 FE	6	Antenna—captive wireless omnidirectional
			dipole WLAN antenna (wireless models only)

2	Voice ports—four FXS1/DID2 ports, one	7	Reset button
	FXO3 port with TBP4 power failover
3	4-port 10/100 Ethernet switch	8	Power connector

4	Serial port—console or auxiliary	9	Earth ground connector

5	PoE power connector	10	Kensington security slot

1.FXS = Foreign Exchange Station.

2.DID = Direct Inward Dialing.

3.FXO = Foreign Exchange Office.

4.TBP = trunk bypass.

Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide

	OL-16193-01	1-7

Chapter 1 Product Overview

Hardware Features

Figure 1-7 shows the back panel details of the Cisco 888SRST-W voice router.

Figure 1-7 Back Panel of the Cisco C888SRST-W Voice Router

										241905
2	1	2	6	3	4	5	7	8	9	10

1	Primary WAN port—G.SHDSL	6	Antenna—captive wireless omnidirectional
			dipole WLAN antenna (wireless models only)

2	Voice ports—four FXS1/DID2 ports, and one	7	Reset button
	voice BRI3 port
3	4-port 10/100 Ethernet switch	8	Power connector

4	Serial port—console or auxiliary	9	Earth ground connector

5	PoE power connector	10	Kensington security slot

1.FXS = Foreign Exchange Station.

2.DID = Direct Inward Dialing.

3.BRI = Basic Rate Interface.

Hardware Features

This section provides an overview of the following hardware features for the Cisco 860 series and Cisco 880 series ISRs. A feature summary is available at the end of this section.

•Kensington Lock

•Reset Button

•LEDs

•Memory

•USB Port

•Fan

•Power over Ethernet Module

•3G Cellular Data WAN Connectivity

Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide

1-8	OL-16193-01

+ 46 hidden pages

	xii	OL-16193-01