Cisco Systems 1760 User Manual

0 (0)

Quick Start Guide

Cisco 1760 Modular Access Router Cabling and Installation

INCLUDING LICENSE AND WARRANTY

1Cisco One-Year Limited Hardware Warranty Terms

2Overview

3Parts List

4Mounting the Router in a Rack

5Installing WIC/VIC Cards

6Connecting the Router to Your Local Network

7Connect Power and Verify Installation

8Connect a PC to the Router Console Port

9Perform Initial Configuration

10Use the CLI to Configure VoIP

11Obtaining Documentation

12Documentation Feedback

13Cisco Product Security Overview

14Obtaining Technical Assistance

15Obtaining Additional Publications and Information

1 Cisco One-Year Limited Hardware Warranty Terms

There are special terms applicable to your hardware warranty and various services that you can use during the warranty period. Your formal Warranty Statement, including the warranties and license agreements applicable to Cisco software, is available on Cisco.com. Follow these steps to access and download the Cisco Information Packet and your warranty and license agreements from Cisco.com.

1.Launch your browser, and go to this URL: http://www.cisco.com/univercd/cc/td/doc/es_inpck/cetrans.htm The Warranties and License Agreements page appears.

2.To read the Cisco Information Packet, follow these steps:

a.Click the Information Packet Number field, and make sure that the part number 78-5235-03A0 is highlighted.

b.Select the language in which you would like to read the document.

c.Click Go.

The Cisco Limited Warranty and Software License page from the Information Packet appears.

d.Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document Format (PDF).

Note You must have Adobe Acrobat Reader to view and print PDF files. You can download the reader from Adobe’s website: http://www.adobe.com

3.To read translated and localized warranty information about your product, follow these steps:

a.Enter this part number in the Warranty Document Number field: 78-10747-01C0

b.Select the language in which you would like to view the document.

c.Click Go.

The Cisco warranty page appears.

d.Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document Format (PDF).

You can also contact the Cisco service and support website for assistance:

http://www.cisco.com/public/Support_root.shtml.

Duration of Hardware Warranty

One (1) Year

Replacement, Repair, or Refund Policy for Hardware

Cisco or its service center will use commercially reasonable efforts to ship a replacement part within ten (10) working days after receipt of a Return Materials Authorization (RMA) request. Actual delivery times can vary, depending on the customer location.

Cisco reserves the right to refund the purchase price as its exclusive warranty remedy.

To Receive a Return Materials Authorization (RMA) Number

Contact the company from whom you purchased the product. If you purchased the product directly from Cisco, contact your Cisco Sales and Service Representative.

2

Complete the information below, and keep it for reference.

Company product purchased from

Company telephone number

Product model number

Product serial number

Maintenance contract number

2 Overview

This document describes the hardware installation and software configuration steps necessary to install your Cisco 1760 modular access router with its complement of WAN interface cards (WICs) and voice interface cards (VICs). Additional documentation can be found on Cisco.com.

Product Serial Number Location

The serial number label for Cisco 1760 router is located on the rear of the chassis, in the lower right-hand corner.

3 Parts List

Your router package should include the following items:

One Cisco 1760 modular access router

One blue RJ-45-to-DB-9 console cable

One DB-25-to-DB-9 adapter

One black power supply cord

Cable guide

Rack-mounting brackets

Product documentation

4 Mounting the Router in a Rack

Warning

To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure

 

that the system remains stable. The following guidelines are provided to ensure your safety.

 

 

This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of the rack.

If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack.

The rack-mounting brackets supplied with the router can be attached to a 19or 24-inch rack. Figure 1 shows the bracket mounting points that attach to the rack.

3

Figure 1 Bracket Mounting Points

19" rack

24" rack

mount point

mount point

38398

19" rack

24" rack

mount point

mount point

To install the router in a 19-inch or a 24-inch standard rack, follow the instructions described in these procedures:

Attaching Brackets to the Router

Attaching Brackets to the Rack

Attaching the Optional Cable Guide

Attaching Brackets to the Router

The bracket orientation and the screws you use depend on whether you are attaching the brackets for a 19-inch or a 24-inch rack. Use two of the supplied screws to attach each bracket, according to the following guidelines:

For a 19-inch rack, use the supplied number-8 Phillips flat-head screws to attach the long side of the bracket to the router.

For a 24-inch rack, use the supplied number-8 Phillips truss-head screws to attach the short side of the bracket to the router. Figure 2 shows how to attach brackets to the two sides of the router with the front panel forward.

Figure 2 Attaching Brackets for 19and 24-Inch Racks

PWR

OK

19" Configuration

Phillips flat-head screws

60942

4

Cisco Systems 1760 User Manual

PWR

OK

24" Configuration

Phillips truss-head screws

60943

Attaching Brackets to the Rack

After the brackets are attached to the router, use the four supplied number-12 Phillips machine screws to securely attach the brackets to the rack, as shown in Figure 3.

Caution Make sure that the fans on the side of the chassis are not blocked.

Figure 3 Attaching Brackets to the Rack

PWR

 

 

 

 

 

 

 

 

 

 

 

 

CONSOLE

OK PVDM0

 

 

 

 

 

 

 

 

 

 

 

 

 

PVDM1

MOD

 

 

 

 

 

 

 

 

 

 

 

OK

 

 

 

 

 

 

 

 

 

 

 

OK

OK

SLOT0

0

 

 

 

 

 

 

 

 

 

 

 

 

OK

 

1

SLOT1

0

1

 

 

 

 

 

 

 

 

 

 

 

OK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ACT COL

FDX

100

 

 

 

 

 

 

 

 

 

 

 

 

LINK

10/100 ETHERNET

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUX

SLOT2

0

1

 

 

 

OK

 

SLOT3

0

1

 

 

 

OK

 

Phillips machine screws

Cisco 1700

Series

60941

Attaching the Optional Cable Guide

Cisco recommends attaching the cable guide to prevent the cables from obscuring the front panel of the router and the other devices installed in the rack. If the router is in a 19-inch or 24-inch rack, use the supplied black screw, as shown in Figure 4, to attach the cable guide to the left or right bracket.

5

Figure 4 Attaching the Cable Guide to the Router

PWR

OK

PVDM0

PVDM1

 

 

 

 

 

 

 

 

 

OK

OK

MOD

SLOT0

 

 

 

 

 

 

 

 

OK

0

1

 

 

 

 

 

 

 

 

OK

SLOT1

0

 

 

 

 

 

 

 

 

 

OK

 

1

ACT

COL

FDX

 

 

 

100

LINK

 

 

 

CONSOLE

10/100 ETHERNET AUX

Cisco

Series

1700

SLOT2

0

1

 

 

 

OK

 

 

SLOT3

0

1

 

 

 

OK

 

65286

Cable guide screw

5 Installing WIC/VIC Cards

The router has four card slots that hold Cisco WICs and VICs. Either one or two WICs may be installed, with the remaining slots holding VICs, as desired. If no WICs are present in the slots, up to four VICs may be installed. Each WIC has one or two WAN ports, and each VIC has two or more voice ports. This section describes the procedure for installing a WIC or a VIC in the router.

Note For details on specific WICs and VICs, on how to connect a WIC to the WAN line or a VIC to the telephone and fax line, and on how to configure the interface with Cisco IOS software, refer to the Cisco WAN Interface Cards Hardware Installation Guide that came with the cards.

Safety Information

This section lists safety warnings that you should be aware of before installing WICs or VICs in the router. To see translated versions of these warnings, refer to the Regulatory Compliance and Safety Information for the Cisco 1700 Routers document that came with the router.

Warning

Before working on a system that has an on/off switch, turn off the power and unplug the power cord.

Warning

Warning

Warning

Only trained and qualified personnel should be allowed to install or replace this equipment.

Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and watches). Metal objects will heat up when connected to power and ground and can cause serious burns or weld the metal object to the terminals.

Before opening the chassis, disconnect the telephone-network cables (from the card) to avoid contact with the telephone-network voltages.

Warning

Do not work on the system or connect or disconnect cables during periods of lightning activity.

6

Caution Do not connect a WAN, telephone or fax cable to the card until you have completed the installation procedure.

Card Installation

Follow these steps to insert a card in the router:

Step 1 Make sure the router is turned off and is disconnected from AC power.

Caution Power must be removed from the system prior to installing or removing WICs or VICs to avoid damaging them. When WICs or VICs are pushed into or pulled out of a router that is powered up, there is a very good chance that they could be damaged electrically and will no longer function.

Step 2 Loosen the thumbscrews on the WIC or VIC slot cover, as shown in Figure 5.

Figure 5 Removing a WIC or VIC Slot Cover

PWR

OK

PVDM0

PVDM1

 

 

 

 

 

 

 

 

 

OK

MOD

 

 

 

 

 

 

 

 

OK

OK

SLOT0

0

 

 

 

 

 

 

 

 

 

OK

 

1

SLOT1

0

 

 

 

 

 

 

 

 

 

OK

 

1

ACT

COL

FDX

 

 

 

100

LINK

 

 

 

 

CONSOLE

10/100

ETHERNET

 

AUX

Cisco

Series

1700

SLOT2

0

1

 

 

 

OK

 

SLOT3

0

 

 

 

 

OK

 

1

60950

You should be able to loosen the screws using your fingers; however, if the screws are very tight, you may need to use a Phillips screwdriver.

Step 3 Remove the metal plate that covers the card slot.

Step 4 Hold the card by the edges on either side of the card front panel, and line up the card edges with the guides inside the card slot, as shown in Figure 6.

Figure 6 Inserting a WIC or VIC in the Router

1 2

PWR

OK

PVDM0

PVDM1

 

 

 

 

 

 

 

 

 

OK

MOD

 

 

 

 

 

 

 

 

OK

OK

SLOT0

0

 

 

 

 

 

 

 

 

 

OK

 

1

SLOT1

0

 

 

 

 

 

 

 

 

 

OK

 

1

ACT

COL

FDX

 

 

 

 

 

100

LINK

 

CONSOLE

10/100

ETHERNET

 

AUX

Cisco

Series

1700

SLOT2

0

1

 

 

 

OK

 

SLOT3

0

 

 

 

 

OK

 

1

60949

1

Interface Card

2

Guides

 

 

 

 

Step 5 Insert the card in the slot, and gently push it into the router until the front panel of the card is flush with the router.

7

Note Slots 2 and 3 accept VICs only. These slots have a small metal tab on the right side that interferes with a similar tab on WICs, preventing the insertion of WICs by mistake.

Step 6 Tighten the screws that are on the card.

Voice Port Verification

When the router is connected to a PC and you are running the command-line interface, as described in the “Connect a PC to the Router Console Port” section, you can enter the show voice port command to identify the port numbers of voice interfaces installed in your router:

Router# show voice port slot-number/port-number

As an example of voice port numbering, if you install VICs in both slot 1 and slot 2 of the router, the ports in each of these slots would be numbered as follows:

Slot 1—1/0 and 1/1

Slot 2—2/0 and 2/1

Figure 7 shows the Cisco 1760 router front panel and slot numbering.

Figure 7 Cisco 1760 Router Front Panel

1

2

3

4

5

 

 

 

PWR

OK PVDM0 PVDM1

MOD

SLOT0

0

1

SLOT1

0

1

ACT COL FDX

100

LINK 10/100 ETHERNET

 

 

 

 

 

 

 

 

 

 

OK

OK

OK

OK

 

 

OK

 

 

 

 

 

CONSOLE

AUX

Cisco 1700 Series

THESE SLOTS ACCEPT ONLY VOICE INTERFACE CARDS

SLOT2

0

1

SLOT3

0

1

OK

 

 

OK

 

 

60906

16

15

14

13 12

11

10

9

8

7

6

 

 

 

 

 

 

 

 

1

WIC/VIC Slot 0

 

 

 

9

Ethernet Port

 

 

 

 

 

 

 

 

 

2

WIC/VIC Slot 1

 

 

 

10

Ethernet LEDs

 

 

 

 

 

 

 

 

 

3

Console Port

 

 

 

11

Slot 1 LEDs

 

 

 

 

 

 

 

 

 

4

VIC Slot 2

 

 

 

12

Slot 0 LEDs

 

 

 

 

 

 

 

 

 

5

VIC Slot 3

 

 

 

13

MOD OK LED

 

 

 

 

 

 

 

 

6

Slot 3 LEDs

 

 

 

14

PVDM 0/1 OK LEDs

 

 

 

 

 

 

 

 

7

Slot 2 LEDs

 

 

 

15

Router OK LED

 

 

 

 

 

 

 

 

 

8

Auxiliary Port

 

 

 

16

Power LED

 

 

 

 

 

 

 

 

 

 

 

6 Connecting the Router to Your Local Network

The router is connected to your local Ethernet network through the yellow 10/100 Ethernet port. You must provide the following items for this connection:

A straight-through, RJ-45-to-RJ-45 Ethernet cable

A 10/100-Mbps Ethernet hub or switch

8

Warning

The ports labeled 10/100-Mbps Ethernet port and Console port are safety extra-low voltage (SELV) circuits. SELV

 

circuits should only be connected to other SELV circuits. Because BRI circuits are treated like telephone-network

 

voltage, avoid connecting the SELV circuits to the telephone network voltage (TNV) circuits. (To see translated

 

versions of this warning, refer to the Regulatory Compliance and Safety Information for Cisco 1700 Routers

 

document that came with the router.)

 

 

Caution Always connect the Ethernet cable to the yellow ports on the router. Do not connect the cable to an ISDN S/T or U port on a WIC or to an NT1 that is connected to a WIC. Accidentally connecting the cable to the wrong port can damage your router.

Follow these steps to connect the router to your local network:

Step 1 Connect one end of the Ethernet cable to the yellow Ethernet port (labeled 10/100-Mbps Ethernet port), as shown in Figure 8.

Figure 8 Connecting the Router to the Local Network

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONSOLE

 

 

 

 

 

 

 

PWR

OK

PVDM0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PVDM1

MOD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OK

OK

SLOT0

0

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OK

 

 

SLOT1

0

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OK

 

 

 

 

 

 

 

 

 

Cisco

 

 

 

 

 

 

 

 

 

 

 

 

ACT COL

FDX

100

LINK

10/100 ETHERNET

 

 

 

 

1700

Series

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUX

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SLOT2

0

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OK

 

 

SLOT3

0

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OK

 

 

 

1

2

 

 

 

 

 

1X

2X

ETHERNET

 

 

 

 

 

 

 

 

 

 

 

3X

 

4X

 

SPEED

LED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

100BaseTX

1

2

 

 

 

 

 

 

 

 

 

SOLID

3

4

 

 

 

 

 

 

 

10BaseT

 

 

 

 

 

 

 

 

 

BLINK

5

6

7

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

5X

 

6X

7X

 

 

 

 

 

 

 

 

 

 

 

8X

 

 

 

 

 

 

 

 

 

 

MDI

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MDI-X

 

 

 

 

 

 

 

 

 

 

 

60945

1

10/100 Ethernet port

3

Straight-through Ethernet cable

 

 

 

 

 

 

2

Ethernet hub or switch

 

 

 

 

 

 

 

 

Step 2

Connect the other end of the Ethernet cable to a network port on the hub or switch.

 

 

 

 

 

7 Connect Power and Verify Installation

Read the following warnings before connecting the power to the router.

Warning

The power supply is designed to work with TN power systems.

9

Warning

Warning

Warning

Warning

This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that a fuse or circuit breaker no larger than 120VAC, 15A U.S. (240VAC, 16A international) is used on the phase conductors (all current-carrying conductors).

This equipment needs to be grounded. Use a green-and-yellow 14 AWG ground wire to connect the host to earth ground during normal use.

When installing the unit, always make the ground connection first and disconnect it last.

Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available.

Follow these steps to connect power to the router and to turn the router on:

Step 1 Connect the separate power cord to the power socket on the rear panel, as shown in Figure 9.

Figure 9 Connecting the Power Supply

1.5100-240V~ MAX/1.5A MAX

50-60

Hz

 

60948

Step 2

Connect the other end of the separate power cord to a power outlet.

Step 3

Turn the power switch to on ( | ).

Step 4

Verify that you have correctly installed the router by checking the following LEDs:

PWR—On when power is being supplied to the router.

LINK—On when the router is correctly connected to the local Ethernet LAN through the 10/100-Mbps Ethernet port.

ETH ACT—Blinking when there is network traffic on the local Ethernet LAN.

SLOT OK—On when a WIC is correctly installed in the slot.

PVDM 0/1 OK—On when a packet voice data module (PVDM) is correctly installed in its slot and is recognized by the system.

10

MOD OK—On when the virtual private network (VPN) module is correctly installed in its slot and is recognized by the system.

8 Connect a PC to the Router Console Port

Connect a PC to the router’s console port and establish a console session to view startup messages and verify voice card installation. Follow these steps to connect the router to a terminal or PC:

Step 1 Connect the light blue console cable to the blue console port on the router, as shown in Figure 10.

Figure 10 Connecting the Console Cable to the Router

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONSOLE

 

 

 

 

 

 

 

 

PWR

OK

PVDM0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PVDM1

MOD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OK

OK

SLOT0

0

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OK

 

 

SLOT1

0

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OK

 

 

 

 

 

 

 

 

 

Cisco

 

 

 

 

 

 

 

 

 

 

 

 

 

ACT COL

FDX

100

LINK

10/100 ETHERNET

 

 

 

 

1700

S

eries

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUX

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SLOT2

0

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OK

 

 

SLOT3

0

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OK

 

 

 

 

1

3

2

60946

1

Blue console port

3

Light blue console cable

 

 

 

 

2

To PC or terminal

 

 

 

 

 

 

Step 2 Use the console adapter to connect the other end of the cable to the terminal or PC. If your terminal or PC has a console port that does not fit the adapter included with the router, you must provide the correct adapter for that port.

Step 3 Start HyperTerminal or a similar terminal emulation program on your PC. Select the appropriate PC COM port. Set the configurations to 9600 baud, 8 data bits, 1 stop bit, no flow control, and no parity.

Startup messages begin to appear in your terminal emulation program window.

Caution Do not press any keys on the keyboard until the messages stop. Any keys pressed during this time are interpreted as the first command typed when the messages stop, which might cause the router to power off and start over. It will take a few minutes for the messages to stop.

If you see the following messages, the router has booted with a configuration file and is ready for initial configuration using the Cisco Router and Security Device Manager (SDM):

yourname con0 is now available

Press RETURN to get started.

See the “Initial Configuration Using Cisco Router and Security Device Manager” section on page 12 to learn how to configure your router using SDM or to learn how to obtain SDM and install it on your router.

If you see the following messages, the router has booted and is ready for initial configuration using the setup command facility or the command-line interface (CLI):

11

--- System Configuration Dialog ---

At any point you may enter a question mark '?' for help. Use ctrl-c to abort configuration dialog at any prompt. Default settings are in square brackets '[]'.

Would you like to enter the initial configuration dialog? [yes/no]:

To learn how to use the CLI to configure the router, see the “Initial Configuration Using Cisco CLI—Manual Configuration” section on page 12.

9 Perform Initial Configuration

You can configure your router by using one of the following tools:

Security Device Manager—If your router was purchased with a VPN bundle, Security Device Manager is installed on the router. See “Initial Configuration Using Cisco Router and Security Device Manager” to determine if SDM is installed on the router. For instructions on configuring your router by using SDM, refer to the Cisco Security Device Manager (SDM) Quick Start Guide that shipped with your router. Voice over IP configuration must be done using the CLI, but you can use SDM to configure LAN and WAN connections, firewalls, VPNs, routing and other features.

Command-line interface (CLI)—If you prefer to use the Cisco IOS CLI, see the “Initial Configuration Using Cisco CLI—Manual Configuration” section on page 12 for instructions on how to use the CLI.

Initial Configuration Using Cisco Router and Security Device Manager

If the following messages appear at the end of the startup sequence, Cisco Router and Security Device Manager (SDM) is installed on your router:

yourname con0 is now available

Press RETURN to get started.

For instructions on configuring your router by using SDM, refer to the Cisco Router and Security Device Manager (SDM) Quick Start Guide that shipped with your router.

Tip If the messages above do not appear, SDM and the Cisco Router and Security Device Manager (SDM) Quick Start Guide were not shipped with your router. If you want to use SDM, you can download the latest version of SDM and instructions for installing it on your router from the following location:

http://www.cisco.com/pcgi-bin/tablebuild.pl/sdm

To obtain the SDM quick start guide, SDM release notes, and other SDM documentation, go to www.cisco.com/go/sdm and click the Technical Documentation link.

Initial Configuration Using Cisco CLI—Manual Configuration

This section shows how to display a command-line interface (CLI) prompt for configuration using the CLI, and it directs you to documentation for the CLI configuration.

You can use the CLI if the following messages appear at the end of the startup sequence:

--- System Configuration Dialog ---

At any point you may enter a question mark '?' for help.

Use ctrl-c to abort configuration dialog at any prompt.

Default settings are in square brackets '[]'.

Would you like to enter the initial configuration dialog? [yes/no]:

12

Loading...
+ 28 hidden pages