Workboard Faucets
1 Position faucet base and gasket. |
3a Optional accessory for low profile wall |
|
|
mounted installation |
|
|
520-001KJKABRBF |
|
|
Low Profile 90º Elbow Pair, |
|
|
1/2˝ NPSM x 1/2˝ NPSM. |
|
|
(not supplied) |
2˝ |
|
|
Minimum |
|
|
Clearance |
6Follow instructions included with spout assembly. Attach spout and tighten.
2 Attach washers and locking nuts and tighten. |
4 Connect to water supply. |
7 Remove outlet, flush lines for at least 2 minutes, |
|
|
and reinstall outlet. |
For typical applications, up to 14 Ga (.080˝), two washers are required.
For installation with deck thickness above
14 Ga (.080˝), only one washer is required.
3 Attach water inlet hoses and tighten.
Can accommodate bull nose risers.
5 Attach handles and color-coded index buttons.
For deck fittings, handles rotate clockwise to open.
For wall fittings, handles rotate counterclockwise to open.
Closed Position