96157
5 IN 1 PORTABLE POWER PACK
Model
96157
OPERATION INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2007 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Page 2SKU 96157
For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Case Thermoplastic housing with mold-over armored rubber
Battery 12V/18Ah Lead-acid Battery
Cables 36” Long 6AWG gauge coated copper wire
Power Output Two 115VAC outlets
Outlet Socket Two 12 VDC
Input Port AC-DC Charging Ports with Adapters
Weight 19.6 Pounds
Other Features
600 Amp Crank, 1000 Amp Surge Jumpstart
Push-button Battery Test
5 L.E.D. Work Light,
DC Volts Gauge, 1.75” Dia.
12V 260 PSI Compressor w/ 24” L. Hose & Gauge
3 Air Nozzle Adapters
Push-in Fuse for Cooling Fan
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly dia-
gram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit. 1. Cluttered benches and dark areas invite
accidents.
Do not operate the Power Pack in explosive atmospheres, such as in the pres-2.
ence of flammable liquids, gases, or dust. The Power Pack can create sparks
which may ignite the dust or fumes.
Keep bystanders and children away while operating the Power Pack. 3. Distrac-
tions can cause you to lose control. Provide barriers or shields as needed.
REV 08a
Page 3SKU 96157
For technical questions, please call 1-800-444-3353.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges, 4.
and refrigerators. There is an increased risk of electric shock if your body is
grounded.
Do not expose the Power Pack to rain or wet conditions. 5. Water entering the
Power Pack will increase the risk of electric shock.
Stay alert. 6. Watch what you are doing, and use common sense when operating
the Power Pack. Do not use the Power Pack while tired or under the influence of
drugs, alcohol, or medication. A moment of inattention while operating power tools
may result in serious personal injury.
Use safety equipment. 7. Always wear ANSI-approved eye protection. Dust mask,
nonskid safety shoes, hard hat, or hearing protection must be used for appropriate
conditions.
Do not force the Power Pack. 8. Use the correct tool for your application. The cor-
rect tool will do the job better and safer at the rate for which it is designed. Do not
force the tool and do not use the tool for a purpose for which it is not intended.
Do not use the Power Pack if the Power Switch does not turn it on or off. 9. Any
tool that cannot be controlled with the Power Switch is dangerous and must be
replaced.
Disconnect the Power Pack from the power source before making any ad-10.
justments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
Store idle tools out of reach of children and other untrained persons. 11. Tools
are dangerous in the hands of untrained users.
Maintain labels and nameplates on the tool. 12. These carry important information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
People with pacemakers should consult their physician(s) before use. 13. Elec-
tromagnetic fields in close proximity to heart pacemaker could cause pacemaker
interference or pacemaker failure.
WARNING: This product contains lead, which is a chemical known to the State 14.
of California to cause cancer and birth defects or other reproductive harm.
(California Health & Safety Code § 25249.5, et seq.)
Avoid contact with Battery Acid. 15. If splashed, immediately wash effected area
with clean water. Continue washing area until medical help arrives.
Connect cables to proper polarities. 16. Connect black cable to negative body ground
and red cable to positive battery terminal.
Do not allow the Black and Red clamps to touch. 17. Injury to the operator or prop-
erty damage can occur if this happens.
Loading...