91797
ELECTRIC FIREPLACE HEATER
WITH SINGLE GLASS DOOR
91797
ASSEMBLY AND OPERATING INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2004 by Harbor Freight Tools®. All rights reserved. No portion of this manual
or any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
SPECIFICATIONS
ITEM DESCRIPTION
Power Requirements 120 VAC, 60 Hz, 15 Amps
Heater Settings 750 and 1500 Watts
Heater Controls Fan On/Off switch; 2 -2750W On/Off switches;
Fire light On/Off switch; Temperature thermostate knob; Fire light brightness knob; Remote
Control Unit
Line Cord Two-prong polarized plug; 16 AWG x 2C; UL
listed
Light Bulbs 2 - 60W candelabra bulbs
Overall Dimensions 20-3/8 (L) x 11-1/2 (W) x 22-3/4 (H) inches
Weight 39 Lbs.
The maximum room size of the heater is 400 square foot.
SAVE THIS MANUAL
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions
listed below may result in electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
Work Area
1. Keep the area surrounding this appliance clean and orderly.
2. Do not operate this heater in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust.
For technical questions, please call 1-800-444-3353
REV 07j; 08d
Page 2SKU 91797
Electrical Safety
3. Avoid body contact with grounded surfaces such as pipes, radiators, ranges,
and refrigerators. There is an increased risk of electric shock if your body is
grounded.
4. Do not expose appliances to rain or wet conditions. Water entering a appliance
will increase the risk of electric shock.
5. Grounded products must be plugged into an outlet properly installed and
grounded in accordance with all codes and ordinances. Never remove the
grounding prong or modify the plug in any way. Do not use any adapter plugs.
Check with a qualified electrician if you are in doubt as to whether the outlet
is properly grounded. If the product should electrically malfunction or break down,
grounding provides a low resistance path to carry electricity away from the user.
6. Double insulated appliances are equipped with a polarized plug (one blade is
wider than the other). This plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install a polarized outlet. Do not change
the plug in any way. Double insulation eliminates the need for the three wire
grounded power cord and grounded power supply system.
7. Do not abuse the Power Cord. Never use the Power Cord to pull the Plug from
an outlet. Keep the Power Cord away from heat, oil, sharp edges, or moving
parts. Replace damaged Power Cords immediately. Damaged Power Cords
increase the risk of electric shock.
Personal Safety
8. Stay alert. Watch what you are doing, and use common sense when operating
this product.
9. Avoid accidental starting. Be sure the Fan Switch is off before plugging in.
Tool Use and Care
10. Do not use this appliance if any switch or thermostat does not work properly.
11. Disconnect the Power Cord Plug from the power source before making any
adjustments to the appliance. Such preventive safety measures reduce the risk of
starting the appliance accidentally.
Service
12. Appliance service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel could result in a risk of
injury.
For technical questions, please call 1-800-444-3353
Page 3SKU 91797
13. When servicing an appliance, use only identical replacement parts. Follow
instructions in the “Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions may
create a risk of electric shock or injury.
SPECIFIC SAFETY RULES FOR THIS PRODUCT
1. Maintain labels and nameplates on the Fireplace Heater. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
2. Avoid fires and explosions. Never place the Fireplace Heater near room curtains
or other flammable materials. The floor on which the Fireplace Heater sits must be
nonflammable and free of debris. Never use near flammable vapors or liquids.
3. Maintain a safe working environment. Keep the work area well lit. Make sure there
is adequate surrounding space. Always keep the work area free of obstructions,
grease, oil, trash, and other debris. Do not use this product in areas near flammable
chemicals, dusts, and vapors. Do not use this product in a damp or wet location.
4. Avoid unintentional starting. Make sure you are prepared to begin work before
turning on the Fireplace Heater.
5. Do not force the Fireplace Heater. This product will do the work better and safer at
the capacity for which it was designed.
6. Always unplug the Fireplace Heater from its electrical outlet before performing
and inspection, maintenance, or cleaning procedures.
7. Never leave the Fireplace Heater unattended while running. Turn power off if you
have to leave the room.
8. Use proper extension cord. If an extension cord is used, use the proper type as
listed in the table on page 7. Keep extension cord off the ground and away from water.
9. Connect to a GFCI outlet. Always connect the Line Cord to a Ground Fault Circuit
Interrupter (GFCI) protected electrical outlet.
GROUNDING
Note: This product comes with a two-prong, polarized plug.
WARNING!
Improperly connecting the grounding wire can result in the risk of electric
shock. Check with a qualified electrician if you are in doubt as to whether
the outlet is properly grounded. Do not modify the power cord plug provided
with the tool or product. Never remove the grounding prong from the plug.
Do not use the tool if the power cord or plug is damaged. If damaged, have
it repaired by a service facility before use. If the plug will not fit the outlet,
have a proper outlet installed by a qualified electrician.
For technical questions, please call 1-800-444-3353
Page 4SKU 91797
Loading...