Central Machinery 63995 Owner's Manual & Safety Instructions
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 18k
!"#"$%&'(%)*+#"$*%,$-%.$$/-00)))1.,(+&(2(*"3.$14&5
65,"7%&'(%$*4.8"4,7%#'//&($%,$-%/(&9'4$#'//&($:.,(+&(2(*"3.$14&5
!"#"$%&'(%)*+#"$*%,$-%.$$/-00)))1.,(+&(2(*"3.$14&5
65,"7%&'(%$*4.8"4,7%#'//&($%,$-%/(&9'4$#'//&($:.,(+&(2(*"3.$14&5
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2018 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
To ol s re q u ir e d fo r as s e mb l y a n d s e r vi c e m a y n o t b e in c l ud e d .
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
G,+7*%&2%O&8$*8$#
EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ
Safety ......................................................... 2
Specifications ............................................. 3
Assembly .................................................... 5
Operation .................................................... 8
QFKMLMR%EHNSITE%FMU%U6;LMLGLIME
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Maintenance ............................................... 9
Parts List and Assembly Diagram.............. 11
Warranty .................................................... 12
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
L5/&($,8$%E,2*$V%L82&(5,$"&8
1. Keep hands away from arbor plates
and press pin during use.
2. Do not move workpiece while compressed.
3. Release load before service or maintenance.
4. Keep area under arbor plates clear. If arbor
plates rest on obstruction (i.e. bolt, debris,
etc.), it creates an uneven press, causing
excess stress and possible breakage.
5. Avoid off-center loads. Do not operate if
workpiece tilts or binds during compression.
6. STOP and release compression if you suspect
imminent structural failure. If safe, inspect
thoroughly and reposition before proceeding.
7. Do not compress springs or other elastic
objects. They could disengage hazardously.
8. Wear ANSI-approved safety goggles,
heavy-duty work gloves, and steel-toe
work boots during set up and/or use.
9. Keep bystanders out of work area.
10. Do not stand directly in front of the
press when loaded. Do not leave the
press unattended when loaded.
11. Do not operate the hydraulic ram
beyond rated capacity.
12. Inspect before every use; do not use
if parts are loose or damaged.
13. Ram service must be performed only by
qualified repair personnel. Service or
maintenance performed by unqualified
personnel could result in a risk of injury.
14. When servicing a ram, use only identical
replacement parts – refer to attached, productspecific parts list and diagram. Follow instructions
in the
“User - Maintenance Instructions” section
of this manual. Use of unauthorized
parts or failure to follow maintenance
instructions may create a risk of injury.
Page 2 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 63995
15. Only use with accessories rated to handle the
forces exerted by this tool during operation. Other
accessories not designed for the forces generated
may break and forcefully launch pieces.
19. Maintain labels and nameplates on the
Shop Press. These carry important safety
information. If unreadable or missing, contact
Harbor Freight Tools for a replacement.
16. Use only with ram included with this press.
17. Industrial applications must follow
OSHA requirements.
18. This product is not a toy. Keep it
out of reach of children.
%EF!6%GW6E6%LMEGKPOGLIME1
E/*4"2"4,$"&8#
Maximum Capacity
Working Distance 2" - 4"
Press Pin Diameter Ø5/8"
20. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
6 Tons
(12,000 lb)
EF;6GHIJ6KFGLIMNFLMG6MFMO6 E6GPJ
Page 3;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 63995
E*$'/%?%S*2&(*%P#*
M&$*- For additional information regarding the parts listed in the following pages,
refer to the Parts List and Assembly Diagram near the end of this manual.
EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ
O&5/&8*8$#%,89%O&8$(&7#
K,5%
W,897*
J"#$&8
K,5
;"77%J7'3
X&8%+,4YZ
J(*##%
F/(&8
K*7*,#*%
!,7[*
J(*##%
J"8
F(+&(%
J7,$*#
J(*##%F/(&8%
E'//&($%J"8#
;"3'(*%F
Page 4 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 63995
Loading...