Central Machinery 62210 Owner's Manual
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
REV 14j
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
No portion of this manual or any artwork contained herein may be reproduced in
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Copyright© 2005 by Harbor Freight Tools®. All rights reserved.
any shape or form without the express written consent of Harbor Freight Tools.
Item 62210 For technical questions, please call 1-888-866-5797. Page 1
Tools required for assembly and service may not be included.
Email our technical support at: productsupport@harborfreight.com
Visit our website at: http://www.harborfreight.com
ITEM 62210
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
READ AND SAVE THESE INSTRUCTIONS.
RULES FOR SAFE OPERATION
1. WARNING! To reduce the risk of
fire or electric shock, do not use
this Fan with any solid-state speed
control device.
2. This appliance is for use on a
nominal 120-V circuit and has
a grounding attachment plug.
Make sure that the appliance is
connected to an outlet having the
same configuration as the plug.
No adaptor should be used with
this appliance.
3. Do not leave Fan running
while unattended.
4. Do not operate any fan with a
damaged cord or plug. Discard fan
or return to an authorized service
facility for examination and/or
repair.
5. Do not run cord under carpeting.
Do not cover cord with throw rugs,
runners, or similar coverings.
Arrange cord away from traffic area
and where it will not be tripped
over.
6. Never insert fingers, pencils, or any
other object through Front or Rear
Blade Guards.
7. Disconnect Fan when moving it
from one location to another.
8. Disconnect Fan before removing
grills for cleaning.
9. Be sure fan is on a stable
surface when operating to avoid
overturning.
10. DO NOT use fan in window.
Rain may create electrical hazard.
11. Complete the assembly of the fan
before switching on the fan.
12. Maintain labels and nameplates on
the fan.
If unreadable or missing, contact
Harbor Freight Tools for a
replacement.
13. Use only in dry areas.
Do not use in bathrooms, laundry
area, near sinks or other sources of
water.
14. This fan is not a toy.
Keep it out of reach of children.
15. WARNING: The cord of this product
contains lead and/or di (2-ethylhexyl)
phthalate (DEHP), chemicals known
to the State of California to cause
cancer, and birth defects or other
reproductive harm. Wash hands after
handling. (California Health & Safety Code § 25249.5, et seq.)
16. People with pacemakers should
consult their physician(s) before
use. Electromagnetic fields in close
proximity to heart pacemaker could
cause pacemaker interference or
pacemaker failure.
17. The warnings, precautions, and
instructions discussed in this
instruction manual cannot cover all
conditions and situations that may
occur. It must be understood by
operator that common sense and
caution are factors which cannot
be built into this fan, but must be
supplied by operator.
Item 62210 For technical questions, please call 1-888-866-5797. Page 2
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
Specifications
Fan Blade 24”
Fan Guard
Diameter
Motor 120 VAC, Single Phase Con-
Amperage High -1.85, Low - 1.45
24-1/4”
tinuous Duty
E197533
HOUSEHOLD USE ONLY
Item 62210 For technical questions, please call 1-888-866-5797. Page 3
Loading...