Central Machinery 61729 Owner's Manual

Page 2 For technical questions, please call 1-888-866-5797. Item 61729

SAFETY OPERATION MAINTENANCESETUP

READ AND SAVE THESE INSTRUCTIONS.

RULES FOR SAFE OPERATION

1. WARNING! To reduce the risk of fire or

electric shock, do not use this blower with
any solid-state speed control device.

2. This appliance has a polarized plug

(one blade is wider than the other).
To reduce the risk of electric shock,
this plug is intended to fit into a polarized
outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug.
If it still does not fit, contact a
qualified electrician. Do not change
the plug in any way. Do not attempt
to defeat this safety feature.

3. Do not leave blower running

while unattended.

4. Do not operate any blower with a

damaged cord or plug. Discard blower
or return to an authorized service
facility for examination and/or repair.

5. Do not run cord under carpeting.

Do not cover cord with throw rugs,
runners, or similar coverings.
Arrange cord away from traffic area
and where it will not be tripped over.

6. Never insert fingers, pencils, or

any other object through Front
or Rear Blade Guards.

7. Disconnect blower when moving

it from one location to another.

8. Disconnect blower before

removing grills for cleaning.

9. Be sure blower is on a stable surface

when operating to avoid overturning.

10. DO NOT use blower in window.

Rain may create electrical hazard.

11. Maintain labels and nameplates
on the blower.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.

12. Use only in dry areas.
Do not use in bathrooms, laundry area,
near sinks or other sources of water.

13. This blower is not a toy.
Keep it out of reach of children.

14. WARNING: Handling cord on this blower
will expose you to lead, a chemical known
to the State of California to cause cancer,
and birth defects or other reproductive harm.
Wash hands after handling.
(California Health & Safety Code

§ 25249.5, et seq.)

15. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all conditions and situations that may
occur. It must be understood by operator
that common sense and caution are factors
which cannot be built into this blower,
but must be supplied by operator.

Page 3For technical questions, please call 1-888-866-5797.Item 61729

SAFETYOPERATIONMAINTENANCE SETUP

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol. It is used to alert you to

potential personal injury hazards. Obey all safety messages

that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Addresses practices not related to personal injury.

Specifications

Electrical Rating 120VAC / 60Hz / 1A

Maximum Air Flow 300 CFM

3092372