MA0312-EA
Operation Guide PDM-10B/20B
PDM-10B
PDM-10B |
PDM-20B |
1RESET button |
5RESET button |
Press to reset the number of steps to “0” . |
Press to reset the number of steps to “0” . |
Pressing this button while the display is blank turns |
6SET button |
on the display. |
7MODE button |
Holding down this button turns off power. |
|
2Front cover |
8Front panel |
3Back cover |
9Back panel |
4Clip |
0Clip |
|
ACursor |
Holding the front and back panels of the pedometer, release the catch on the top of the panels and then open them as shown in the illustration.
PDM-20B
• Clip the pedometer securely to your belt or the waistband of your slacks, skirt, training pants, etc.
• Take care that you hook the clip so your belt or waistband enters the clip as far as it will go. Improper attachment of the pedometer or wearing it an angle can cause mistakes in the number of step count.
• Take care that you do not accidentally press the RESET button while you are attaching or removing the pedometer. Accidentally pressing the RESET button will reset the number of steps to “0”.
• Make sure that the two panels of the pedometer are securely closed while you are using it (PDM-20B).
•A sticker is affixed to the glass of the pedometer when you purchase it. Be sure to remove the sticker before using the pedometer.
•Depending on the model of your pedometer, its configuration may differ somewhat from that shown in the illustration.
1