Casio MTP-1372D-1BVEF, MTP-1377D-1AVEF Instruction manual

0 (0)
Casio MTP-1372D-1BVEF, MTP-1377D-1AVEF Instruction manual

MA1211-EA

Operation Guide ANALOG(MAI)

• Your watch may differ somewhat from the one shown in the illustration.

Notes

• Some water resistant models are equipped with a screw lock crown.

• With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns.

• Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting.

[Module 5284]

To set the time

1.

When the second hand is at 12 o’clock, pull out the

Crown

 

crown to stop it.

 

2.

Set the hands by rotating the crown. Move the

 

 

minute hand four or five minutes past the setting

 

 

you want, and then back them up to the setting.

 

3.

Push the crown back in on a time signal to resume

 

 

timekeeping.

 

 

 

[Modules 5128, 5180, 5199, 5206, 5207, 5218, 5250, 5340, 5341, 5342, and 5343]

To set the time

1.When the second hand is at 12 o’clock, pull out the crown to the second click to stop it.

2.Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting.

3.Push the crown back in on a time signal to resume timekeeping.

To set the day

Avoid setting the day between 9:00 p.m. and 1:00 a.m. The day may not change in the following day if you do.

1.Pull out the crown to the first click.

2.Set the day by rotating the crown.

3.Push the crown back in to its normal position.

First click (Day setting)

Crown

(Normal position)

Second click (Time setting)

[Modules 5125, 5167, 5223, 5237, 5249, and 5339]

To set the time

1.When the second hand is at 12 o’clock, pull out the crown to the second click to stop it.

2.Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting.

3.Push the crown back in on a time signal to resume timekeeping.

To set the day and day of the week

First click

(Day, day of week setting)

Crown

(Normal position)

• Avoid setting the day and day of the week between 9:00 p.m. and 5:00 a.m. The day and day of the week may not change in the following day if you do.

1.Pull out the crown to the first click.

2.Set the day by rotating the crown counterclockwise.

3.Set the day of the week by rotating the crown clockwise.

4.Push the crown back in to its normal position.

Second click (Time setting)

• For watch with the elapsed time bezel

Rotate the elapsed time bezel to align the mark with the minute hand.

After certain amount of time elapsed, read the graduation on the elapsed time bezel which the minute hand points to.

The elapsed time is indicated.

 

 

 

Elapsed time bezel

 

 

 

 

Specifications

 

 

Accuracy at normal

 

 

Module No.

temperature

Battery type

Battery life

 

(per month)

 

 

 

 

 

 

5125/5128/5206/

±20 seconds

SR626SW

Approx. 3 years

5207/5237/5249

 

 

 

5167

±20 seconds

SR920SW

Approx. 5 years

5180/5199/5223/

±20 seconds

SR621SW

Approx. 3 years

5342/5343

 

 

 

5218/5250

±20 seconds

SR616SW

Approx. 2 years

5284

±20 seconds

SR521SW

Approx. 2 years

5339/5340/5341

±20 seconds

SR920SW

Approx. 3 years

1

Loading...