Casio DT-X10M30U, DT-X10M30URC2, DT-5022CHG, DT-167CHGE, DT-160IOE User Manual

0 (0)

Handheld Terminal

User’s Guide

Be sure to read “Safety Precautions” inside this guide before trying to use your Handheld Terminal. After reading this guide, keep it in a safe place for future reference.

PN410369-005

E

Series

Fn

 

 

BL

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

BS

 

Alpha

DT-X10_E_Hyo_1_4.p65

3

05.4.1, 11:03 AM

This Product includes Extended Systems Inc.'s XTNDConnect Blue SDK for Windows® CE operating system or its derivative work, which use is governed by a license granted by Extended Systems Inc.

BLUETOOTH is a trademark owned by Bluetooth SIG, Inc. and licensed to CASIO COMPUTER CO., LTD.

Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Compact Flash is a trademark of SanDisk Corporation in the United States.

Datalight is a registered trademark of Datalight, Inc.

FlashFXTM is a trademark of Datalight, Inc.

Copyright 1993-2000 Datalight, Inc., All Rights Reserved. U.S. Patent Office 5,860,082

Other company names and product names used in this guide are trademarks or registered trademarks of their respective owners.

DT-X10_E_P00.p65

2

05.8.11, 10:45 AM

Safety Precautions

Congratulations upon your selection of this CASIO product. Be sure to read the following Safety Precautions before trying to use it for the first time.

Markings and Symbols

The following are the meanings of the markings and symbols used in these Safety Precautions.

Danger

This symbol indicates information that, if ignored or applied

incorrectly, creates the danger of death or serious personal injury.

 

This symbol indicates information that, if ignored or applied Warning incorrectly, creates the possibility of death or serious personal

injury.

This symbol indicates information that, if ignored or applied Caution incorrectly, creates the possibility of personal injury or property

damage.

A diagonal line indicates something you should not do. The symbol shown here indicates you should not try to take the unit apart.

A black circle indicates something you should do. The symbol shown here indicates you should unplug the unit from the wall outlet.

Precautions During Use

Warning

Disassembly and Modification

Never try to disassemble or modify the Handheld Terminal and its options in any way. High voltage inside creates the danger of electric shock.

Abnormal Conditions

Should the Handheld Terminal and its options become hot or start to emit smoke or a strange odor, immediately turn off the power, and contact your original vendor or an authorized CASIO service provider. Continued use creates the danger of fire and electric shock.

E-1

DT-X10_E_P01_07.p65

1

05.4.1, 11:03 AM

Warning

Foreign Objects

Should any foreign matter get into the Handheld Terminal and its options, immediately turn off the power and contact your original vendor or an authorized CASIO service provider. Continued use creates the danger of fire and electric shock.

Dropping and Damage

Should you drop the Handheld Terminal and its options and damage them, immediately turn off the power and contact your original vendor or an authorized CASIO service provider. Continued use creates the danger of fire and electric shock.

Moisture

Though your Handheld Terminal is water splash-resistant, its Bridge Satellite Cradle and other optional peripherals are not. Keep loose metal objects and containers filled with liquids away from your Handheld Terminal and the optional peripherals.

Also, never connect or disconnect peripherals to the Handheld Terminal while they are wet. Water getting into the Handheld Terminal or its peripherals creates the danger of fire and electric shock.

Laser Light

This product scans bar codes using laser light. Never look directly into the laser light or shine the laser light into the eyes.

Warning

Interference with the Operation of Other Equipment

(Using Wireless Data Communication)

Keep your Handheld Terminal at least 22 centimeters (85/8") away from anyone wearing a pacemaker. Radio waves emitted by the Handheld Terminal can affect the operation of a pacemaker.

E-2

DT-X10_E_P01_07.p65

2

05.4.1, 11:03 AM

Caution

Foreign Objects

Take care to ensure that metals or combustible objects are not inserted into the openings of the Handheld Terminal and its options. Such the objects inside of the Handheld Terminal and its options create the danger of fire and electric shock.

Location

Do not locate the Handheld Terminal and its options on a surface that is unstable or uneven. Doing so creates the danger of the Handheld Terminal falling, which can cause personal injury.

Do not locate the Handheld Terminal and its options in an area subject to large amounts of humidity or dust. Doing so creates the danger of fire and electric shock.

Do not leave the Handheld Terminal and its options for a long period in a car parked in direct sunlight.

Heavy Objects

Never place heavy objects on top of the Handheld Terminal and its options. Doing so creates the danger of loss of balance and the objects falling, which can cause personal injury.

LCD Screen

Never apply strong pressure to the screen or subject it to strong impact. Doing so can crack the screen or LCD panel glass, which can cause the danger of personal injury.

Should the LCD panel glass break, never touch the liquid inside. Doing so can cause skin inflammation.

Should liquid from the LCD panel accidentally get into your mouth, immediately wash your mouth with water and then consult a physician.

Should liquid from the LCD panel accidentally get into your eyes or onto your skin, immediately rinse for at least 15 minutes with clean tap water and then consult a physician.

E-3

DT-X10_E_P01_07.p65

3

05.4.1, 11:03 AM

Optional Lithium-ion Battery Pack

Danger

Never allow the battery pack to become wet. Water can create the danger of battery pack heat emission, explosion, and fire.

Never use or leave the battery pack next to open flame, near a stove, or any other area exposed to high heat. Doing so creates the danger of battery pack heat emission, explosion, and fire.

Never use the battery pack with any device other than the Handheld Terminal. Doing so can create the danger of battery pack heat emission, explosion, and fire.

Note that the battery pack’s positive (+) and negative (–) polarities must be oriented correctly when it is loaded into battery charger or the Handheld Terminal. Connecting the battery pack with its polarities reversed creates the danger of battery pack fluid leakage, heat emission, explosion, and fire.

Never dispose of the battery pack by incinerating it or otherwise expose it to heat. Doing so creates the danger of battery pack heat emission, explosion, and fire.

Never allow the positive (+) and negative (–) terminals of the battery pack to become connected (shorted) by metal. Doing so creates the danger of battery pack heat emission, explosion, and fire.

Never transport or store the battery pack together with a necklace, hair pins or other metal objects. Doing so can short battery pack terminals, creating the danger of battery pack heat emission, explosion, and fire. Be sure to place the battery pack in its case whenever transporting or storing it.

Never throw the battery pack or otherwise subject it to strong impact. Doing so creates the danger of battery pack heat emission, explosion, and fire.

Never pierce the battery pack with nails, hit it with a hammer, or step on it. Doing so can create the danger of battery pack heat emission, explosion, and fire.

Never try to take apart the battery pack or modify it in any way. Doing so creates the danger of battery pack heat emission, explosion, and fire.

Use only the specified battery charger to charge the battery pack. Use of

other type of battery charger creates the danger of battery pack heat emission, explosion, and fire.

E-4

DT-X10_E_P01_07.p65

4

05.4.1, 11:03 AM

Warning

Never place the battery pack in a microwave oven or any other high-voltage device. Doing so creates the danger of battery pack heat emission, explosion, and fire.

Should the battery pack emit a strange odor or heat, change color or shape, or exhibit any other abnormal behavior, immediately stop using it. Continued use creates the danger of battery pack heat emission, explosion, and fire.

If the amount of time period the battery pack can serve becomes

considerably short, stop using it. It may indicate the possibility of a malfunction in the battery pack. Continued charging the battery pack creates the danger of heat emission, explosion, and fire.

If the battery pack does not achieve full charge after the normal charging time has passed, stop charging it. Continued charging creates the danger of battery pack heat emission, explosion, and fire.

Should the battery pack start to leak or emit a strange odor, immediately move it away from any nearby flame. Leaking battery fluid is combustible, and exposure to flame creates the danger of explosion and fire.

Should fluid from the battery pack accidentally get into your eyes, do not rub them. Immediately rinse your eyes with clean tap water and then consult a physician immediately.

Caution

Never use or leave the battery pack in an area exposed to direct sunlight, in a car parked in direct sunlight, or any other very hot area. Doing so creates the danger of heat emission and fire, as well as deterioration of battery pack performance and shortening of its service life.

Do not use the battery pack in areas where static electricity is being generated. Doing so creates the danger of battery pack heat emission, explosion, and fire.

Danger of explosion if the battery pack is incorrectly replaced.

Replace only with same or equivalent type recommended by CASIO. Dispose of used batteries according to the CASIO instruction.

Should fluid from the battery pack accidentally get onto clothing or your skin, immediately rinse it off with clean tap water. Prolonged contact with battery pack fluid can cause skin irritation.

Keep the battery pack out of the reach of small children. Do not let small children remove the battery pack from battery charger or the Handheld Terminal while it is powered on.

E-5

DT-X10_E_P01_07.p65

5

05.5.17, 6:39 PM

AC Power Supply

Warning

Do not use the Handheld Terminal at a voltage other than the specified voltage. Also, do not connect the Handheld Terminal to a multi-plug power strip. Doing so creates the danger of fire and electric shock.

Avoid conditions that can cause damage or breaks in the power cord. Do not place heavy objects on the power cord and keep it away from sources of heat. Any of these conditions can damage the power cord, creating the danger of fire and electric shock.

Never modify, sharply bend, twist, or pull on the power cord. Doing so creates the danger of fire and electric shock.

When using the battery charger and Bridge Satellite Cradle, be sure to use

the respective AC adaptors (sold separately). Use of other AC adaptor model creates the danger of fire and electric shock.

Should the power cord become severely damaged (to the point that wires are exposed or broken), contact your original vendor or an authorized CASIO service provider about repair or replacement. Use of a damaged electrical cord creates the danger of fire and electric shock.

Caution

Keep the power cord away from stoves and other sources of extreme heat. Heat can melt the covering of the power cord and create the danger of fire and electric shock.

Never pull on the power cord when unplugging it. Doing so can damage the cord and create the danger of fire and electric shock. (Always hold the plug when unplugging it from the wall outlet.)

Never touch the plug while your hands are wet. Doing so can create the danger of electric shock.

Be sure to unplug the power cord from the wall outlet before moving the battery charger and Bridge Satellite Cradle. Failure to do so can result in damage to the power cord caused by pulling it, which creates the danger of fire and electric shock.

Be sure to unplug the power cord from the wall outlet before cleaning the battery charger and Bridge Satellite Cradle.

Be sure to turn the power off and unplug the power cord after use.

Unplug the power cord from the wall outlet whenever leaving the battery charger and Bridge Satellite Cradle unattended for a long period.

E-6

DT-X10_E_P01_07.p65

6

05.4.1, 11:03 AM

AC Adaptor

Caution

The housing of the AC adaptor can become warm during normal use.

Take normal precautions against electric shock.

At least once a year, unplug the AC adaptor from the wall outlet and clean any dust that builds up between the prongs of the plug.

Dust built up between the prongs can lead to the danger of fire.

Backup Copies of All Important Data

Caution

Note that CASIO Computer Co., Ltd. shall not be held liable to you or any third party for any damages or loss caused by deletion or corruption of data due to use of the Handheld Terminal, malfunction or repair of the Handheld Terminal or its peripherals, or due to the batteries going dead.

The Handheld Terminal employs electronic memory to store data, which means that memory contents can be corrupted or deleted if power is interrupted due to the batteries going dead or incorrect battery replacement procedures. Data cannot be recovered once it is lost or corrupted. Be sure to make backup copies of all important data. One way to do this is to use the separately sold Bridge Satellite Cradle to transfer data to a computer.

E-7

DT-X10_E_P01_07.p65

7

05.4.1, 11:03 AM

Operating Precautions

Your Handheld Terminal and its options are precision digital instruments. Improper operation or rough handling can cause problems with data storage and other problems. Note and observe the following precautions to ensure proper operation.

Do not continue operating the Handheld Terminal when battery power is low.

Doing so can cause data to be lost. When the battery goes low, charge it as soon as possible.

Do not leave dead batteries in the Handheld Terminal for a long period.

Dead batteries can leak, leading to malfunction and damage to the Handheld Terminal.

Use the Handheld Terminal and its options only within the specified temperature range.

Use outside of the specified temperature range creates the risk of malfunction.

Avoid using the Handheld Terminal and its options in areas subject to the following conditions.

The following conditions create the risk of damage to the Handheld Terminal.

Large amounts of static electricity

Extreme heat or extreme cold

High humidity

Sudden temperature extremes

Large amounts of dust

Use only the special stylus that comes with the Handheld Terminal to operate its touch screen and reset button.

Do not use any tool other than the special stylus to operate the touch screen. Other tools can scratch the touch screen and lead to malfunction.

Never use thinner, benzene, cosmetic cleaning fluids, or other volatile agents to clean the Handheld Terminal.

To clean the Handheld Terminal, wipe it with a dry cloth, or a cloth moistened in a weak solution of water and a mild neutral detergent. Wring all excess moisture from the cloth before wiping.

E-8

DT-X10_E_P08_11.p65

8

05.4.1, 11:03 AM

Important

The contents of this guide are subject to change without notice.

Note that CASIO COMPUTER CO., LTD. shall not be held liable to you or any third parties for any losses or damages arising from the use of this guide.

This guide does not include any information about programming and download procedures. See the applicable separate documentation for information about the procedures.

Warranty and After Service

Should this product ever malfunction, contact your original retailer providing information about the product name, the date you purchased it, and details about the problem.

This mark applies in EU countries only.

E-9

DT-X10_E_P08_11.p65

9

05.4.1, 11:03 AM

GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not applicable to other areas).

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Proper connectors must be used for connection to host computer and/or peripherals in order to meet FCC emission limits.

 

Peripherals and Cables

 

Battery Pack (DT-5023BAT)

 

Large-capacity Battery Pack (DT-5025LBAT)

 

AC Adaptor (AD-S42120A)

 

Communication Card Cover (DT-892TCV)

 

Communication Card Cover (Large size) (DT-893LTCV)

 

CF Card Extension Unit (DT-894CFU)

 

Cables (DT887AXA, DT888RSC, DT-380USB, SB-201)

 

 

 

 

 

Declaration of Conformity

Model Numbers:

DT-X10M30U, DT-X10M30URC2, DT-160IOE, DT-167CHGE, DT-169CHGE,

 

DT-5022CHG

Trade Name:

CASIO

Responsible party:

CASIO, INC.

Address:

570 Mt. Pleasant Avenue, Dover, New Jersey 07801

Telephone number:

973-361-5400

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The equipment generates and radiates radio-frequency energy.

SAR (Specific Absorption Rate) for this device was measured in accordance with FCC OET Bulletin 65, Supplement C and guidelines established in IEEE C95.1-1991.

We, the undersigned.

Company

CASIO Europe GmbH

Address, City

Bornbarch 10, D-22848 Norderstedt

Country

Germany

Phone number

+49(0)40-528-65-0

Fax number

+49(0)40-528-65-424

certify and declare under our sole responsibility that the following equipments:

E-10

DT-X10_E_P08_11.p65

10

05.4.1, 11:03 AM

Product description / Intended use

 

EU/EFTA member states intended for use

EU: Austria, Belgium, Denmark, Finland, France,

 

Germany, Greece, Ireland, Italy, Luxembourg, The

 

Netherlands, Portugal, Spain, Sweden, United

 

Kingdom, Czech Republic, Hungary, Poland, Slovenia,

 

Slovakia, Estonia, Latvia, Lithuania, Cyprus, Malta

 

EFTA: Switzerland, Iceland, Lichtenstein, Norway

Member states with restrictive use

NONE

Manufacturer

CASIO COMPUTER CO., LTD.

Brand

CASIO

Type

DT-X10M30E, DT-X10M30U, DT-X10M30RC2

 

DT-X10M10E, DT-X10M10RC2

are tested and found to conform with the essential requirements for protection of health and the safety of the user and any other persons and Electromagnetic Compatibility, as included in following standards:

Standard

lssue date

EN60950

1992

A1,

1993

A2,

1993

A3,

1995

A4,

1997

A11,

1997

EN301 489-1,

2001-09

EN301 489-17

2000

and are tested and found to conform with the essential radio test suites so that they effectively use the frequency spectrum allocated to terrestrial/space radio communication and orbital resources so to as to avoid harmful interference, as included in following standards:

Standard

lssue date

EN300-328-1

2000-07

EN300-328-2

2001-12

and therefore comply with the essential requirements and provisions of the Directive 1999/5/EC of the European Parliament and of the council of March 9, 1999 on Radio equipment and Telecommunications Terminal Equipment and the mutual recognition of their conformity and with the provisions of Annex III (Conformity Assessment procedure referred to in article 10).

The technical documentation as required by the Conformity Assessment procedure is kept at the following address:

Company

CASIO Europe GmbH

Address, City

Bornbarch 10, D-22848 Norderstedt

Country

Germany

Phone number

+49(0)40-528-65-0

Fax number

+49(0)40-528-65-424

Products are for distribution within all member states of the EU.

France limited to 2446.5-2483.5 Mhz Indoor use.

Belgium limited to 2400-2483.5 Mhz Indoor, 2460-2483.5 Mhz Outdoor use.

The Netherlands limited to 2400-2483.5 Mhz Indoor use with no license, 2451-2471.0 Mhz Outdoor use with license.

E-11

DT-X10_E_P08_11.p65

11

2005.4.15, 11:40 AM

Contents

Safety Precautions .........................................................................................

E-1

Operating Precautions ...................................................................................

E-8

Important .........................................................................................................

E-9

Before Getting Started .................................................................................

E-14

Handheld Terminal System Configuration .................................................

E-16

Options .............................................................................................................

E-16

General Guide ...............................................................................................

E-19

Replacing the Battery ..................................................................................

E-21

Replacing the Battery Pack ...............................................................................

E-21

Attaching the Wrist Strap ............................................................................

E-24

Configuring Handheld Terminal Settings ...................................................

E-25

Calibrating Touch Screen Alignment ................................................................

E-25

Adjusting Display Contrast ..............................................................................

E-26

Adjusting Display Brightness ...........................................................................

E-26

Display Auto Dimmer .......................................................................................

E-26

Using the C-MOS Imager (C-MOS Imager models only) ...........................

E-27

About the Class 1 LED Label ...........................................................................

E-28

Using the Laser Scanner (Laser Scanner models only) ...........................

E-29

Warning Label ..................................................................................................

E-30

Bar Code Scanning Position .............................................................................

E-30

Performing Data Communication ...............................................................

E-31

IR Data Communication ...................................................................................

E-31

Bluetooth® Communication ..............................................................................

E-32

Resetting the Handheld Terminal ...............................................................

E-33

Performing a Full Reset (Initialization) ............................................................

E-34

DT-X10 Specifications ..................................................................................

E-35

E-12

DT-X10_E_P12_13.p65

12

05.8.11, 10:46 AM

Using the Bridge Satellite Cradle (DT-160IOE) ..........................................

E-37

General Guide ...................................................................................................

E-37

Option ...............................................................................................................

E-37

Connecting the AC Adaptor and Connecting to Computer ..............................

E-39

Configuring DIP Switch Settings .....................................................................

E-41

Using Wall Mount Unit ....................................................................................

E-42

Connecting Multiple Bridge Satellite Cradles (DT-160IOE) ...........................

E-44

Bridge Satellite Cradle (DT-160IOE) Specifications .......................................

E-45

Using the Cradle-type Battery Charger ......................................................

E-46

General Guide ...................................................................................................

E-46

Option ...............................................................................................................

E-46

Connecting the AC Adaptor for Cradle-type Battery Charger .........................

E-48

Using Wall Mount Unit ....................................................................................

E-49

Cradle-type Battery Charger (DT-169CHGE) Specifications ..........................

E-49

Using the Dual Battery Charger ..................................................................

E-50

General Guide ...................................................................................................

E-50

Option ...............................................................................................................

E-50

Charging a Battery Pack ...................................................................................

E-52

Connecting Multiple Dual Battery Chargers ....................................................

E-53

Dual Battery Charger (DT-5022CHG) Specifications ......................................

E-54

Using PC Card (DT-X10M30E / M30U / M10E) ............................................

E-55

Affixing a PC Card Remover ...........................................................................

E-55

To load a PC card ..............................................................................................

E-55

Using CF Card Extension Unit ....................................................................

E-57

Bundled Item ....................................................................................................

E-57

Attaching the CF Card Extension Unit .............................................................

E-57

Loading a CF Card ...........................................................................................

E-58

CF Card Extension Unit (DT-894CFU) Specifications ....................................

E-58

Using Rechargeable Battery Pack ..............................................................

E-59

Battery Pack Specifications ..............................................................................

E-59

Large-capacity Battery Pack Specifications .....................................................

E-59

E-13

DT-X10_E_P12_13.p65

13

05.4.1, 11:04 AM

Before Getting Started

Be sure to perform the following steps before trying to use the Handheld Terminal for the first time.

1. When unpacking, make sure that everything is included.

Open the box and make sure that all the items shown here are included.

Handheld Terminal

Stylus

Fn

 

 

BL

ABC

DEF

GHI

JKL

MNO

PQRS TUV WXYZ

BS Alpha

Large-capacity battery pack

Wrist Strap

Cover

 

PC Card Remover (2 pcs)

User's Guide (this manual)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.Charge the battery pack.

Charge the separately available battery pack (DT-5023BAT or DT-5025LBAT). You can use the Dual Battery Charger, or the Cradle-type Battery Charger, or the Bridge Satellite Cradle to charge a battery pack.

For information using these options for charging, see pages 37, 46, and 50.

3.Load the battery pack into the Handheld Terminal.

1Slide the two battery pack lock switches at the right and left sides to the “FREE” position, and then remove the battery pack cover.

E-14

DT-X10_E_P14_36.p65

14

05.4.1, 11:04 AM

2Load a battery pack (DT-5023BAT) or a large-capacity battery pack (DT-5025LBAT). Take care that the battery pack is oriented correctly when you load it.

3Replace the rechargeable battery pack cover as shown in the diagram and then return the rechargeable battery pack cover switches (two places) to the "LOCK" positions. When loading a large-capacity rechargeable battery pack, mount the large-capacity rechargeable battery pack cover.

1

2 3

3

4.Hold down the power key for about one second to turn on the Handheld Terminal. Start up the application you want to run.

Fn

BL ABC DEF

Using the stylus

Tap: Lightly tap with the stylus once on the touch screen.

Tap and Hold: Hold the tip of the stylus on the touch screen without moving it. Drag: Hold the tip of the stylus on the touch screen as you drag from one location to another. This operation is the same as writing with a pencil on a piece of paper.

E-15

DT-X10_E_P14_36.p65

15

05.4.1, 11:04 AM

Casio DT-X10M30U, DT-X10M30URC2, DT-5022CHG, DT-167CHGE, DT-160IOE User Manual

Handheld Terminal System Configuration

DT-X10 Series

Fn

 

 

BL

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

BS

 

Alpha

Laser Scanner models

DT-X10M10E

DT-X10M10RC2

C-MOS Imager models

DT-X10M30E

DT-X10M30U*

DT-X10M30RC2

DT-X10M30URC2

*This model is available in the

USA and Canada

E-16

Options

Bridge Satellite Cradle

DT-160IOE

Required AC Adaptor

(AD-S42120A)

Cradle-type Battery Charger

DT-169CHGE

Required AC Adaptor

(AD-S42120A)

Wall Mount Unit

DT-891WH

Required

 

Screws

 

Required

 

Screws

DT-X10_E_P14_36.p65

16

05.8.11, 10:46 AM

 

Battery Pack

DT-5023BAT

DT-5025LBAT

(Battery Pack)

(Large-capacity Battery Pack)

Dual Battery Charger

DT-5022CHG

Required AC Adaptor (MPC-577ADP)

E-17

DT-X10_E_P14_36.p65

17

05.4.1, 11:04 AM

Loading...
+ 43 hidden pages