Home Standby - 16kW
Air-Cooled Gas Engine Generator Sets
Ultra Quiet Mode
Low Speed Exercise
59 dB(A) at 23 feet
INCLUDES:
• Automatic Transfer
Switch With Built-In 16-Circuit
Emergency Load Center
•Electronic Governor
•Pre-wired External Connection Box
•Flexible Fuel Line
•Composite Mounting Pad
•Pre-wired conduits
•Natural Gas or LP Gas Operation
•UL 2200 Listed to U.S. and Canadian Standards
Continuous Standby Power Rating — 16kW 60Hz
Models: ASPBS1CCA016 (Steel)
ASPBA1CCA016 (Aluminum)
FEATURES
INNOVATIVE DESIGN & PROTOTYPE TESTING are key components of CARRIER’S success in “IMPROVING POWER BY DESIGN.” But it doesn’t stop there. Total commitment to component testing, reliability testing, environmental testing, destruction and life testing, plus testing to applicable CSA, NEMA, EGSA, and other standards, allows you to choose CARRIER with the confidence that these systems will provide superior performance.
TEST CRITERIA:
>PROTOTYPE TESTED
>SYSTEM TORSIONAL TESTED
>NEMA MG1-22 EVALUATION
>MOTOR STARTING ABILITY
SOLID-STATE, FREQUENCY COMPENSATED VOLTAGE REGULATION.
This state-of-the-art power maximizing regulation system is standard
on all models. It provides optimized FAST RESPONSE to changing load conditions and MAXIMUM MOTOR STARTING CAPABILITY by electronically torque-matching the surge loads to the engine.
SINGLE SOURCE SERVICE RESPONSE from Carrier’s dealer network provides parts and service know-how for the entire unit, from the engine to the smallest electronic component. You are never on your own when you own a CARRIER SYSTEM.
CARRIER TRANSFER SWITCHES. Long life and reliability are synonymous with CARRIER. One reason for this confidence is that the CARRIER product line includes its own transfer systems and controls for total system compatibility.
HOME STANDBY SPECIFICATIONS |
Home Standby - 16kW |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•Durable OHVI Design |
Maximizes engine “breathing” for increased |
fuel efficiency. Cylinder walls run cooler, reducing |
|
|
|
|
oil consumption. Because heat is the primary cause of engine wear, the OHVI has a significantly |
||
|
|
|
longer life than competitive engines. |
|
|
ENGINE |
•”Spiny-lok” cast iron cylinder walls |
Rigid construction and added durability provide long engine life. |
|||
•Electronic ignition, spark advance and |
These features combine to assure smooth, quick starting every time. |
||||
|
|
||||
|
|
compression release |
|
|
|
|
|
•Full pressure lubrication system |
Superior lubrication to all vital bearings means better performance, less maintenance and significantly |
||
|
|
|
longer engine life. |
|
|
|
|
•Low oil pressure shutdown system |
Superior shutdown protection prevents catastrophic engine damage due to low oil. |
||
|
|
•High temperature shutdown |
Prevents damage due to overheating. |
|
|
GENERATOR |
•Revolving field |
Allows for smaller, light weight unit that operates 25% more efficiently than a revolving armature generator. |
|||
•Skewed stator |
Produces a smooth output waveform for compatibility with electronic equipment. |
||||
|
|
||||
|
|
•Displaced phase excitation |
Maximizes motor starting capability. Provides more surge capability than brushless generator designs. |
||
|
|
•Automatic voltage regulation |
Regulates the output voltage to ±2% prevents damaging voltage spikes. |
||
|
|
•UL 2200 Listed |
For your safety |
|
|
|
|
|
|
|
|
TRANSFER |
SWITCH |
•UL Listed |
For your safety |
|
|
|
|
•Fully Automatic |
Transfers your vital electrical loads to the energized source of power. |
||
|
|
•Remote Mounting |
Mounts near your existing distribution panel for simple, low cost installation. |
||
|
|
|
|
|
|
CONTROL |
•Manual/Auto/Off switch |
Selects the operating mode. |
|
||
•Utility voltage sensing |
Constantly monitors utility voltage, setpoints 60% dropout, 70% pick-up, of standard voltage. |
||||
|
|
||||
MICROPROCESSOR |
•Utility interrupt delay |
Prevents nuisance start-ups of the engine, set point approximately 10 seconds. |
|||
•Engine warm-up |
Ensures engine is ready to assume the load, setpoint approximately 10 seconds. |
||||
|
|
||||
|
|
•Engine cool-down |
Allows engine to cool prior to shutdown, setpoint approximately 1 minute. |
||
|
|
•Seven day exerciser |
Operates engine to prevent oil seal drying and damage between power outages. |
||
|
|
•Timed Trickle Battery charger |
Maintains battery amperage to insure starting. |
||
|
|
•Main Line Circuit Breaker |
Protects generator from overload. |
|
|
|
|
|
|
||
|
|
•Weather protective enclosure |
Ensures protection against mother nature. Hinged key locking roof panel for security. |
||
UNIT |
|
Lift-out front for easy access to all routine maintenance items. Electrostatically applied |
|||
|
textured epoxy paint for added durability. Aluminum enclosure available - (Model 05244) |
||||
|
|
|
|||
|
|
•Enclosed critical grade muffler |
Quiet, critical grade muffler is mounted inside the unit to prevent injuries. |
||
|
|
•Small, compact, attractive |
Makes for an easy, eye appealing installation. |
||
|
|
|
|
||
INSTALLATION |
SYSTEM |
•Pre-wired External Connection Box |
Easy Installation - Virtually all hardware included, plus step-by-step photographed Installation Guide. |
||
•1’ Flexible Fuel Line |
|
|
|||
|
|
|
|
||
|
|
•Composite Mounting Pad |
|
|
|
|
|
•Pre-wired conduits |
|
|
|
|
|
•UL Listed wire nuts |
|
|
|
|
|
|
|
|