L010124H31 - 1100
VENTILCONVETTORI |
FAN COIL UNITS |
SISTEMA AQUASMART |
AQUASMART SYSTEM |
mod. 42Y - 42GW |
mod. 42Y - 42GW |
Istruzioni di installazione |
Change over sensor |
sensore cambio stagionale |
installation instructions |
|
|
|
|
Mod. 42Y |
|
|
Mod. 42GW |
|
|
|
|
|
|
|
|
|
|
|
|
Entrata acqua |
|
|
|
Water inlet |
|
|
|
Uscita acqua |
|
|
|
Water outlet |
|
|
|
Rif. Q.tà Descrizione
1 Sensore cambio stagionale
1 Clip porta sonda
2 Fascette in nylon
1 Isolante adesivo
Il sensore cambio stagionale è elettricamente collegato all’interno del quadro elettrico dell’unità.
La sonda del sensore cambio stagionale, in fase di installazione è da posizionare sulla tubazione di ingresso acqua per versione 2 tubi o ingresso acqua calda per versione 4 tubi, utilizzando la clip porta sonda e relative fascette . Avvolgere il tutto con l’isolante adesivo .
Nota:
Nelle unità con valvola, accertarsi che il sensore sia posizionato sul circuito primario (lato impianto a monte della valvola).
Ref. Q.ty Description
1 Change over sensor
1 Sensor holder clip
2 Nylon clamps
1 Adhesive insulation
The change over sensor is electrically connected in the unit electric box.
During installation, the change over sensor has to be located on the water inlet tube for 2 pipe version or hot water inlet tube for 4 pipe version, using the sensor holder clip and nylon clamps .
Wrap the whole with the adhesive insulation .
Note:
In the unit provided with valve, make certain that change over sensor is located on the primary circuit (waterworks side before the valve).