Canon ZR85, ZR80 User Manual

0 (0)
PUB.DIM-618
Mini
Digital Video Cassette
DV Network Software Version 2
Instruction Manual(Installation and Preparation)
This software is for use with Windows® XP only. Ce logiciel ne peut être employé que sous Windows® XP. Este software solamente es compatible con Windows® XP.
Mode d’emploi(Installation et préparation)
Manual de Instrucciones (Instalación y preparativos)
PUB. DIM-594
E
F
Es
This manual covers the installation and the connection procedures only. For more operating instructions, refer to the PDF format manual provided on the DIGITAL VIDEO SOLUTION DISK For Windows. Ce manuel traite uniquement des procédures d’installation et de connexion. Pour les instructions d’utilisation, reportez-vous au manuel au format PDF fourni sur le disque DIGITAL VIDEO SOLUTION DISK For Windows. Este manual solamente cubre los procedimientos de instalación y conexión. Para más instrucciones de operación, consulte el manual en formato PDF contenido en el disco DIGITAL VIDEO SOLUTION DISK For Windows.
Digital Video Camcorder
Instruction Manual
Camescope vidéo numérique
Manuel d’instruction
Videocámara digital
Manual de Instrucciones
English
Françai
Español
Please read also the following instruction manuals.
Veuillez lire aussi les modes d’emploi suivants.
Lea también los manuales de instrucciones siguientes.
Digital Video Software
DV Network Software
NTSC
2
Introduction
E
Important Usage Instructions
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
Digital Video Camcorder, ZR90/ZR85/ZR80 systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and use in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment.
Canon U.S.A. Inc. One Canon Plaza, Lake Success, NY 11042, U.S.A. Tel No. (516)328-5600
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.
COPYRIGHT WARNING:
Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws.
Important Warning
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure, that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
IMPORTANT SAFETY INSTRUCTIONS
In these safety instructions the word “product” refers to the Canon Digital Video Camcorder ZR90/ZR85/ZR80 A and all its accessories.
1. Read Instructions — All the safety and operating instructions should be read before the product is operated.
2. Retain Instructions — The safety and operating instructions should be retained for future reference.
3. Heed Warnings — All warnings on the product and in the operating instructions should be adhered to.
4. Follow Instructions — All operating and maintenance instructions should be followed.
5. Cleaning — Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. The product should be cleaned only as recommended in this manual.
6. Accessories — Do not use accessories not recommended in this manual as they may be hazardous.
7. Avoid magnetic or electric fields — Do not use the camera close to TV transmitters, portable communication devices or other sources of electric or magnetic radiation. They may cause picture interference, or permanently damage the camera.
8. Water and Moisture — Hazard of electric shock — Do not use this product near water or in rainy/moist situations.
9. Placing or Moving — Do not place on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.
10. Power Sources — The CA-570 Compact Power Adapter should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. Regarding other power sources such as battery power, refer to instructions in this manual.
11. Polarization — The CA-570 Compact Power Adapter is equipped with a polarized 2- prong plug (a plug having one blade wider than the other). The 2-prong polarized plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12. Power Cord Protection — Power cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to plugs and the point from which the cords exit the product.
13. Outdoor Antenna Grounding — If an outside antenna is connected to the product, be sure the antenna is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI / NFPA No. 70—1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See figure 1.
E
Introduction
3
14. Lightning — For added protection of this
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H)
NEC - NATIONAL ELECTRICAL CODE
ELECTRIC SERVICE EQUIPMENT
GROUND CLAMP
Fig. 1
product during a lightning storm, or when it is left unattended and unused for long periods of time, disconnect it from the wall outlet and disconnect the antenna. This will prevent damage to the product due to lightning and power-line surges.
15. Overloading — Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
16. Objects and Liquid Entry — Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Be careful not to spill liquid of any kind onto the product.
17. Servicing — Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
18. Damage Requiring Service — Disconnect this product from the wall outlet and all power sources including battery, and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is
damaged.
b. If any liquid has been spilled onto, or
objects have fallen into, the product.
c. If the product has been exposed to rain
or water.
d. If the product does not operate normally
even if you follow the operating instructions. Adjust only those controls that are covered by the operation instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
e. If the product has been dropped or the
cabinet has been damaged.
f. When the product exhibits a distinct
change in performance. This indicates a need for service.
19. Replacement Parts — When replacement parts are required, be sure the service technician has used replacement parts that are specified by Canon or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
20. Safety Check — Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in safe operating order.
4
When replacement of power supply is required, please return it to the responsible nearest Canon Service Center and please replace it with the same type number CA-570.
The Adapter can be used with a power supply between 100 and 240 V AC. For areas where 120 V AC power is not used, you will need a special plug adapter. Contact your nearest Canon Service Center for further information.
Use only CSA/UL Certified power supply cord set, Polarized, Type SPT-2 or heavier, minimum No. 18 AWG copper, rated 125 or 250 V, minimum ‚P A, minimum 6 ft (1.8 m), maximum 10 ft (3 m) long.
Using this Manual
CAMERA
CAMERA
Operating Mode POWER Switch TAPE/CARD Switch
CAMERA CAMERA b (TAPE)
PLAY (VCR) PLAY (VCR) b (TAPE)
CARD CAMERA CAMERA (CARD)
CARD PLAY PLAY (VCR) (CARD)
Shaded area : ZR90/ZR85 only.
Basic Functions -
E
Setting the Time Zone, Date and Time
Set the time zone, date and time when you first start using your camcorder, or when you have replaced the backup battery.
Setting the Time Zone/Daylight Saving Time
1. Press the MENU button to open the menu.
2. Turn the SET dial to select [SYSTEM] and press the SET dial.
3. Turn the SET dial to select [T.ZONE/DST] and press the SET dial.
The time zone setting appears (see table on the next page). The default setting is New
(
39)
Thank you for purchasing the Canon ZR90/ZR85/ZR80. Please read this manual carefully before you use the camcorder and retain it for future reference.
Change the display language before you begin ( 76).
Symbols and References Used in This Manual
: Precautions related to the camcorder operation. : Additional topics that complement the basic operating procedures.
: Reference page number. Capital letters are used to refer to buttons on the camcorder or the wireless controller
(ZR90/ZR85).
[ ] are used to refer to menu items displayed on the screen. “Screen” refers to the LCD and the viewfinder screen. Please note that the illustrations mainly refer to the ZR90.
Operating modes (see below) Menu item and its default setting.
Button and switches to be operated
CARD PLAYCARD CAMERAPLAY (VCR)CAMERA
E
Introduction
: Function can be used in this mode.
: Function cannot be used in this mode.
Trademark Acknowledgements
Canon and Bubble Jet are registered trademarks of Canon Inc.
D is a trademark.
is a trademark.
Windows
Macintosh and Mac OS are trademarks of Apple Computer, Inc., registered in the United States and
Other names and products not mentioned above may be registered trademarks or trademarks of their
®
is either a registered trademark or trademark of Microsoft Corporation in the United States
and/or other countries.
other countries.
respective companies.
5
Table of Contents
Introduction
Important Usage Instructions ........................................................................................2
Important Safety Instructions ........................................................................................3
Using this Manual ..........................................................................................................5
Checking Supplied Accessories ......................................................................................8
Components Guide ........................................................................................................9
Basic Functions
Preparations
Preparing the Power Supply........................................................................................13
Loading/Unloading a Cassette ....................................................................................16
Installing the Backup Battery ......................................................................................17
Preparing the Camcorder ............................................................................................18
Setting the Time Zone, Date and Time......................................................................21
Recording
Recording Movies on a Tape ......................................................................................24
Recording Still Images on a Tape................................................................................29
Zooming ........................................................................................................................30
Tips for Making Better Videos ....................................................................................32
Playback
Playing Back a Tape ......................................................................................................33
Adjusting the Volume ..................................................................................................35
Playing Back on a TV Screen........................................................................................36
Advanced Functions
Menus and Settings ......................................................................................................39
Recording
Using the Recording Programs....................................................................................46
Using the Night Modes ................................................................................................49
Skin Detail Function......................................................................................................50
Adjusting the AE Shift..................................................................................................51
Adjusting the Focus Manually ....................................................................................52
Setting the White Balance ..........................................................................................54
Setting the Shutter Speed............................................................................................56
Using the Self-Timer......................................................................................................58
Changing the Recording Mode (SP/LP) ......................................................................59
Audio Recording ..........................................................................................................60
Using Digital Effects......................................................................................................62
Playback
Magnifying the Image..................................................................................................69
Displaying the Data Code ............................................................................................70
End Search......................................................................................................................72
6
Using the Wireless Controller ............................................................20
Returning to a Pre-marked Position ..................................................73
Photo Search/Date Search ..................................................................74
Other Functions
Customizing the Camcorder ........................................................................................75
Changing the Display Language ................................................................................76
Changing the Remote Sensor Mode ................................................77
Other Camcorder Settings ..........................................................................................78
Editing
Recording to a VCR or Digital Video Device ............................................................80
Recording from Analog Video Devices (VCR, TV or Camcorder) ..........................82
Recording from Digital Video Devices (DV Dubbing)..............................................83
Converting Analog Signals into Digital Signals (Analog-Digital Converter) ........84
Replacing Existing Scenes (AV Insert) ................................................86
Audio Dubbing ....................................................................................88
Connecting to a Computer Using a DV (IEEE1394) Cable ......................................91
Using a Memory Card
Inserting and Removing a Memory Card ..................................................................92
Selecting the Image Quality/Size ................................................................................93
File Numbers ..................................................................................................................95
Recording Still Images on a Memory Card ................................................................96
Reviewing a Still Image Right after Recording ......................................................100
Recording Motion JPEG Movies on a Memory Card..............................................101
Selecting the Focusing Point ....................................................................................103
Recording Panoramic Images (Stitch Assist Mode) ................................................104
Playing Back a Memory Card ....................................................................................106
Protecting Images ......................................................................................................109
Erasing Images ............................................................................................................110
Combining Images (Card Mix) ..................................................................................111
Copying Still Images....................................................................................................115
Formatting a Memory Card ......................................................................................117
Connecting to a Computer Using a USB Cable ......................................................118
Creating a Start-up Image ........................................................................................119
Direct Printing
Printing Still Images ....................................................................................................120
Selecting the Print Settings (Paper/Style) ................................................................123
Printing with Print Order Settings............................................................................126
Additional Information
Screen Displays ............................................................................................................128
List of Messages ..........................................................................................................131
Maintenance/Others ..................................................................................................134
Troubleshooting..........................................................................................................140
System Diagram ........................................................................................................143
Optional Accessories ..................................................................................................144
Specifications ..............................................................................................................147
Index ............................................................................................................................149
E
Introduction
7
Checking Supplied Accessories
Lens Cap and Lens Cap Cord
CA-570 Compact Power Adapter (incl. power cord)
WL-D82 Wireless Controller
DIGITAL VIDEO SOLUTION DISK For Windows For Macintosh
Lithium Button Battery CR1616
STV-250N Stereo Video Cable
Two AA (R6) Batteries
SS-900 Shoulder Strap
Card (containing sample images)
BP-508 Battery Pack
IFC-300PCU USB CableSDC-8M SD Memory
WA-30.5 Wide Attachment
The serial number of this product can be found on the underside of the viewfinder. Write down the number and other information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Date of Purchase: Model Name: ZR90/ZR85/ZR80 A Purchased From: Serial No.: Dealer Address: Dealer Phone No.:
8
Components Guide
Memory card slot* ( 92)
(self-timer) button ( 58) /
DATA CODE button ( 70)
REC SEARCH + button ( 28) / (fast forward) button ( 34) / CARD
+ button* ( 106)
FOCUS button ( 52) / (play/pause) button ( 33)
REC SEARCH button ( 28) / (record review) button ( 28) /
(rewind) button ( 33) /
CARD
button* ( 106)
(stop) button ( 33)
NIGHT MODE button ( 49) /
BATT. RELEASE button ( 13)
OPEN button ( 24)
Program AE
Easy recording
Program selector ( 47)
CHARGE indicator ( 13) / Card access indicator* ( 96)
SET dial ( 39)
MENU button ( 39)
DC IN terminal ( 13)
LCD screen ( 24)
Built-in speaker( 35)
DIGITAL EFFECTS button ( 65)
DIGITAL EFFECTS ON/OFF button ( 65)
AE SHIFT button ( 51) / END SEARCH button ( 72)
CARD MIX button* ( 112) / (stitch assist) button* ( 104) / SLIDE SHOW button* ( 107) / REC PAUSE button ( 82)
Backup battery compartment ( 17)
Battery attachment unit ( 13)
/OFF
CARD MIX / / SLIDE SHOW / REC PAUSE
AE SHIFT/ END SEARCH
ZR90/ZR85/ZR80
* ZR90/ZR85 only.
E
Introduction
9
b
Using a memory card
Using a tape
TAPE/CARD switch*( 5)
Dioptric adjustment lever ( 18)
Strap mount ( 19)
Power switch ( 5)
Grip belt ( 18)
PHOTO button ( 29, 96)
Accessory shoe ( 145)
Zoom lever ( 30)
Viewfinder ( 18)
Viewfinder protect cover ( 135)
Cassette compartment ( 16)
Cassette compartment cover ( 16)
Strap mount ( 19)
Serial number
Start/stop button ( 24, 101)
(V
CR)
(VCR)
PO
W
ER
POWER
CAMERACAMERA
PLAY
OFF
CAMERA OFF PLAY(VCR)
* ZR90/ZR85 only.
10
S
DV
Stereo microphone ( 60)
Remote sensor*( 20)
DV terminal ( 80, 91)
S-video terminal**( 37)
AV terminal ( 36) / (phones) terminal ( 35, 61)
USB terminal*( 118, 120)
Assist lamp (White LED)** ( 49)
Terminal cover
Bottom view
Tripod socket ( 32)
OPEN/EJECT 5 switch ( 16)
Terminal cover
E
Introduction
* ZR90/ZR85 only. ** ZR90 only.
11
WT
WIRELESS CONTROLLER WL-D82
START /STOP
PHOTO
ZOOM
SELF T. D.EFFECTS
ON/OFF
SET
MENU
TV SCREEN
REW
PAUSE
AV INSERT AV DV
REMOTE SET
SLOW
2
PLAY
STOP
FF
ZERO SET MEMORY
REC
PAUSE
12bit
AUDIO OUT
SEARCH SELECT
DATA CODE
AUDIO DUB.
SLIDE SHOW
CARD
Zoom buttons ( 30)
Select buttons ( 39)
PHOTO button ( 29, 96)
START/STOP button ( 24, 101)
SELF T. button ( 58)
D. EFFECTS button, ON/OFF button ( 65)
TV SCREEN button ( 128)
DATA CODE button ( 70)
-/+ buttons ( 74)
SEARCH SELECT button ( 74)
ZERO SET MEMORY button ( 73)
12bit AUDIO OUT button ( 89)
AUDIO DUB. button ( 88)
REC PAUSE button ( 82)
AV INSERT button ( 86)
AV DV button ( 84)
REMOTE SET button ( 77)
Transmitter
MENU button ( 39)
SET button ( 39)
CARD buttons ( 106)
SLIDE SHOW button ( 107)
REW button ( 33)
PLAY button ( 33)
FF button ( 34)
button ( 34)
STOP button ( 33)
button ( 34)
PAUSE button ( 34)
SLOW button ( 34)
2 button ( 34)
q w e r t y u i o !0 !1 !2 !3 !4 !5 !6
!8 !9 @0 @1 @2 @3 @4 @5 @6 @7 @8 @9 #0 #1
!7
!8
q
!9
e
y u i
!4
!1
!3
!2
!5 !6 !7
r t
w
@0
o
@5 @6 @7
@2 @3 @4
@8
#0 #1
@9
@1
!0
WL-D82 Wireless Controller
12
Preparing the Power Supply
(VCR)
POWER
CAMERA
PLAY
OFF
e
q
w
Attaching the Battery Pack
1. Turn the POWER switch to OFF.
2. Move the viewfinder upward.
3. Attach the battery pack to the camcorder.
Remove the terminal cover of the battery
pack.
Press lightly and slide it in the direction of
the arrow until it clicks.
Charging the Battery Pack
1. Connect the power cord to the adapter.
2. Plug the power cord into a power outlet.
3. Connect the power adapter to the camcorder’s DC IN terminal.
The CHARGE indicator starts flashing. It glows steadily when charging is complete.
4. When charging is complete, disconnect the power adapter from the camcorder. Unplug the power cord from the power outlet and disconnect it from the adapter.
5. Remove the battery pack after use.
Press the BATT. RELEASE button to remove the battery.
CHARGE indicator
CARD/CHARGE
w
q
e
DC IN terminal
DC IN
8.4V
E
Basic Functions -
Preparations
13
(VCR)
POWER
CAMERA
PLAYPLAY
OFFOFF
e
q
w
r
Using a Household Power Source
1. Turn the POWER switch to OFF.
2. Connect the power cord to the power adapter.
3. Plug the power cord into a power outlet.
4. Connect the power adapter to the camcorder’s DC IN terminal.
Turn off the camcorder before connecting or disconnecting the power adapter. If the adapter is used close to a TV, it may cause picture interference. Move the
adapter away from the TV or the antenna cable.
Do not connect any products that are not expressly recommended to the
camcorder’s DC IN terminal or to the power adapter.
You may hear some noise from the power adapter during use. This is not a
malfunction.
Do not disconnect and reconnect the power cord while charging a battery
pack. The battery pack may not be charged correctly even if the CHARGE indicator glows steady. The battery pack may also not be charged correctly when a power outage occurs during charging. Remove the battery pack and attach it back to the camcorder.
The battery pack may be defective when the CHARGE indicator flashes rapidly. The CHARGE indicator informs you about the charge status.
0-50%: Flashes once every second More than 50%: Flashes twice every second 100%: Glows steadily
Charging, Recording and Playback Times
Below times are approximate and vary according to the charging, recording or playback conditions.
(Supplied) (Optional) (Optional) (Optional) (Optional)
125 min. 225 min. 260 min. 455 min. 730 min.
14
Charging Time 110 min. 120 min. 150 min. 210 min. 310 min. Max. Recording Time Typical Recording Time* Playback Time 90 min. 170 min. 195 min. 345 min. 550 min.
* Approximate times for recording with repeated operations such as start/stop, zooming,
power on/off. Actual time may be shorter.
Viewfinder LCD 85 min. 155 min. 180 min. 320 min. 520 min. Viewfinder LCD 45 min. 85 min. 100 min. 175 min. 280 min.
BP-508 BP-512/ BP-514 BP-522 BP-535
BP-511
65 min. 125 min. 145 min. 255 min. 405 min.
• Charge the battery pack in temperatures between 41 ºF and 104 ºF (5 ºC and 40 ºC).
A lithium ion battery pack can be charged at any charge state. Unlike conventional battery packs, you do not need to completely use or discharge it before charging.
We recommend that you prepare battery packs 2 to 3 times longer than you think you might need.
To conserve battery charge, turn off the camcorder instead of leaving it in record pause mode.
E
Basic Functions -
Preparations
15
Loading/Unloading a Cassette
e
w
q
r
Use only videocassettes marked with the D logo.
1. Slide and hold the OPEN/EJECT switch and open the cassette compartment cover.
The cassette compartment opens automatically.
2. Load/unload the cassette.
Load the cassette with the window facing
the grip belt.
Unload the cassette by pulling it straight
out.
3. Press the P mark on the cassette compartment until it clicks.
4. Wait for the cassette compartment to retract automatically and close the cassette compartment cover.
Tape protection tab
16
Do not interfere with the cassette compartment while it is opening or closing
automatically, or attempt to close the cover before the cassette compartment has fully retracted.
Be careful not to get your fingers caught in the cassette compartment cover.
If the camcorder is connected to a power source, cassettes can be loaded/ unloaded even if the POWER switch is set to OFF.
Installing the Backup Battery
q
e
w
The backup battery allows the camcorder to retain date, time ( 21) and other camcorder settings while the power source is disconnected. Power the camcorder from a household power source when replacing the backup battery to retain the settings.
1. Open the backup battery cover.
2. Insert the lithium battery with the + side facing outward.
3. Close the cover.
WARNING!
The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, heat above 212 °F (100 °C) or incinerate the battery.
Replace the battery with a CR1616 made by Panasonic, Hitachi Maxell, Sony, Toshiba, Varta or Renata. Use of other batteries may present a risk of fire or explosion.
Do not pick up the battery using tweezers or other metal tools as this will
cause a short circuit.
Wipe the battery with a clean dry cloth to ensure proper contact. Keep the battery out of reach of children. If it is swallowed, seek medical
assistance immediately. The battery case may break and the battery fluids may damage stomach and intestines.
Do not disassemble, heat or immerse the battery in water to avoid the risk of
explosion.
The backup battery has a life span of about a year. j flashes in red to inform you that it needs to be replaced.
E
Basic Functions -
Preparations
17
Preparing the Camcorder
Adjusting the Viewfinder (Dioptric Adjustment)
1. Turn on the camcorder and keep the LCD panel closed.
2. Pull out the viewfinder.
3. Adjust the diopter adjustment lever.
Attaching the Lens Cap
1. Attach the cord to the lens cap.
2. Pass the grip belt through the loop with the metal fitting on the cord.
Press the buttons on the lens cap when attaching/removing it. Hook the lens cap on the grip belt while you are recording, and place it over the lens when you have finished.
Metal fitting
Fastening the Grip Belt
Hold the camcorder with your right hand and adjust the belt with your left.
Adjust the grip belt so that you can reach the zoom lever and photo button with your index finger, and the start/stop button with your thumb.
18
Attaching the Shoulder Strap
Pass the ends through the strap mount and adjust the length of the strap.
SS-900 Shoulder strap
Mounting the Wide Attachment
The WA-30.5 Wide Attachment gives you a wide perspective for indoor shots or panoramic views (0.6×). The wide attachment is for use at maximum wide-angle.
Screw the wide attachment fully into the lens filter thread.
Do not look directly at the sun or other strong light sources through the wide
attachment. It could damage your eyesight.
If you zoom to telephoto, the picture will not be in focus. The wide attachment may obstruct the remote sensor (the range of the
wireless controller narrows), or may cause a shadow to appear on the picture when recording with a video light or the assist lamp (White LED).
Filters cannot be used with the wide attachment. If dust accumulates on the wide attachment or on the camcorder lens, clean
both lenses gently with a blower brush.
Do not touch the lens to avoid smudges and fingerprints. Do not store the wide attachment in a humid place as it may mold.
E
Basic Functions -
Preparations
19
Using the Wireless Controller
Point it at the camcorder’s remote sensor when you press the buttons.
Inserting Batteries
The wireless controller operates with two AA (R6) batteries.
1. Open the battery cover.
2. Insert the batteries following the + and – markings.
Replace both batteries.
3. Close the battery cover.
20
Camcorder and wireless controller are equipped with 2 remote sensor modes
( 77). If the wireless controller does not work, check if camcorder and wireless controller are set to the same mode.
The wireless controller may not work properly when the remote sensor is
subjected to strong light sources or direct sunlight.
Setting the Time Zone, Date and Time
CARD PLAY
CARD CAMERA
T.ZONE/DST•••N.Y. SYSTEM
Set the time zone, date and time when you first start using your camcorder, or when you have replaced the backup battery.
Setting the Time Zone/Daylight Saving Time
CARD PLAYCARD CAMERAPLAY (VCR)CAMERA
( 39)
1. Press the MENU button to open the menu.
2. Turn the SET dial to select [SYSTEM] and press the SET dial.
3. Turn the SET dial to select [T.ZONE/DST] and press the SET dial.
The time zone setting appears (see table on the next page). The default setting is New York.
4. Turn the SET dial to select the setting option that represents your time zone and press the SET dial.
To adjust for daylight saving time, select the time zone with the U next to the area.
Setting the Date and Time
E
Basic Functions -
Preparations
PLAY (VCR)CAMERA
( 39)
SYSTEM
D/TIME SET•••JAN. 1,2004 12:00 PM
5. Turn the SET dial to select [D/TIME SET] and press the SET dial.
The year display starts to flash.
6. Turn the SET dial to select the year, and press the SET dial.
The next part of the display starts flashing.
Set the month, day, hours and minutes in the same way.
21
7. Press the MENU button to close the menu and to
1
24 1 2 3 4 5 6 7 8 9 10 11 12 1314 15 16 17 18 19 20 21 22 23
2
3
5
6
7
9
8
10
4
12
11
13
24
19
20
18
17
21
23
22
15
14
16
Time zone
LONDON PARIS CAIRO MOSCOW DUBAI KARACHI DACCA BANGKOK H. KONG (Hong Kong) TOKYO SYDNEY SOLOMON
WELLGTN (Wellington) SAMOA HONOLU. (Honolulu) ANCHOR. (Anchorage) L.A. (Los Angeles) DENVER CHICAGO N.Y. (New York) CARACAS RIO (Rio de Janeiro) FERNAN. (Fernando de Noronha) AZORES
No.
Time zone
No.
start the clock.
Once you have set time zone, date and time, you do not need to reset the clock each time you travel to another time zone. Just set the time zone to the one of your destination, and the camcorder automatically adjusts the clock.
22
Displaying Date and Time during Recording
CARD PLAY
CARD CAMERA
You can display the date and time in the lower left corner of the screen.
CAMERA
PLAY (VCR)
E
( 39)
D/T DISPLAY••OFFDISPLAY SETUP/
1. Press the MENU button to open the menu.
2. Turn the SET dial to select [DISPLAY SETUP/ ] and press the SET dial.
3. Turn the SET dial to select [D/T DISPLAY] and press the SET dial.
4. Turn the SET dial to select [ON].
5. Press the MENU button to close the menu.
Basic Functions -
Preparations
23
Recording Movies on a Tape
PLAY
Before You Begin Recording
Make a test recording first to check if the camcorder operates correctly. Before you make important recordings, clean the video heads ( 135).
Recording
1. Remove the lens cap.
2. Set the camcorder to CAMERA mode.
Set the POWER switch to
CAMERA and the TAPE/CARD switch to b.
Set the POWER switch to
CAMERA.
3. Push the OPEN button at the LCD panel and open the LCD panel.
4. Press the start/stop button to begin recording.
Press the start/stop button again to pause recording.
q
w
r
POWER
POWER
PLAY
CAMERA
OFF
PLAY
CAMERA
OFF
(VCR)
(VCR)
e
When You Have Finished Recording
1. Turn the POWER switch to OFF.
2. Close the LCD panel and return the viewfinder into its initial position.
3. Replace the lens cap.
4. Unload the cassette.
5. Disconnect the power source.
24
Wait until the tape counter stops completely before you start recording.
CARD PLAY
CARD CAMERA
When you do not remove the cassette, you can record the next scene without
producing any noise or blank sections between the recordings even if you turn the camcorder off.
Bright light may make it difficult to use the LCD screen. In such case, use the
viewfinder instead.
You can rotate the LCD panel. Make sure to open
the LCD panel at 90 degrees before rotating it.
When recording near loud sounds (such as fireworks, drums or concerts),
sound may become distorted or may be recorded not in the actual sound level.
The camcorder will shut off after 5 minutes when left in record pause
mode to protect tape and video heads. “ AUTO POWER OFF” appears 20 seconds before shutoff. To continue recording, turn the POWER switch to OFF and then back to CAMERA.
About the LCD and viewfinder screen: The screens are produced with
extremely high-precision manufacturing techniques, with more than
99.99% of the pixels operating to specification. Less than 0.01% of the pixels may occasionally misfire or appear as black or green dots. This has no effect on the recorded image and does not constitute a malfunction.
Allowing the Subject to Monitor the LCD Screen
You can rotate the LCD panel so that the screen faces in the same direction as the lens. The viewfinder switches on allowing you to use the viewfinder while the subject can monitor the screen. The image appears mirror reversed (LCD MIRROR ON). However, you can choose to display the image as it is being recorded (LCD MIRROR OFF).
CAMERA
PLAY (VCR)
E
Basic Functions -
Recording
( 39)
DISPLAY SETUP/
LCD MIRROR•••ON
1. Press the MENU button to open the menu.
25
2. Turn the SET dial to select [DISPLAY SETUP/ ] and
CARD PLAY
CARD CAMERA
press the SET dial.
3. Turn the SET dial to select [LCD MIRROR] and press the SET dial.
4. Turn the SET dial to select [OFF].
5. Press the MENU button to close the menu.
When [LCD MIRROR] is set to [ON], only tape (ZR90/ZR85: or card) operation and self-timer displays appear on the LCD screen (all displays appear on the viewfinder screen).
Adjusting the Brightness of the LCD Screen
CAMERA
( 39)
DISPLAY SETUP/
PLAY (VCR)
BRIGHTNESS•••
1. Press the MENU button to open the menu.
2. Turn the SET dial to select [DISPLAY SETUP/ ] and press the SET dial.
3. Turn the SET dial to select [BRIGHTNESS] and press the SET dial.
4. Turn the SET dial to adjust the brightness level.
5. Press the MENU button to close the menu.
Changing the brightness of the LCD screen does not affect that of the viewfinder or the recordings.
26
–+
Screen Displays during Recording
q Time code
Indicates the recording time in hours, minutes and seconds.
w Remaining tape
Indicates the remaining time of the tape in minutes. b END flashes when the tape reaches the end.
When the time left is less than 15 seconds, the remaining tape time may not appear.
Depending on the type of the tape, the indication may not be displayed correctly.
e Remaining battery charge
q
The battery symbol indicates the charge
w
status of the battery pack.
e r
t
k starts flashing in red when the battery pack is empty.
When you attach an empty battery pack, the power may turn off without displaying k.
The actual battery charge may not be indicated accurately depending on the condition under which battery pack and camcorder are used.
r When j flashes
j flashes in red when the lithium
button battery is not installed, or when it runs out.
t Recording reminder
The camcorder counts from 1 to 10 seconds when you start recording. This is helpful to avoid scenes that are too short.
E
Basic Functions -
Recording
27
Searching and Reviewing when Recording
CARD PLAY
CARD CAMERA
CARD
REC SEARCH – button/ v (record review) button
REC SEARCH + button
Record Review
CAMERA
CARD CAMERAPLAY (VCR)
CARD PLAY
In record pause mode, this function allows you to review the last few seconds of your recording to check if it has been recorded properly.
Press and release the c (record review) button.
The camcorder rewinds the tape, plays back the last few seconds, and returns to record pause mode.
Record Search
CAMERA
In record pause mode, this function allows you to play back the tape (forward or reverse) to locate the point where you wish to begin recording.
PLAY (VCR)
Press and hold the REC SEARCH + button (forward) or – button (reverse).
Release the button at the point you wish to begin recording.
The camcorder returns to record pause mode.
28
Recording Still Images on a Tape
CARD PLAY
CARD CAMERA
PHOTO button
E
CAMERA
PLAY (VCR)
1. Open the menu and select [CAMERA SETUP]. Select [PHOTO REC], confirm that [TAPE b] is selected and close the menu.
2. Press the PHOTO button halfway.
F appears in green. If it does not appear in green, adjust the
focus with the SET dial.
Exposure is locked.
When you press the PHOTO button on the
wireless controller, recording starts immediately.
3. Press the PHOTO button fully.
F disappears.
The camcorder records the still image for approx. 6 seconds.
During this time, the camcorder displays the still image and keeps recording the sound.
The camcorder returns to record pause mode.
You can also record a still image while you are recording a movie by pressing
the PHOTO button fully.
Starting your recording with a still image allows you to easily
locate the beginning of the recording with the Photo Search function ( 74).
PHOTO
PHOTO
Basic Functions -
Recording
29
Zooming
CARD PLAY
CARD CAMERA
The camcorder automatically switches between optical zooming and digital zooming. Image resolution is slightly lower with the digital zoom.
Zoom in
T
W
MENU button
SET dial
Zoom out
Zoom lever
Optical Zoom
22× optical zoom 20× optical zoom 18× optical zoom
CAMERA
Move the zoom lever toward W to zoom out (wide- angle). Move it toward
Press the zoom lever slightly for a slow zoom. Press harder for a faster zoom.
However, you cannot control the zoom speed.
PLAY (VCR)
T to zoom in (telephoto).
You can also use the
T and W buttons on the wireless controller.
30
Loading...
+ 123 hidden pages