MP F50 MP F30
SERVICE MANUAL
Canon
REVISION 0
MultiPASS F50 |
H12-2192 |
120V |
USA |
MultiPASS F50 |
H12-2193 |
120V |
CND/LTN |
MultiPASS F30 |
H12-2202 |
120V |
USA |
MultiPASS F30 |
H12-2203 |
120V |
CND/LTN |
|
|
|
|
JULY 2001 |
HY8-19AV-000 |
COPYRIGHT © 2001 CANON INC. |
CANON MultiPASS F50/F30 JULY 2001 |
Application
This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation, maintenance, and repair of products. This manual covers all localities where the products are sold. For this reason, there may be information in this manual that does not apply to your locality.
Corrections
This manual may contain technical inaccuracies or typographical errors due to improvements or changes in products. When changes occur in applicable products or in the content of this manual, Canon will release technical information as the need arises. In the event of major changes in the contents of this manual over a long or short period, Canon will issue a new editions of this manual.
The following paragraph does not apply to any countries where such provisions are inconsistent with local
law.
Trademarks
The product names and company names described in this manual are the registered trademarks of the individual companies.
Copyright
This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may not be copied, reproduced or translated into another language, in whole or in part, without the written consent of Canon Inc.
Copyright © 2001 by Canon Inc.
CANON INC.
Office Imaging Consumer Products Quality Assurance Dept. 1
5-1 Hakusan 7-Chome,Toride-city, Ibaraki 302-8501, Japan
DTP System
This manual was produced on a Windows98®, personal computer, final pages were printed on AGFA SelectSet Avantra 25.
All graphics were produced with Adobe Illustrator 9.0J®.
All documents and all page layouts were created with Adobe PageMaker 6.5®.
I. MEANING OF MARKS
The marks used in this manual have the following meanings.
Mark Meaning
States a precaution to be taken to prevent danger to personnel, damage to the product, or damage to electronic components by discharge of static electricity. for example.
States a precaution to be taken to prevent damage to electronic components by electrostatic discharge.
If the following mark is used, following the directions given.
Informs you of fire-related cautions.
Informs you that the plug must be removed from the power outlet before starting an operation.
Gives useful information to understand descriptions.
Indicates sections to be read to obtain more detailed information.
I
II. ABOUT THIS MANUAL
This manual is divided into five parts, and contains information required for servicing the product.
Each of the above parts is further divided into the following four chapters:
Chapter 1: General Description
This part explains product specifications and the how to service the unit safely. It is very important, so please read it.
Chapter 2: Technical Reference
This part explains the technical theory the product.
Chapter 3: Assembly and Disassembly
This part explains the assembly and disassembly of the product.
Chapter 4: Maintenance and Service
This part explains how to maintain the products for adjustment and troubleshooting and service operations and service switches.
Chapter 5: Appendix
This part explains the informations of the optional products and user data flow.
• For more details of user operations and user reports, see the separate volume of USER'S GUIDE.
• Detailed description of each SSSW/parameter is not given in this manual except the new SSSWs/parameters added to this model.
See G3 Facsimile Service Data Handbook (supplied separately) for details them.
•See the G3 Facsimile Error Code List (Rev.1, supplied separately) for details of the error codes not shown in this manual.
II
III. REVISION HISTORY
REVISION |
CONTENT |
|
|
0 |
Original |
III
IV. TABLE OF CONTENTS
Page |
Chapter 1: General Description |
||
1 - 1 |
1. FEATURES |
||
1 - 1 |
1.1 |
Overview |
|
1 - 2 |
2. SPECIFICATIONS |
||
1 - |
2 |
2.1 |
General Specification |
1 - 2 |
2.2 |
Communication Specification (MultiPASS F50 only) |
|
1 - 3 |
2.3 |
Color Communication Specification (MultiPASS F50 only) |
|
1 - |
4 |
2.4 |
Scanner Specification |
1 - |
6 |
2.5 |
Printer Specification |
1 - |
9 |
2.6 |
Copy Specification |
1 -10 |
2.7 |
Function |
|
1 -12 |
3. OVERVIEW |
||
1 -12 |
3.1 |
External View |
|
1 -13 |
3.2 |
Operation Panel |
|
1 -16 |
3.3 |
Consumables |
|
1 -16 |
|
3.3.1 BJ cartridge and ink cartridge |
|
1 -17 |
|
3.3.2 Print media |
Chapter 2: Technical Reference
2 - 1 |
1. COMPONENT LAYOUT |
||
2 - |
1 |
1.1 |
Parts Layout |
2 - 4 |
2. SCANNER MECHANISM |
||
2 - 6 |
3. PRINTER SECTION |
||
2 - |
6 |
3.1 |
Overview of the Printer's Mechanical Parts |
2 - |
7 |
|
3.1.1 Carriage |
2 - |
7 |
|
3.1.2 Purge section |
2 - |
7 |
|
3.1.3 Paper feed section |
2 - 8 |
3.2 |
Paper Feed Section |
|
2 - 8 |
|
3.2.1 Paper feed components |
|
2 - |
9 |
|
3.2.2 Friction separation system |
2 - |
9 |
|
3.2.3 Paper transport section |
2 - |
9 |
|
3.2.4 Paper discharge section |
2 -10 |
3.3 |
About the Ink Sensor |
|
2 -12 |
3.4 |
Purge Section |
|
2 -12 |
|
3.4.1 Purge section functions |
|
2 -13 |
|
3.4.2 Purge section components |
|
2 -15 |
3.5 |
Ink Suction Amount in the Cleaning Mode |
|
2 -16 |
3.6 |
Printing Mode List |
|
2 -17 |
4. NEW FUNCTION |
IV
Chapter 3: Assembly and Disassembly
3 - 1 |
1. ATTENTION TO BE PAID DURING ASSEMBLY/ DISASSEMBLY |
||
3 - |
1 |
1.1 |
Safety Cautions |
3 - |
2 |
1.2 |
General Cautions |
3 - |
3 |
1.3 |
Product-Inherent Cautions |
3 - |
3 |
1.4 |
Action in the Event of Abnormality (All Clear) |
3 - |
4 |
1.5 |
Removal of red screws prohibited |
3 - 5 |
2. DISASSEMBLY/ASSEMBLY |
||
3 - |
5 |
2.1 |
Parts Layout |
3 - 8 |
2.2 |
Disassembly Work-Flow |
|
3 - 9 |
2.3 |
Disassembly Procedure |
Chapter 4: Maintenance and Service
4 - 1 |
1. MAINTENANCE LIST |
||
4 - 1 |
1.1 |
Consumables |
|
4 - |
1 |
1.2 Cleaning |
|
4 - |
2 |
1.3 |
Periodic Inspection |
4 - |
2 |
1.4 |
Periodic Replacement Parts |
4 - |
2 |
1.5 |
Adjustment Items |
4 - |
3 |
1.6 |
General Tools |
4 - |
3 |
1.7 |
Special Tools |
4 - 4 |
2. HOW TO CLEAN PARTS |
||
4 - 4 |
2.1 |
Main Unit Outer Covers |
|
4 - |
4 |
2.2 |
Pickup Separation Roller (MultiPASS F50 only) |
4 - 4 |
2.3 |
Document U-Turn Feed/Eject Roller (MultiPASS F50 only) |
|
4 - |
4 |
2.4 |
Separation Guide (MultiPASS F50 only) |
4 - 4 |
2.5 |
Document Guide Sheet (MultiPASS F50 only) |
|
4 - 4 |
2.6 |
White Sheet (MultiPASS F50 only) |
|
4 - 4 |
2.7 |
Document Glass |
|
4 - |
4 |
2.8 |
Printer Platen |
4 - 6 |
3. ADJUSTMENT |
||
4 - 6 |
3.1 |
CS LED Lights-on Duration Adjustment |
|
4 - |
7 |
3.2 |
When Adjustment of the Print Head Position is Required |
4 -10 |
4. TROUBLESHOOTING |
||
4 -10 |
4.1 |
Troubleshooting Index |
|
4 -12 |
4.2 |
Errors Shown on the Display |
|
4 -12 |
|
4.2.1 User error message |
|
4 -17 |
|
4.2.2 Error codes |
|
4 -25 |
4.3 |
Errors not Shown on the Display |
|
4 -25 |
|
4.3.1 General errors |
|
4 -26 |
|
4.3.2 Printing problems |
|
4 -28 |
|
4.3.3 Scanning problems |
|
4 -30 |
4.4 |
Processing Communication Problems |
|
4 -30 |
|
4.4.1 Initial identification of problems |
V
4 -31 |
|
4.4.2 Procedures for processing communication problems |
4 -34 |
5. SERVICE SWITCHES |
|
4 -34 |
5.1 |
Hardware Switches |
4 -34 |
5.2 |
Service Data Setting |
4 -34 |
|
5.2.1 Service data overview |
4 -35 |
|
5.2.2 Service data registration/setting method |
4 -36 |
|
5.2.3 Service data setting |
4 -43 |
|
5.2.4 Explanation of service data |
4 -44 |
|
5.2.5 New SSSWs/parameters added to this model |
4 -48 |
6. TEST FUNCTIONS |
|
4 -48 |
6.1 |
User Test Print Functions |
4 -48 |
|
6.1.1 Nozzle check pattern |
4 -49 |
6.2 |
Service Test Functions |
4 -49 |
|
6.2.1 Test mode overview |
4 -50 |
|
6.2.2 Test mode flowchart |
4 -52 |
|
6.2.3 D-RAM tests |
4 -52 |
|
6.2.4 CS tests |
4 -53 |
|
6.2.5 PRINT test |
4 -55 |
|
6.2.6 Modem and NCU tests |
4 -58 |
|
6.2.7 Faculty tests |
4 -63 |
7. SERVICE REPORT |
|
4 -63 |
7.1 |
Report Output Function |
4 -63 |
|
7.1.1 User report output functions |
4 -65 |
|
7.1.2 Service report output functions |
4 -77 |
8. WIRING DIAGRAM |
|
4 -77 |
8.1 |
Wiring Diagram |
Chapter 5: Appendix
5 - 1 |
1. USER DATA FLOW |
||
5 - |
1 |
1.1 |
User Data Flow (by Operation Panel) |
5 - |
4 |
1.2 |
User Data Flow (by MultiPASS Suite) |
INDEX
VI
Chapter 1
General
Description
MultiPASS F50/F30 Chapter 1: General Description
1.1Overview
This product is a G3 transreceiving facsimile based on the ITU-T recommendations. It can be used in telephone networks.
Picture Quality Color Printer
High quality printing can be accomplished with the Canon Bubble Jet (BJ) method using the maximum 2400dpi × 1200dpi resolution. Various kinds of media can be printed with the high speed of a maximum 17 pages per minute. The printing paper tray can hold up to 100 sheets of plain paper, 30 sheets of OHP film, or 10 back print films or envelopes.
Plain paper fax which can transmit/receive in color
Conforming to ITU-T recommendations, this fax is able to transmit/receive in color. Due to containing extremely high-speed 33.6kbps modems, transmission time can be shortened. Pictures and photographs can both be send and received clearly by UHQ (Ultra High quality), Canon’s vivid image processing technology. Up to 30 letteror A4size sheets, or up to 10 legal-size sheets, can be set in the ADF *1. 12 one-touch dial entries and 100 speed dial entries can be registered, and group dial and broadcasting transmission can also be done. When paper and ink run out, the data is saved to memory, so there is no worry. When a external-phone is attached, fax communication and normal telephone reception are possible due to DRPD service and FAX/TEL switching.
Out-of-Ink Function
This machine has a function which detects when ink has run out. It also detects when the cartridges of machines equipped with color communications are out of ink. The presence/absence of ink in the ink chamber is detected by reflecting ink sensor.
Copy Function
This machine can be used as a 1200dpi × 1200 dpi high resolution full color copier. With a monochrome document (including half-tone), up to 99 pages can be copied at one time at the speed of a maximum of 17 pages/minute.
Full Color & 256 Gradation Grayscale Scanner
Using graphics or OCR software which conforms to the TWAIN standard, full color and 256-gradation grayscale images with a quality of 40 ~ 9600 dpi can be read into a computer.
PC Fax *1
By connecting this machine to a computer, a fax can be transmitted from the included MultiPASS Suite or from a Windows application, and a received image can be saved to the computer as-is without printing it out.
*1 MultiPASS F50 only
1-1
MultiPASS F50/F30 Chapter 1: General Description
2.1General Specification
|
Type |
|
Desktop |
|
|
Body colour |
|
Cool White |
|
|
|
|
|
|
|
Power source |
|
98 ~ 132V AC, 48 ~ 62 Hz |
|
|
|
|
|
|
|
Power consumption |
|
Standby 5.8 W |
|
|
|
|
Max. 39.6 W (when 100% black copy) |
|
|
|
|
|
|
|
Usage environment. |
|
50.0° F ~ 90.5° F (10° C ~ 32.5° C), 20% ~ 80% RH, 570 ~ 760 |
|
|
|
|
mmHg (760 ~ 1013 hPa) |
|
|
|
|
Horizontal |
±3° or less |
|
|
|
|
|
|
Operating noise |
|
Measured in accordance with ISO standards |
|
|
|
|
Operating |
:50 dB(A) or less |
|
|
|
||
|
Dimensions (W × D × H) |
17.32" × 20.59" × 8.89" (440 mm × 523 × 228 mm) MultiPASS |
||
|
|
|
F30 |
|
|
|
|
17.32" × 20.59" × 11.85" (440 mm × 523 × 301 mm) MultiPASS |
|
|
|
|
F50 |
|
|
|
|
(Not including trays) |
|
|
|
|
|
|
|
Weight |
|
22.05 lbs (10.0 kg) |
MultiPASS F30 |
|
|
|
27.34 lbs (12.4 kg) |
MultiPASS F50 |
|
|
|
(Not including trays) |
|
|
|
|||
2.2 Communication Specification (MultiPASS F50 only) |
||||
|
|
|
|
|
|
Applicable lines |
|
PSTN (Public Switched Telephone Network) |
|
|
|
|
|
|
|
Applicable Services |
|
DRPD (Distinctive Ring Pattern Detection) |
|
|
|
|
|
|
|
Handset |
|
None |
|
|
|
|
|
|
|
Transmission method |
|
Half-duplex |
|
|
|
|
||
|
Transmission control protocol |
ITU-T T30 binary protocol/ECM protocol/ |
||
|
|
|
ITU-T V.8 protocol/V.34 protocol/ECM protocol |
|
|
|
|
|
|
|
Modulation method |
|
|
|
|
G3 image signals |
ITU-T V.27ter (2.4k, 4.8k bps) |
||
|
|
|
ITU-T V.29 (7.2k, 9.6k bps) |
|
|
|
|
ITU-T V.17 (TC7.2k, TC9.6k, 12k, 14.4k bps) |
|
|
|
|
ITU-T V.34 (2.4k, 4.8k, 7.2k, 9.6k, 12k, 14.4k, 16.8k, 19.2k, |
|
|
|
|
21.6k, 24k, 26.4k, 28.8k, 31.2k, 33.6k bps) |
|
|
G3 procedure signals |
ITU-T V.21 (No.2) (300bps) |
||
|
|
|
ITU-T V.8 300bps |
|
|
|
|
ITU-T V.34 600 bps, 1200 bps |
|
|
|
|
(With automatic fallback function) |
|
|
|
|
||
|
Coding |
Black/white ITU-T T.4 Coding method (MH, MR) |
||
|
|
|
ITU-T T.6 Coding method (MMR) |
|
|
|
|
ITU-T T.82/T.85 Coding method (JBIG) |
|
|
|
Color |
ITU-T T.81 Coding method (JPEG) |
|
|
|
|
|
|
|
Error correction |
|
ITU-T T30 (ECM) |
|
|
|
|
|
|
1-2
MultiPASS F50/F30 Chapter 1: General Description
Time required for transmission protocol |
|
|
||
|
|
Pre-message |
Post-message |
Post-message *3 |
|
Protocol |
Protocol *1 |
Protocol *2 |
|
|
Mode |
|
(between pages) |
(after pages) |
|
|
|
|
|
|
G3 standard |
approx.18 sec. |
approx.4 sec. |
approx.4 sec. |
|
V.8/V.34 |
approx.8 sec. |
approx.2 sec. |
approx.2 sec. |
*1 Time from when other facsimile is connected to the line until image transmission begins.
*2 Post-message (between pages): Time from after one document has been sent until transmission of the next document starts if several pages are transmitted.
*3 Post-message (after last pages): Time from after image transmission is completed until line is switched from facsimile to telephone.
Minimum transmission time |
10 msec (G3), 0 msec (G3, ECM) |
Transmission output level |
From 0 to -15 dBm |
|
|
Receive input level |
From -3 to -43 dBm |
|
|
Modem IC |
FM336 |
|
|
2.3 Color Communication Specification (MultiPASS F50 only)
ITU-T recommendation |
ITU-T T.30 |
ANNEX E (JPEG Color Fax) |
|
T.4 ANNEX E (JPEG Header) |
|
|
T.42 (Color space for Color Fax) |
|
|
T.81 |
(JPEG) |
Scanning Document size |
A4 |
|
Printing paper size |
A4 |
|
Resolution |
200×200 dpi |
|
Picture element |
8 bit |
|
Coding |
JPEG |
|
Color space |
CIELAB |
|
Illuminant Data |
CIE Standard Illuminant D50 |
|
Sub sample |
4:1:1 (=Lab) |
|
1-3
MultiPASS F50/F30 Chapter 1: General Description
2.4 Scanner Specification
Type |
Book |
|
|
Sheet (MultiPASS F50 only) |
|
|
|
|
ADF capacity |
Max. 30 sheets (A4/Letter) |
|
|
Max. 10 sheets (Legal) |
|
|
|
|
Effective scanning width |
Letter/Legal |
8.42" (214 mm) |
|
A4 |
8.19" (208 mm) |
|
|
|
Scanning method |
Contact Image sensor scanning method |
|
|
|
|
Scanning resolution |
600 × 1200 dpi |
|
Scanning speed |
|
|
|
|
Mode |
Line density |
Scanning speed |
|
|
|
|
|
Text |
30~150 dpi |
5 second/page |
|
|
151~300 dpi |
5 second/page |
|
|
301~600 dpi |
5 second/page |
|
Gray scale |
30~150 dpi |
5 second/page |
|
|
151~300 dpi |
5 second/page |
|
|
301~600 dpi |
5 second/page |
|
Full color |
30~150 dpi |
15 second/page |
|
|
151~300 dpi |
15 second/page |
|
|
301~600 dpi |
15 second/page |
Scanner gradations |
Grayscale; |
8 bit, 256 gradations |
|
Color; |
R,G,B (8 bits each) full color capability |
|
|
|
TWAIN |
Yes |
|
|
|
|
Scanning density adjustment |
3 density level |
|
|
|
|
Image modes |
Halftone (PHOTO mode) |
|
|
|
|
Halftone (fax and copy) |
64-gradation error diffusion system (UHQ) |
|
|
|
|
Prescan |
Yes |
|
1-4
|
|
|
|
|
|
|
MultiPASS F50/F30 Chapter 1: General Description |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Scanning range |
|
|
|
|
|
|
|
|
|
||||||
Sheet dimensions (W × L) |
|
|
|
|
|
|
|
|
|
||||||
MultiPASS F50 |
|
|
|
|
|
|
|
|
|
||||||
ADF Maximum |
8.50" × 39.3" (216 mm × 1000 mm) |
||||||||||||||
ADF Minimum |
4.13" × 5.83" (105 mm × 148 mm) |
||||||||||||||
Document glass |
8.5" × 11.7" (216 mm × 297 mm) |
||||||||||||||
MultiPASS F30 |
|
|
|
|
|
|
|
|
|
||||||
Document glass |
8.5" × 14.0" (216 mm × 356 mm) |
||||||||||||||
Thickness |
|
|
|
|
|
|
|
|
|
||||||
ADF |
0.002" ~ 0.005" (0.06mm ~ 0.13 mm) |
||||||||||||||
|
|
|
|
|
|
|
50~90 g/m2 |
||||||||
Document glass |
0.79" (20 mm) |
||||||||||||||
|
|
|
|
|
|
|
MAX. 0.16" (MAX. 4.0 mm) |
||||||||
|
MAX. 0.16" |
COLOR FAX: MAX. 0.24"** |
|||||||||||||
|
(MAX. 4.0 mm) |
(MAX. 6.0 mm) |
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MAX. 0.18" (MAX. 4.5 mm)
Letter/Legal*/A4
MAX. 0.18" (MAX. 4.5 mm)
* When using legal-size documents with the MultiPASS F50, load them into the ADF. **MultiPASS F50 only
Figure 1-1 Scanning Range
Document scanning width “A4/LTR” is set in service data #1 SSSW SW06, bit4.
NOTE
1-5
MultiPASS F50/F30 Chapter 1: General Description
2.5 Printer Specification
Printing method |
Bubble-jet ink on-demand |
|
BJ Cartridge |
|
|
Structure |
Detachable ink tanks for each color and BK/Cl (C, M, Y) integrated |
|
|
head |
|
Head |
BK: 320 nozzles, 2-column vertical array |
|
|
Cl: 256 nozzles/color, 2-column vertical array/color |
|
Ink colors |
Pigment BK, dyes C, M, Y |
|
Ink tanks |
BCI-3eBK, BCI-3eC, BCI-3eM, BCI-3eY |
|
Weight |
BK: 32 g Cl (C, M, Y): 11 g |
|
|
|
|
Ink Tank |
|
|
Products name |
BCI-3BeK/BCI-3eC/BCI-3eM/BCI-3eY |
|
Product code |
F473131 / F473141/ F473151/ F473161 |
|
Weight |
32g (BCI-3eBK)/11g (others) |
|
|
|
|
Ink detection |
Optical LOW-Ink sense |
|
|
|
|
Printing speed |
Black |
Approx. 17 pages/minute (in case of character print) |
|
Color |
Approx. 12 page/minute |
|
|
|
Printing resolution |
2400 dpi × 1200 dpi |
|
Paper output tray stacking |
Approx. 50 sheets (when using the recommended paper) |
|
|
|
|
Paper tray |
|
|
Paper supply method |
ASF (Auto Sheet Feeder) |
|
Number of paper tray |
1tray : Legal/Letter/A4 (Universal) |
|
Paper capacity |
Max. 0.40" (10 mm) thickness |
|
|
plain paper (Approx. 100 sheets) |
|
Weight |
64 ~ 105 g/m2 |
|
Recommended paper |
|
|
Canon Copier LTR/LGL Premium Paper |
|
|
Weight |
75 g/m2 |
|
Paper size |
Letter, Legal |
|
Manufactured by |
BOISE CASCADE |
|
PLOVER BOND |
|
|
Weight |
75 g/m2, 90 g/m2 |
|
Paper size |
Letter |
|
Manufactured by |
FOX RIVER |
|
XEROX 4024 |
|
|
Weight |
75 g/m2, 90 g/m2 |
|
Paper size |
Letter, Legal |
|
Manufactured by |
XEROX |
|
|
|
|
1-6
MultiPASS F50/F30 Chapter 1: General Description
Printing range (Black & White FAX)
Paper dimensions (W × L) |
|
|
|
|
|
|
||
Letter |
|
8.50" × 10.98" (216 mm × 279 mm) |
||||||
Legal |
|
8.50" × 14.02" (216 mm × 356 mm) |
||||||
A4 |
|
8.27" × 11.69" (210 mm × 297 mm) |
||||||
Paper leading edge |
|
|
|
|
||||
|
|
2 |
|
1 |
|
3 |
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PRINTING DROP OUT RANGE 4
PRINTING RANGE
|
|
|
|
5 |
|
|
|
|
|
|
|
|
|
|
|
|
Paper trailing edge |
|
|
|
|
|
|
|
Figure 1-2 Printing Range |
|
|||||
Item |
A4 |
Letter |
Legal |
||||
|
|
|
|
||||
1 Effective printing width |
8.00" |
8.00" |
8.00" |
||||
|
(203.2 mm) |
(203.2 mm) |
(203.2 mm) |
||||
2 Left margin |
0.13"±0.06" |
0.25"±0.06" |
0.25"±0.06" |
||||
|
(3.4±1.5 mm) |
(6.4±1.5 mm) |
(6.4±1.5 mm) |
||||
3 Right margin |
0.13"±0.06" |
0.25"±0.06" |
0.25"±0.06" |
||||
|
(3.4±1.5 mm) |
(6.4±1.5 mm) |
(6.4±1.5 mm) |
||||
4 Top margin |
0.12"±0.06" |
0.12"±0.06" |
0.12"±0.06" |
||||
|
(3.0±1.5 mm) |
(3.0±1.5 mm) |
(3.0±1.5 mm) |
||||
5 Bottom margin |
0.20"±0.12" |
0.20"±0.12" |
0.20"±0.12" |
||||
|
(5.0±3.0 mm) |
(5.0±3.0 mm) |
(5.0±3.0 mm) |
Units are inches with mm shown in parentheses.
• The shaded area is included in the left and right margin errors of the paper trailing edge.
• The printing range is set in user data “PRINTER SETTINGS”, “PAPER SIZE”.
NOTE
1-7
MultiPASS F50/F30 Chapter 1: General Description
Printing range (Color FAX & Printer mode)
Plain paper and Special media (Color FAX & Printer mode)
W |
L = Min. 7.17 |
10.12 inch(182 |
257 mm) |
|
|
|
|
|||
|
|
Max. 8.5 |
14.0 inch(216 |
356 mm) |
|
|
|
|
||
|
|
|
|
|
|
W |
|
Feed direction |
|
|
|
|
|
|
c |
|
|
|
|
|
|
|
|
|
|
|
d |
|
|
|
|
|
|
|
|
a |
|
|
e |
|
a = (Plain paper , etc.) |
d = (A4) |
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
0.12 inch/3.0 mm |
|
0.13 inch/3.4 mm |
|
|
|
|
|
|
|
|
|
|
(LTR, LGL) |
|
|
|
|
|
|
|
|
b = 0.20 inch |
|
0.25 inch/6.3 mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5 mm |
e = 1.26 inch/32.0 mm |
|
|
|
|
|
|
|
|
L |
c = (A4) |
|
|
|
|
|
|
|
|
|
0.13 inch/3.4 mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(LTR, LGL) |
f = |
(0.91 inch/23.0 mm |
|
|
|
|
|
|
|
|
0.25 inch/6.4 mm |
|
|
|
|
|
b |
|
|
f |
|
: Recommended printing area |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
: Printable area |
||
|
|
|
|
|
|
|
|
(contains recomended printing |
||
Envelopes |
|
|
|
|
|
|
|
|
||
W |
L = |
(COM #10) |
|
|
|
|
|
|
||
|
|
9.48 |
4.17 inch(241 |
106 mm) |
|
|
|
|
||
|
|
(DL) |
|
|
|
|
|
|
|
|
|
|
8.66 |
4.33 inch(220 |
110 mm) |
|
|
|
|
||
|
|
|
|
b |
|
a |
|
|
|
|
|
|
|
|
|
|
c |
|
|
|
|
|
|
|
|
|
|
|
|
|
a = |
0.13 inch/3.4 mm |
|
|
|
|
|
|
|
|
|
b = |
0.13 inch/3.4 mm |
|
|
|
|
|
|
|
|
Feed direction |
c = |
0.12 inch/3.0 mm |
|
|
|
|
|
|
W |
|
d = |
1.04 inch/26.5 mm |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
d |
|
|
|
|
|
|
|
|
|
|
L |
|
|
|
|
|
|
|
|
|
|
Figure 1-3 Printing Range (1) |
|
|
1-8
MultiPASS F50/F30 Chapter 1: General Description
c
Banner paper
a
1 |
2 |
3 |
4 |
5 |
6 |
|
|
|
|
|
|
b
Max.6 folds (To be cut at the edge of the 7th fold)
a=0.25inch / 6.3mm b=0.25inch / 6.4mm c=1.10inch / 28mm
Figure 1-4 Printing Range (2)
2.6 Copy Specification
Color copy |
Yes |
|
|
Multiple copy |
99 copies |
|
|
|
|
|
|
Copy mode |
|
|
|
|
Black & white |
DRAFT, TEXT, PHOTO |
|
|
Color |
FAST, NORMAL, FINE |
|
|
|
|
|
Copy resolution |
|
|
|
|
Scanning |
Black & white |
600 dpi × 600 dpi |
|
|
Color |
1200 dpi × 1200 dpi |
|
Printing |
Black & white |
600 dpi × 600 dpi |
|
|
Color |
1200 dpi × 1200 dpi |
|
|
|
|
Copy magnification ratio |
25~400% |
|
|
|
|
||
Fixed ratio |
A4 → LTR, LGL → LTR, 4 × 6 inch → LTR |
||
|
|
|
|
1-9
MultiPASS F50/F30 Chapter 1: General Description
2.7 Function
Dialling |
|
|
Manual dialling |
Numeric button |
|
Auto dialing |
Max. 120 digits |
|
|
One-touch:12, Coded speed:100, Numeric button:1 |
|
Group dial |
Max.111 locations |
|
Redial |
Numeric button redial function (Max. 120 digits) |
|
|
|
|
Transmission |
|
|
Broadcast transmission |
Max. 113 locations (One-touch:12, Coded speed:100, Numeric |
|
|
button:1) |
|
Delayed transmission |
Yes (PC Assisted) Max. 30 reservation |
|
Confidential Tx/Rx |
None |
|
Relay broadcasting originating |
None |
|
Relay broadcasting |
None |
|
|
|
|
Reception |
|
|
Dual Access |
|
Yes |
FAX/TEL switching |
|
Yes |
Method |
|
CNG, detection |
Message |
|
None |
Pseudo CI |
|
None |
Pseudo ring |
|
Yes |
Pseudo ringback tone |
|
Yes |
Reduction settings for reception |
|
Yes |
Automatic reduction of reception images |
Yes (100% ~ 70%) |
|
Built-in Answering machine |
|
None |
Answering machine connection |
|
Yes (Telephone answering priority type) |
Remote reception |
|
Yes (Remote ID method) |
Memory lock reception |
|
None |
Reception printing in reverse order |
None |
|
|
|
|
Polling |
|
|
Polling transmission |
|
None |
Polling reception |
|
None |
|
|
|
Extended copy function |
|
|
mirror |
|
Yes |
Image repeat |
|
Yes |
Entire document |
|
Yes |
|
|
|
1-10
|
|
MultiPASS F50/F30 Chapter 1: General Description |
|
|
|
|
|
|
|
|
|
|
Others |
|
|
|
Closed network |
None |
|
|
Direct mail prevention |
None |
|
|
Reception printing in reverse order |
None |
|
|
Memory box |
None |
|
|
Memory backup |
|
|
|
Backup contents |
Dial registration data, User data, Service data, Time |
|
|
Backup IC |
256 kbit SRAM for control |
|
|
Backup device |
Lithium battery 3.0V DC/220 mAh |
|
|
Battery life |
Approx. 5 years |
|
|
Image data backup |
None |
|
|
Image Memory |
Approx. 4.3 MB |
|
|
Activity management |
Yes |
|
|
a) User report |
|
|
Activity management report (Every 20 transactions : always transmission and reception together) Activity report (sending/receiving)
One-touch speed dialling list Coded speed dialling list Group dialling list
Memory clear list User’s data list Document memory list Multi activity report
b) Service report
System data list System dump list Error list
Transmitting terminal identification |
Yes |
Time |
|
Management data |
Year/month/date/day/hour/minute (24 hour display) |
Precision |
±90 sec per month |
Display |
2 row × 20 digits |
Completion stamp |
None |
Program button |
None |
Hook button |
Yes |
Telephone exchange function |
None |
Speaker phone |
None |
Demo print function |
None |
HELP function |
None |
|
|
1-11
MultiPASS F50/F30 Chapter 1: General Description
3.1External View
Front View
ADF (AUTOMATIC DOCUMENT FEEDER)*
Holds documents for copying, scanning and sending faxes and feeds them automatically into the machine.
FEEDER |
DOCUMENT GUIDES |
COVER |
Adjust to the width of the document. |
MULTI-PURPOSE TRAY and TRAY COVER
Holds plain paper and other print media.
|
DOCUMENT OUTPUT SLOT |
|
Documents come out here. |
|
PLATEN GLASS COVER |
|
Open to place a document on the platen glass. |
|
SCANNING UNIT |
|
Lift up to install the Printhead (Cartridge) and |
|
Ink Tanks. |
|
OPEN BUTTON |
|
Push to lift up the scanning unit. |
OPERATION PANEL |
OUTPUT TRAY |
Controls the machine. |
Holds printed pages as they exit the machine. |
PLATEN GLASS
* F50 model only
Inside View
HOLDER
PAPER THICKNESS LEVER
Adjusts the gap between the printhead and the surface of the printing paper. Set the paper thickness lever to the left when loading paper other than envelopes, Banner Paper, and T-Shirt Transfers.
Figure 1-5 External View
1-12
MultiPASS F50/F30 Chapter 1: General Description
3.2 Operation Panel
Operation Panel
ON/OFF Button
Turns the machine on/off.
Resume Button
Resumes sending or receiving faxes after an error is corrected. Also ejects a jammed document from the ADF.
LCD
Displays messages and prompts during operation. Also displays selections, text and numbers when setting information.
In Use/Memory Light
Blinks when the machine is using the telephone line. Lights when there are documents in memory.
Alarm Light
Flashes when an error occurs, or when the machine is out of paper or ink.
Copy Fax
In Use/ Memory |
Alarm |
ON/OFF Resume |
Enlarge/ |
Reduce |
ABC DEF
|
Paper Select |
1 |
2 |
3 |
|
|
GHI |
JKL |
MNO |
Menu |
Exposure |
4 |
5 |
6 |
Set |
|
|
|
|
|
PRS |
TUV |
WXY |
|
|
|
|||
|
Image Quality |
7 |
8 |
9 |
|
|
|
|
|
|
|
|
OPER |
SYMBOLS |
|
|
|
0 |
|
|
|
Tone |
|
|
Fax Button* |
Color/B&W Button |
Switches standby |
Sets the machine for color or |
display to Fax Mode. black & white transmission. For color transmission, press this button to turn on its light.
Scan
Color /B&W
Stop/Reset |
01 |
02 |
03 |
04 |
Redial/Pause |
|
|
|
|
|
|
|
|
|
|
05 |
06 |
07 |
08 |
|
Coded Dial |
|
|
|
Start |
09 |
10 |
11 |
12 |
|
Hook
→ Next page*
Exposure Button
Adjusts the scan exposure for sending faxes.
Set Button
Selects and confirms the settings.
Numeric Buttons
Enter numbers when dialing or registering fax/telephone numbers. Also enter characters when registering names.
Tone Button
Connects to information services that accept tone dialing only, even if you are using a rotary pulse.
Stop/Reset Button
Cancels sending/receiving faxes and other operations, and returns the machine to standby mode.
Start Button
Starts sending or receiving faxes.
Image Quality Button
Selects the resolution setting that the machine uses to scan for sending faxes.
(-), (+)(Menu) Buttons
Scroll through the selection so you can see other selections. Also clears entry, and enters a space between letters and numbers. (+)(Menu) button also has a
function to show the menu that customizes the way your machine operates.
* MultiPASS F50 only
Figure 1-6 Operation Panel (1)
1-13
MultiPASS F50/F30 Chapter 1: General Description
01 |
02 |
03 |
04 |
Redial/Pause |
|
|
|
05 |
06 |
07 |
08 |
Coded Dial |
|
|
|
09 |
10 |
11 |
12 |
Hook |
Hook Button |
One-Touch Speed Dial Buttons |
Engages or disengages the |
Dial fax/telephone numbers pre-registered |
telephone line. |
for one-touch speed dialing. |
Coded Dial Button
Press this button and a two-digit code to dial a pre-registered fax/telephone number or group.
Redial/Pause Button
Redials the last number that was dialed with the numeric buttons. Also enters pauses between or after
the fax/telephone number when dialing or registering numbers.
Figure 1-7 Operation Panel (2)
1-14
MultiPASS F50/F30 Chapter 1: General Description
Guidelines for Entering Numbers, Letters, and Symbols
When you come to a step that requires you to enter a name or number, refer to the table below to determine which numeric button to press for the character you want:
• If you pause for more than 60 seconds between entering data, the machine will
automatically return to standby mode.
NOTE
Figure 1-8 Operation Panel (3)
1-15
MultiPASS F50/F30 Chapter 1: General Description
3.3Consumables
3.3.1BJ cartridge and ink cartridge
Guidelines for Entering Numbers, Letters, and Symbols
• For optimum printing results and to avoid printing problems, Canon recommends that you only use the Canon Ink Tanks described in this guide.
NOTE
There are four Ink Tanks: Black, cyan, magenta, and yellow.
Ink |
Tank |
BCI- |
|
3eBK |
Ink |
Tank |
BCI- |
|
3eC |
Ink |
Tank |
BCI- |
|
3eM |
Ink |
Tank |
BCI- |
|
3eY |
Ink Tank |
Ink Tank |
Ink Tank |
Ink Tank |
BCI-3eBK |
BCI-3eC |
BCI-3eM |
BCI-3eY |
YELLOW INK TANK (BCI-3eY)
MAGENTA INK TANK (BCI-3eM)
CYAN INK TANK (BCI-3eC)
BLACK INK TANK (BCI-3eBK)
Figure 1-9 Consumables (1)
1-16
MultiPASS F50/F30 Chapter 1: General Description
3.3.2 Print media
Description of print media
■Plain Paper
The machine supports letter-, legal-, and A4-size paper in portrait orientation. You can use regular copier paper, cotton bond paper, or typical letterhead. Your machine does not require special ink jet paper. Always use paper without curls, folds, staples, or damaged edges. Look at the label on the package to see if the paper has a preferred side for printing.
■Envelopes
The machine can print on U.S. Commercial No. 10 and European DL envelopes. You may be able to load other sizes, but Canon cannot guarantee consistent performance on these.
Do not use the following types of envelopes since they may cause problems:
•Envelopes with windows, holes, perforations, cutouts, and double flaps.
•Envelopes made with special coated paper or deeply embossed paper.
•Envelopes with peel-off sealing strips.
•Envelopes with letters enclosed.
■Glossy Photo Paper GP-301
A high gloss, thick paper that produces the look and feel of a photograph.
■Banner Paper BP-101
Specifically designed for printing one continuous sheet in a banner format. The connected sheets are divided by perforations and you can print from two to six sheets at a time.
■High Resolution Paper HR-101/HR-101N
Designed to produce near-photographic quality print output with sharp and vivid graphics.
■Bubble Jet Paper LC-301
Developed for high quality printing with minimal or no smearing when in contact with water or damp surfaces. This specially coated paper produces bright and vivid colors and stands up to normal office highlighters.
■Transparencies CF-102
Produce excellent contrast, sharpness, and color, creating crisp and professional overhead presentations.
Do not use normal transparencies in the machine as they do not absorb ink and may cause ink to run.
■High Gloss Photo Film HG-201
A bright white finish film that lends striking visual power to charts, graphs, and photographic images. It creates a sharper and more vivid color output than is possible with coated paper.
■Glossy Photo Cards FM-101
Made from the same stock as Glossy Photo Paper, these cards allow you to print images over the entire area of the card. Print the image so that it extends beyond the perforations and then trim off the unwanted white margins.
1-17
MultiPASS F50/F30 Chapter 1: General Description
■Photo Paper Pro PR-101/ PC-101S
Photo Paper Pro PR-101 is thick paper with a treated surface that enhances gloss and provides superior color reproduction. It is ideal for printing high quality photographs.
Photo Paper Pro PC-101S is made of the same material as Photo Paper Pro PR-101, this photo-size paper is intended for printing images that cover the entire surface of the card, without a white border. To take full advantage of PC-101S, make the images slightly larger than the area indicated by the perforations. This paper is ideal for printing high quality photographs.
■T-Shirt Transfers TR-201
This paper is used to produce iron-on transfers.
1-18
Chapter 2
Technical
Reference
MultiPASS F50/F30 Chapter 2: Technical Reference
1.1Parts Layout
The parts layout of this machine consists of the scanning assembly, printing assembly and printer.
U-turn roller
Document pickup roller Document feed motor
Separation roller
Document feed roller
Document eject roller
Contact sensor drive motor
Pick up roller
Paper feed motor
Carriage belt
Carriage motor
Contact sensor drive belt
Paper eject roller
Paper feed roller
Figure 2-1 Mechanical Layout
2-1