Canon BJ-20, BJ-5, BJ-10E, BJ-130, BJ-130E User Manual

...
0 (0)

BJ-20

USER’S

MANUAL

Canon

Table of Contents

Chapter 1 Introduction

How to Use This Manual

Features

Precautions

Chapter 2 Getting Started

Identifying the Parts

Checking the Package Contents

Installing the BJ Cartridge

Connecting to an AC Outlet

Cleaning the Print Head

Testing the Printer

Connecting to Your Personal Computer

Setting of Your Software for the BJ-20

Testing the Whole System

Additional Information

Installing the Battery Pack (Optional)

Checklist for Routine Operation

Traveling with the Printer

Chapter 3 Paper

Handling Paper

Paper Requirements Loading Standard Paper

Loading Envelopes, Transparencies, or Thick Paper

Using the Auto Sheet Feeder

Installing the Feeder Loading Standard Paper

Loading Envelopes, Transparencies, or Thick Paper

Chapter 4 Printer Settings

Changing the Printer Settings

From the Control Panel

From Your Software

From the DIP Switches

Choosing Between Print Quality and Speed

Selecting High Speed

Selecting High Quality

Selecting Printer Emulation

From the Control Panel

From the DIP Switches

Printing Text

Selecting National Character Set

Changing Character Pitch

Changing Print Style

Using Fonts

Miscellaneous Printer Settings

Doing a Hexadecimal Dump

Chapter 5 Printer Control Codes

Main Control Codes

In BJ-l0e Mode

In LQ Mode

Chapter 6 Maintenance

Recharging the Battery Pack

Replacing the BJ Cartridge

Cleaning the Print Head

Cleaning the Printer Cabinet

Storing and Transporting the

Printer

Chapter 7 Troubleshooting

Errors Displayed Via Indicators

Diagnosis Chart

Low Battery

Errors Not Displayed Via Any Indicator

Incorrect Paper Feed

Poor Print Quality

Incorrect Printing

Paper Jams

Paper Fed from the Top Cover

Paper Fed from the Bottom Slot

Paper Fed from the ASF

Appendix A: Printer Control Codes Summary

Appendix B: Code Pages and Character Sets

Appendix C: Default Settings

Appendix D: Options and Supplies

Appendix E: Specifications

Glossary

Index

This manual is provided for information purposes only. All information included herein is subject to change without notice. Canon is not responsible for any damages, direct or indirect, arising from or related to use of this manual.

©1992 Canon Inc. All rights reserved. Printed in Japan

Trademark Notice:

EPSON LQ5 1 t) is a trademark of Epson America, Inc.

IBM PC and Proprinter X24E are trademarks of International Business Machines Corporation. Lotus 1-2-3 is a trademark of the Lotus Development Corporation.

WordPerfect is a trademark of WordPerfect Corporation.

Professional Write and PFS: First Choice are trademarks of Software Publishing Corporation. Multi Mate Advantage II is a trademark of Borland International, Inc.

Chapter 1 Introduction

How to Use This Manual

This manual describes how to set up and operate the BJ-20, a portable printer from Canon.

Chapter 2 is recommended for all users. It provides step-by-step instructions on setting up the BJ-20 for basic printing. When you finish this chapter, you should be able to begin your productive work. If any printer problems occur, see the "Troubleshooting" section.

The rest of the manual can be used in any order. As you gain experience you can read the appropriate topic to customize the printer to your particular needs.

The overview diagrams on pages 10 to 13 contain page indications for quick retrieval of information.

If you need to travel with the printer, see page 38.

Conventions

The following symbols are used in this manual to help you operate the printer correctly and safely.

Caution Means serious damage may occur to your hardware or software.

Note

Gives useful advice or suggestions to raise the performance or

 

reliability of your hardware and software.

Features

The BJ-20 is a portable printer designed around Canon's proprietary bubble-jet printing technology. Amongst others, it has the following major features:

Portable

The BJ-20 fits easily into a briefcase. The rechargeable battery pack (optional) extends your ability to use it where AC power is not accessible.

Low Noise Level

With noise level as low as 45 decibels (dBA), the BJ-20 allows you to print even in an open-office environment.

Laser Printer-like Print Quality

The 360-dpi resolution gives you output quality of a laser printer - but at a much lower cost. This means bringing presentation output capability on the road.

Easy Maintenance

The BJ cartridge contains both ink and a print head. When the ink runs out, simply replace the whole cartridge with a new one.

Flexible Control

You can control the BJ-20 from the control panel, the DIP switches, or your software programs.

Precautions

On electricity

Use an appropriate power supply voltage and frequency. (Since the AC adapter is intended to be used only for local power supply, it cannot be used in overseas.)

USA/Canadian

AC 120 V 60

model:

Hz

UK/Australian model: ACHz 240 V 50

European model:

AC 230 V 50

Hz

Use only the AC adapter provided. Using other AC adapters will cause damage to the printer. (in case of trouble such as smoke, odd smells, or noise, disconnect the adapter from the outlet, do not place obstacles in front of the outlet.

Do not unplug the power cable to turn off the printer. The print head will not be properly capped.

After turning the power off, always wait for 4 seconds or more before turning it back on again.

On operating environments

Operate the printer only in the following environments:

Operating

5°C to 35°C

temperature:

(41°F to 95°F)

Relative humidity:

10% to 90% RH

 

(no

 

condensation)

Place the printer on a level surface.

If the printer is placed near a window, use a blind or curtain to protect the printer from direct sunlight.

Do not leave the printer in a vehicle because the temperature can suddenly rise.

Do not install the printer near devices which contain magnets or generate magnetic fields.

Do not subject the printer to strong physical shock or vibration.

Keep the printer clean. Accumulation of dust can prevent the printer from operating properly.

Do not place objects on top of the printer.

Do not remove the BJ cartridge from the printer until it has to be replaced. The print head will dry out if continually exposed to the air.

Chapter Getting

2 Started

Identifying the Parts

Front

Inside

Control Panel

Rear

Checking the Package Contents

Make sure the following items are in the package:

Notes

AC adapter may differ, depending on the country of purchase. Read the BJ cartridge instruction sheet together with this manual.

Installing the BJ Cartridge

The BJ cartridge contains ink and a print head for printing. Each cartridge can print about 700,000 characters approximately.

Before using a new BJ cartridge, perform the head cleaning operation first, otherwise, it may print poorly or not print at all. (For details, see page 21 on "Cleaning the Print Head")

1 Prepare the cartridge by the following the instruction sheet that comes with it.

2 Open the top cover, then the paper cover.

Canon BJ-20, BJ-5, BJ-10E, BJ-130, BJ-130E User Manual

3 Lift the lock lever on the carriage.

4 Fit the BJ cartridge slot over the bright yellow mounting base.

5 Push the lock lever down to lock the cartridge in place.

6 Close the paper cover.

Connecting to an AC Outlet

Before you start, check the voltage and frequency of the power source match the indication on the AC adapter label.

1 Connect the AC adapter cable to the printer.

Plug the adapter into a properly grounded AC outlet. The carriage moves 2 and the print head is recapped automatically.

Cautions

zUse only the supplied AC adapter. If, however, you plan to operate the printer in another country, check the voltage of the country and , if necessary, obtain the appropriate AC adapter (with the correct voltage) from a Canon authorized dealer in that country.

zThe supplied AC adapter is intended for indoor use only.

zTo avoid causing a short circuit, do not attach any metallic object to the connector on the AC adapter when the adapter is plugged into an electrical outlet.

zAlways turn off the printer when it is not in use.

zBefore unplugging the adapter, always turn off the printer first; otherwise the print head cannot be recapped correctly. If such mistake occurs, plug the adapter back into the AC outlet, then turn the printer on and off. Finally, unplug the adapter.

zWhenever the AC adapter is plugged into an electrical outlet, current flows inside the adapter. Therefore, unplug the adapter if the printer is not used for an extended period of time.

Cleaning the Print Head

To ensure good print quality, clean the print head whenever you install a new BJ cartridge.

Turn on the printer.

1 The POWER indicator and the ERROR indicator light.

2 Insert a sheet of paper (see loading standard paper page 45).

Press and hold down the LF/FF switch to form-feed (FF) the paper. 3 The paper advances to the position ready for printing.

4 Press the ON LINE switch to turn the printer online.

Press the FWD ADJ and REV ADJ switches simultaneously when the 5 printer is online. The buzzer sounds.

6 Immediately press the LF/FF switch before the buzzer sounds.

If the buzzer sounds before you could press the LF/FF switch, wait for the cleaning to finish, the start from step 6 again.

The cleaning process is carried out. When it is finished, the ON LINE 7 indicator lights and a check pattern is printed.

Examine the check pattern for print quality, and repeat steps 5 to 7 if the 8 output is not clear.

To eject paper, press the ON LINE switch to turn of the ON LINE indicator, and press and hold the LF/FF switch for one second.

If you wish to test the printer, turn off the printer. (The carriage returns to the home position and the print head is recapped automatically.)

Cautions

zDo not carry out the cleaning procedure unless it is necessary. Excessive cleaning wastes ink.

zTo set the head cleaning mode properly, press the FWD ADJ and REV ADJ switches when the carriage is stationary.

Notes

zYou can do the cleaning process without print the check pattern. To do so, just do step 6 when the printer is online; this will start the cleaning.

zPaper can be fed from the auto sheet feeder as well, See page 4 on loading paper from the feeder.

zThe print head cleaning process does not erase any data sitll remaining in the printer buffer.

zThe head cleaning can also be executed by turning the poer switch on while pressing the FWD ADJ and REV ADJ switches.

Testing the Printer

Now you can test to see whether the printer will print correctly or not. Make sure the printer is turned off.

Hold down the LF/FF switch. Then slide and release the power switch. The 1 POWER indicator and the ERROR indicator light.

When you hear a further 2 beeps, insert a sheet of paper (See loading 2 standard paper page 45).

Press the LF/FF switch.

3 The paper advances to the position ready for printing.

4

Press the ON LINE switch.

 

The printer starts printing a test page (Ripple Pattern Test).

5 A sample portion of the test page is shown below. If any printing problem occurs, see chapter 7 on troubleshooting.

Ripple Pattern Test in BJ-10e mode

6 Self-test is completed when a full page of the test pattern is printed.

To suspend the test before it ends.

Press the LF/FF switch. To resume, press the switch again. When the test is suspended (the ON LINE indicator blinking), you can, for example, press the ON LINE switch to turn the printer online; but if you do so, you cannot return to the test again, without starting from step again.

To quit the test before it ends.

zPress the ON LINE switch. To remove the paper, press the ON LINE switch to turn the printer offline, then press the

zLF/FF switch.

Notes

zIn step 1, if you hold down the PITCH switch (instead of the LF/FF switch), the printer will print a sample in each of the following pitch and style (All Modes Test) using courier font.

z HQ proportional

zHQ elite*

zHQ pica

zHQ double-high

zDraft elite

zDraft pica

zHQ double-wide

zDraft condensed

zDraft condensed subscript

zHQ emphasized elite*

zHQ emphasized pica

zWhen MODE 1 is selected (DIP SW 11 is off and 12 is off, IBM X24E emulation), the prestige font is used.

zWhen shipped, the printer is set to the BJ-10e mode (page 63). If you later change it to the LQ mode, the test page in the Ripple Pattern test will be printed in HQ prestige instead (See the Ripple Pattern test sample below). The All Modes Test, however, is not available in the LQ mode.

Ripple Pattern Test in LQ mode

Connecting to Your Personal Computer

The BJ-20 does not come with an interface cable, so you need to obtain an 8-bit, parallel cable for the connection.

1 Remove the interface connector cap from the printer.

Plug the appropriate end of the cable into the printer parallel interface 2 connector.

3 Snap the printer lock pins into position.

Connect the other end of the cable to the computer parallel interface 4 connector (also called parallel port) on the computer.

Note

If necessary, consult your computer manual for information on printer cable connection.

Setting of Your Software for the BJ-20

To print correctly, your software must know which brand printer and model it will print on. This is necessary because of printers do differ from one other.

Refer to the software manual for detailed procedure on the identification process. Below is an example on WordPerfect 5.1, which requires the use of its installation program.

Example

1 Turn on your computer and start the WordPerfect installation program.

2 Select "Printer" from the main menu. The printer selection menu appears.

3 Select Canon BJ-10e and exit the program. The identification process is completed.

If you cannot find Canon BJ-10e on the printer menu of your software, use the following table to choose the one that is closest, starting from the top.

Priority

Printer

Dip Switches Setting (page 68)

 

 

11

12

1

Canon BJ-10e

OFF

OFF

2

IBM Proprinter X24e or XL24e

OFF

OFF

3

IBM Proprinter X24 or XL24

OFF

OFF

4

Canon BJ-130e

ON

OFF

5

IBM Proprinter

OFF

OFF

6

IBM Graphics Printer

OFF

OFF

When shipped, the BJ-20 is set to emulate the Canon/IBM printers.

If you later change the emulation to LQ mode, use the following table to select the new emulation in the software.

Priority

Printer

Dip Switches Setting (page 68)

12

 

 

1

Epson LQ-510

ON

2

Epson LQ-850

ON

3

Epson LQ-500

ON

4

Epson LQ-2550

ON

5

Epson LQ-800

ON

If there is no LQ printer driver listed above on your printer menu, select the FX or MX draft printer driver.

Loading...
+ 80 hidden pages