MAKER’S WARRANTY
INBUILT MODELS
FITZPIB, FITZPIBLP
USER INSTRUCTIONS
INSTALLATION INSTRUCTIONS
SERVICE INSTRUCTIONS
Cannon
FITZROY PROFILE
This heater is approved for use with Natural and Propane gases. Please leave instructions with the owner
Contents
Contents |
2 |
Warranty |
3 |
|
|
Safety warnings |
4-5 |
|
|
What to do if you smell gas
Warnings
Standards
User instructions |
6-8 |
Operating instructions
Cleaning
Heater specifications |
9 |
Installation instructions |
10-14 |
|
|
Clearances
Fitment of cabinet depth spacer
Installation into a masonry fire place
Sealing
Gas connection |
15-16 |
Fuel bed & log installation |
|
Gas control |
17-18 |
|
|
Gas pressure point |
|
Gas pressure adjustment |
|
Service instructions |
19 |
|
|
General
To replace the gas control
To replace the fan
To replace the electronic controller
To remove the burner and electrodes
To check pressures
Trouble shooting |
19-22 |
Connections
Electrical wiring diagram
Authorised service agents |
22 |
2
Warranty
The Cannon appliance is warranted against defects in materials and workmanship for a period of one, (1) year from its date of original purchase, for residential use in Australia.
Warranty service, which includes parts and labour for the replacement or repair of defective parts, is available through Cannon Authorised Service Agencies. (Please refer to the list of authorised service agents in this manual.)
Consumers are responsible for service person’s travel outside normal service areas (approximately seventy (70k) radius from the nearest Cannon dealer’s location), local cartage, and normal maintenance as described in this manual.
Any product subjected to misuse, abuse, negligence, accident or alteration will have its warranty voided. The defacement of serial plate will have its warranty voided.
If installation is not carried out in accordance with manufacturer’s instructions, this warranty may be void.
The customer must keep their “Tax Invoice” as proof of purchase of this product and compliance certificate as proof of required installation.
Model number: ______________________________________
Serial number: _______________________________________
Date of manufacture: _________________________________
Date installed: _______________________________________
Compliance Certificate No: ____________________________
Designed, manufactured and distributed by:
Sampford and Staff Pty Ltd. 421 Smith Street
Fitzroy, Vic, 3065 Tel: (03) 9418 5888
Don’t risk your appliance warranty
Only a licensed person will give you a Compliance Certificate, showing that the work complies with all the relevant standards.
And only a licensed person will have insurance protecting their workmanship for 6 years.
So make sure you use a licensed person to install this appliance and ask for your Compliance Certificate to ensure the manufacturers appliance warranty will be honoured.
3
Safety Warnings
What to do if you smell gas
Warnings
Please read this manual before installing and using the heater.
1.Turn OFF the main gas supply.
2.Extinguish any open flame.
3.Open windows.
4.Do not touch electrical switches.
5.Do not use your telephone.
6.Call your gas supplier immediately from a neighbour’s phone.
1.Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to other sections of this manual for correct procedures, or consult with place of purchase, a licensed plumber, a gas supplier or service agent listed in this manual.
2.Due to high temperatures the room heater should be located out of traffic and away from:
•Furniture and draperies,
•Combustible materials,
•Gasoline and other flammable liquids,
Do not place clothing or other flammable material on or near the heater.
3.Keep curtains*, clothing, furniture and other flammable materials at least 900mm from front and sides of the heater.
*At the owner’s discretion curtain clearance can be less than 900mm as long as they are restrained from the front, top and sides of the heater. The manufacturer takes no responsibility if curtain clearance is less than 900mm and not restrained.
4.Children and adults should be alerted to the hazard of high surface temperature and should take care to avoid burns or clothing ignition.
This heater is not intended for use by young children or infirm persons without supervision.
Young children should be carefully supervised when they are in the same room as the heater.
Young children should be supervised to ensure that they do not play with the heater.
5.Never attempt to burn paper or any other material in the heater.
6.Do not spray aerosols in the vicinity of this appliance while it is in operation.
Do not place articles against, or store flammable materials near this appliance
4
Standards
7.If removed the glass window must be put back onto the unit prior to operating the heater.
8.Installation and repairs should be performed by a licensed service person only, refer to back of brochure for service number.
9.For installation into a non-combustible fireplace, i.e.: masonry or brick or into a mock fireplace, i.e. timber or plasterboard, the chimney and base should be of sound construction and be free from cracks and holes (to ensure that sufficient flue draught can be generated).
NOTE: WHEN INSTALLING INTO A MOCK FIREPLACE A MOCK FIREPLACE INSTALLATION KIT MUST BE USED.
10.The heater must be properly installed in a working chimney or connected to a venting system. Operation of this heater, when not connected into a working chimney or a properly installed and maintained venting system can result in carbon monoxide (CO) poisoning and possible death.
11.The appliance should be inspected prior to use, with regular inspections (annually) to be made by a licensed service person. It is important that circulating air passageways of the appliance be kept clean, dirt and lint free, for a safe and efficient operation of the heater.
12.On first lighting your heater a smell may occur due to it’s new condition. This is quite normal and will disappear after a few hours use at the maximum control position.
Important:
WHEN THIS HEATER IS OPERATING, THE MESH GUARD IS HOT.
The mesh safety guard fitted to the heater conforms to AGA requirements.
For heaters fitted with the optional glass front it should be noted that THE GLASS FRONT IS HOT.
For permanent protection of young children or the infirm a secondary guard should be placed around the heater. A secondary guard is not provided with this heater and may be purchased by the owner.
This appliance meets the following standards:
Standards Australia: AS 3100
AS 5601/AG 601
AS 4553/AG 103
5
User instructions
Operating instructions
1.Plug the power cord into the wall socket and turn on the power to the heater, see figure 1. Refrain from using an extension cord.
1
2. For control layout refer to figure 2
2
3. To turn heater on press switch to POWER ON position. There is a 5 second delay before the burner ignites. At this setting the burner is on LOW and the fan speed is on LOW. Refer figure 3.
The burner will ignite on both HIGH and LOW settings.
3
4. To turn burner to HIGH setting, press switch for HIGH setting. Refer figure 4.
4
6
5. To increase the fan speed to MED, press switch for MED setting. Refer figure 5.
5
6. To increase the fan speed to HIGH, press switch for HIGH setting. Refer figure 6.
6
7. To turn the burner to LOW setting, press switch for LOW setting. Refer figure 7.
On low burner setting it is more efficient to operate the fan speed on LOW.
8. If the burner fails to ignite, wait 20 seconds and repeat the ignition procedure. See below.
To turn burner OFF |
To turn burner ON |
7
User instructions continued
Cleaning. |
All cleaning should be carried out when the heater is cold. Nor- |
|
mally the heater should only need wiping with a lint - free damp |
|
cloth. Any stubborn stains can be removed with a non-abrasive |
|
spray on cleaner. If an abrasive cleaner is used the paint finish will |
|
be damaged. |
|
Internally the heater should only be cleaned by a licensed service |
|
person listed in this manual. |
|
If your heater requires attention contact your supplier or licensed |
|
service person listed in this manual. |
|
Important: |
|
The appliance should be inspected before use and at least annu- |
|
ally by an authorised service person. More frequent cleaning may |
|
be required due to excessive lint build-up from carpeting, bedding |
|
materials, pet hair, etc. |
|
It is imperative that control compartments, burners and circulating |
|
air passage ways of the appliance be kept clean. |
|
Do not use this fire if the glass is cracked or with the glass safety |
|
screen removed. |
8
Loading...