Candy CBWD 8514DC Instruction manual

0 (0)

Thank-you for choosing a Candy washing machine. We are confident it will loyally assist you in safely washing your clothes, even delicates, day after day.

You can register your product at www.registercandy.com to gain faster access to supplementary services solely reserved to our most loyal customers.

Carefully read this manual for correct and safe appliance use and for helpful tips on efficient maintenance.

Only use the washing machine after carefully reading these instructions. We recommend you always keep this manual on hand and in good condition for any future owners.

Please check that the appliance is delivered with this instruction manual, warranty certificate, service centre address and energy efficiency label. Also check that plugs, drain hose support hook and liquid detergent or bleach tray (only on some models) are included. We recommend you keep all these components.

On receipt of your appliance please check it carefully for damage. Any damage found must be reported to the delivery driver immediately. Alternatively damage found must be reported to the retailer within 2 days of receipt.

	Environmental conditions	EN
	This appliance is marked according to	EN
	This appliance is marked according to
	the European directive 2012/19/EU
	on Waste Electrical and Electronic
	Equipment (WEEE).
	WEEE contains both polluting substances (which
	can cause negative consequences for the
	environment) and basic components (which can
	be re-used). It is important to have WEEE
	subjected to specific treatments, in order to
	remove and dispose properly all pollutants, and
	recover and recycle all materials. Individuals can
	play an important role in ensuring that WEEE
	does not become an environmental issue; it is
	essential to follow some basic rules:

!WEEE should not be treated as household waste;

!WEEE should be handed over to the relevant collection points managed by the municipality or by registered companies. In many countries, for large WEEE, home collection could be present.

In many countries, when you buy a new appliance, the old one may be returned to the retailer who has to collect it free of charge on a one-to-one basis, as long as the equipment is of equivalent type and has the same functions as the supplied equipment.

Contents

1.GENERAL SAFETY RULES

2.INSTALLATION

3.PRACTICAL TIPS

Each product is identified by a unique 16character code, also called the “serial number”, printed on the sticker. This can be found inside the door opening. This code is a unique code for your product that you will need to register the product warranty, or if you need to contact the Customer Service Centre.

4.MAINTENANCE AND CLEANING

5.QUICK USER GUIDE

6.CONTROLS AND PROGRAMS

7.DRYING CYCLE

8.AUTOMATIC WASHING/DRYING CYCLE

9.THROUBLESHOOTING AND WARRANTY

1.GENERAL SAFETY RULES

!This appliances is intended to be used in household and similar applications such as:

-Staff kitchen areas in shops, offices and other working environments;

-Farm houses;

-By clients in hotels, motels and other residential type environments;

-Bed and breakfast type environments.

A different use of this appliance

from	household	environment
or	from typical	housekeeping

functions, as commercial use by expert or trained users, is excluded even in the above applications. If the appliance is used in a manner inconsistent with this it may reduce the life of the appliance and may void the manufacturer’s warranty.

Any damage to the appliance or other damage or loss arising through use that is not consistent with domestic or household use

(even if located in a domestic or household environment) shall not be accepted by the manufacturer to the fullest extent permitted by law.

!This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance

in a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

!Children should be supervised to ensure that they do not play with the appliance.

!Children of less than 3 years should be kept away unless continuously supervised.

!If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

!Only use the hose-sets supplied with the appliance for the water supply connection (do not reuse old hose-sets).

!Water pressure must be between 0.05 MPa and 0.8 MPa.

!Make sure carpets or rugs do not obstruct the base or any of the ventilation openings.

!The OFF condition is reached by placing the reference mark on the programmes control/knob in the vertical position. Any other different position of such control sets the machine in ON condition (only for models with programmes knob).

!The final part of a washer dryer cycle occurs without heat (cool down cycle) to ensure that the items are left at a temperature that ensures that the items will not be damaged.

WARNING:

never stop a washer dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated.

!After installation, the appliance must be positioned so that the plug is accessible.

!The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the washer dryer, in such way that a full opening of the washer dryer door is restricted.

!The maximum load capacity of dry clothes depends on the model used (see control panel).

!The appliance is not to be used if industrial chemicals have been used for cleaning.

!Do not dry unwashed items in the washer dryer.

!Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot water with an extra amount of detergent before being dried in the washer dryer.

!Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the washer dryer.

!Fabric softeners, or similar products, should be used as specified by the fabric softener instructions.

!Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as a washer dryer. The items become warm, causing an oxidation reaction in the oil,

Oxidation creates heat. If the heat cannot escape, items can become hot enough to catch fire. Piling, stacking or storing oil-effected items can prevent heat from escaping and so create a fire hazard.

!If it is unavoidable that fabrics contain vegetable or cooking oil or have been contaminated

by hair care products be placed in a washer dryer they should first be washed in hot water with extra detergent - this will reduce, but not eliminate, the hazard.

!Remove all objects from pockets such as lighters and matches.

!To consult the product technical specification please refer to the manufacturer website.

!Do not pull on the power cord or appliance to unplug the machine.

!Do not expose the washing machine to rain, direct sunlight or other weather elements.

Protect from possible freezing.

!When moving, do not lift the washing machine by the knobs or detergent drawer; during transport, never rest the door on the trolley. We recommend two people lift the washing machine.

Safety instructions

!Before cleaning or maintaining the washing machine, unplug the appliance and turn off the water tap.

!Make sure the electrical system is earthed. Otherwise, seek qualified professional assistance.

!Please do not use converters, multiple sockets or extension cords.

WARNING:

water may reach very high temperatures during the wash cycle.

!Make sure there is no water in the drum before opening the door.

!In the event of fault and/or malfunction, turn off the washing machine, close the water tap and do not tamper with the appliance.

Immediately contact the Customer Service Centre and only use original spare parts. Failure to observe these instruction may jeopardise appliance safety.

By placing the mark on this product, we are confirming compliance to all relevant European safety, health and environmental requirements which are applicable in legislation for this product.

2. INSTALLATION

!Release the power chord and drain hose from the securing clip at the rear of the machine.

!Remove the 2 or 4 transportation screws (A) on the back and remove the 2 or 4 flat washers, rubber bungs and plastic spacer tubes (B) as illustrated in figure 1.

!If the washing machine is built-in, unscrew the 3 or 4 transportation screws (A) and remove the 3 or 4 flat washers, rubber bungs and plastic spacer tubes (B).

!During the removal of the screws occasionally spacer tubes fall inside the product, these can be remove by tilting the product forward and recovering them from the floor or inside the base of the machine.

!Cover the open transportation screw holes with the 2 or 4 plastic caps included in the instruction bag.

WARNING:

keep packaging materials away from children.

Place the corrugated plastic sheet, found on top of the appliance during the unpacking process, into the base of the appliance as shown in figure 2 (according to the model, consider version A, B or C).

A A

BA B A

B B

A		3
1	2

Instructions for mounting the furniture door

!Position the template onto the

reverse of the furniture door. It is possible to mount the hinges

and closure magnet on the right or left-hand side depending on your requirements. Mark the screw hole positions, then drill

out these positions.

B C

!Fix the hinges in place with the 4 screws provided (A).

!Fix the magnet (B) in place using screw (C).

!Mount the plate (D) on the right or left-hand side, depending on your installation requirements.

Place the plastic support (E) under the plate and fix it in position with screw (F).

!Snap mount cap (G) in the lower position.

	D
F	E
	E
	G

!Mount the furniture door to the
front of the washer using the
hinges. Place the	spacers
under the hinges (I)	and then	H I
fix in position with screw (H).

We suggest mounting the furniture door so that it opens towards the left, which is the same direction as the porthole door. This will leave more space when you are loading washing into the appliance.

!Slide the washer into an opening of the size indicated in the diagram opposite. A furniture plinth may be run across the front of the appliance, but its height will be dictated by the height the washer is set at.

!The 4 adjustable feet allow the height of the washer to be adjusted from 820 mm to a maximum of 840 mm. To adjust the height, you should remove the nuts fitted to each foot and replace these with the 5 mm nuts supplied. Raise the feet to your desired height and then fully tighten the lock nut to the base of the washer.

	600	min.
		min.
208min.	600		825 min.
596	570

Hydraulic connections

!Connect the water hose to the water supply tap (fig. 3) only using the hose supplied with the appliance (do not reuse old hose-sets).

!Some models may include one or more of the following features:

!HOT&COLD (fig. 4):

water mains connection settings with hot and cold water for higher energy savings.

Connect the grey tube to the cold water tap and the red one to the hot water tap. The machine can be connected to the cold water tap only: in this case, some programs may start a few minutes later.

!AQUASTOP (fig. 5):

a device located on the supply tube that stops water flow if the tube deteriorates; in this case, a red mark will appear in the window “A” and the tube must be replaced. To unscrew the nut, press the one-way lock device "B".

!AQUAPROTECT – SUPPLY TUBE WITH GUARD (fig. 6):

Should water leak from the primary internal tube "A", the transparent containment sheath "B" will contain water to permit the washing cycle to complete. At the end of the cycle, contact the Customer Service Centre to replace the supply tube.

Setting

!The washing machine should be installed in its final position such that the water fill hose is not kinked or trapped. The corrugated drain hose should be inserted into suitable drain pipe of between 50 cm and 85 cm height above the floor using the curved drain hose support. If an under sink connection is used the drain hose must be routed above the sink overfill opening to prevent back siphoning. Care must be taken to avoid kinking or trapping the drain hose (fig. 7).

B	B

A A

min 4 cm

100cm	+2,6 mt	min 50 cm
max	max	min 50 cm
max		max 85 cm

+ 22 hidden pages