Air Tools
Spray Guns
Gravity-Feed Spray Gun |
DH7800 |
•Designed to provide optimal atomization and particle size
•Stainless fluid needle and nozzle are compatible with today’s advanced coatings
•600 milliliter acetal cup allows viewing of paint fluid level while providing chemical resistance and easy cleaning
•In-line 80 mesh filter removes dirt particles from paint, preventing defects
•Includes adjustable fluid, pattern and air controls
5.9AVG. SCFM Requirement @ 40 PSI
Gravity-Feed Touch-up Spray Gun |
DH7600 |
•Stainless steel fluid needle and nozzle for corrosion-resistant life
•In-line paint filter removes dirt particles from paint, preventing defects
•See-through cup allows viewing of paint fluid level
•Includes adjustable fluid, pattern and air controls
2.5AVG. SCFM Requirement @ 40 PSI
High Volume Low Pressure (HVLP)
Spray guns operate at lower air cap pressures than conventional spray guns (below 10 PSI). Atomized paint from an HVLP spray gun is delivered to the work surface at lower velocities than conventional spray guns, reducing bounceback and overspray. This results in a higher transfer efficiency of material, reducing paint consumption by 20-30%.
HVLP Gravity-Feed Spray Gun |
DH7900 |
•Designed to provide optimal atomization and particle size
•Stainless fluid needle and nozzle are compatible with today’s advanced coatings
•600 milliliter acetal cup allows viewing of paint fluid level while providing chemical resistance and easy cleaning
•In-line 80 mesh filter removes dirt particles from paint, preventing defects
• Includes adjustable fluid and pattern controls
6.2 AVG. SCFM Requirement @ 40 PSI
30 |
Visit us online: www.chpower.com |
|
|
|
|
Spray Guns
Why Use Spray Guns?
Spraying offers quality finishes on a consistent basis. Spray guns offer several advantages over wiping, brushing or rolling on a paint finish. These include speed, versatility, control, ease of repair, simplicity and consistency of application.
HVLP Gravity-Feed Touch-up Spray Gun DH7700
•Stainless steel fluid needle and nozzle for corrosion-resistant life
•HVLP increases transfer efficiency and reduces paint consumption
•In-line paint filter removes dirt particles from paint, preventing defects
•See-through chemical-resistant cup allows viewing of paint fluid level
•Includes adjustable fluid and pattern
controls
2.8 AVG. SCFM Requirement @ 40 PSI
Siphon-Feed Spray Gun |
DH6500 |
•Great choice in an economical spray gun
•Produces a fine finish for most automotive, furniture and equipment painting
•Pattern control adjusts fan size
•Includes 1 qt. anti-drip canister
7.0AVG. SCFM Requirement @ 40 PSI
Tools Air
Siphon-Feed Spray Gun |
DH7500 |
•Designed to provide optimal atomization and particle size
•Stainless fluid needle and nozzle are compatible with today’s advanced coatings
•Built-in air adjusting valve provides easy adjustment at tool
•Includes 1 qt. anti-drip canister
6.3AVG. SCFM Requirement @ 40 PSI
Model |
Fluid |
Fluid tip |
Paint Viscosity |
Adjustment Fan Pattern |
Canister |
|
No. |
Delivery Type |
(in./mm) |
Range |
Controls |
Size |
Size |
DH7800 |
Gravity |
.055/1.4 |
Low-Med. |
Pattern/Material/Air |
1.5-11 |
600 ml |
|
|
|
|
|
|
|
DH7600 |
Gravity |
.025/1.0 |
Low-Med. |
Pattern/Material/Air |
.75-6.0 |
5 oz. |
DH7900 |
Grav./HVLP |
.055/1.4 |
Low-Med. |
Pattern/Material |
1.5-10 |
600ml |
|
|
|
|
|
|
|
DH7700 |
Grav./HVLP |
.025/1.0 |
Low-Med. |
Pattern/Material |
.75-5.0 |
5 oz. |
DH6500 |
Siphon |
.071/1.8 |
Very Low-Med. |
Pattern/Material |
1.5-9.5 |
1 qt. |
|
|
|
|
|
|
|
DH7500 |
Siphon |
.071/1.8 |
Very Low-Med. |
Pattern/Material |
1-10 |
1 qt.. |
Or call CH Air Tools at: 1-800-543-6400 |
31 |
|