Package Contents
Model # |
CM-3000 |
CM-3010 |
CM-3020 |
|
CM-3030 |
CM-3040 |
CM-3050 |
|
CM-3100 |
CM-3110 |
CM-3120 |
Part |
CM-3130 |
CM-3140 |
CM-3150 |
|
|
|
|
Orange |
- |
1 |
1 |
Wire |
|
|
|
|
|
|
|
Blue |
1 |
- |
1 |
Wire |
|
|
|
|
|
|
|
Grey |
1 |
1 |
2 |
Wire |
|
|
|
|
|
|
|
In-line |
1 |
1 |
1 |
Resistor |
|
|
|
|
|
|
|
|
2 |
2 |
2 |
|
|
|
|
CM-3000 Series Illuminated Switches
Single Gang and Jamb Width
Installation Instructions
Description
CAMDEN DOOR CONTROLS CM- 3000 Series Exit Switches are heavy duty push-buttons designed for industrial and commercial applications, where illumination is required. Buttons are 1 5/8” (40mm) in diameter, and are available in red or green (other colors on request). The faceplate is 1/4” thick brushed aluminum, in 1 3/4” or 2 3/4” widths. Optional duranodic (US40) finish is also available.
CM-3000 Series switches utilize UL listed switch components. Finished models comply with UL61058 Standard for Switches. Rated 10 amps @ 30
VDC, either momentary or maintained operation.
Application
Camden illuminated Exit Switches are ideal for high traffic areas such as building front entrances and exits, as well as institutions, such as hospitals where an
illuminated button is required. They can be surface, flush, or mullion (narrow stile) mounted.
Camden Illuminated Exit switches are designed to control electric locks, electro-magnetic locks, electric strikes, automatic doors, and handicap operators. They may also be used for automatic
doors, shunting, bypassing alarms, request-to-exit, timed functions, and many other applications.
Installation
CM-3000, CM-3010, CM-3020, CM-3030, CM-3040 and CM-3050 are supplied with a brushed aluminum faceplate that can be easily mounted to a single gang electrical box.
CM-3100, CM-3110, CM-3120, CM-3130, CM-3140 and CM-3150 are supplied with 1-3/4” brushed aluminum faceplate for door jamb mounting.
Figure 1 shows the cutout required for door jamb mounting. |
Figure 1 - Door Jamb Cutout |
|