Camden Door Controls CM-3000-R, CM-3010-R, CM-3020-R, CM-3030-R, CM-3040-2 User Manual

...
0 (0)
Camden Door Controls CM-3000-R, CM-3010-R, CM-3020-R, CM-3030-R, CM-3040-2 User Manual
6-32x¾”
FLT HD
Screws

Package Contents

Model #

CM-3000

CM-3010

CM-3020

 

CM-3030

CM-3040

CM-3050

 

CM-3100

CM-3110

CM-3120

Part

CM-3130

CM-3140

CM-3150

 

 

 

 

Orange

-

1

1

Wire

 

 

 

 

 

 

 

Blue

1

-

1

Wire

 

 

 

 

 

 

 

Grey

1

1

2

Wire

 

 

 

 

 

 

 

In-line

1

1

1

Resistor

 

 

 

 

 

 

 

 

2

2

2

 

 

 

 

CM-3000 Series Illuminated Switches

Single Gang and Jamb Width

Installation Instructions

Description

CAMDEN DOOR CONTROLS CM- 3000 Series Exit Switches are heavy duty push-buttons designed for industrial and commercial applications, where illumination is required. Buttons are 1 5/8” (40mm) in diameter, and are available in red or green (other colors on request). The faceplate is 1/4” thick brushed aluminum, in 1 3/4” or 2 3/4” widths. Optional duranodic (US40) finish is also available.

CM-3000 Series switches utilize UL listed switch components. Finished models comply with UL61058 Standard for Switches. Rated 10 amps @ 30

VDC, either momentary or maintained operation.

Application

Camden illuminated Exit Switches are ideal for high traffic areas such as building front entrances and exits, as well as institutions, such as hospitals where an

illuminated button is required. They can be surface, flush, or mullion (narrow stile) mounted.

Camden Illuminated Exit switches are designed to control electric locks, electro-magnetic locks, electric strikes, automatic doors, and handicap operators. They may also be used for automatic

doors, shunting, bypassing alarms, request-to-exit, timed functions, and many other applications.

Installation

CM-3000, CM-3010, CM-3020, CM-3030, CM-3040 and CM-3050 are supplied with a brushed aluminum faceplate that can be easily mounted to a single gang electrical box.

CM-3100, CM-3110, CM-3120, CM-3130, CM-3140 and CM-3150 are supplied with 1-3/4” brushed aluminum faceplate for door jamb mounting.

Figure 1 shows the cutout required for door jamb mounting.

Figure 1 - Door Jamb Cutout

 

Loading...
+ 1 hidden pages