26”/32”/42”
A626N/A632N/A642N INSTRUCTION MANUAL
TABLE OF CONTENT |
|
FOR YOUR SAFETY.......................................................................................... |
2 |
PRECAUTIONS AND REMINDERS.............................................................. |
3 |
IMPORTANT SAFETY INSTRUCTIONS...................................................... |
4 |
PACKAGE CONTENTS................................................................................... |
5 |
PREPARATION................................................................................................... |
6 |
ATTACHING THE BASE............................................................................................................ |
6 |
PREPARING YOUR LCD HDTV FOR WALL MOUNTING............................................. |
6 |
PERIPHERAL CONNECTION GUIDE......................................................... |
8 |
OPERATING INSTRUCTIONS...................................................................... |
9 |
TO USE THE FRONT PANEL CONTROL............................................................................ |
9 |
TO USE THE REMOTE CONTROL..................................................................................... |
10 |
VIEWING MODE ILLUSTRATIONS................................................................................... |
12 |
CONNECTING EQUIPMENT.............................................................................................. |
13 |
TO USE THE MENUS.............................................................................................................. |
19 |
PICTURE MENU....................................................................................................................... |
19 |
SOUND MENU........................................................................................................................ |
20 |
TV MENU................................................................................................................................... |
20 |
FEATURES MENU.................................................................................................................... |
21 |
PARENTAL MENU................................................................................................................... |
22 |
COMMON INTERFACE MODULE..................................................................................... |
23 |
OAD OPERATION.................................................................................................................. |
24 |
TIPS.............................................................................................................................................. |
25 |
PRODUCT SPECIFICATION........................................................................ |
26 |
BEFORE CALLING SERVICE......................................................................... |
28 |
GLOSSARY........................................................................................................ |
29 |
APPENDIX......................................................................................................... |
30 |
INFORMATION............................................................................................... |
32 |
PRODUCT GUARANTEE............................................................................. |
33 |
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105 |
1 |
SYMBOL |
SYMBOL DEFINITION |
|
|
DANGEROUSVOLTAGE: The lightning flash with arrowhead |
|
|
symbol, within an equilateral triangle, is intended to alert the user to |
|
|
the presence of uninsulated “dangerous voltage” within the product’s |
|
SA 1965 |
enclosure that may be of sufficient magnitude to constitute a risk of |
|
|
electrical shock to persons. |
|
|
INSTRUCTIONS: The exclamation point within on |
|
|
equilateral triangle to alert the user to the presence of |
|
SA 1966 |
important operating and maintenance (servicing) |
|
instruction in the literature accompanying the appliance. |
||
|
Batteries installed warning
Caution - Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
FORYOUR SAFETY
Before operating the TV please read this manual thoroughly.This manual should be retained for future reference.
NOTICE
1.The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
2.Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
3.The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference.
WARNING:
To prevent fire or shock hazard, do not expose the TV to rain or moisture. Dangerously high voltages are present inside the TV. Do not open the cabinet. Refer servicing to qualified personnel only.
2 |
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105 |
PRECAUTIONS AND REMINDERS
Place unit on even surfaces.
Unplug immediately if is malfunction like no picture, no video/audio, smoke and bad odor from TV.
Don't throw any object inside the TV box like metals or other flammable materials.
Don't place the TV in confined spaces or in a box when using it.
Unplug immediately if other foreign materials are put inside TV box or if the TV fell down.
Prohibit/Avoid opening TV cabinet.
Remember to unplug the AC cord from the AC outlet before cleaning. Do not use liquid cleaners or aerosol cleaners to clean the display.
Make sure to unplug the unit when not in use for a long period of time (days).
Do not cover or block any vents and openings. Inadequate ventilation may shorten the life of the display unit and cause overheating.
Avoid direct sunlight, dusty, high humidity and smoky areas.
Call service personnel to clean the internal part of the TV once a year.
Do not place the display near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool or in a damp basement.
Notice for Remote Controller
Avoid Dropping Avoid Liquids Avoid Aerosol Cleaners
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105 |
3 |
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1.Read these instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Do not use this apparatus near water.
6.Clean only with a dry cloth.
7.Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.
8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9.Do not defeat the safety purpose of the polarized or grounding type plug.A polarized plug has two blades with one wider than the other.A grounding type plug has two blades and third grounding prong.The wide blade or third prong is provided for your safety.When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13.The TV should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
14.Unplug this apparatus during lightning storms or when unused for long periods of time.
15.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
16.The Class I apparatus shall be connected to a mains socket outlet with a protective earthing connection.
17.The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
18.CAUTION – These servicing instructions are for use by qualified service personnel only.To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
19.For use only with Listed Wall Mount Bracket with minimum weight/load: Please see page.26
20.Tilt/Stability – All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinets design.
●Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet, which could ultimately overturn the product
●Also, do not endanger yourself, or children, by placing electronic equipment/toys on the top
of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product damage and/or personal injury.
4 |
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105 |
21.Wall or Ceiling Mounting – The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.
22.Power Lines – An outdoor antenna should be located away from power lines.
23.Outdoor Antenna Grounding – If an outside antenna is connected to the receiver, be sure the antenna system is grounded to provide some protection against voltage surges and built up static charges. Section 810 of the National Electric Code,ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mats and supporting structure grounding of the lead-in wire to an antenna-discharge unit, size of grounding connectors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. See Figure below.
ANTENNA
GROUND CLAMP
ANTENNA DISCHARGE UNIT
ELECTRIC SERVICE EQUIPMENT
GROUND CLAMPS 
GROUNDING CONDUCTORS
POWER SERVICE GROUNDING ELECTRODE SYSTEM
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE Note to the CATV system installer:This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the 6 English grounding system of the building, as close to the point of cable entry as practical. Please, make sure to connect the power plug to the wall outlet socket after connecting the TV to the adapter!
24.Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
25.Excessive sound pressure from earphones and headphones can cause hearing loss.Adjustment of the equalizer to maximum increases the earphones and headphones output voltage and therefore the sound pressure level.
PACKAGE CONTENTS
●● TV unit
●● Remote Control
●● Two (AAA) Batteries for the Remote Control ●● Power Cord
●● User Manual
●● Quick Start Guide
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105 |
5 |
PREPARATION
IMPORTANT: Do not apply pressure to the screen display area which may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations.
PREPARINGYOUR LCD HDTV FOR WALL MOUNTING
We suggest that you keep your TV at least 2.36 inches (60 mm) from the wall to prevent cable interference.
Before mounting your TV on the wall, you need to remove the base.
For your safety, please use listed wall mount bracket with minimum weight of the TV without stand. (Please see page.26.)
To attach a wall mount bracket to your TV:
1Loosen the screws holding your TV to the stand and remove the stand base from the TV.
2Secure the wall mount bracket to the back of your TV using four screws, as indicated in the illustration.
For 26" model
|
200 mm |
|
M4 screws |
|
|
||
|
|
|
|
|
|
|
|
For 32" model
200 mm
For 42" model
NOTE
Wall mount bracket & screws are not included.
Please make sure to connect the power plug to the wall outlet socket after connecting the TV to the power cord!
1.Install the base stand; place the TV on a solid surface.
Min 1 m
Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover.
To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water.The equipment shall not be exposed to dripping or splashing.
6 |
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105 |
2.Connect the antenna cable or CATV cable to the aerial socket TV ANTENNA at the back of the TV set.
3.Remote control:
Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AAA 1.5V).
4.Power:
Insert the power cord in the wall socket with AC power supply.You can see LED states at the front panel. If the LED colour is Blue, means the TV set is power on. If the LED colour is Red, which means this TV set is in standby state.
5. Turn theTV on:
Press the POWER key on the Remote control or the side panel control knobs. The TV will be turned on in a minute with display on the screen.
Power Key
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105 |
7 |
PERIPHERAL CONNECTION GUIDE
|
26/32 |
42 |
|
|
26/32 
AC POWER
42
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
||
|
||
|
||
|
|
|
COMMON INTERFACE (CI) – Conditional Access Module (CAM) use only. Please contact your service provider for details.
AV IN – Connect the primary source for composite video devices, such as a VCR or video game. Use the white and red connectors to connect the external audio from the same source.
USB – Technician service use only.
Earphone Output – Connect to the headphones.When the headphone is inserted to the plug, all the speakers will be muted.
TV ANTENNA – Connect to an antenna or digital cable (out-of-the-wall, not from Cable Box) for Digital TV.*
SCART – Connect the video recorder or decoder to the television. Full SCART transmits RGB, CVBS video in/out, and audio in/ out; HALF SCART transmits S-Video, CVBS video in/out, and audio in/ out.
Note : SCART1/2 has monitor out. (CVBS/YPbPr/ATV/DTV)
PC IN – Connect the video and audio cables from a computer here.
COMPONENT (Y/Pb/Pr with Audio L/R) – Connect the primary source for component video devices such as a DVD Player or set top box here.
SPDIF (Digital Audio Out) – When a digital audio signal is associated with the input selected for viewing, the digital audio will be available on this SPDIF connection to your home theatre system.
HDMI – Connect the primary source for digital video such as a DVD multimedia player or set top box through this all digital connector.
Once your equipment is connected, use the following procedure to view the input signal: Press the SOURCE button on the remote controller to select the relevant source to view. (ex: Press
YPbPr button to select “YPbPr” if you have connected a video recorder to Component socket.)
8 |
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105 |
OPERATING INSTRUCTIONS
TO USETHE FRONT PANEL CONTROL
1 2 3 4 5 6 7
1 VOL + |
VOL +: Press to increase the sound volume level. |
2. VOL - VOL - : Press to decrease the sound volume level.
3.CH ▲ CH ▲: Press to select the next higher Programme number.
4.CH ▼ CH ▼: Press to select the next lower Programme number.
5.MENU Menu key: Press to open or exit the OSD (on-screen display) menu.
6.INPUT Input key: Press to select the input source.
Power key: Press to turn on / off (standby) the TV set. (Press to turn on
7. i POWER TV after the power on status, LED had changed to the Blue colour and stopped flashing.)
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105 |
9 |
TO USETHE REMOTE CONTROL
POWER
Press to turn ON/OFF (standby) the TV.
SOURCE
Press repeatedly to choose the various input sources.
Number buttons
Press to enter TV channel number to select channel.
EPG
Press to display the Electronic Programme Guide.
PRE CH
Press to display the previous channel.
EPG
YPbPr
Vol
DUAL
HDMI |
|
|
Press to choose HDMI source |
|
|
mode. |
|
|
YPbPr |
|
|
Press to choose YPbPr source |
MENU |
|
mode. |
|
|
/EXIT |
INFO |
VIDEO
Press to choose AV source mode.
PC
Press to choose PC source
mode. FAV CH-LIST AD FREEZE
VOL+ /VOL-
Press + or - to adjust the volume.
CH |
/ CH |
Press |
or to browse |
through the TV channels.
MUTE
Switch the sound ON/OFF.
ZOOM
Select the display aspect from Auto, Normal (4:3),Wide (16:9), subtitle, full screen, or 14:9 mode.
DUAL
Press to select from mono, stereo, Dual I, or Dual II.
AUDIO ADJ
Press to choose from Personal, Speech, Music.
VIDEO ADJ
Press to choose the Smart Picture mode from Personal, Standard, Movie, Vivid, Eco.
SLEEP
Press to set the preset time to switch the TV to standby mode automatically.
MENU/EXIT
Press to open or close menu.
▲, ▼, ◄, ►, OK
Press to adjust or confirm the various function items on the menu.
INFO
Press to display or close the information screen.
Colour buttons
•In TV mode: Follow the directions in the OSD screen.
•In Text mode:Text control buttons.
10 |
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105 |
Loading...