Bury and Co KG CC9055 Users Manual

CC 9055

Index

Introductory information 2

1. General 2

2. Security guidelines 2

Installation of the hands-free car kit 4

3. Scope of supply 4

4. Positioning and mounting 6

5. Connecting the Electronic box 9

6. Installation of the audio switchbox AC 5120 11

7. Installation instructions for the fuses 15

Operating guidelines 16

8. Switch-on 16

9. Establishing a

10. Disconnect a

11. Menu navigation 18

Bluetooth

Bluetooth

Further Information 25

12. Service 25

®

connection 16

®

connection 18

2

Introductory information

1. General

Dear customer,

Congratulation on purchasing a BURY hands-free car kit. You have cho­sen a high quality product that is extremely easy to use. All aspects of
BURY production through to sales and service are subject to strict qua­lity management according to DIN EN ISO 9001. All BURY hands-free
car kits meet CE and e1 security standards. Furthermore, we provide a
two-year warranty on all components.
Please read the operating manual carefully so that you can fully enjoy
your BURY hands-free car kit. If you have any further questions concer­ning installation or operation of your car kit, please contact your dealer.
He will be happy to give you reliable advice. You can also contact our
hotline. Our phone and fax numbers are listed in the chapter Service at
the end of the operating instructions.

Have a good trip!

2. Security guidelines

Installation – who and where

The installation of this system can be carried out by yourself but please
observe the installation requirements of the automotive manufacturer
(VAS 1978). During the installation, park the car at a place where the
road traffic is not impaired. We recommend to let a specialised work­shop perform the installation.

Power supply

This system has been designed for the use in vehicles with an on-board
supply system of 12 volts (passenger car). If you intend to install the
device in a vehicle with an on-board supply system of 24 volts (lorry),
please use a voltage converter. If you have queries regarding this sub­ject, please contact our hotline.

3

Position, volume

Install the components of the device in the vehicle so that your field of
vision is not impaired and the components are not mounted in the im­pact zone of the passenger compartment or in the airbag inflation
zones. The removal of coverings (with and without airbags) or compo­nents of the dashboard requires – in some cases – special tools and
special knowledge.

Intended use

We shall not be liable for damages or malfunctions due to improper use
of the navigation system. Therefore, do not expose the device to moi­sture, extreme temperatures or shocks and carefully follow the proce­dure described in the installation and operating guidelines.

Use while driving

Operate the system only when the situation allows it and when you do
not endanger, harm, constrain, or annoy other road users. The volume
of the device has to be set in a way that exterior noise is still audible.

Faults

Do not commission the device if you detect or assume a defect. In this
case, contact a Bury specialised dealer or our hotline. Improper repair
efforts can be dangerous for you. Therefore, only skilled personnel may
perform inspections.

Important:

The driver is ultimately responsible for the safe operation X

and control of their vehicle at all times. You should never
use a hand held phone, including sending or reading tex t or
picture messages, while driving.

Research indicates that there is a risk to safety when the X

driver of a motor vehicle is distracted and using a mobile
phone while driving can be a distriction.

The manufacture r strongly recommends that you use a X

hands-free solution when driving.

4

3. Scope of supply

Installation of the hands-free car kit

5

Description of the components:

1) Electronics box
(with or without an internal switch box, depending on version)

2) Monitor on installation pad

3) Microphone

4) Installation and Operating manual on CD

5) Fixing screws for electronics box, rider,
adhesive pad, cleaning cloth

Variant 1:

6) External loudspeaker switch-box AC 5120

Variant 2:

6) Power supply cable with fuses

7) Cable for internal loudspeaker switch box

Please note:

If certain components are added or omitted you will recei- X

ve the corresponding information on a separate enclosure.

6

Installation of the hands-free car kit

4. Positioning and mounting

Step 1:

First of all, please choose the most convenient position for the monitor
and the installation pad in your vehicle by attaching the monitor / hook­and-loop fastener to the pad and checking different positions in the
vehicle.

After having found a suitable position for the monitor in the vehicle you
can mount / attach the installation pad / hook-and-loop fastener accor­dingly. Please use a cleaning cloth for degreasing the surfaces you want
to attach the installation pad to.

The end of the cable with the small Molex plug is ideally suited for pla­cing through small openings in the dashboard area. This facilitates a
practically invisible installation of the cable. Take the length of the cable
into account and make sure that it is of sufficient length to reach the
intended location of the electronics box.

Important:

When positioning the monitor please take care that the X

monitor does not impair the view onto the road, that it will
not be installed in the impact zone of the passenger com­par tment (amongst others in the airbag inflation zones) and
that cables may be laid without any problems.

The installation pad / hook-and-loop fastener can be af- X

fixed just once, removing could damage the adhe sive area.
In case of high variations in temperature s - depending on
the structure and the features - decolourisations of the sur­faces can occur during the subsequent utilization.

Please avoid direct sunlight on the monitor or high inter- X

nal temperatures, which can be rapidly reached in parked
vehicles. In such cases, remove the monitor of the hands­free car kit fro m t he cradle and pu t i t i n t he car glove pocket
or glove box for instance.

Example of installation 1:

7

1 2 3

5 6

Example of installation 2:

1 2 3

4

4 5 6

8

Installation of the hands-free car kit

Step 2:

Depending on the vehicle type and its equipment (e.g. airbags), it is
reasonable to install the microphone either at the A-pillar, at the sun
shield or at the roof interior. For details about the equipment features
please refer to the vehicle documents.

Step 3:

Please lay the cables in a way that they do not lie/hang unsecured in
the vehicle and that they may not influence the conducting of the vehi­cle. When laying a cable, please take care that it is not under traction
stress but that it has some tolerance. Avoid crushing the cable as da­mages of the insulation can be caused by friction/rubbing.

Step 4:

Install the electronics box at a convenient place in the vehicle. This can
e.g. be behind the radio, in the glove box, or in the centre console.
Please mind that you can access the connections of the box without
difficulty. Before connecting the components to the electronics box you
should branch off the battery for safety reasons. In doing so, take into
account that there might be a radio coding (confer radio manual).

Important:

Please install the electronics box behind a cover or so- X

mewhere you can only reach by opening or unfastening a
protective cover / a cover. The terminal box must not hang
loosely in the vehicle.