Bury and Co KG BURYBCM001 Users Manual

BURY GMBH & CO. KG ROBERT-KOCH-STRASSE 1-7 32584 LÖHNE
BURY GMBH & CO. KG • ROBERT-KOCH-STR. 1-7 • 32584 LÖHNE
THB
“Bluetooth Comfort Module”
BCM001
Operation Manual
Date of preparation: April 2003
OEM User
BURY GMBH & CO. KG ROBERT-KOCH-STRASSE 1-7 32584 LÖHNE
BURY GMBH & CO. KG • ROBERT-KOCH-STR. 1-7 • 32584 LÖHNE
General Notes:
This document is issued by Bury GmbH & Co.KG (hereinafter called Bury) in confidence, and is not to be reproduced in whole or in part without the prior written permission of Bury. The information contained herein is the property of Bury and is to be used only for the purpose for which it is submitted and is not to be released in whole or in part without the prior written permission of Bury.
Important
1. This module is intended to use for wireles audio and data transfer for OEM integration in
final products.
2. When integrating the THB “Bluetooth Comfort Module” into a final product, the following
information must be considered: All products containing the module must be labelled. The label must be affixed on an exterior surface of the end product such that it will be visible upon inspection in compliance with the modular approval guidelines developed by the FCC. The label must state “This device contains FCC ID QZ9-BURYBCM001” In addition, the user manual for the end product must contain the following information: "This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation."
3. Take care of electrostatic discharge while handling the module. This may destroy the
module.
4. Don´t place the module in a metal housing. This may reduce the operating distance.
5. This device and its antenna must not be co-located or operating in conjunction with any
other antenna or transmitter.
6. For using antennas not mounted on the module see related document “Bluetooth Comfort
Module Antenna Specification “. Take only the specified antennas, otherwise loss of FCC and Bluetooth Approval will result.
7. The users manual or instruction manual for an intentional or unintentional radiator shall
caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
8. The OEM Manufacturer must not describe to the end user how to install or deinstall the
Bluetooth Comfort Module.
BURY GMBH & CO. KG ROBERT-KOCH-STRASSE 1-7 32584 LÖHNE
BURY GMBH & CO. KG • ROBERT-KOCH-STR. 1-7 • 32584 LÖHNE
Bluetooth module – Top side
Picture 1.
electret microphone + --- speaker --- +
Loading...
+ 6 hidden pages