Bunn LPG E9004.0003B User Manual

176.2 Kb

Low Profile Portion Control Grinder with 1 Hopper

ITEM#

PROJECT

DATE

Features

Portion Control Grinder

Just 8.64” (21.95 cm) wide and a low profile height of 15.1” (38.4 cm).

Professional grind provided by large 3.19” (8.1 cm) diameter burrs.

Powered by quiet, high torque motor.

Large, clear bean hopper merchandises 6 lbs. (2.72 kg) of fresh coffee beans.

Easy access on back for grind weight adjustment.

Three-year warranty on grinding burrs.

International electrical configurations available.

Model LPG

(funnel not included)

Dimensions: 15.1” H x 8.64” W x 10” D

(38.4cm H x 21.95cm W x 25.4cm D)

For current specification sheets and other information, go to www.bunn.com.

Related Products

Precision Burrs

All BUNN grinders use precision burrs to cut (not crush) the coffee beans and deliver consistent grind distribution. BUNN burrs are rated at a Rockwell hardness of 66C, resulting in an exceptionally long burr life.

Model

Agency Listing

 

LPG

 

 

E9004.0003B

Patents Apply

3/06 C1.4

Dimensions & Specifications

Model

Product #

Volts

Amps

Total Watts

Capacity

Cu. Ft.

Shipping Weight

Cord Attached

LPG

20580.0001

120

3

360

6 lbs.

2.2 ft3

23 lbs.

Yes*

*Power cord (NEMA 5-15P) 15 Amp-120V machine only.

 

 

 

 

 

Electrical: Model requires 2-wires plus ground service rated 120V, single phase, 60 Hz.

Bunn-O-Matic Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • www.bunn.com

BUNN® practices continuous product research and improvement.We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.

All dimensions shown in inches. Bunn-O-Matic Corporation owns all copyrights relating to materials in this publication. Please contact BUNN to request permission to reproduce any portion of this publication.