Verve 100 – Edition 5 – 18.8.00 – 3250
Using the memory
You can store up to 10 numbers in the memory, each up to 22 digits long, which can then be speed dialled. Stored numbers can include settings made with the and # buttons. You can also enter a Pause by holding down the R (Recall) button.
To store a number in the memory
Press the SET button.
Press the MEMORY button.
0-9 Enter a number between 0-9 under which you want to store the number.
KEYPAD Enter the telephone number to be stored.
Press the SET button to confirm.
You will hear a confirmation beep.
To speed dial a stored number
Press the MEMORY button.
0-9 Enter the memory location number which the number is stored.
Press the HANDSET button. The automatically.
Additional features
To adjust the ringer volume
There are 3 volumes to choose from, with 1 being the lowest.
Press the SET button, then the 5 button.
5 You will hear the current ringer volume.
IKL
KEYPAD Use the keypad to enter the setting you want 1-3.
Press the SET button to confirm.
7
Verve 100 – Edition 5 – 18.8.00 – 3250
To adjust the ringer melody
There are 2 ringer melodies to choose from.
Press the SET button, then the 6 button.
You will hear the current ringer melody.
KEYPAD Select melody 1 or 2 using the keypad.
Press the SET button to confirm.
To adjust the earpiece volume
The volume of received calls can be set to 3 different levels. 1 is the lowest.
Press the SET button, then the 0 button.
KEYPAD Select a level 1-3 using the keypad.
Press the SET button to confirm.
To switch the keypad lock on and off
You can lock the keypad so that it cannot be used accidentally while carrying it around.
You are still able to receive calls.
#Press and hold down the # button until the display shows:
The keypad is now locked and you cannot dial out. Incoming calls can be answered as normal by pressing the HANDSET button.
#To unlock the keypad press and hold the # button until the display returns to standby.
8
Verve 100 – Edition 5 – 18.8.00 – 3250
Help
Problem |
Possible causes |
Solution |
|
|
|
Registration did |
The battery is not |
Charge the battery |
not work. |
sufficiently |
for 16 hours (see |
|
charged. Handset |
pages 4 and 5). |
|
and base station |
Remove and then |
|
were not prepared |
re-insert the power |
|
for registration. |
supply unit. |
|
|
|
No display. |
The battery is not |
Charge the battery |
|
charged. |
or replace it (see |
|
|
page 4). |
|
|
|
No reaction when |
The keypad is |
Press # for 1 |
pressing keypad |
locked. |
second. |
buttons. |
|
|
|
|
|
No radio |
The handset is |
Move closer to the |
connection to the |
outside the base |
base station. |
base station |
station range. |
|
icon flashing. |
The handset is not |
Register the handset |
|
||
|
registered. |
(see page 5). |
|
The base station is |
Check the power |
|
not active. |
supply unit at the |
|
|
base station. |
|
|
|
General information
Guarantee
9
Verve 100 – Edition 5 – 18.8.00 – 3250
If you have to return your product
Pack the base station and handset securely, preferably in the original packing. All parts must be returned, including line cords, power supply unit and original batteries. We cannot take responsibility for goods damaged in transit.
Technical information
How many handsets can you have?
All items of telephone equipment have a Ringer Equivalence Number (REN) which is used to calculate the number of items that may be connected to any one telephone line. The Verve 100 has a total REN of 1. Any other instrument provided by BT may be assumed to have a REN of 1 unless stated otherwise. A total REN of 4 is allowed per telephone line. (For example: if the Verve 100 is used in conjunction with three extension telephones, each with a REN of 1, then the total REN = 4.)
R&TTE
This product complies with the R&TTE Directive 99/05/EC.
compatibility
100 can be connected to compatible switchboards. please contact your switchboard supplier.
100 is pre-set to TONE dialling. You will hear a each time you dial a number. Tone dialling is suitable
digital exchanges. If you cannot make a call with you may need to switch to PULSE dialling.
To set the dialling mode
Press the HANDSET button.
Press the SET button.
1
Press the 1 button, then the 0 button.
0
4 GHI Press the 4 button to set PULSE dialling.
Press the SET button to confirm.
Press the HANDSET button to return to standby.
If you wish to return to TONE dialling, press 2 instead of 4.
10
Verve 100 – Edition 5 – 18.8.00 – 3250
0682
CE compliant to
89/336/EEC (EMC Directive) & 73/23/EEC (Low Voltage Directive)
Offices worldwide
described in this publication be modified from time to time.
subject to British Telecommunications of contract. Nothing in this publication
mark of the UK.
2000.
Street, London EC1A 7AJ.
.
Partnership Limited. Issue 1 (8/00) 4
international environmental standards.
-1-7619
Verve 100 – Edition 5 – 18.8.00 – 3250
Verve 100
Digital Cordless Telephone
User guide
This equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for
access to emergency services.
This product is intended for connection to analogue public switched telephone networks and private switchboards in the United Kingdom.