BT Paragon 200 User Manual

0 (0)

Paragon 200 - Edition 4.3 – 26th Sept ’00

Paragon 200

Digital Telephone Answering Machine

This product is intended to be connected to analogue networks in the United Kingdom

Paragon 200 - Edition 4.3 – 26th Sept ’00

Please open this page for an ‘at a glance’ guide to your Paragon 200.

Paragon 200 - Edition 4.3 – 26th Sept ’00

Please open this page for a further

‘at a glance’ guide to your Paragon 200.

BT Paragon 200 User Manual

Paragon 200 - Edition 4.3 – 26th Sept ’00

At a glance

Directory label

Lets you select want from the

OK

Confirms the setting you want.

Answer On

Switches the answering

on and off. Also lets you set answer

M1-M3 One-touch but

Store/dial any one of your 3 used numbers at the touch

single

Redial/P

Redial the last number Also lets you enter a pause

storing numbers in the memory

Inductive coupler

In the handset.

Lets you skip forwards or backwards through your messages during playback.

Used to select setup options.

Display

Sel

OK

M1

GHI

4

S

M3

Allows you to

05

 

 

 

 

c

 

 

 

Re all

 

 

 

 

R

 

J

M

 

 

 

 

K

N

 

 

 

 

L

O

 

 

 

 

5

6

 

 

 

 

 

Z

 

 

 

 

 

 

 

ck

 

 

 

i

di

 

u

 

 

a

 

Q

 

 

 

l

Q

display contrast.

the volume of the when playing back

and memos.

mo

messages. Also used to messages.

and Ring indicator

Recall

For use when connected to a switchboard, or for BT Select Services.

ic M

Microphone

For recording memos and your outgoing message.

to talk to someone close the person on the other line hearing your

.

Quickdial

store and dial up to 10 numbers by pressing just two buttons.

1

Paragon 200 - Edition 4.3 – 26th Sept ’00

Mode switch

Default TB

P

T

TB

MODE

HANDSET

Back up battery

 

Takes one

 

9V DC

LINE

CAUTION

 

DISCONNECT

 

FROM PHONE

 

LINE BEFORE

 

REPLACING

 

BATTERY

 

Handset socket

rd socket

9V power socket

2

Paragon 200 - Edition 4.3 – 26th Sept ’00

In this guide

At a glance

1

Introduction

4

Unpacking your Paragon 200

4

For your records

4

Setting up

5

Plan the location of your Paragon 200

5

Using the telephone

9

Using the Inductive Coupler

9

Making and ending calls

9

Using the one-touch buttons

10

Using the quickdial memory

11

Using the answering machine

12

Selecting the answering machine mode

12

To use the pre-recorded outgoing message

12

Message and Ring indicator

14

To use Caller Return (Auto 1471)

15

Using Remote Access

15

Optional settings

17

General information

19

Safety

19

Guarantee

19

Help and advice

20

Technical information

20

Wall-mounting template

22

Index

23

 

 

3

INTRODUCTION

Paragon 200 - Edition 4.3 – 26th Sept ’00

Introduction

Your Paragon 200 has been designed for ease of use and made to the high standards set by BT.

Unpacking your Paragon 200

If anything is missing, please contact your place of purchase immediately.

For your records

Date of purchase:

Place of purchase:

Serial number (on the underside of the telephone base):

Purchase price:

For warranty purposes, proof of purchase is required, so please keep your receipt.

telephone answering machine.

Handset and cord.

Plug mounted, 13 amp mains adaptor.

Line cord.

I2:05

1 2 3

4 5 6

7 8 9

0

Wall mounting plugs and screws.

Enter your PIN here

Plinth for desk mounting

 

 

 

 

 

 

 

Operating your Paragon 200

 

 

 

 

 

 

 

from another telephone

 

 

 

 

 

 

 

To switch the answering machine ON:

 

 

 

 

 

 

 

Dial your phone number.

 

 

 

 

 

 

 

 

Let the phone ring for 20 rings.

 

 

 

 

 

 

 

 

Your outgoing message begins to play.

 

 

 

 

 

 

 

 

Your Paragon 200 is now on and you

 

 

 

 

 

 

 

 

may hang up.

 

 

 

 

 

 

 

 

To access the answering machine menu:

 

 

 

 

 

 

 

Press and release the

button during

 

 

 

 

 

 

 

 

the outgoing message.

 

 

 

 

 

 

 

 

Enter your security code.

 

See page 15/16 for more information about your PIN.

Remote access menu

Press to:

2

Play messages.

4

Skip back to previous

 

message.

5

Delete the message being

 

played (or delete all messages

 

at the end of play back).

6

Skip forward to the next

 

message.

 

Skip outgoing message

 

(OGM).

4

Paragon 200 - Edition 4.3 – 26th Sept ’00

Setting up

Follow these steps to set up your Paragon 200 ready for use.

Plan the location of your

Paragon 200

Situate your Paragon 200 close enough to both the phone and mains power sockets so that the cables will reach.

Your Paragon 200 should be kept free of dust, moisture, high temperature, vibration and should not be exposed to direct sunlight. Do not stand it on carpets or other surfaces which generate fibres or place it in locations which prevent the free flow of air over its surfaces.

Warning

The apparatus is designed to be operated in a normal office or domestic environment where the relative humidity does not exceed 75%.

It should not be used in bathrooms or near water.

1Insert back-up battery

Although optional we recommend fitting an alkaline battery which will provide up to 25 hours back-up and ensure your messages are saved

in the event of a mains power failure.

Ensure the Paragon 200 is disconnected from the telephone line.

To fit the battery.

1 Lift the cover.

2 Insert one LR61 9V battery (not supplied).

1

2

Battery low warning

The display indicates when the battery power is low. If no battery is inserted, it remains on the display.

UP SETTING

5

SETTING UP

Paragon 200 - Edition 4.3 – 26th Sept ’00

2Connect handset cord to base

HANDSET

9V DC

LINE

3Connect the telephone line cord

LINE

4Check Dial Mode setting (default TB)

Use the dialling mode switch on the underside of your Paragon 200.

Your Paragon 200 should be pre-set to TB which gives you Tone dialling. This ensures the phone will work with all modern digital exchanges.

P

T

TB

MODE

HANDSET

If you do not get a dialling tone, try setting the dialling mode to P.

If you are connecting to a switchboard, check with your switchboard operator or communications manager which dialling mode you need. Your Paragon 200 is approved for all compatible switchboards.

5Plug the mains adaptor cord into the back of the telephone

If you do not have a modern phone socket, call Freephone 0800 800 150 and ask for a BT engineer to come and fit the correct socket. This is a chargeable service.

9V DC

LINE

CAUTION

6

Loading...
+ 19 hidden pages