Home Standby - 7kW - 12kW - 15kW
|
|
Air-Cooled Gas Engine Generator Sets |
|
|
|
Continuous Standby Power Rating |
Model ASPAS1BBA007 - 7kW 60Hz |
|
|
|
Model ASPAS1BBA012 - 12kW 60Hz |
INCLUDES: |
Model ASPAS1BBA015 - 15kW 60Hz |
•Automatic Transfer Switch
with Built-In Emergency Load Center
•Pre-wired External Connection Box
•Flexible Fuel Line
•Composite Mounting Pad
•Pre-wired conduits
•Natural Gas or LP Gas Operation
•GFCI duplex outlet & 12Vdc outlet
•UL Listed to Canadian safety standards
•2 Year Limited Parts and Labor Warranty
FEATURES
INNOVATIVE DESIGN & PROTOTYPE TESTING are key components |
SOLID-STATE, FREQUENCY COMPENSATED VOLTAGE |
of BRYANT’s success in “IMPROVING POWER BY DESIGN.” But it |
REGULATION. This state-of-the-art power maximizing regulation |
doesn’t stop there. Total commitment to component testing, reliability |
system is standard on all BRYANT models. It provides optimized |
testing, environmental testing, destruction and life testing, plus testing |
FAST RESPONSE to changing load conditions and MAXIMUM |
to applicable CSA, NEMA, EGSA, and other standards, allows you to |
MOTOR STARTING CAPABILITY by electronically torque-matching the |
choose BRYANT with the confidence that these systems will provide |
surge loads to the engine. |
superior performance. |
|
TEST CRITERIA:
>PROTOTYPE TESTED
>SYSTEM TORSIONAL TESTED
>NEMA MG1-22 EVALUATION
>MOTOR STARTING ABILITY
SINGLE SOURCE SERVICE RESPONSE from BRYANT’s dealer network provides parts and service know-how for the entire unit, from the engine to the smallest electronic component. You are never on your own when you own a BRYANT system.
BRYANT TRANSFER SWITCHES. Long life and reliability are synonymous with BRYANT systems. One reason for this confidence is that the BRYANT product line includes its own transfer systems and controls for total system compatibility.
HOME STANDBY SPECIFICATIONS |
Home Standby - 7kW - 12kW - 15kW |
|||
|
|
|
|
|
|
|
|
|
|
|
• Durable (OHVI) Design |
Maximizes engine “breathing” for increased |
fuel efficiency. Cylinder walls run cooler, reducing |
|
|
|
oil consumption. Because heat is the primary cause of engine wear, the OHVI has a significantly |
||
|
|
longer life than competitive engines. |
|
|
ENGINE |
• ”Spiny-lok” cast iron cylinder walls |
Rigid construction and added durability provide long engine life. |
||
• Electronic ignition, spark advance and |
These features combine to assure smooth, quick starting every time. |
|||
|
||||
|
compression release |
|
|
|
|
• Full pressure lubrication system |
Superior lubrication to all vital bearings means better performance, less maintenance and significantly |
||
|
|
longer engine life. |
|
|
|
• Low oil pressure shutdown system |
Superior shutdown protection prevents catastrophic engine damage due to low oil. |
||
|
• High temperature shutdown |
Prevents damage due to overheating. |
|
|
GENERATOR |
• Revolving field |
Allows for smaller, light weight unit that operates 25% more efficiently than a revolving armature generator. |
||
• Skewed stator |
Produces a smooth output waveform for compatibility with electronic equipment. |
|||
|
||||
|
• Displaced phase excitation |
Maximizes motor starting capability. Provides more surge capability than brushless generator designs. |
||
|
• Automatic voltage regulation |
Regulates the output voltage to ±2% prevents damaging voltage spikes. |
||
|
• UL 2200 Listed |
For your safety |
|
|
|
|
|
|
|
TRANSFER SWITCH |
• UL Listed |
For your safety |
|
|
|
• Fully Automatic |
Transfers your vital electrical loads to the energized source of power. |
||
|
• Remote Mounting |
Mounts near your existing distribution panel for simple, low cost installation. |
||
|
|
|
|
|
CONTROL |
• Manual/Auto/Off switch |
Selects the operating mode. |
|
|
• Utility voltage sensing |
Constantly monitors utility voltage, setpoints 60% dropout, 80% pick-up, of standard voltage. |
|||
|
||||
|
• Utility interrupt delay |
Prevents nuisance start-ups of the engine, set point approximately 15 seconds. |
||
MICROPROCESSOR |
• Engine warm-up |
Ensures engine is ready to assume the load, set point approximately 10 seconds. |
||
• Engine cool-down |
Allows engine to cool prior to shutdown, setpoint approximately 1 minute. |
|||
|
||||
|
• Seven day exerciser |
Operates engine to prevent oil seal drying and damage between power outages. |
||
|
• Timed Trickle Battery charger |
Maintains battery amperage to insure starting. |
||
|
• Main Line Circuit Breaker |
Protects generator from overload. |
|
|
|
|
|
||
|
• Weather protective enclosure |
Ensures protection against mother nature. Hinged key locking roof panel for security. |
||
UNIT |
|
Electrostatically applied epoxy paint for durability. |
||
• Enclosed critical grade muffler |
Quiet, critical grade muffler is mounted inside the unit to prevent injuries. |
|||
|
||||
|
• Small, compact, attractive |
Makes for an easy, eye appealing installation. |
||
INSTALLATION SYSTEM |
• Pre-wired External Connection Box |
Easy Installation - Virtually all hardware included, plus step-by-step photographed Installation Guide. |
||
• UL Listed wire nuts |
|
|
||
|
• 1’ Flexible Fuel Line |
|
|
|
|
• Composite Mounting Pad |
|
|
|
|
• Pre-wired conduits |
|
|
|
|
|
|
|