Brother RJ-2150, RJ-2140, RJ-2050, RJ-2030 Manual

Software Developer's Manual

P-touch Template 2.0 Command Reference

RJ-2030/2050/2140/2150

Version 1.00

The Brother logo is a registered trademark of Brother Industries, Ltd. Brother is a registered trademark of Brother Industries, Ltd.

© 2016 Brother Industries, Ltd. All rights reserved.

The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and, any use of such marks by Brother Industries, Ltd. is under license.

Zebra, ZPL and ZPL II are registered trademarks of ZIH Corporation.

BarStar Pro Encode Library (DataMatrix, MaxiCode, PDF417, RSS, CODE93, POSTNET, MSI/Plessey, AztecCode, GS1 DataBar Composite)

Copyright (c) 2007 AINIX Corporation. All rights reserved.

QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries. QR Code Generating Program Copyright © 2008 DENSO WAVE INCORPORATED

Each owner whose software title is mentioned in this document has a Software License Agreement specific to its proprietary programs.

Any trade names and product names of companies appearing on Brother products, related documents and any other materials are all trademarks or registered trademarks of those respective companies.

IMPORTANT - PLEASE READ CAREFULLY

Note

This documentation (“Documentation”) gives you information that will assist you in controlling your Printer RJ-2XXX (where “2XXX” is the model name).

You may use the Documentation only if you first agree to the following conditions. If you do not agree to the following conditions, you may not use the Documentation.

Condition of Use

You may use and reproduce the Documentation to the extent necessary for your own use of your Printer Model (“Purpose”). Unless expressly permitted in the Documentation, you may not;

(i)copy or reproduce the Documentation for any purpose other than the Purpose,

(ii)modify, translate or adapt the Documentation, and/or redistribute it to any third party,

(iii)rent or lease the Documentation to any third party, or,

(iv)remove or alter any copyright notices or proprietary rights legends included within the Documentation.

No Warranty

a.Any updates, upgrades or alteration of the Documentation or Printer Model will be performed at the sole discretion of Brother. Brother may not respond to any request or inquiry about the Documentation.

b.THIS DOCUMENTATION IS PROVIDED TO YOU "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. BROTHER DOES NOT REPRESENT OR WARRANT THAT THIS DOCUMENTATION IS FREE FROM ERRORS OR DEFECTS.

c.IN NO EVENT SHALL BROTHER BE LIABLE FOR ANY DIRECT, INDIRECT, PUNITIVE, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER, ARISING OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE DOCUMENTATION OR ANY SOFTWARE PROGRAM OR APPLICATION YOU DEVELOPED IN ACCORDANCE WITH THE DOCUMENTATION.

P-touch Template 2.0 Command Reference

Contents

Introduction ······························································································· 1 What is P-touch Template 2.0? ···································································· 2

1.Using P-touch Template 2.0 ····································································· 3

2.P-touch Template Settings Tool User’s Guide ··········································· 4

3.Examples for Using Commands ······························································· 9

3.1	Example for using P-touch Template 2.0 ......................................................................	9
3.2	Example for using ZPL II in P-touch Template 2.0.....................................................	13
3.3	Example for printing logo/external characters in P-touch Template 2.0....................	16

4. P-touch Template 2.0 Limitations ··························································· 19

4.1	Relating to text objects.................................................................................................	19
	4.1.1 Font, size, etc....................................................................................................	19
	4.1.2 Character alignment .........................................................................................	20
	4.1.3 Text Layout settings ..........................................................................................	21
4.2	Relating to barcodes ....................................................................................................	22
	4.2.1 Barcodes ...........................................................................................................	22
	4.2.2 1D barcodes......................................................................................................	23
	4.2.3 2D barcodes......................................................................................................	24
4.3	Relating to images........................................................................................................	25
4.4	Relating to Numbering .................................................................................................	25
4.5	Relating to Database....................................................................................................	25
4.6	Others ...........................................................................................................................	26
	4.6.1 Transferring templates......................................................................................	26
	4.6.2 About objects in a template ..............................................................................	26

5. Precautions ·························································································· 27

5.1	Notes for printers with Bluetooth interface..................................................................	27
5.2	Relationship between the P-touch Editor settings and the printer image .................	28
5.3	Making a template in order to save time before starting to print................................	29

6. Control Code Lists ················································································ 30

6.1	Setting and retrieving commands for P-touch Template mode..................................	30
6.2	Setting and retrieving commands for raster mode .....................................................	31

7. Control Command Details······································································ 33

^PT	Select print start trigger.........................................................................	33
^FF	Start printing...........................................................................................	34
^PS	Specify print start command text string ................................................	35
^PC	Specify print start received character count.........................................	36
^SS	Specify delimiter ....................................................................................	37
^TS	Select template......................................................................................	38
^CO	Select printer settings (cut options)......................................................	39
^LS	Specify line spacing with line feed........................................................	40
^CC	Change the prefix character .................................................................	41
^RC	Specify line feed command text string..................................................	42
^CN	Specify number of copies......................................................................	43
^NN	Specify number of Numbering copies ..................................................	44

- i -

P-touch Template 2.0 Command Reference

^ID	Initialize template data ..........................................................................	44
^QS	Select print options................................................................................	45
^QV	Specify QR Code version......................................................................	46
^FC	FNC1 replacement setting ....................................................................	47
^II	Initialize ..................................................................................................	48
^OP	Perform printer operation (feed) ...........................................................	49
^SR	Status request........................................................................................	50
^VR	Retrieve version information.................................................................	53
^CR	Line feed in object .................................................................................	54
^OS	Select object (object number)...............................................................	55
^ON	Select object (object name) ..................................................................	56
^DI	Directly insert object..............................................................................	57
ESC i a	Select command mode .........................................................................	58
ESC iXT2	Select print start trigger.........................................................................	59
ESC iXP2	Specify print start command text string ................................................	60
ESC iXr2	Specify print start received character count.........................................	61
ESC iXD2	Specify delimiter ....................................................................................	62
ESC iXa2	Specify non-printed text strings ............................................................	63
ESC iXi2	Select command mode .........................................................................	64
ESC iXn2	Select template......................................................................................	65
ESC iXf2	Change the prefix character .................................................................	66
ESC iXc2	Select printer settings (cut options)......................................................	67
ESC iXy2	Select printer settings (cut options–specifying number of labels) ......	68
ESC iXm2	Select character code set .....................................................................	69
ESC iXj2	Select international character set.........................................................	70
ESC iXR2	Specify line feed command text string..................................................	71
ESC iXC2	Specify number of copies......................................................................	72
ESC iXN2	Specify number of Numbering copies ..................................................	73
ESC iXF2	FNC1 replacement setting ....................................................................	74
ESC iXq2	Select print options................................................................................	75
ESC iXd2	Specify recovery setting ........................................................................	76
ESC iXE2	Specify barcode margin setting ............................................................	77
ESC iXh2	Specify rotated print...............................................................................	78
ESC iXT1	Retrieve print start trigger setting .........................................................	79
ESC iXP1	Retrieve print start command setting text string ..................................	80
ESC iXr1	Retrieve print start received character count.......................................	81
ESC iXD1	Retrieve delimiter...................................................................................	82
ESC iXa1	Retrieve non-printed text strings...........................................................	83
ESC iXi1	Retrieve command mode setting..........................................................	84
ESC iXn1	Retrieve number of selected template .................................................	85
ESC iXc1	Retrieve printer settings (cut options) ..................................................	86
ESC iXy1	Retrieve printer settings (cut options–specifying number of labels)...	87
ESC iXm1	Retrieve character code set setting......................................................	88
ESC iXj1	Retrieve international character set setting..........................................	89
ESC iXf1	Retrieve prefix character.......................................................................	90
ESC iXR1	Retrieve line feed command setting text string....................................	91
ESC iXC1	Retrieve number of copies setting........................................................	92
ESC iXN1	Retrieve number of Numbering copies setting.....................................	93
ESC iXF1	Retrieve FNC1 replacement setting .....................................................	94
ESC iXq1	Retrieve print options ............................................................................	95
ESC iXd1	Retrieve recovery setting ......................................................................	96
ESC iXE1	Retrieve barcode margin setting...........................................................	97
ESC iXh1	Retrieve rotated print setting.................................................................	98

8.ZPL II supported by RJ-2030/2050/2140/2150·········································· 99

9.CPCL supported by RJ-2030/2050/2140/2150 ·········································102

Appendix A: Specifications ······································································111

-ii -

P-touch Template 2.0 Command Reference

Appendix B: Character Code Tables ·························································112

Character code tables .......................................................................................................	112
International character set table .......................................................................................	116

Appendix C: Troubleshooting···································································117

If printing does not begin (main most frequent cause)	....................................................117
If a template linked to a database is not printed ..............................................................	117

Appendix D: Introducing the Brother Developer Center ·····························118

- iii -

P-touch Template 2.0 Command Reference

Introduction

This material provides the necessary information for directly controlling the templates transferred to RJ-2XXX. This information is provided assuming that the user has full understanding of the operating system being used and basic mastery of programming in a developer's environment.

Read the model names that appear in the screens in this manual as the name of your printer.

We accept no responsibility for any problems caused by programs that you develop using the information provided in this material, affecting software, data or hardware, including the RJ-2XXX, and any problems resulting directly or indirectly from them. Use this material only if you accept these terms.

This material shall not be reproduced, in part or in full, without prior approval. In addition, this material shall not be used as evidence in a lawsuit or dispute in a way that is unfavorable towards our company.

- 1 -

Introduction

P-touch Template 2.0 Command Reference

What is P-touch Template 2.0?

P-touch Template 2.0 helps the user develop a printing system that connects directly from the host and has following functions:

transfers the template data from P-touch Editor to the printer (2)

transfers the ASCII text and binary data from a host to the template in the printer (3) (“Host” includes medias such as barcode readers, smartphones or mobile terminals.)

prints the transferred data (3) (See the figure shown below.)

2. Design the template with P-touch Editor, then transfer it to printer.

1. Set up the printer from the PC according to the configuration of the host.

3. Transfer the data (text) from the host, and then print the template.

P-touch Template 2.0 commands consist of a prefix character and a two-character text string.

When the prefix character is sent, the printer begins the analysis of the P-touch Template 2.0 command, and performs the specified process if the following two-character text string corresponds to a command.

Note

*P-touch Template 2.0 is not compatible with some hosts. *These hosts should have an interface to transfer the data. *ZPL II emulation is supported by P-touch Template 2.0.

- 2 -

What is P-touch Template 2.0?

1. Using P-touch Template 2.0

(1)Specify the printer settings.

Using the P-touch Template Settings tool, specify the initial printer settings according to the host system environment or the host that the printer is connected to.

(Please refer to “2. P-touch Template Settings Tool User’s Guide” on page 4.)

The printer driver must first be installed via a USB connection.

(2)Design the template.

Using P-touch Editor, design the template to be transferred to the printer.

(Please refer to “4. P-touch Template 2.0 Limitations” on page 19.)

(3)Transfer the templates.

Using P-touch Transfer Manager, transfer the templates to the printer.

(Please refer to the TD Series Software User’s Guide.)

(4)Program using P-touch Template 2.0 commands.

If any special commands are required to control the printer, change the terminal program in accordance with the P-touch Template 2.0 commands.

(Please refer to “6. Control Code Lists” on page 30.)

(5)Connect the printer with the host and print slips etc. Transfer the data such as ASCII text from the host to templates in the printer, and print the slips etc.

-3 -

P-touch Template 2.0 Command Reference

1. Using P-touch Template 2.0

P-touch Template 2.0 Command Reference

2. P-touch Template Settings Tool User’s Guide

(1) Command mode setting

(2) Template number setting

(3) Delimiter setting

(4) Print start trigger setting

(5) Print start command text

string setting

(6) Print start data amount setting

(7) Character code set setting

(8) International character set setting

(9) Prefix character setting

(10) Non-printed character setting

(11) Line feed character setting (12) FNC1 replacement setting

(13) Number of copies setting

(14) Print quality setting (15) Rotate setting

Applies settings for (1)	Closes the tool.
through (15) to the printer.	Returns (1) through (15) to their default settings.

- 4 -

2. P-touch Template Settings Tool User’s Guide

P-touch Template 2.0 Command Reference

(1)Command mode setting

-P-touch Template mode

To use P-touch Template 2.0, select the P-touch Template mode.

(2) Template number setting

Specify the template number selected as the default when the printer is turned on.

However, if any template has been set to not be transferred to the printer, the number of that template cannot be specified.

(3) Delimiter setting

A delimiter is the symbol used to indicate when to move to the next object in the data that is being sent. Between 1 and 20 characters can be specified.

(4) Print start trigger setting

Select one of the following three options for the print start trigger.

-Command Character

(Printing starts when the command character specified in (5) is received.)

-Data Insertion into All the Objects

(Printing starts when the delimiter for the last object is received.)

-Received Data Size

(Printing starts when the number of characters specified in (6) is received. However, delimiters are not counted in the number of characters.)

(5)Print start command text string setting

Specify 1 to 20 characters.

(6)Print start data amount setting

The amount of data that must be received before printing can begin can be set between 1 and 999.

(7) Character code set setting

Select one of the following three character code sets. For character code tables, refer to “Appendix B: Character Code Tables”.

-Windows1252

-Windows1250

-Brother standard

- 5 -

2. P-touch Template Settings Tool User’s Guide

P-touch Template 2.0 Command Reference

(8) International character set setting

Select one of the following countries for the character set.

-USA

-France

-Germany

-Britain

-Denmark I

-Sweden

-Italy

-Spain I

-Japan

-Norway

-Denmark II

-Spain II

-Latin America

-South Korea

-Legal

The following 12 codes are switched depending on the country selected from those listed above. 23h 24h 40h 5Bh 5Ch 5Dh 5Eh 60h 7Bh 7Ch 7Dh 7Eh

For the characters that are switched, refer to the “International character set table” in “Appendix B: Character Code Tables”.

(9) Prefix character setting

Change the prefix character code. Specify as a one-character character code.

The prefix character is the code for the first character that identifies commands that can be used in P-touch Template mode.

(10) Non-printed character setting

The characters specified here are not printed when data is received. Specify 1 to 20 characters.

(11) Line feed character setting

The line feed code is used when feeding data to indicate that the following data should be moved to the next line in a text object. One of the following four line feed codes can be selected, or 1 to 20 characters can be specified as the line feed code.

1.^CR

2.\0D\0A

3.\0A

4.\0D

- 6 -

2. P-touch Template Settings Tool User’s Guide

P-touch Template 2.0 Command Reference

(12) FNC1 replacement setting

This setting selects whether or not GS codes, which are included in barcode protocols such as GS1-128 (UCC/EAN-128), are replaced with FNC1 codes.

If the check box is selected, a received GS code is replaced with the FNC1 code. If the check box is cleared, a received GS code is outputted as is.

(13) Number of copies setting

Specify the number of copies. A number between 1 and 99 can be specified.

(14) Print quality setting

Select the print quality setting. If the check box is selected, priority is given to the print quality. If the check box is cleared, priority is given to the print speed.

(15) Rotate setting

Set print orientation. When the check box is checked, a print is 180 degrees rotated.

- 7 -

2. P-touch Template Settings Tool User’s Guide

P-touch Template 2.0 Command Reference

Others · ini file

After the [Set] button (in the main dialog box or the Communications Settings dialog box) is clicked, the settings are saved when the dialog box is closed.

C:\Users\(user_account_name)\App Data\Roaming\Brother\Printer Settings\ptsXX37.ini Note: A name of file “ptsXX37.ini” varies depending on printers like below.

- RJ-2030	pts3637.ini
- RJ-2050	pts3737.ini
- RJ-2140	pts3837.ini
- RJ-2150	pts3937.ini

Note: A file path above might be different depending on OS.

· Typing text into text boxes (3), (5), (9), (10) and (11)

Characters that can be entered as text can be typed in, and control codes can be entered as ASCII codes (00 to FF) with \ in front of them.

Example

PRINT	PRINT
Tab control code	\09
Line feed control code	\0D
\	\\

- 8 -

2. P-touch Template Settings Tool User’s Guide

P-touch Template 2.0 Command Reference

3. Examples for Using Commands

3.1 Example for using P-touch Template 2.0

Here is the label that will be made.

Steps

1.Make a template with P-touch Editor.

2.Transfer the template to Transfer Manager.

3.Transfer the template from Transfer Manager to the printer.

4.Use P-touch Template 2.0 commands for printing.

Step 1: Make a template with P-touch Editor.

Start the P-touch Editor and make a label.

- 9 -

3. Examples for Using Commands

P-touch Template 2.0 Command Reference

Step 2: Transfer the template to Transfer Manager.

The template sent in step 2 is stored in Transfer Manager, as shown below.

Assigned number

Stored template

Step 3: Transfer the template from Transfer Manager to the printer.

Click [Transfer] button.

- 10 -

3. Examples for Using Commands

P-touch Template 2.0 Command Reference

Note

Make sure that the printer is turned on and hooked up to the PC with a USB cable before using Transfer Manager. Also, make sure that the printer communication setting is always bidirectional communication when Transfer Manager is used.

When the template is transferred to the printer, the following message appears.

Step 4: Use P-touch Template 2.0 commands for printing.

When using P-touch Template 2.0 commands, at least these four commands are required. However, two out of the four can be set by using the P-touch Template Settings tool.

(1) Select the P-touch Template mode.

(2) Choose the assigned number.

After setting (1) and (2) with the P-touch Template Settings tool, the other two commands must be sent to the printer.

- 11 -

3. Examples for Using Commands

P-touch Template 2.0 Command Reference

(3) Initialize P-touch Template 2.0

Entered command

^II

(4) Print Start

Entered command

^FF

When the printer receives the command above, the label below is printed.

- 12 -

3. Examples for Using Commands

P-touch Template 2.0 Command Reference

3.2 Example for using ZPL II in P-touch Template 2.0

Here is the label that will be made.

406 dots (2 inches)		Example:
		A case 203dpi printer is used

290 dots

80 dots

Font is outline font, and size is 50, 50 dots.

609 dots (3 inches)

Steps

1.Change the mode to P-touch Template mode.

2.Set the label length with ^LL.

3.Set the label width with ^PW.

4.Send other ZPL II command.

Step 1: Change the mode to P-touch Template mode.

P-touch Template mode can be selected by using the P-touch Template Settings tool shown below.

Select P-touch Template mode.

- 13 -

3. Examples for Using Commands

P-touch Template 2.0 Command Reference

Step 2: Set the label length with ^LL.

The label length is 609 dots.

Entered command

^LL609

Step 3: Set the label width with ^PW.

The label width is 406 dots.

Entered command

^PW406

Step 4: Send other ZPL II commands.

The orientation of the text is 80, 290.

The font is outline font and size is 50, 50.

The text is “At your side.”

Entered command

^FO80,290

^A0N,50,50 ^FDAt your side

Summary -all commands to be sent to make the label-

^XA

^LL609

^PW406

^FO80,290

^A0N,50,50 ^FDAt your side ^XZ

Note

“^XZ” is the command required at the end of format with ZPL II commands.

- 14 -

3. Examples for Using Commands

P-touch Template 2.0 Command Reference

With those commands above, the label below is printed.

- 15 -

3. Examples for Using Commands

P-touch Template 2.0 Command Reference

3.3 Example for printing logo/external characters in P-touch Template 2.0

Here is the label to be printed.

Steps

1.Make a template and transfer it to the printer.

2.Store the logo/external characters as a bitmap file.

3.Transfer the bitmap file from Transfer Manager to the printer.

4.In the P-touch Template Settings tool, select the assigned number for the stored template.

5.With the P-touch Template commands, select the assigned number for the bitmap file.

Step 1: Make a template and transfer it to the printer.

				Assigned number
	Stored template
Click[Transfer] button.

- 16 -

3. Examples for Using Commands

P-touch Template 2.0 Command Reference

Step 2: Store the loge/external characters as a bitmap file. The file name should be started from “_ext_”,, and drag & drop it to Transfer Manager.

Example file name is “_ext_logo.bmp”

Step 3: Transfer the bitmap file from Transfer Manager to the printer.

Assigned number

Click[Transfer] button.

Step 4: In the P-touch Template Settings tool, select the assigned number for the stored template.

(1) Select the P-touch Template mode.

(2) Choose the assigned number.

- 17 -

3. Examples for Using Commands

P-touch Template 2.0 Command Reference

Step 5: With the P-touch Template 2.0 commands, select the assigned number for the bitmap file.

After using the P-touch Template Settings tool in Step 4, the remaining three commands must be sent to the printer.

(1) Initialize P-touch Template

(2) Select the bitmap file to be printed.

In order to select the bitmap file, enter a specific character

“\” and the value one less than the assigned number for the bitmap file that is shown in Step 3.

For example, if the assigned number for the bitmap file is 2, enter \01 as shown right.

Entered command

^II

Entered command

\01

(3) Start printing.

Entered command

^FF

When the printer receives the command above, the label below is printed.

- 18 -

3. Examples for Using Commands

P-touch Template 2.0 Command Reference

4. P-touch Template 2.0 Limitations

4.1 Relating to text objects

4.1.1 Font, size, etc.

Please also refer to “5.2 Relationship between the P-touch Editor settings and the printer image” on page 28

When a template is transferred to a printer, a font specified in P-touch Editor is changed to most similar resident font in the printer.

Character sizes specified in P-touch Editor are converted to the closest built-in character size when the data is sent to the printer.

Character sizes specified in P-touch Editor are all made the same size within an object.

Depending on the language of the computer used for transferring, either the Western European or the Eastern European character set is used for characters within text objects.

“\” is used as control character for an external character. When “\” has to be used as a data, input “\\”.

When “At Printing” check box is NOT checked, the time and date when editing P-touch Editor is applied and printed. When “At Printing” check box is checked, time and date is not printed.

“At Printing” setting

To cancel the “At Printing” setting for a date/time in P-touch Editor, display the properties for the Date and Time object, and then clear the “At Printing” check box.

- 19 -

4. P-touch Template 2.0 Limitations

P-touch Template 2.0 Command Reference

4.1.2 Character alignment

Horizontal alignment settings (“Justify” or “Equal Length”) specified in P-touch Editor are changed to the left alignment setting.

The setting for line feed with a line feed specified with the P-touch Editor can be set between 0 and 255 dots.

A negative line spacing setting cannot be used in P-touch Editor. In addition, since there is an upper limit for the line width with the printer, a line spacing setting larger than this limit specified in P-touch Editor will not be applied on the printer.

Specifying the line spacing setting in P-touch Editor

- 20 -

4. P-touch Template 2.0 Limitations

P-touch Template 2.0 Command Reference

4.1.3 Text Layout settings

Character styles specified in P-touch Editor all become the same style within an object.

If the “Long text” is selected under “Text Layout” in P-touch Editor, the text is always aligned at top left.

If the “Long Text” setting is selected under “Text Layout” in P-touch Editor and continuous length tape is used, the print length is increased to fit the text.

If the “Fixed Frame Size (Wrap)” setting is selected under “Text Layout” in P-touch Editor, the object size does not change, and the text size is reduced.

“Fixed Frame Size (Wrap)” is a setting that was added for inserting long text. Since it is possible that the text size may become extremely small if the wrapping feature is no longer applied, we recommend that “Fixed Frame Size” be selected when die-cut labels or a fixed length is specified in P-touch Editor, or that “Automatic Length” be selected when an automatic media length is specified.

	Shrink to Fit	The text object size is fixed, and the text size is changed depending on the text
		length.
	Clip Text	The text object size is fixed, and the text size is fixed. If the text is too long, the text
		is not printed.
	Long Text	The text object width is fixed, and the text size is fixed. If the text is too long, the text
		object height is increased.
	Automatic	The text object height is fixed, and the text size is fixed. If the text is too long, the
	Length	text object width is increased.
	Free Size	The text size is fixed. If the text is too long, the text object width is increased. If a
		new line is started, the text height is increased.

Specifying a Text Layout setting

Click the button circled in red to display a drop-down list, and then select the desired option.

- 21 -

4. P-touch Template 2.0 Limitations

P-touch Template 2.0 Command Reference

4.2 Relating to barcodes

4.2.1 Barcodes

When trying to transfer a template containing a barcode that is not compatible with the printer, an error will occur while transferring and the template cannot be transferred to the printer.

The following barcodes are compatible with the RJ-2XXX.

	1D barcodes	CODE39, ITF(I-2/5), UPC-A, UPC-E, EAN-13, EAN-8, CODABAR, CODE128,
		GS1-128(UCC/EAN-128) , RSS, POSTNET
	2D barcodes	PDF417, QR Code, Data Matrix, MaxiCode, Aztec

If data containing characters incompatible with the protocol are fed into the barcode object, that barcode object is not printed.

The barcode size may differ from that in the print result with P-touch Editor.

Since CODE128 and GS1-128(UCC/EAN-128) can easily be printed slightly larger, we recommend leaving larger margins when creating templates in P-touch Editor.

If data fed into a barcode in a template created with P-touch Editor causes an extremely long barcode, the barcode may not be fully printed.

Do not insert line feed immediately before or immediately after the barcode data. Otherwise, it will be considered as part of the barcode data. In that case, the barcode will be created containing the line feed code, or the barcode will not be printed since data incompatible with the barcode protocol is entered.

A delimiter or print start text string should be entered immediately after the barcode data.

- 22 -

4. P-touch Template 2.0 Limitations

P-touch Template 2.0 Command Reference

4.2.2 1D barcodes

A barcode wider than 22.5 cm will not be printed.

A 1D barcode taller than 1164 dots is converted to 1164dots.

The number of characters that can be entered for each protocol is shown below.

		1 to 50 characters (not including “*” on both sides)
	CODE39	When feeding data, the asterisks (*) at the beginning and end of the data are
		skipped.
	ITF	1 to 64 characters
	I-2/5	The bearer bar setting specified in P-touch Editor is invalid.
	EAN-8	7 characters
	EAN-13	12 characters
	UPC-A	11 characters
	UPC-E	6 characters
	CODABAR	3 to 64 characters (with “A”, “B”, “C” or “D” at the beginning and end)
	CODE128	1 to 64 characters
	GS1-128	1 to 64 characters
	(UCC/EAN-128)
	RSS-14	3 to 15 characters (begins with “01”)
	RSS Limited	3 to 15 characters (begins with “01”; third digit is “0” or “1”)
	RSS Expanded	1 to 64 numbers or 1 to 40 letters*
	POSTNET	5, 9 or 11 characters

* ISO646 characters can be printed.

<<numbers, letters, spaces, !, ”, %, &, ’, (, ), *, +, ,, -, ., /, :, ;, <, =, >, ? and _>>

When trying to transfer data exceeding the ranges described above, an error will occur while transferring. If the data that is fed does not meet the minimum limit, the barcode is not printed. If the data exceeds the maximum limit, only the data to the maximum limit is applied.

- 23 -

4. P-touch Template 2.0 Limitations

P-touch Template 2.0 Command Reference

4.2.3 2D barcodes

		The version setting for a QR Code specified in P-touch Editor is invalid. The
	QR Code	version setting must be turned off.
		The Structured Append settings specified in P-touch Editor are invalid.
		Since the error correction levels for PDF417 specified in P-touch Editor are
	PDF417	inconsistent with those on the printer, the size of the barcode may change when
		it is printed with P-touch Template 2.0.
		The Structured Append settings specified in P-touch Editor are invalid.
	Data Matrix	The Structured Append settings specified in P-touch Editor are invalid.
		Macro settings specified in P-touch Editor are invalid
		The Structured Append settings specified in P-touch Editor are invalid.
		The barcode is partitioned when too much data is entered.
		When specifying the country code and service class with P-touch Editor, the
	Maxi Code	number is entered at the beginning if the maximum number of characters is not
		reached. However, with the printer, the number is entered at the end.
		Example: “2” is specified.
		P-touch Editor: “200”; Printer: “002”
		The Remove Character setting specified in P-touch Editor is invalid.
		When the Number of Parts in the Set Structured Append setting is specified as
	Aztec	Auto, the number of appended blocks becomes 2.
		The Code Spacing and Join Vertically in the Set Structured Append settings
		specified in P-touch Editor are invalid.

- 24 -

4. P-touch Template 2.0 Limitations