Breville BKC700XL, XXBKC600XL User Manual

0 (0)

Gourmet Single Cup Brewer™

Instruction Booklet Livret d’instructions

BKC600XL / BKC700XL

CONGRATULATIONS

On the purchase of your new

Breville Gourmet Single Cup Brewer™

CONTENTS

4 Breville recommends safety first

6Know your Breville Gourmet Single Cup Brewer™

8Operating your Breville Gourmet Single Cup Brewer™

9- Installing the water filter

10- One-time priming process

12

- Brewing a K-Cup®

14

- Brewing with the My K-Cup®

18

- Stopping the brew process

18

- Brewing hot water

18

- Refilling the water tank

19

- Purging the brewer

20

Menu and programming options

21

- Setting the ‘CLOCK SET’ feature

22

- Setting the ‘ON-OFF TIME’ feature

23

- Setting the ‘AUTO OFF’ feature

24

- Setting the ‘BREW TEMP’ feature

24

- Setting the ‘BREW SIZE’ feature

26

Care and cleaning

27

- Cleaning the brewer housing

27

- Cleaning the K-Cup® holder

28

- Cleaning the My K-Cup®

28

- Cleaning the water tank and lid

28

- Cleaning the water filter

28

- Descaling the brewer

30

- Storage

32

Trouble shooting

34

One year limited warranty

36

French

BREVILLE RECOMMENDS SAFETY FIRST

We at Breville are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions:

Important safeguards

Read all instructions before use & save for future reference

This appliance is for household use only.

Do not use this appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors.

To protect against fire, electrical shock and injury to persons, do not immerse the appliance, cord or plug in water or any other liquid.

Do not leave the appliance unattended when in use.

Close supervision is necessary when the appliance is used by or near children.

Always use the appliance on a dry, level surface.

Do not place this appliance on or near a hot gas or electric burner, or where it could touch a heated oven.

Do not touch hot surfaces. Use handles and knobs where available.

Do not let the cord hang over the edge of a table or counter, touch hot surfaces or become knotted.

The use of accessory attachments not recommended by Breville may cause a risk of injury to persons, fire or electric shock.

Do not overfill the Water Tank.

Always keep the Water Tank Lid on the Water Tank unless you are refilling it.

Use only water in this appliance. Do not put any other liquids or foods in the Water Tank except as instructed in Care and Cleaning (page 26).

There are two sharp needles that puncture the K-Cup®. One on the underside of the Brewing Chamber Head, and the other in the base of the K-Cup® Holder. To avoid risk of injury, do not put your fingers in the Brewing Chamber or K-Cup® Holder.

There is extremely hot water in the K-Cup® Holder during the brewing process. To avoid risk of injury, do not raise the Safety Locking Arm or open the Brewing Chamber during the brewing process.

To turn off the appliance, press and release the Power Switch on the lower back, right side of the Brewer to the ‘OFF’ status and then remove the plug from the wall outlet.

Always switch the appliance to the ‘OFF’ status and then remove the plug from the wall outlet when the appliance is not being used and before cleaning. Allow the appliance to cool before reassembling or removing parts and before cleaning the appliance.

Strictly follow the Care and Cleaning instructions (page 26).

This appliance is equipped with a power cord having a grounding wire with a grounding plug. The appliance must

be grounded using a 3-hole properly grounded outlet. In the event of an electrical short circuit, grounding reduces the risk of electrical shock.

BREVILLE RECOMMENDS SAFETY FIRST

If the outlet is a standard 2-prong wall outlet, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord or use an adapter.

Consult a qualified electrician if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.

Regularly inspect the supply cord, plug and actual appliance for any damage. Do not operate if damaged in anyway or after the appliance malfunctions. Immediately cease use of the appliance and call Breville Customer Service at 1-866-BREVILLE for examination, repair or adjustment.

For any maintenance other than cleaning, call Breville Customer Service at 1-866-BREVILLE.

NOTE:

Your Breville appliance comes with the unique Assist™ Plug, conveniently designed with a finger hole in the power plug for easy and safe removal from the wall outlet. For safety reasons it is recommended you plug your Breville appliance directly into its

own electrical outlet on a dedicated circuit separate from other appliances. If the electric circuit is overloaded with other appliances, your Brewer may not function properly. Use in conjunction with a power strip or extension cord is not recommended.

short cord instructions

Your Breville appliance is fitted with a short power supply cord as a safety precaution to prevent personal injury or property damage resulting from pulling, tripping or becoming entangled with a longer cord. Do not allow children to use or be near this appliance without close adult supervision. If an extension cord is used, (1) the marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance, (2) the cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally and (3) the extension cord must include a 3-prong grounding plug.

TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT REMOVE THE BASE PANEL. NO USER SERVICEABLE PARTS ARE INSIDE. REPAIR SHOULD BE DONE ONLY BY AUTHORIZED PERSONNEL ONLY.

SAVE THESE INSTRUCTIONS

for household use only

4

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Breville BKC700XL, XXBKC600XL User Manual

know your breville gourmet single cup brewer™

 

BREVILLE RECOMMENDS SAFETY FIRST

 

 

 

 

 

 

 

 

 

 

A Water tank lid

F

Drip tray plate

K

Brewing chamber head

P

My K-Cup® measuring scoop

B 60oz (1.8L) Water tank

G

Drip tray level indicator

L

Brewing chamber

Q

My K-Cup® lid

C Upper filter holder

H

Drip tray

M LCD screen

R

My K-Cup® filter basket

D Replaceable charcoal filter

I

K-Cup® holder

N Control panel

S

My K-Cup® holder

E Lower filter holder

J

Safety locking arm

O My K-Cup® / K-Cup®

T

Power Switch

 

 

 

 

holder storage

 

 

NOTE:

To order replacement Charcoal Filters, call Breville Customer Service at 1-866-BREVILLE or visit www.breville.com

6

 

 

 

 

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OPERATING

your new Breville Gourmet Single Cup Brewer™

Operating your breville gourmet single cup brewer™

Installing the water filter

For the best tasting gourmet coffee, tea or hot cocoa, Breville recommends using bottled or filtered water.

The Water Filter provided with the Brewer can significantly reduce substances that affect the smell and taste of water such as free chlorine, certain pesticides and organic impurities as well as traces of heavy metals.

NOTE:

The Water Filter can be removed from the Brewer.

If you choose to install the Water Filter, it is recommended to replace the Charcoal Filter every 2 months or 60 tank refills, more often if you have hard water.

We recommend removing the Water Filter if using filtered water, or if you choose not to replace the Charcoal Filter every 2 months, as the filter may clog and affect the smell and taste of the water.

If you choose not to install the Water Filter, you are ready to start the One-time Priming Process (page 10).

NOTE:

Do not use water that has been treated by a 'water softener'. The increase in sodium levels in the water can cause scaling in the brewer and hinder its performance.

Follow these steps each time you install a new Charcoal Filter to ensure it filters optimally.

1.Remove the Water Tank from the Brewer by gripping the handle located on the left side of the Water Tank, then lift upwards.

2.Remove the Water Tank Lid.

3.Rinse the Water Tank with fresh water and replace back onto the Brewer.

4.Remove the Upper and Lower Filter Holder and Charcoal Filter from the polybag. Unwrap the Charcoal Filter from its protective plastic.

5.Soak the Charcoal Filter for 5 minutes then rinse for 30 seconds. It is normal to see a grey residue after soaking the filter.

6.Wash the Lower Filter Holder, ensuring the stainless steel mesh is free of residue.

7.Insert the Charcoal Filter into the Upper Filter Holder, then attach the Lower Filter Holder so it locks into place.

9

Operating your breville gourmet single cup brewer™

8.Set the date dial on the Upper Filter Holder 2 months ahead. This will remind you when the Charcoal Filter will need to be replaced.

9.Place the assembled Filter Holder into the Water Tank, aligning so the date dial is visible from outside the Tank. Push down hard on the assembled Filter Holder until it snaps into place.

10.Your Brewer is ready for the one-time priming process.

NOTE:

Replace the Charcoal Filter every 2 months, or 60 tank refills, more if you have hard water.

To order replacement Charcoal Filters, call Breville Customer Service at 1-866-BREVILLE or visit www.breville.com.

We recommend removing the Water Filter if you choose not to replace the Charcoal Filter every 2 months, as the filter may clog and affect the smell and taste of the water.

One-time priming process

Priming fills the internal tank with water and cleanses the brewing system. You cannot use your Brewer until it has been primed for its first use.

NOTE:

If the Brewer has been exposed to temperatures below freezing, allow the Brewer at least two hours to reach room temperature before priming. A frozen or extremely cold Brewer will not prime properly and can cause damage.

1.Unwrap the power cord and plug the Brewer into a grounded outlet.

2.Place a 12 oz. mug on the Drip Tray Plate. The drip tray plate and drip tray can be removed to accomodate taller mugs and travel mugs.

3.Fill the Water Tank with water up to the 'MAX' mark on the viewing window.

The Water Tank can be filled in two ways:

a)Remove the Water Tank Lid and pour water directly into the Water Tank while it is still attached to the Brewer, then replace the Lid.

b)Remove the Water Tank Lid, then gripping the handle located on the left side of the Water Tank, lift upwards. Fill with water. Place the Water Tank back onto the Brewer and replace the Lid.

NOTE:

Do not use water that has been treated by a 'water softener'. The increase in sodium levels in the water can cause scaling in the brewer and hinder its performance.

4.Press and release the Power Switch located on the lower back, right side of the Brewer. The Power Switch is spring loaded and will return to its original position.

NOTE:

For BKC600XL priming information, please refer to page 30.

5.The Water Tank LED and LCD screen will illuminate. The Brewer will automatically fill with water and make a quiet vibrating sound. This is normal. The LCD screen will indicate 'HEATING'.

Operating your breville gourmet single cup brewer™

NOTE:

If the Water Tank is empty or not in place on the Brewer, the Water Tank LED’s will flash and the LCD screen will indicate ‘REFILL TANK’. None of the control panel buttons will be active until water is added to the Water Tank.

6.Once the water is heated, the LCD screen will indicate 'OPEN HEAD'. Open the Brewing Chamber Head by raising and lowering the Safety Locking Arm completely. Do not insert a K-Cup® during this process. This will allow you to run a cleansing brew. The 'BREW' button will now be illuminated.

7.Press the 'BREW' button. This will start a cleansing brew which will complete the priming sequence. Hot water will flow into your mug. When the water flow stops, discard the hot water.

NOTE:

The Brewer will take about 4 minutes to heat up during the priming process.

8.The LCD screen will indicate ‘HEATING’ as the Brewer heats the water for the next brew cycle. Once the water is heated, the LCD screen may indicate ‘REFILL TANK’.

9.Fill the Water Tank with water up to the 'MAX' mark on the viewing window.

10.The LCD screen will indicate ‘OPEN HEAD’. Open the Brewing Chamber Head by raising and lowering the Safety Locking Arm completely. The LCD screen will indicate ‘READY TO BREW’.

11.The one-time priming process is now complete and you are ready for your first K-Cup® brew (page 12) or My K-Cup® brew (page 14).

10

 

 

 

 

11

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Operating your breville gourmet single cup brewer™

Brewing a K-Cup®

1.Follow the instructions, Installing the Water Filter (page 9) and the One-time Priming Process (page 10). The Brewer should be turned on and the Water Tank should be filled and illuminated.

2.The LCD screen will indicate ‘READY

TO BREW’. The and buttons will illuminate and the ‘BREW’ button will illuminate and flash for up to

60 seconds.

NOTE:

If the ‘BREW’ button is not pressed in 60 seconds, the LCD screen

will indicate ‘OPEN HEAD’ and the ‘BREW’ button will be disabled to prevent accidental activation. To re-activate the brew sequence, open the Brewing Chamber Head by raising and lowering the Safety Locking Arm completely.

3.Place a cup or mug on the Drip Tray Plate. The drip tray plate and drip tray can be removed to accomodate taller mugs and travel mugs.

4.Raise the Safety Locking Arm. The Brewing Chamber will open toward you.

5.Select a K-Cup®.

6.Place the K-Cup® in the K-Cup® Holder (located in the Brewing Chamber). Do not remove the foil lid or puncture the K-Cup®.

NOTE:

There are two sharp needles that puncture the K-Cup®. One on the underside of the Brewing Chamber Head and the other in the base of the K-Cup® Holder. To avoid risk of injury, do not put your fingers in the Brewing Chamber or K-Cup® Holder.

7.Lower the Safety Locking Arm to close the Brewing Chamber Head over the K-Cup® Holder. When closed

completely, the LCD screen will indicate

‘READY TO BREW’. The and buttons will illuminate and the ‘BREW’ button will illuminate and flash for up to 60 seconds.

Operating your breville gourmet single cup brewer™

a)The LCD screen will indicate the default brew size (7.25 oz.). To choose

a different size, press the button to go up in size or the button to go down in size.

NOTE:

Select from a stronger small cup (5.25 oz. serving), a small mug (7.25 oz. serving), a large mug (9.25 oz. serving), a travel mug (11.25 oz. serving) or iced beverage setting (3.25oz serving). The iced beverage setting is only available on the the BKC700XL.

The small mug (7.25 oz. serving) is the default brew size.

To program your favorite brew size, refer to Setting the ‘BREW SIZE’ feature (page 24).

NOTE:

To use the iced beverage setting, place a tall glass filled with ice on the drip tray. Use your favorite K-Cup®, select the iced beverage brew size button. Add more ice once brewing is complete, add cream and sugar if desired. The iced beverage setting is only available on the BKC700XL.

b)Once the brew size is selected, press the ‘BREW’ Button. The ‘BREW’

button will stop flashing, the and buttons will no longer be lit. The LCD screen will indicate ‘BREWING’ and the selected brew size.

NOTE:

If the ‘BREW’ button is not pressed in 60 seconds, the LCD screen

will indicate ‘OPEN HEAD’ and the ‘BREW’ button will be disabled to prevent accidental activation. To re-activate the brew sequence, open the Brewing Chamber Head by raising and lowering the Safety Locking Arm completely.

8.The LCD screen will indicate ‘BREWING’, however there may be a short pause before the brewing process begins. The process lasts about 60 seconds and ends with a burst of air to remove all liquid from the K-Cup®.

12

 

 

 

 

13

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Operating your breville gourmet single cup brewer™

NOTE:

There is extremely hot water in the K-Cup® Holder during the brewing process. To avoid risk of injury, do not raise the Safety Locking Arm or open the Brewing Chamber during the brewing process.

Following the brew, the LCD screen will indicate ‘HEATING’ as the Brewer heats the water for the next brew cycle. This process lasts about 15 seconds. The pump will make a vibrating sound. This is normal.

9.Raise the Safety Locking Arm, remove and dispose of the used K-Cup®. Use caution as the K-Cup® will be hot.

10.Enjoy your first cup of gourmet coffee, tea or hot cocoa!

11.The LCD screen will indicate ‘READY TO BREW’, indicating that the next K-Cup® can be inserted for the next brew cycle.

Brewing with the My K-Cup® Accessory

The Breville Gourmet Single Cup Brewer™ comes with a My K-Cup® accessory. The dishwasher safe, reusable My K-Cup® allows you to use your own grind of coffee so you can adjust the amount and type of coffee to suit your tastes. Along with the included measuring scoop, this accessory conveniently stores in the easy open compartment on top of the brewer.

1.Follow the instructions, Installing the Water Filter (page 9) and the One-time Priming Process (page 10). The Brewer should be turned on and the Water Tank should be filled and illuminated.

NOTE:

Do not use water that has been treated by a 'water softener'. The increase in sodium levels in the water can cause scaling in the brewer and hinder its performance.

2.The LCD screen will indicate ‘READY TO BREW’.

NOTE:

If the ‘BREW’ button is not pressed in 60 seconds, the LCD screen

will indicate ‘OPEN HEAD’ and the ‘BREW’ button will be disabled to prevent accidental activation. To re-activate the brew sequence, open the Brewing Chamber Head by raising and lowering the Safety Locking Arm completely.

3.Place a cup or mug on the Drip Tray Plate. The drip tray plate and drip tray can be removed to accomodate taller mugs and travel mugs.

Operating your breville gourmet single cup brewer™

4.Open the storage compartment located on top of the Brewer by pressing the finger indent on the right side. Remove the My K-Cup® accessory.

5.Disassemble the My K-Cup® accessory by removing the Lid from the Holder in a counterclockwise direction. Remove the Filter Basket from the Holder.

6.Wash the My K-Cup® Lid, Filter Basket and Holder in warm soapy water prior to first use. Rinse and dry thoroughly.

7.Insert the Filter Basket into the Holder.

8.Use the My K-Cup® Measuring Scoop to fill the Filter Basket with 1 level scoop maximum of coffee. 1 level scoop is equivalent to 2 tablespoons. Alternatively, there are line markings on the inside

of the Filter Basket that indicate 1 tablespoon and 2 tablespoons so you can adjust the amount of coffee to your personal preference. Do not fill the Filter Basket with more than one level scoop of coffee or tamp the grinds. Ensure the coffee remains loose and there are no coffee grinds remaining on the upper rim of the Filter Basket. Screw on the Lid to seal.

NOTE:

1 level scoop = 2 tablespoons

We recommend this for the small mug 7.25 oz. serving.

Or, if you like a stronger brew, select the small cup 5.25 oz. serving.

If you grind your own beans:

1.Start with a coarser grind similar to a French Press grind.

2.Experiment with grinds similar to drip brewing grinds.

3.Avoid a fine espresso grind setting that could clog the Filter Basket or result in poor extraction.

9.Raise the Safety Locking Arm. The Brewing chamber will open toward you.

10.Place the assembled My K-Cup® Holder into the Brewing Chamber. To do this:

a)Remove the K-Cup® Holder from the Brewing Chamber (10a). Store the K-Cup® Holder in the My K-Cup® Storage compartment located on top of the Brewer.

b)Insert the assembled My K-Cup® Holder into the Brewing Chamber

(10b), ensuring to align the arrow on the My K-Cup® Lid with the arrow in the Brewing Chamber.

14

 

 

 

 

15

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Operating your breville gourmet single cup brewer™

NOTE:

There are two sharp needles used to puncture the K-Cup® and My K-Cup® Holder. One in the base of the K-Cup® Holder, the other on the underside of the Brewing Chamber Head. To avoid risk of injury, use caution when inserting or removing the K-Cup®, K-Cup® Holder or My K-Cup® Holder.

11.Lower the Safety Locking Arm to close the Brewing Chamber Head over the My K-Cup® Holder. When closed completely, the LCD screen will indicate

‘READY TO BREW’. The and buttons will illuminate and the ‘BREW’ button will illuminate and flash for up to 60 seconds.

a)The LCD screen will indicate the default brew size (7.25 oz.). To

choose a different size, press the

to go up in size or the button to go down in size.

NOTE:

Select from a stronger small cup (5.25 oz. serving), a small mug (7.25 oz. serving), a large mug (9.25 oz. serving), a travel mug (11.25 oz. serving) or iced beverage setting (3.25oz serving). The iced beverage setting is only available on the the BKC700XL.

The small mug (7.25 oz. serving) is the default brew size.

To program your favorite brew size, refer to Setting the ‘BREW SIZE’ feature (page 24).

NOTE:

To use the iced beverage setting, place a tall glass filled with ice on the drip tray. Use your favorite K-Cup®, select the iced beverage brew size button. Add more ice once brewing is complete, add cream and sugar if desired. The iced beverage setting is only available on the BKC700XL.

b)Once the brew size is selected, press the ‘BREW’ Button. The ‘BREW’ button will stop flashing,

the and buttons will no longer be lit. The LCD screen will indicate ‘BREWING’ and the selected

brew size.

Operating your breville gourmet single cup brewer™

NOTE:

If the ‘BREW’ button is not pressed in 60 seconds, the LCD screen

will indicate ‘OPEN HEAD’ and the ‘BREW’ button will be disabled to prevent accidental activation. To re-activate the brew sequence, open the Brewing Chamber Head by raising and lowering the Safety Locking Arm completely.

12.The LCD screen will indicate ‘BREWING’, however there may be a short pause before the brewing process begins. The process lasts about 60 seconds and ends with a burst of air to remove all liquid from the My K-Cup® Holder.

NOTE:

There is extremely hot water in the My K-Cup® Holder during the brewing process. To avoid risk of injury, do not raise the Safety

Locking Arm or open the Brewing Chamber during the brewing process.

Following the brew, the LCD screen will indicate ‘HEATING’ as the Brewer heats the water for the next brew cycle. This process lasts about 15 seconds. The pump will make a vibrating sound. This is normal.

13.Raise the Safety Locking Arm, remove the assembled My K-Cup® Holder. Use caution as the My K-Cup® Holder will be hot.

14.Disassemble the My K-Cup® Holder by removing the Lid from the Holder in a counter-clockwise direction. Remove the Filter Basket from the Holder, discard the grounds and rinse out the Filter Basket and Holder.

15.15. Enjoy your first cup of gourmet coffee, tea or hot cocoa!

16

 

 

 

 

17

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Operating your breville gourmet single cup brewer™

NOTE:

The My K-Cup® accessory is designed for ground coffee only. Do not:

a)Use a K-Cup® or coffee pod in the My K-Cup® Filter Basket.

b)Use the My K-Cup® Filter Basket with the K-Cup® Holder After brewing with the My K-Cup® accessory, the K-Cup® Holder must be inserted into the Brewing Chamber in order to brew a K-Cup®.

To replace the K-Cup® Holder, raise the Safety Locking Arm, and remove the My K-Cup® Holder. Insert K-Cup® Holder into the Brewing Chamber, aligning the arrow on the K-Cup® Holder with the arrow in the Brewing Chamber. Use caution when doing this as there

is a sharp needle on the underside of the Brewing Chamber Head that punctures the K-Cup®.

SROPPING THE BREW PROCESS

To stop brewing after the process has started, press and release the Power Switch on the right side of the Brewer to the ‘OFF’ status. The flow of coffee, tea or hot cocoa will stop, the heating element will shut off and the LED’s illuminating the Water Tank will no longer be lit. The LCD screen will indicate the time, ‘ON-OFF TIME’ and ‘AUTO OFF’. None of the control panel buttons will be active until the Brewer is turned back on.

NOTE:

You may get less coffee, tea or hot cocoa during your next brew. After a terminated brew, we recommend that you follow the instructions for Brewing hot water (page 18). Your next brew will then dispense the correct volume according to the brew size you have selected.

Brewing hot water

The Brewer is able to dispense a cup of hot water for making hot chocolate in a packet, for use in cooking, for making soups, etc.

Follow the instructions Brewing a K-Cup® (page 12), without inserting a K-Cup®.

NOTE:

After brewing a hot cocoa K-Cup®, or stopping the brew process mid-cycle, we recommend running a hot water brew cycle.

Refilling the water tank

The LCD screen will indicate ‘REFILL TANK’ when the water level in the Water Tank is low or if the Water Tank has been removed.

1.Fill the Water Tank with water up to the 'MAX' mark on the viewing window. The Water Tank can be filled in two ways:

a)Remove the Water Tank Lid and pour water directly into the Water Tank while it is still attached to the Brewer, then replace the Lid.

b)Remove the Water Tank Lid, then gripping the handle located on the left side of the Water Tank, lift upwards. Fill with water. Place the Water Tank back onto the Brewer and replace the Lid.

Operating your breville gourmet single cup brewer™

2.The LCD screen will indicate either:

a)‘OPEN HEAD’. Raise and lower the Safety Locking Arm completely.

b)‘HEATING’ as the Brewer heats the water for the next brew cycle. This process lasts about 15 seconds. The pump will make a vibrating sound. This is normal.

3.Once the Safety Locking Arm is opened and lowered, or the water is heated, the LCD screen will indicate ‘READY TO BREW’, indicating the brew cycle

can begin. The and buttons will illuminate and the ‘BREW’ button will illuminate and flash for up to 60 seconds.

NOTE:

If the ‘BREW’ button is not pressed in 60 seconds, the LCD screen

will indicate ‘OPEN HEAD’ and the ‘BREW’ button will be disabled to prevent accidental activation. To re-activate the brew sequence, open the Brewing Chamber Head by raising and lowering the Safety Locking Arm completely.

Do not remove the Water Tank during the brewing process.

Purging the brewer

If the Brewer has not been used for more than one week, you should renew the water from the inner tank by purging the brewer.

1.If there is water in the Water Tank, remove the Water Tank Lid, then gripping the handle located on the left side of

the Water Tank, lift upwards. Discard the water, rinse and refill with bottled or filtered water. Place the Water Tank back onto the Brewer and replace the Lid.

2.If there is no water in the Water Tank, refill with water. Place the Water Tank back onto the Brewer and replace the Lid.

3.Ensure the Brewer is turned on. Raise and lower the Safety Locking Arm on the Brewer without inserting a K-Cup®.

4.The LCD screen will indicate ‘READY TO BREW’ and the ‘BREW’ button will illuminate and flash.

5.The LCD screen will indicate the default brew size (7.25 oz. serving unless programmed otherwise). Select the largest brew size (11.25 oz. serving) by pressing the button on the control panel.

6.Place a 12 oz. mug on the Drip Tray Plate. The drip tray plate and drip tray can be removed to accomodate taller mugs and travel mugs.

7.Press the ‘BREW’ button. Hot water will flow into your mug. When the flow stops, discard the hot water.

8.Repeat this process 2 more times to completely renew the water from inner tank.

18

 

 

 

 

19

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MENU & PROGRAMMING

your new Breville Gourmet Single Cup Brewer™

Menu & programming options

Setting the ‘CLOCK SET’ feature

Setting the clock is optional. When the clock is set, the time will appear on the LCD screen.

5.Press the or button to reach the appropriate minute.

6.Once the appropriate minute is reached, press the ‘OK’ button. The LCD screen will return to the menu programming options.

NOTE:

You must set the clock if using the ‘ON-OFF TIME’ feature.

1.Press the ‘MENU’ button. The menu programming options will appear on the LCD screen with a blinking indicator on ‘CLOCK SET’.

2.Press the ‘OK’ button. The hour will blink, indicating the hour is ready to be set.

3.Press the or button to reach the appropriate hour. If the hour has passed 12, the indicator switches from AM

to PM.

4.Once the appropriate hour is reached, press the ‘OK’ button. The minutes will blink, indicating that the minutes are ready to be set.

7.To exit the menu programming options, press the ‘MENU’ button. Alternatively,

press the button to reach ‘EXIT MENU’ and press the ‘OK’ button. The LCD screen will return to the main screen and indicate the time selected.

NOTE:

If power is interrupted to the Brewer, the clock will need to be reset. Programmed brew size and brew temperature settings are remembered and restored

automatically. All other settings will be restored automatically after the clock is reset.

21

Menu & programming options

Setting the ‘ON-OFF TIME’ feature

This feature allows you to program the specific time when the Brewer will automatically turn on and/or off. By

programming your Brewer to automatically turn on, you will not have to wait for the Brewer to heat the water in the Water Tank. It will take the Brewer approximately 3½ minutes to heat the water from room temperate.

NOTE:

You must set the clock if using the ‘ON-OFF TIME’ feature.

An alternative to setting the ‘ON-OFF TIME’ feature is to leave the Brewer on all the time.We recommend this so your Brewer is always ready to brew a fresh cup of gourmet coffee, tea or hot cocoa.

To turn the Brewer off at any time, press and release the Power Switch on the lower back, right side of the Brewer. The clock will remain on if set, however you can not activate the brew cycle. Press and release the Power Switch again to restore power to the Brewer. You will have to wait for the water to heat up before the Brewer is ready to brew.

1.Press the ‘MENU’ button. The menu programming options will appear on the LCD screen with a blinking indicator on ‘CLOCK SET’.

2.Press the button to reach ‘ON-OFF TIME’.

3.Press the ‘OK’ button.

4.Press the or button to see the two options:

a)‘ON-OFF TIME’ will be ‘INACTIVE’, indicating that the Brewer will not turn on or off automatically. Press the ‘OK’ button to select this option. The LCD screen will return to the menu programming options.

b)‘ON-OFF TIME’ will be ‘ACTIVE’, indicating the Brewer will automatically turn on and/or off according to the specific times you set. Press the ‘OK’ button to select this option.

Setting the ‘ON TIME’

i)The LCD screen will display ‘ON TIME’, indicating that the time you wish the Brewer to automatically turn on is ready to be set. The hour will blink, indicting the hour is ready to be set.

ii)Press the or button to reach

the appropriate hour. If the hour has passed 12, the indicator switches from AM to PM.

iii)Once the appropriate hour is reached, press the ‘OK’ button. The minutes will blink, indicating that the minutes are ready to be set.

iv)Press the or button to reach the appropriate minute.

Menu & programming options

v)Once the appropriate minute is reached, press the ‘OK’ button. The LCD screen will display ‘OFF TIME’, indicating that the time you wish the Brewer to automatically turn off is ready to be set.

Setting the ‘OFF TIME’

i)Follow the instructions (ii to iv) for Setting the ‘ON TIME’.

ii)Once the appropriate time is reached, press the ‘OK’ button. The LCD screen will return to the menu programming options

5.To exit the menu programming options, press the ‘MENU’ button. Alternatively,

press the button to reach

‘EXIT MENU’ and press the ‘OK’ button. The LCD screen will return to the main screen and indicate whether you have activated the ‘ON-OFF TIME’ feature.

NOTE:

If you want to brew outside the ‘ON TIME’ and ‘OFF TIME’ selected, press and release the Power Switch on the lower back, right side of the Brewer to restore power. You will have to wait for the water to heat up before the Brewer is ready to brew.

Setting the ‘AUTO OFF’ Feature

This feature automatically turns the Brewer off after 2 hours from the last brew.

1.Press the ‘MENU’ button. The programming options will appear on the LCD screen with a blinking indicator on ‘CLOCK SET’.

2.Press the button to reach ‘AUTO OFF’.

3.Press the ‘OK’ button.

4.Press the or button to see the two options:

a)‘AUTO OFF’ will be ‘INACTIVE’ and the LCD screen will display ‘- - -’, indicating that the Brewer will not turn off automatically. Press the ‘OK’ button to select this option. The LCD screen will return to the menu programming options.

b)‘AUTO OFF’ will be ‘ACTIVE’ and the LCD screen will display ‘2 hr’, indicating the Brewer will automatically turn off after 2 hours. Press the ‘OK’ button. The LCD screen will return to the menu programming options.

22

 

 

 

 

23

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Loading...
+ 27 hidden pages