Bosch VG4-A-PSU0, VG4-A-PSU1, VG4-A-PSU2 User Manual

0 (0)

AutoDome Power Supply

Boxes

VG4-A-PSU0 | VG4-A-PSU1 | VG4-A-PSU2

en Installation Guide

AutoDome Power Supply Boxes

Table of Contents | en 3

 

 

Table of Contents

 

 

 

 

1

Important Safety Instructions

5

1.1

Safety precautions

5

1.2

Important safety instructions

6

1.3

Important Notices

8

1.4

UL certification

10

1.5

Bosch notices

10

 

 

 

2

Installing the Power Supply Box

12

2.1

Unpacking

12

2.1.1

Parts List

12

2.1.2

Optional Parts List

12

2.1.3

Description

13

2.1.4

Tools Required

13

2.2

Pre-installation Check List

13

2.3

Mount the Power Supply Box

15

2.3.1

Attach Cover Door

16

2.4

Route Wires and Attach Connectors

18

2.4.1

Methods for Routing Wires

18

2.4.2

Wiring the Power Supply Box

21

2.4.3

Power Supply Box Connections

22

Bosch Security Systems, Inc.

Installation Guide

F.01U.250.895 | 1.0 | 2011.08

4 en | Table of Contents

AutoDome Power Supply Boxes

 

 

 

 

 

 

 

 

3

Cable and Wire Standards

 

24

3.1

Power

 

24

3.2

Wire Distance Guide

 

24

3.3

Video and Control Cables

 

25

3.3.1

Using Coaxial Cable to Transmit Video and Control

25

3.3.2

Using UTP to Transmit Video and Control

26

3.3.3

Using Ethernet to Transmit Video and Control

27

3.3.4

Using Multi-mode Fiber Optic to Transmit Video and Control

27

3.3.5Using a Fiber Optic Ethernet Media Converter to Transmit Video

 

and Control

28

3.4

Control-only Cables

29

3.4.1

Controlling the AutoDome via Biphase

29

3.4.2

Controlling the AutoDome via the RS232 Protocol

30

3.4.3

Controlling the AutoDome via the RS485 Protocol

32

3.5

Fiber Optic Module with an RS232/RS422 Controller

34

3.5.1Connecting to an LTC 4629 Head End Data/Video Transceiver 34

3.5.2

Configuring the VG5 AutoDome

34

3.6

Audio Cables

36

F.01U.250.895 | 1.0 | 2011.08

Installation Guide

Bosch Security Systems, Inc.

Bosch VG4-A-PSU0, VG4-A-PSU1, VG4-A-PSU2 User Manual

AutoDome Power Supply Boxes

Important Safety Instructions | en

5

 

 

 

1Important Safety Instructions

Read, follow, and retain all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operation.

1.1Safety precautions

DANGER!

High risk: This symbol indicates an imminently hazardous situation such as “Dangerous Voltage” inside the product. If not avoided, this will result in an electrical shock, serious bodily injury, or death.

WARNING!

Medium risk: Indicates a potentially hazardous situation.

If not avoided, this could result in minor or moderate bodily injury.

CAUTION!

Low risk: Indicates a potentially hazardous situation.

If not avoided, this could result in property damage or risk of damage to the unit.

NOTICE!

This symbol indicates information or a company policy that relates directly or indirectly to the safety of personnel or protection of property.

Bosch Security Systems, Inc.

Installation Guide

F.01U.250.895 | 1.0 | 2011.08

6 en | Important Safety Instructions

AutoDome Power Supply Boxes

 

 

1.2Important safety instructions

Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the unit.

1.Cleaning - Unplug the unit from the outlet before cleaning. Follow any instructions provided with the unit. Generally, using a dry cloth for cleaning is sufficient but a moist, flufffree cloth or leather shammy may also be used. Do not use liquid cleaners or aerosol cleaners.

2.Water - Do not use this unit near water, for example near a bathtub, washbowl, sink, laundry basket, in a damp or wet basement, near a swimming pool, in an outdoor installation, or in any area classified as a wet location. To reduce the risk of fire or electrical shock, do not expose this unit to rain or moisture.

3.Object and liquid entry - Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electrical shock. Never spill liquid of any kind on the unit. Do not place objects filled with liquids, such as vases or cups, on the unit.

4.Power cord and plug protection - Protect the plug and power cord from foot traffic, being pinched by items placed upon or against them at electrical outlets, and its exit from the unit. For units intended to operate with 230 VAC, 50 Hz, the input and output power cord must comply with the latest versions of IEC Publication 227 or

IEC Publication 245.

5.Power disconnect - Units have power supplied to the unit whenever the power cord is inserted into the power source. The power cord plug is the main power disconnect device for switching off the voltage for all units.

F.01U.250.895 | 1.0 | 2011.08

Installation Guide

Bosch Security Systems, Inc.

AutoDome Power Supply Boxes

Important Safety Instructions | en

7

 

 

 

6.Power sources - Operate the unit only from the type of power source indicated on the label. Before proceeding, be sure to disconnect the power from the cable to be installed into the unit.

For battery powered units, refer to the operating instructions.

For external power supplied units, use only the recommended or approved power supplies.

For limited power source units, this power source must comply with EN60950. Substitutions may damage the unit or cause fire or shock.

For 24 VAC units, voltage applied to the unit's power input should not exceed ±10%, or 28 VAC. Usersupplied wiring must comply with local electrical codes (Class 2 power levels). Do not ground the supply at the terminals or at the unit's power supply terminals.

If unsure of the type of power supply to use, contact your dealer or local power company.

7.Servicing - Do not attempt to service this unit yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

8.Damage requiring service - Unplug the unit from the main AC power source and refer servicing to qualified service personnel when any damage to the equipment has occurred, such as:

the power supply cord or plug is damaged;

exposure to moisture, water, and/or inclement weather (rain, snow, etc.);

liquid has been spilled in or on the equipment;

an object has fallen into the unit;

unit has been dropped or the unit cabinet is damaged;

unit exhibits a distinct change in performance;

unit does not operate normally when the user correctly follows the operating instructions.

Bosch Security Systems, Inc.

Installation Guide

F.01U.250.895 | 1.0 | 2011.08

8 en | Important Safety Instructions

AutoDome Power Supply Boxes

 

 

9.Replacement parts - Be sure the service technician uses replacement parts specified by the manufacturer, or that have the same characteristics as the original parts.

Unauthorized substitutions may cause fire, electrical shock, or other hazards.

10.Safety check - Safety checks should be performed upon completion of service or repairs to the unit to ensure proper operating condition.

11.Installation - Install in accordance with the manufacturer's instructions and in accordance with applicable local codes.

12.Attachments, changes or modifications - Only use attachments/accessories specified by the manufacturer. Any change or modification of the equipment, not expressly approved by Bosch, could void the warranty or, in the case of an authorization agreement, authority to operate the equipment.

1.3Important Notices

U.S.A. models only - Section 810 of the National Electrical Code, ANSI/NFPA No.70, provides information regarding proper grounding of the mount and supporting structure, grounding of the coax to a discharge unit, size of grounding conductors, location of discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working life, must be collected and disposed of separately from household waste material. Separate collecting systems are usually in place for disused electronic and electrical products. Please dispose of these units at an environmentally compatible recycling facility, per European Directive 2002/96/ EC

F.01U.250.895 | 1.0 | 2011.08

Installation Guide

Bosch Security Systems, Inc.

AutoDome Power Supply Boxes

Important Safety Instructions | en

9

 

 

 

Environmental statement - Bosch has a strong commitment towards the environment. This unit has been designed to respect the environment as much as possible.

Power lines: An outdoor system should not be located in the vicinity of overhead power lines, electrical lights, or power circuits, or where it may contact such power lines or circuits. When installing an outdoor system, extreme care should be taken to keep from touching power lines or circuits, as this contact may be fatal.

U.S.A. models only - refer to the National Electrical Code Article 820 regarding installation of CATV systems.

SELV - All the input/output ports are Safety Extra Low Voltage (SELV) circuits. SELV circuits should only be connected to other SELV circuits.

Because the ISDN circuits are treated like telephone-network voltage, avoid connecting the SELV circuit to the Telephone Network Voltage (TNV) circuits.

System ground/Safety ground

System (video) ground is indicated by the symbol .

Safety (power) ground is indicated by the symbol .

The system ground is only used to comply with safety standards or installation practices in certain countries. Bosch does not recommend connecting system ground to safety ground unless it is explicitly required. However, if the system ground and safety ground are connected and grounding loops are causing interference in the video signal, use an isolation transformer (available separately from Bosch).

CAUTION!

Connecting System ground to Safety ground may result in ground loops that can disrupt the CCTV system.

Bosch Security Systems, Inc.

Installation Guide

F.01U.250.895 | 1.0 | 2011.08

10 en | Important Safety Instructions

AutoDome Power Supply Boxes

 

 

1.4UL certification

Disclaimer

Underwriter Laboratories Inc. (“UL”) has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested fire, shock and/or casualty hazards as outlined in UL's Standard(s) for Safety for Closed Circuit Television Equipment, UL 2044. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product.

UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.

Disclaimer

Underwriter Laboratories Inc. (“UL”) has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested fire, shock and/or casualty hazards as outlined in UL's Standard(s) for Safety for Information Technology Equipment, UL 60950-1. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product.

UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING-RELATED FUNCTIONS OF THIS PRODUCT.

1.5Bosch notices

Video loss

Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of lost digital information, Bosch Security Systems recommends multiple, redundant recording systems, and a procedure to back up all analog and digital information.

F.01U.250.895 | 1.0 | 2011.08

Installation Guide

Bosch Security Systems, Inc.

AutoDome Power Supply Boxes

Important Safety Instructions | en 11

 

 

Copyright

This manual is the intellectual property of Bosch Security Systems and is protected by copyright. All rights reserved.

Trademarks

All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.

Note:

This manual has been compiled with great care and the information it contains has been thoroughly verified. The text was complete and correct at the time of printing. The ongoing development of the products may mean that the content of the user guide can change without notice. Bosch Security Systems accepts no liability for damage resulting directly or indirectly from faults, incompleteness or discrepancies between the user guide and the product described.

More information

For more information please contact the nearest Bosch Security Systems location or visit www.boschsecurity.com

Bosch Security Systems, Inc.

Installation Guide

F.01U.250.895 | 1.0 | 2011.08

12 en | Installing the Power Supply Box

AutoDome Power Supply Boxes

 

 

2Installing the Power Supply Box

2.1Unpacking

This equipment should be unpacked and handled with care. If an item appears to have been damaged in shipment, notify the shipper immediately.

Verify that all the parts listed in the product's Parts List below are included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representative. The original packing carton is the safest container in which to transport the unit and must be used if returning the unit for service. Save it for possible future use.

2.1.1Parts List

The following table lists the parts included with one of the following power supply boxes:

Power Supply Box

Part Number

 

 

24 VAC (no transformer) power supply,

VG4-A-PSU0

NEMA-rated with cover

 

 

 

120 VAC transformer power supply,

VG4-A-PSU1

NEMA-rated with cover

 

 

 

230 VAC transformer power supply,

VG4-A-PSU2

NEMA-rated with cover

 

 

 

2.1.2Optional Parts List

The following table lists the optional equipment for use with the power supply boxes:

Option

Part Number

 

 

Trim skirt

VGA-A-TSKIRT

 

 

Replacement power supply box cover

VG4-SBOX-COVER

 

 

Analog Multimode Fiber Optic Kit

VGA-FIBER-AN

 

 

Ethernet Media Converter Kit

VG4-SFPSCKT

 

 

Note: The fiber optic kits are mounted inside the power supply box. Refer to the individual kit for installation instructions.

F.01U.250.895 | 1.0 | 2011.08

Installation Guide

Bosch Security Systems, Inc.

Loading...
+ 28 hidden pages