AutoDome Modular Camera System
VG4-200, VG4-300, and VG4-500i Series
en User’s Manual
AutoDome, Bilinx, Bosch, the Bosch logo, DiBos, FastAddress and VIDOS are registered trademarks of Bosch Security Systems, inc.
The following trademarks are registered with the United States Patent and Trademark Office: Pentium is a registered trademark of Intel Corporation
.NET, DirectX, Internet Explorer, Microsoft, Windows, Windows 2000 and Windows XP are registered trademarks of Microsoft Corporation
Due to the nature of this material, this document refers to numerous hardware and software products by their trade names, In most, if not all cases, these designations are claimed as trademarks or registered trademarks by their respective companies in the United States of America. It is not this publisher’s intent to use any of these names generically. The reader is therefore cautioned to investigate all claimed trademark rights before using any of these names other than to refer to the product described.
AutoDome Modular Camera System |
| en |
iii |
|
|
|
Preface
This guide describes how to control a VG4-200, VG4-300, and a VG4-500i Series AutoDome using a keyboard (Bosch or Pelco® brand keyboards) or via a TCP/IP connection.
Audience
This manual is intended for operators who are familiar with CCTV terms and configurations. Appendix A, on page 69, is a "tear-out" section for quick reference of User Commands.
Document Conventions
|
|
Convention |
Meaning |
Bold |
Denotes a part, item, or assembly. |
Italic |
Denotes a reference to another paragraph, figure or table. |
Underline |
Used to emphasize a point. |
Courier |
Used to denote an item that is selected or must be typed exactly. |
Symbols
You may encounter these symbols within the document. Explanatory text accompanies each symbol, which provides additional information detailing the operation or highlighting safety information.
NOTICE! Notices inform you of essential but non-critical information. Read these i messages carefully as any directions or instructions contained therein can help you
avoid making mistakes.
|
CAUTION! Cautionary messages provide critical information that help you reduce the chance |
|
|
of losing data or damaging the system. Please heed these messages. |
|
! |
WARNING! Warnings highlight information, that if overlooked may cause damage to the |
|
system or result in personal injury. Take warnings seriously. |
||
|
Bosch Security Systems, Inc. |
VG4-200, VG4-300, VG4-500i Series User’s Manual |
F01U064036 | 1.0 | 2007.01 |
iv en | |
AutoDome Modular Camera System |
|
|
Customer Support and Service
If this unit needs service, contact the nearest Bosch Security Systems Service Center for authorization to return and shipping instructions.
Service Centers
USA
Phone: 800-366-2283 or 585-340-4162
Fax: 800-366-1329
Email: cctv.repair@us.bosch.com
Technical Support
Phone: 800-326-1450
Email: technical.support@us.bosch.com
CCTV Spare Parts
Phone: 800-894-5215 or 408-957-3065
Fax: 408-935-5938
Email: BoschCCTVparts@ca.slr.com
Canada
Phone: 514-738-2434
Fax: 514-738-8480
Europe, Middle East & Asia Pacific Region
Phone: 44 (0) 1495 274558
Fax: 44 (0) 1495 274280
Email: rmahelpdesk@solectron.com
For additional information, see www.boschsecurity.com
Related Publications
Refer to the latest Bosch Security Systems Databook for the most up-to-date datasheets. To obtain a copy of the Databook, please contact your local Bosch representative.
You can also visit the Bosch Security Systems World Wide Web site at: http://www.boschsecurity.com to view a current listings of our publications.
F01U064036 | 1.0 | 2007.01 |
VG4-200, VG4-300, VG4-500i Series User’s Manual |
Bosch Security Systems, Inc. |
AutoDome Modular Camera System |
Table of Contents | en |
v |
|
|
|
Table of Contents
1 |
Getting Started |
3 |
1.1 |
Powering On |
3 |
1.2 |
Establishing AutoDome Control |
3 |
1.2.1 |
Basic Keyboard Operation |
3 |
1.2.2 |
Keyboard Commands |
4 |
1.3 |
Setting the Camera Address |
4 |
1.3.1 |
FastAddress |
4 |
1.4 |
Setting Passwords |
5 |
1.4.1 |
Special Passwords |
5 |
2 |
On-Screen Display Menu Navigation |
7 |
2.1 |
Setup Menu |
7 |
2.2 |
Camera Setup Menu |
9 |
2.3 |
Lens Setup |
11 |
2.4 |
PTZ Setup Menu |
12 |
2.5 |
Display Setup Menu |
14 |
2.6 |
Communication Setup Menu |
15 |
2.7 |
Alarm I/O Setup |
16 |
2.8 |
Rule Setup Menu |
18 |
2.9 |
Language Menu |
20 |
2.10 |
Advanced Feature Setup Menu (available with Series 500i only) |
21 |
2.11 |
Diagnostics Menu |
22 |
3 |
Common AutoDome User Commands (unlocked) |
23 |
3.1 |
Setting AutoPan Mode |
23 |
3.2 |
Setting Preset Shots |
23 |
3.3 |
Configuring Preposition Tours |
23 |
3.4 |
Programming the Inactivity Operation |
24 |
3.5 |
Recording Tours |
24 |
4 |
Pelco® Protocol Mode |
25 |
4.1 |
Hardware Configuration |
25 |
4.2 |
Address Guidelines |
26 |
4.3 |
Pelco Keyboard Commands |
26 |
4.3.1 |
Special Preset Commands |
26 |
5 |
Pelco On-Screen Menus |
27 |
5.1 |
Setup Menu |
27 |
5.1.1 |
Command Lock (locked) |
28 |
5.1.2 |
Bosch Menu (locked) |
28 |
5.1.3 |
PTZ Setup (unlocked) |
30 |
5.1.4 |
Other Menus |
31 |
Bosch Security Systems, Inc. |
VG4-200, VG4-300, VG4-500i Series User’s Manual |
F01U064036 | 1.0 | 2007.01 |
vi en | Table of Contents AutoDome Modular Camera System
6 |
Keyboard Commands by Number |
33 |
|
|
|
7 |
Advanced Features |
35 |
7.1 |
Alarm Rules |
35 |
7.2 |
AutoTrack |
37 |
7.3 |
Privacy Masking |
37 |
7.4 |
Virtual Masking |
37 |
7.5 |
Motion Detection with Region of Interest |
37 |
7.6 |
Pre-position Tour |
38 |
|
|
|
8 |
Configuring and Using the IP AutoDome |
39 |
8.1 |
Overview of Features |
39 |
8.2 |
System Requirements |
40 |
8.3 |
Connecting the IP AutoDome to the PC |
40 |
8.4 |
Configuring the IP Camera |
41 |
8.4.1 |
Installing the Required Software |
42 |
8.4.2 |
Changing the Network Settings |
42 |
8.5 |
Viewing Live Images and Controlling the AutoDome PTZ |
43 |
8.5.1 |
Establishing a Connection |
43 |
8.5.2 |
Configuring Data Streams |
44 |
8.5.3 |
Controlling Camera Operations |
44 |
8.5.4 |
Entering a Keyboard Control Command |
46 |
|
|
|
9 |
Troubleshooting Guide |
49 |
|
|
|
10 |
Glossary of CCTV Terms |
53 |
|
|
|
|
Index |
63 |
|
|
|
A |
User Commands by Number |
69 |
F01U064036 | 1.0 | 2007.01 |
VG4-200, VG4-300, VG4-500i Series User’s Manual |
Bosch Security Systems, Inc. |
AutoDome Modular Camera System Getting Started | en 3
1 |
Getting Started |
|
Install and wire the AutoDome according to the Bosch AutoDome Modular Camera System |
|
Installation Manual. A typical system includes a keyboard, matrix switcher, monitor, and appro- |
|
priate wiring connections. Please refer to the individual product manuals for complete instal- |
|
lation and setup instructions for each of the system components. |
1.1 |
Powering On |
|
When you turn the AutoDome power on there is a ten (10) second pause before the dome |
|
starts its homing phase. During the homing phase the camera pans left and right and tilts up |
|
and down. It also adjusts the lens focus. The entire homing phase lasts approximately 40 sec- |
|
onds and ends with a splash screen. |
1.2 |
Establishing AutoDome Control |
|
The most common ways to interface with the AutoDome are: |
–Using a keyboard and on-screen display (OSD) menus. This method is the most common and is covered in this manual.
–Using the AutoDome Configuration Tool software running on a PC with Bilinx or the RS232/485 communication protocol. Refer to the CTFID User Guide for instructions.
–Using a PC-based graphical user interface (GUI) such as the Bosch DiBos 8 software. Refer to the DiBos 8 User Guide for instructions.
–Using the Bosch IP Web interface included with the IP Communications Module.
1.2.1Basic Keyboard Operation
The following tables summarize the basic operations for a standard keyboard and the functions available to control an AutoDome camera.
Typical Keyboard |
Usage |
|
|
Features |
|
|
|
|
|
|
|
Function Keys |
Selects a specific control setting. |
|
|
|
|
|
|
Number Keys |
Inputs a number from 0 to 9. |
|
|
|
|
|
|
Camera Key |
Selects a camera number. |
|
|
|
|
|
|
Enter Key |
Inputs a selection. |
|
|
|
|
|
|
Focus Key |
Sets the lens focus or makes a menu selection in OSD mode. |
|
|
|
|
|
|
Iris Key |
Sets the lens iris setting or makes a menu selection in OSD mode. |
|
|
|
|
|
|
Key LEDs |
Indicates an active key. |
|
|
|
|
|
|
LCD |
Displays the current status. |
|
|
|
|
|
|
Joystick |
Controls a pan/tilt/zoom (PTZ) AutoDome camera. |
|
|
|
|
|
|
Table 1.1 Typical Keyboard Functions |
|
||
Dome Operation |
|
How to control |
|
|
|
||
|
|
|
|
To Pan Side to Side |
Move the joystick left or right. |
|
|
|
|
|
|
To Tilt Up and Down |
Move the joystick forward and back. |
|
|
|
|
|
|
To Zoom In |
|
Twist the joystick clockwise. |
|
|
|
|
|
To Zoom Out |
|
Twist the joystick counterclockwise. |
|
|
|
|
|
Table 1.2 Typical Keyboard Controls for an AutoDome Camera
Bosch Security Systems, Inc. |
VG4-200, VG4-300, VG4-500i Series User’s Manual |
F01U064036 | 1.0 | 2007.01 |
4 |
en | Getting Started |
AutoDome Modular Camera System |
|
|
|
1.2.2Keyboard Commands
Keyboard control commands are composed of a sequence of three (3) inputs with the following convention: 1) a Function key + 2) a Command number key(s) + 3) the Enter key.
– Depending on the type of keyboard, the control function keys are labeled:
ON or AUX ON OFF or AUX OFF SET or SET SHOT
SHOT or SHOW SHOT
i |
NOTICE! The convention used for control key commands in this manual is ON, OFF, SET, and |
|
SHOT. Refer to your keyboard manual for the key naming conventions. |
||
|
–Command numbers range from 1 to 999. See Chapter 6: Keyboard Commands by Number for a complete list of keyboard commands.
–The Enter key can also be labeled with the symbol.
|
For example, the keyboard command to make the AutoDome pan 360º continuously is: |
|
|
ON-1-ENTER |
|
|
Press the ON key, then press the number 1 key, and then press ENTER. |
|
1.3 |
Setting the Camera Address |
|
|
Once the AutoDome power is turned on and homing is complete, you must set the camera |
|
|
address. You may also want to assign a password and customize some of the AutoDome |
|
|
default settings. |
|
|
|
|
i |
NOTICE! You do not need to set a camera address if using Bilinx or Ethernet communication. |
|
See the AutoDome Installation Manual to configure an AutoDome for Bilinx or Ethernet |
|
|
operation. |
|
|
|
|
|
1.3.1 |
FastAddress |
|
|
FastAddress is an AutoDome feature that allows you to set or change a camera address using |
|
|
the keyboard and on-screen menus. |
|
|
There are three (3) FastAddress commands: |
|
|
– ON-999-ENTER: Displays and programs all cameras without an address in the system. |
|
|
|
|
i |
NOTICE! If a keyboard is set to a camera number that already has an address, that camera also |
|
responds to this command. |
|
|
|
|
–ON-998-ENTER: Displays and programs all cameras with or without an address in the system.
–ON-997-ENTER: Displays the current address status of all cameras in the system simultaneously.
To set an address to a camera without an address:
1.Select the camera number you want to FastAddress. The system displays the camera number on the keyboard and the image on the corresponding monitor.
2.Press #-ENTER (where # is the camera number without an address).
3.Press ON-999-ENTER to invoke an on-screen display of cameras on the system without an address.
F01U064036 | 1.0 | 2007.01 |
VG4-200, VG4-300, VG4-500i Series User’s Manual |
Bosch Security Systems, Inc. |
AutoDome Modular Camera System |
Getting Started | en |
5 |
|
|
|
4.Follow the on-screen instructions. You receive an on-screen confirmation when the
FastAddress is complete.
To change or clear an address to a camera with an address:
1.Select the camera number you want to FastAddress. The system displays the camera number on the keyboard and the image on the corresponding monitor.
2.Press #-ENTER (where # is the camera number with an address).
3.Press ON-998-ENTER to invoke an on-screen display of all cameras on the system, with or without an address.
4.Follow the on screen instructions. You receive an on-screen confirmation when the
FastAddress is complete.
|
i |
NOTICE! FastAddress is stored in nonvolatile memory and does not change if the power is |
|
turned off or if the default settings are restored. |
|
|
|
|
|
|
|
1.4 |
|
Setting Passwords |
Passwords are used to control access to locked command menus. Unlocked commands are available to all users. Passwords are four (4) digits in length.
1.4.1Special Passwords
Password |
Security Level |
0000 (default) Enables security and requires a user to enter the unlock command OFF-90-ENTER before invoking a locked command.
9999 |
Disables all security and allows all users to access locked commands. |
To set or change a password (locked command):
1.Press OFF-90-ENTER to turn off the command lock.
2.Press SET-802-ENTER to access the password menu.
3.Tilt the joystick up or down to choose a number. Tilt the joystick right to move to the next number position.
4.Follow the on-screen instructions and save the password. You receive an on-screen confirmation.
Bosch Security Systems, Inc. |
VG4-200, VG4-300, VG4-500i Series User’s Manual |
F01U064036 | 1.0 | 2007.01 |
6 |
en | Getting Started |
AutoDome Modular Camera System |
|
|
|
F01U064036 | 1.0 | 2007.01 |
VG4-200, VG4-300, VG4-500i Series User’s Manual |
Bosch Security Systems, Inc. |
AutoDome Modular Camera System On-Screen Display Menu Navigation | en 7
2 |
|
On-Screen Display Menu Navigation |
|
|
The AutoDome is programmed through the on-screen display (OSD) menus. To access the |
|
|
OSD menus, you must open the main Setup Menu. |
|
|
Menus items marked with an * are default settings, unless otherwise noted. |
|
|
|
|
i |
NOTICE! After a period of 4.5 minutes of inactivity, a menu times-out and exits without |
|
warning. Some unsaved settings in the current menu can be lost. |
|
|
|
|
|
|
|
2.1 |
|
Setup Menu |
|
|
The main Setup Menu provides access to all programmable AutoDome settings. It is a locked |
|
|
menu that requires the user to turn off the command lock. |
To open the main Setup Menu (locked command):
1.Press OFF-90-ENTER to turn off the command lock.
2.Press ON-46-ENTER to access the Main Menu.
3.Use the joystick to highlight a menu item.
4.Press Focus/Iris to open a menu.
5.Follow the on-screen instructions.
NOTICE! The AutoDome displays only those menus applicable to the AutoDome Series
i configuration. Use the joystick to navigate through the menu and the Focus/Iris keys to make a selection.
Setup Menu
Exit...
Camera Setup
Lens Setup
PTZ Setup
Display Setup
Communication Setup
Alarm Setup
Language
Advanced
Diagnostics
Focus / Iris: Select
Bosch Security Systems, Inc. |
VG4-200, VG4-300, VG4-500i Series User’s Manual |
F01U064036 | 1.1 | 2007.01 |
8 en | On-Screen Display Menu Navigation AutoDome Modular Camera System
Setup Menu Choices:
Menu |
Description |
|
|
Exit |
Exits the menu. |
|
|
Camera Setup |
Accesses adjustable camera settings such as: white balance, gain, sharpness, sync, |
|
line lock, backlight, shutter, and night mode. |
|
|
Lens Setup |
Accesses adjustable lens settings such as: focus, iris, zoom speed, and digital |
|
zoom. |
|
|
PTZ Setup |
Accesses adjustable pan/tilt/zoom (PTZ) settings such as: Autopan, tours, PTZ |
|
speed, inactivity period, AutoPivot, and tilt limits. |
|
|
Display Setup |
Accesses adjustable display settings such as: OSD, sector blanking, and privacy |
|
masking. |
|
|
Communication Setup |
Accesses communication settings such as: AutoBaud and Bilinx. |
|
|
Alarm Setup |
Accesses the alarm settings such as: inputs, outputs, and rules (not available with |
|
200 Series models). |
|
|
Language |
Displays the language. |
|
|
Advanced |
Accesses the advanced features menu including AutoTrack Sensitivity, Camera |
|
Height, and Virtual Masking (only available on 500i Series models). |
|
|
Diagnostics |
Displays the status of diagnostic events. |
|
|
NOTICE! To select the Exit Menu item from anywhere in the current menu, use the Zoom i command.
F01U064036 | 1.1 | 2007.01 |
VG4-200, VG4-300, VG4-500i Series User’s Manual |
Bosch Security Systems, Inc. |
AutoDome Modular Camera System On-Screen Display Menu Navigation | en 9
2.2 Camera Setup Menu
The Camera Setup Menu provides access to camera settings that can be changed or customized. Menu items with an * are the default settings.
|
Camera Setup |
|
|
|
|
|
Exit... |
|
|
|
|
|
|
* White Bal: |
|
|
EXT ATW |
|
|
|
* Gain Control: |
|
|
AUTO |
|
|
|
* Max. Gain Level: |
|
|
6 |
|
|
|
* Sharpness |
|
|
6 |
|
|
|
* Synch Mode: |
|
|
Internal |
|
|
|
* Line Lock Delay: |
|
|
0 |
|
|
|
* Backlight Comp: |
|
|
OFF |
|
|
|
* Shutter Mode: |
|
Auto SensUP |
|
|
|
|
* Shutter: |
|
|
1/60 |
|
|
|
* Auto SensUP Max: |
|
|
15x |
|
|
|
* Night Mode: |
|
|
AUTO |
|
|
|
* Night Mode Color: |
|
|
OFF |
|
|
|
* Night Mode Threshold: |
30 |
|
|
|
||
* Pre-Comp |
|
|
1 |
|
|
|
Restore Defaults... |
|
|
|
|
|
|
* = Factory Setting |
|
|
|
|
||
Focus / Iris: Select |
|
|
|
|
||
|
|
|
|
|
|
|
Camera Setup Menu Choices: |
|
|
|
|
||
|
|
|
|
|
|
|
Menu |
|
Description |
|
|
Sub-menu / Description |
Default Set- |
|
|
|
|
|
|
ting |
|
|
|
|
|
|
|
Exit |
|
Exits the menu. |
|
|
|
|
|
|
|
|
|
||
White Balance |
|
Maintains proper color repro- |
Extended ATW: Adjusts camera color |
Extended |
||
|
|
duction as the color tempera- |
using extended range. |
ATW |
||
|
|
ture of a scene changes. For |
ATW: Adjusts camera color constantly. |
|
||
|
|
example, from daylight to fluo- |
Indoor W.B.: Optimizes camera color for |
|
||
|
|
rescent lighting. |
|
|
typical indoor conditions. |
|
|
|
|
|
|
Outdoor W.B.: Optimizes camera color |
|
|
|
|
|
|
for typical outdoor conditions. |
|
|
|
|
|
|
AWB Hold: Sets the camera's color set- |
|
|
|
|
|
|
tings for the current scene. |
|
|
|
|
|
|
||
Gain Control |
|
Electronically brightens darker |
Auto or OFF |
AUTO |
||
|
|
scenes which may cause grain- |
|
|
||
|
|
iness in low light scenes. |
|
|
||
|
|
|
|
|
||
Max. Gain Level |
|
Adjusts the maximum gain |
Sliding scale: – (1 to 6) + |
6 |
||
|
|
level that the gain control |
|
|
||
|
|
adjusts to when set to AUTO. |
|
|
||
|
|
|
|
|
||
Sharpness |
|
Adjusts the sharpness level of |
Sliding scale: – (1 to 16) + |
6 |
||
|
|
the picture. |
|
|
|
|
|
|
|
|
|
||
Synch Mode |
|
Sets the type of synchroniza- |
INTERNAL: Synchronizes camera to an |
INTERNAL |
||
|
|
tion mode for the camera. |
internal crystal. This choice is recom- |
|
||
|
|
|
|
|
mended if there is noise on the power |
|
|
|
|
|
|
line. |
|
|
|
|
|
|
LINE LOCK: Synchronizes camera to AC |
|
|
|
|
|
|
power. This choice eliminates picture roll |
|
|
|
|
|
|
in multi-camera systems. |
|
|
|
|
|
|
||
Line Lock Delay |
|
Optimizes the LINE LOCK |
Sliding scale: – (0º to 359º) + |
0º |
||
|
|
mode to eliminate picture roll |
|
|
||
|
|
in multiphase power applica- |
|
|
||
|
|
tions. |
|
|
|
|
|
|
|
|
|
|
|
Bosch Security Systems, Inc. |
VG4-200, VG4-300, VG4-500i Series User’s Manual |
F01U064036 | 1.1 | 2007.01 |
10 en | On-Screen Display Menu Navigation |
|
AutoDome Modular Camera System |
||
|
|
|
|
|
|
|
|
|
|
|
Menu |
Description |
Sub-menu / Description |
Default Set- |
|
|
|
|
ting |
|
|
|
|
|
|
Backlight Comp |
Improves image quality when |
ON or OFF |
OFF |
|
|
the background illumination |
|
|
|
|
level is high. |
|
|
|
|
|
|
|
|
Shutter Mode: |
Turns Auto SensUP on or off. |
Auto SensUP or OFF |
Auto SensUP |
|
|
|
|
|
|
Shutter |
Adjusts the electronic shutter |
Sliding scale: – (60 at extreme left to |
1/60 sec. |
|
|
speed (AES). |
1/10000) + |
(NTSC) or |
|
|
|
|
1/50 sec. |
|
|
|
|
(PAL) |
|
|
|
|
|
|
Auto SensUP Max. |
Sets the limit for sensitivity |
15x, 7.5x, 4x, or 2x |
15x |
|
|
when the shutter speed is set |
|
|
|
|
to Auto SensUP. |
|
|
|
|
|
|
|
|
Night Mode |
Selects night mode (B/W) to |
ON, OFF, or AUTO |
AUTO |
|
(Day/Night models |
enhance lighting in low light |
|
|
|
only) |
scenes. |
|
|
|
|
|
|
|
|
Night Mode Color |
Determines if color processing |
ON or OFF |
OFF |
|
(Day/Night models |
remains in effect while in night |
|
|
|
only) |
mode. |
|
|
|
|
|
|
|
|
Night Mode Thresh- |
Adjusts the level of light at |
Sliding scale: – (10 to 55) + |
30 |
|
old |
which the camera automati- |
(in increments of 5) |
|
|
(Day/Night models |
cally switches to night mode |
|
|
|
only) |
(B/W) operation. |
|
|
|
|
|
|
|
|
Pre-Comp |
Amplifies the video gain to |
Sliding scale: – (1 to 10) + |
1 |
|
(not applicable with |
compensate for long distance |
|
|
|
IP AutoDome mod- |
cable runs. |
|
|
|
els) |
|
|
|
|
|
|
|
|
|
Restore Defaults |
Restores all default settings |
|
|
|
|
for this menu only. |
|
|
|
|
|
|
|
F01U064036 | 1.1 | 2007.01 |
VG4-200, VG4-300, VG4-500i Series User’s Manual |
Bosch Security Systems, Inc. |
AutoDome Modular Camera System On-Screen Display Menu Navigation | en 11
2.3 Lens Setup
The Lens Setup Menu provides access to lens settings that can be changed or customized. Menu items with an * are the default settings.
|
Lens Setup |
|
|
|
|
||
|
Exit... |
|
|
|
|
|
|
* |
Auto Focus: |
|
SPOT |
|
|
|
|
* |
Auto Iris: |
CONSTANT |
|
|
|
||
* |
Auto Iris Level: |
|
8 |
|
|
|
|
* |
Focus Speed: |
|
2 |
|
|
|
|
* |
Iris Speed: |
|
5 |
|
|
|
|
* |
Max Zoom Speed: |
FAST |
|
|
|
||
* |
Digital Zoom: |
|
ON |
|
|
|
|
|
Restore Defaults |
|
|
|
|
||
|
* = Factory Setting |
|
|
|
|
||
|
Focus / Iris: Select |
|
|
|
|
||
|
|
|
|
|
|||
Lens Setup Menu Choices: |
|
|
|||||
|
|
|
|
|
|
|
|
Menu |
|
Description |
|
|
Sub-menu / Description |
Default |
|
|
|
|
|
|
|
|
Setting |
|
|
|
|
|
|||
Exit |
|
Saves and exits the menu. |
|
|
|||
|
|
|
|
|
|||
Auto Focus |
|
Automatically focuses on |
CONSTANT: Auto Focus is always active, even |
SPOT |
|||
|
|
|
the subject in the center of |
while the camera is moving. |
|
||
|
|
|
the screen. |
|
|
MANUAL: Auto Focus is inactive; manual focus |
|
|
|
|
|
|
|
must be used. |
|
|
|
|
|
|
|
SPOT: The camera activates Auto Focus after the |
|
|
|
|
|
|
|
camera stops movement. Once focused, Auto |
|
|
|
|
|
|
|
Focus is inactive until the camera moves again. |
|
|
|
|
|
|
|||
Auto Iris |
|
Automatically adjusts to |
MANUAL: Iris must be adjusted manually. |
CONSTANT |
|||
|
|
|
varying light conditions. |
CONSTANT: Auto Iris is constantly active. |
|
||
|
|
|
|
|
|||
Auto Iris Level |
|
Reduces the camera's iris |
Sliding scale: – (1 to 15) + |
8 |
|||
|
|
|
level for proper exposure. |
|
|
||
|
|
|
|
|
|||
Focus Speed |
|
Adjusts the manual focus |
Sliding scale: – (1 to 8) + |
2 |
|||
|
|
|
speed. |
|
|
|
|
|
|
|
|
|
|||
Iris Speed |
|
Adjusts the manual iris |
Sliding scale: – (1 to 10) + |
5 |
|||
|
|
|
speed. |
|
|
|
|
|
|
|
|
|
|||
Max. Zoom |
|
Adjusts the manual zoom |
SLOW, MEDIUM, or FAST |
FAST |
|||
Speed |
|
speed. |
|
|
|
|
|
|
|
|
|
|
|||
Digital Zoom |
|
Enables digital zoom. |
OFF or ON |
ON |
|||
(not available |
|
|
|
|
|
|
|
with 200 Series |
|
|
|
|
|
|
|
models) |
|
|
|
|
|
|
|
|
|
|
|
|
|||
Restore |
|
Restores all default settings |
|
|
|||
Defaults |
|
for this menu. |
|
|
|||
|
|
|
|
|
|
|
|
Bosch Security Systems, Inc. |
VG4-200, VG4-300, VG4-500i Series User’s Manual |
F01U064036 | 1.1 | 2007.01 |
12 en | On-Screen Display Menu Navigation AutoDome Modular Camera System
2.4 PTZ Setup Menu
The PTZ Menu provides access to pan/tilt/zoom settings that can be changed or customized. Menu items with an * are the default settings.
|
PTZ Setup |
|
|
|
|
|
|
Exit... |
|
|
|
|
|
* |
Autopan: |
30 deg/sec |
|
|
|
|
* |
Tour 1 Period: |
|
5 sec |
|
|
|
* |
Tour 2 Period: |
|
5 sec |
|
|
|
* |
PTZ Fixed Speed: |
|
4 |
|
|
|
* |
Inactivity: |
|
OFF |
|
|
|
* |
Inact. Period |
|
2 min |
|
|
|
* |
AutoPivot: |
|
ON |
|
|
|
* |
AutoDome Orientation |
NORMAL |
|
|
|
|
* Freeze Frame on Prepostion |
ON |
|
|
|
||
|
Tilt Up Limit... |
|
|
|
|
|
|
Restore Defaults |
|
|
|
|
|
|
* = Factory Setting |
|
|
|
|
|
|
Focus / Iris: Select |
|
|
|
|
|
PTZ Menu Choices: |
|
|
|
|
||
|
|
|
|
|
|
|
Menu |
Description |
|
|
Sub-menu / Description |
Default |
|
|
|
|
|
|
|
Setting |
|
|
|
|
|||
Exit |
Exits the menu. |
|
|
|||
|
|
|
|
|||
AutoPan |
Adjusts speed of camera during |
Sliding scale: – (1º/sec. to 60º/sec.) + |
30º/sec. |
|||
|
|
AutoPan and AutoScan. |
|
|
||
|
|
|
|
|||
Tour 1 Period |
Changes dwell time between |
Sliding scale: – (3 sec. to 10 min.) + |
5 sec. |
|||
|
|
presets during the tour. |
|
|
||
|
|
|
|
|||
Tour 2 Period |
Changes dwell time between |
Sliding scale: – (3 sec. to 10 min.) + |
5 sec. |
|||
(not available with |
presets during the tour. |
|
|
|||
200 Series models) |
|
|
|
|
|
|
|
|
|
|
|||
PTZ Fixed Speed |
Sets pan and tilt speed when |
Sliding scale: – (1 to 15) + |
4 |
|||
|
|
controlled by a fixed speed |
|
|
||
|
|
controller. |
|
|
|
|
|
|
|
|
|||
Inactivity |
Selects the mode that an |
Scene 1: Returns to Preset 1. |
OFF |
|||
|
|
AutoDome reverts to after the |
Prev Aux: Returns to previous activity, |
|
||
|
|
period of inactivity set in the |
such as Aux commands 1, 2, 7, 8, 50, or |
|
||
|
|
inactivity period. |
52. |
|
||
|
|
|
|
|
OFF: Remains on the current scene indefi- |
|
|
|
|
|
|
nitely. |
|
|
|
|
|
|||
Inactivity Period |
Sets the time period of inactiv- |
Sliding scale: – (3 sec. to 10 min.) + |
2 min. |
|||
|
|
ity before the above action |
|
|
||
|
|
occurs. |
|
|
|
|
|
|
|
|
|||
AutoPivot |
Automatically rotates the cam- |
OFF or ON |
ON |
|||
|
|
era 180º when following a sub- |
|
|
||
|
|
ject traveling directly beneath |
|
|
||
|
|
the camera. |
|
|
|
|
|
|
|
|
|||
AutoDome |
Automatically rotates the video |
INVERTED or NORMAL |
NORMAL |
|||
Orientation |
180º. |
|
|
|
|
|
(not available with |
|
|
|
|
|
|
18x color camera) |
|
|
|
|
|
|
|
|
|
|
|
|
|
F01U064036 | 1.1 | 2007.01 |
VG4-200, VG4-300, VG4-500i Series User’s Manual |
Bosch Security Systems, Inc. |
AutoDome Modular Camera System |
|
On-Screen Display Menu Navigation | en 13 |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
Menu |
|
Description |
Sub-menu / Description |
Default |
|
|
|
|
|
Setting |
|
|
|
|
|
|
|
Freeze Frame On |
Holds a preposition video |
OFF or ON |
ON |
|
|
Preposition |
frame while moving to another |
|
|
|
|
(not available with |
preposition. |
|
|
|
|
18x color camera) |
|
|
|
|
|
|
|
|
|
|
|
Tilt Up Limit... |
Sets the upper tilt limit of the |
Use joystick to move to a scene |
|
|
|
|
|
camera. |
|
|
|
|
|
|
|
|
|
Restore Defaults |
Restores the default setting for |
|
|
|
|
|
|
this menu only. |
|
|
|
|
|
|
|
|
Bosch Security Systems, Inc. |
VG4-200, VG4-300, VG4-500i Series User’s Manual |
F01U064036 | 1.1 | 2007.01 |
14 en | On-Screen Display Menu Navigation AutoDome Modular Camera System
2.5 |
Display Setup Menu |
|
|
|||||
|
Provides access to display settings that can be changed or customized. Menu items with an * |
|||||||
|
are the default settings. |
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
Display Setup |
|
|
|
|
|
|
Exit... |
|
|
|
|
|
|
|
* |
Title OSD: |
|
MOMENTARY |
|
|
|
|
|
* |
Camera OSD: |
ON |
|
|
|
||
|
|
Display Adjust: |
|
|
|
|
||
|
|
Sector Blanking... |
|
|
|
|
||
|
|
Privacy Masking... |
|
|
|
|
||
|
|
Restore Defaults |
|
|
|
|
||
|
|
|
* = Factory Setting |
|
|
|
|
|
|
|
|
Focus / Iris: Select |
|
|
|
|
|
|
|
|
|
|
|
|||
|
Display Setup Menu Choices: |
|
|
|||||
|
|
|
|
|
|
|
|
|
|
Menu |
|
Description |
|
|
Sub-menu / Description |
Default |
|
|
|
|
|
|
|
|
|
Setting |
|
|
|
|
|
|
|||
|
Exit |
|
Saves and exits the menu. |
|
|
|||
|
|
|
|
|
|
|||
|
Title OSD |
|
Controls how the OSD displays |
OFF: Titles are hidden. |
MOMENTARY |
|||
|
|
|
|
sector or shot titles. |
ON: Titles are displayed continuously. |
|
||
|
|
|
|
|
|
|
MOMENTARY: Titles are displayed for a few |
|
|
|
|
|
|
|
|
seconds then disappear from the screen. |
|
|
|
|
|
|
|
|||
|
Camera |
|
Controls how the OSD displays |
OFF or ON |
ON |
|||
|
OSD |
|
camera response information, |
|
|
|||
|
|
|
|
such as Digital Zoom, Iris open |
|
|
||
|
|
|
|
/close, and Focus near/far. |
|
|
||
|
|
|
|
|
|
|||
|
Display |
|
Adjusts the text brightness and |
Exit: Exits the menu. |
|
|||
|
Adjust |
|
vertical position of the on- |
Up: Moves screen title up. |
|
|||
|
|
|
|
screen title. |
|
|
Down: Moves screen title down. |
|
|
|
|
|
|
|
|
Brighter: Brightens the intensity of the on- |
|
|
|
|
|
|
|
|
screen text. |
|
|
|
|
|
|
|
|
Darker: Darkens the intensity of the on-screen |
|
|
|
|
|
|
|
|
text. |
|
|
|
|
|
|
|
|||
|
Sector |
|
Allows video blanking of |
Exit: Exits the menu. |
|
|||
|
Blanking |
|
selected sectors. Available sec- |
Sector (1-16): Press Focus/Iris to blank or clear |
|
|||
|
(not avail- |
|
tors are 1 through 16. Follow |
a sector. |
|
|||
|
able with |
|
the on-screen instructions. |
|
|
|||
|
200 Series |
|
|
|
|
|
|
|
|
models) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
Privacy |
|
Allows masking of sensitive |
Exit: Saves and exits menu. |
|
|||
|
Masking |
|
areas. Up to 24 privacy masks |
Mask: 1 to 24 masking areas. Follow the on- |
|
|||
|
(not avail- |
|
are available, with a maximum |
screen instructions to set a mask. See |
|
|||
|
able with |
|
limit of eight (8) to a scene. |
Section 7.3: Privacy Masking on page 37. |
|
|||
|
200 Series |
|
|
|
|
Restore Defaults: Restores the default settings |
|
|
|
models) |
|
|
|
|
for this menu only. |
|
|
|
|
|
|
|
|
|||
|
Restore |
|
Restores the default setting for |
|
|
|||
|
Defaults |
|
this menu only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
F01U064036 | 1.1 | 2007.01 |
VG4-200, VG4-300, VG4-500i Series User’s Manual |
Bosch Security Systems, Inc. |
AutoDome Modular Camera System On-Screen Display Menu Navigation | en 15
2.6 Communication Setup Menu
The Communication Setup Menu provides access to baud rate and Bilinx control settings. Menu items with an * are the default settings.
|
Communication Setup |
|
|
Exit... |
|
* |
AutoBaud: |
ON |
* |
Baud Rate |
9600 |
*Bilinx: ON Restore Defaults...
* = Factory Setting
Focus / Iris: Select
Communication Setup Menu Choices:
Menu |
Description |
Sub-menu / Description |
Default |
|
|
|
Setting |
|
|
|
|
Exit |
Saves and exits the menu. |
|
|
|
|
|
|
AutoBaud |
Turns AutoBaud detection on. |
Toggles ON or OFF. |
ON |
|
|
ON automatically accepts baud rates |
|
|
|
from 2400 to 57600. |
|
|
|
(Note: If stepping from 2400 to 57600, |
|
|
|
you must first set the controller to 19200 |
|
|
|
for AutoBaud to detect the higher baud |
|
|
|
rate.) |
|
|
|
|
|
Baud Rate |
Manually sets the baud rate when Auto- |
Choices are 2400, 4800, 9600, 19200, |
9600 |
|
Baud is set to OFF. |
38400, and 57600. Then follow the OSD |
|
|
|
to confirm the selection. |
|
|
|
|
|
Bilinx |
Turns on Bilinx control communication, |
Toggles ON or OFF. |
ON |
|
(Only available when not connected to a |
|
|
|
Bilinx data interface unit). |
|
|
|
|
|
|
NOTICE! Bilinx protocol is not available on IP cameras.
i
Bosch Security Systems, Inc. |
VG4-200, VG4-300, VG4-500i Series User’s Manual |
F01U064036 | 1.1 | 2007.01 |
16 en | On-Screen Display Menu Navigation AutoDome Modular Camera System
2.7 |
Alarm I/O Setup |
|
|
|
|
|
|
|
|
|
||
|
The Alarm Setup Menu provides access to the Alarm I/O Setup Menu to establish the alarm |
|||||||||||
|
inputs and outputs and to configure alarm rules. |
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Alarm I/O Setup |
|
Inputs Setup |
|
|
|
|
|
|
|||
|
Exit... |
|
|
Exit... |
|
|
|
|
|
|
|
|
|
Inputs Setup... |
|
|
1. Alarm Input 1 |
N.C.S. |
|
|
|
|
|
||
|
Outputs Setup... |
|
|
2. Alarm Input 2 |
N.O.S. |
|
|
1-7 |
|
|
||
|
Rule Setup... |
|
|
3. Alarm Input 3 |
N.O. |
|
|
|
|
|||
|
|
|
|
|
Physical |
|
|
|||||
|
Restore Defaults... |
|
4. Alarm Input 4 |
N.C. |
|
|
|
|
||||
|
|
|
|
|
5. Alarm Input 5 |
N.O. |
|
|
Inputs |
|
|
|
|
|
|
|
|
6. Alarm Input 6 |
N.C. |
|
|
|
|
|
|
|
|
|
|
|
7. Alarm Input 7 |
N.O. |
|
|
|
|
|
|
|
|
|
|
|
8. NONE |
|
|
|
|
|
|
|
|
|
|
|
|
9. NONE |
|
|
|
|
8-12 |
|
|
|
|
|
|
|
10. NONE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Command |
|
|
|
|
|
|
|
|
11. NONE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Inputs |
|
|
|
|
|
|
|
|
12. NONE |
|
|
|
|
|
|
|
|
|
|
|
|
Focus / Iris: Select Type |
|
|
|
|
|
||
|
Focus / Iris: Select |
|
Right / Left: Select Mode |
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Alarm Setup Menu Choices: |
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|||||
|
Menu |
|
Description |
|
|
Sub-menu / Description |
Default |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
Setting |
|
|
|
|
|
|
|
|
|
|
|
||
|
Exit |
|
Saves and exits the menu. |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|||
|
Inputs Setup |
Defines physical inputs or events and |
|
|
|
|
|
|
|
|||
|
|
|
commands that can be used in a rule. |
|
|
|
|
|
|
|
||
|
|
|
There are twelve (12) alarm inputs |
|
|
|
|
|
|
|
||
|
|
|
available. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
Inputs 1-7 |
|
Defines the type of physical input. |
N.O.: Normally open dry contact. |
N.O. |
|||||||
|
|
|
|
|
|
N.C.: Normally closed dry contact. |
|
|||||
|
|
|
|
|
|
N.C.S.: Normally closed supervised contact. |
|
|||||
|
|
|
|
|
|
N.O.S.: Normally open supervised contact. |
|
|||||
|
|
|
|
|
||||||||
|
Inputs 8-12 |
Defines input commands that can be |
NONE: No command defined. |
NONE |
||||||||
|
|
|
used in a rule. Command inputs can |
Aux On: Programs a standard or custom key- |
|
|||||||
|
|
|
also be customized by using non- |
board ON (1-99) command. |
|
|||||||
|
|
|
assigned keyboard command num- |
Aux Off: Programs a standard or custom |
|
|||||||
|
|
|
bers. |
|
|
keyboard OFF (1-99) command. |
|
|||||
|
|
|
|
|
|
Shot: Programs a Preset shot or scene from |
|
|||||
|
|
|
|
|
|
1-99. (200 Series 1-64). |
|
|
|
|||
|
|
|
|
|
|
AutoTrack: Triggers an alarm when set to |
|
|||||
|
|
|
|
|
|
ON. (Available with 500i Series only). |
|
|||||
|
|
|
|
|
|
Motion Detection: Triggers an alarm when |
|
|||||
|
|
|
|
|
|
set to ON. (Available with 500i Series only). |
|
|||||
|
|
|
|
|
||||||||
|
|
|||||||||||
i |
NOTICE! Alarm inputs 1 and 2 provide tamper detection, if programmed as supervised, for |
|||||||||||
breaks or shorts in an alarm circuit. See the AutoDome Modular Camera System Installation |
||||||||||||
Manual for wiring instructions. |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
F01U064036 | 1.1 | 2007.01 |
VG4-200, VG4-300, VG4-500i Series User’s Manual |
Bosch Security Systems, Inc. |
AutoDome Modular Camera System On-Screen Display Menu Navigation | en 17
Outputs Setup Menu
|
Outputs Setup... |
|
|
|
|
|
|
Exit... |
|
|
|
|
|
|
|
1. |
Alarm Output 1 |
N.O. |
|
1-4 |
|
|
|
2. |
Alarm Output 2 |
N.O. |
|
Physical |
|
|
|
|
|
|
|
|
|
|
|
3. |
Alarm Output 3 |
N.O. |
|
Outputs |
|
|
|
4. |
Alarm Relay |
N.O. |
|
|
|
|
|
5. |
NONE |
|
|
|
|
|
|
6. |
Aux On |
1 |
5-12 |
|
|
|
|
7. |
Aux Off |
8 |
|
|
|
||
|
Command |
|
|
|
|||
8. |
Shot |
99 |
|
|
|
|
|
|
Outputs |
|
|
|
|||
9. |
OSD |
|
|
|
|
|
|
10. Transmit |
|
|
|
|
|
|
|
11. NONE |
|
|
|
|
|
|
|
12. NONE |
|
|
|
|
|
|
|
|
Focus / Iris: Select Type |
|
|
|
|
|
|
|
Right / Left: Select Mode |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Outputs Setup Menu |
|
|
|
|
|
||
Menu |
Description |
|
|
|
Sub-menu / Description |
Default |
|
|
|
|
|
|
|
|
Setting |
|
|
|
|
|
|||
Exit |
Saves and exits the menu. |
|
|
|
|||
|
|
|
|
|
|||
Outputs Setup |
Defines physical outputs and |
|
|
|
|||
|
|
keyboard commands for use |
|
|
|
||
|
|
in a rule. |
|
|
|
|
|
|
|
|
|
|
|||
Outputs 1-3 |
Defines a physical output. |
|
N.O.: Normally open circuit |
N.O. |
|||
|
|
|
|
|
|
N.C.: Normally closed circuit |
|
|
|
|
|
|
|||
Alarm Relay |
A fixed output available for |
|
|
|
|||
|
|
use in a rule. |
|
|
|
|
|
|
|
|
|
||||
Outputs 5-12 |
Defines a command output for |
Aux On: A keyboard ON command. |
NONE. |
||||
|
|
use in a rule. |
|
|
|
Aux Off: A keyboard OFF command. |
Outputs 5 and 6 |
|
|
|
|
|
|
Shot: Recalls a preset shot. |
set to OSD and |
|
|
|
|
|
|
OSD: An on screen display. |
Shot 1 |
|
|
|
|
|
|
Transmit: Transmits a message back to |
|
|
|
|
|
|
|
the head end (available with RS-232 |
|
|
|
|
|
|
|
serial connections, Bilinx, and IP |
|
|
|
|
|
|
|
AutoDome models). |
|
|
|
|
|
|
|
AutoTrack: Activates AutoTrack. (Avail- |
|
|
|
|
|
|
|
able with 500i Series only). |
|
|
|
|
|
|
|
NONE: No command defined. |
|
|
|
|
|
|
|
|
|
Bosch Security Systems, Inc. |
VG4-200, VG4-300, VG4-500i Series User’s Manual |
F01U064036 | 1.1 | 2007.01 |
18 en | On-Screen Display Menu Navigation AutoDome Modular Camera System
2.8 Rule Setup Menu
The Rule Setup Menu shows the status of the rules and lets you add new rules or modify an existing rule. The default setting is Empty.
NOTICE! You can program a total of 12 rules. You must define the inputs and outputs before i you program a rule. See Section 2.7: Alarm I/O Setup on page 16 for instructions on configuring
alarm inputs and outputs.
|
Rule Setup... |
|
|
Rule 1 |
|
|
|
|
Exit... |
|
|
|
|
Exit... |
|
|
|
1. Rule 1 |
|
Enabled |
|
|
Enabled |
YES |
|
|
2. Rule 2 |
|
Disabled |
|
|
Input: |
|
|
|
3. Rule 3 |
|
Invalid |
|
|
Alarm Input 1 |
|
|
|
4. Rule 4 |
|
Empty |
|
|
NONE |
|
|
|
5. Rule 5 |
|
Empty |
|
|
NONE |
|
|
|
6. Rule 6 |
|
Empty |
|
|
NONE |
|
|
|
7. Rule 7 |
|
Empty |
|
|
Output: |
|
|
|
8. Rule 8 |
|
Empty |
|
|
OSD |
|
|
|
9. Rule 9 |
|
Empty |
|
|
Shot 2 |
|
|
|
10. Rule 10 |
|
Empty |
|
|
Alarm Relay |
2 sec |
|
|
11. Rule 11 |
|
Empty |
|
|
NONE |
|
|
|
12. Rule 12 |
|
Empty |
|
|
|
|
|
|
|
|
|
|
|
Right / Left: Select Period Time |
|
|
|
Focus / Iris: Select |
|
|
Focus / Iris: Select Type |
|
|
|
||
|
|
|
|
|
|
|
|
|
Rule Setup Menu Choices: |
|
|
|
|
|
|||
|
|
|
|
|
|
|
||
Menu |
|
Description |
Sub-menu / Description |
|
|
Default Setting |
||
|
|
|
|
|
|
|
|
|
Exit |
|
Saves and exits the |
|
|
|
|
|
|
|
|
menu. |
|
|
|
|
|
|
|
|
|
|
|
||||
Rule 1-12 |
|
Displays the status of a |
Enabled: The rule inputs and outputs are properly |
Empty |
||||
|
|
rule on the right side of |
defined and the rule is turned on. |
|
|
|
||
|
|
the menu. There are four |
Disabled: The rule inputs and outputs are defined |
|
||||
|
|
(4) possible rule sta- |
but the rule is turned off. |
|
|
|
||
|
|
tuses. |
Invalid: The rule has a missing or invalid input or out- |
|
||||
|
|
|
|
put. |
|
|
|
|
|
|
|
|
Empty: The rule has no inputs or outputs defined. |
|
|||
|
|
|
|
|
|
|
|
|
Selecting a Rule number provides access to its configuration menu. The Rule # Menu allows you to configure a rule from previously defined alarm inputs and outputs. Once an alarm is configured with valid inputs and outputs, it can be turned on or off (enabled or disabled) through its configuration menu.
F01U064036 | 1.1 | 2007.01 |
VG4-200, VG4-300, VG4-500i Series User’s Manual |
Bosch Security Systems, Inc. |
AutoDome Modular Camera System On-Screen Display Menu Navigation | en 19
Rule # Choices:
Menu |
Description |
Sub-menu / Description |
Default |
|
|
|
Setting |
|
|
|
|
Exit |
Saves and exits the menu. |
|
|
|
|
|
|
Enabled |
Turns the rule on or off after its |
YES to enable or NO to disable |
NO |
|
inputs and outputs have been |
|
|
|
defined. |
|
|
|
|
|
|
Input |
Toggles through a list of valid |
Alarm Inputs 1 – 7 and any additional |
NONE |
|
inputs set in the Alarm I/O Setup > |
inputs which were set in the Inputs Setup |
|
|
Inputs Setup Menu that define the |
Menu, including Aux On/Off (1-99), Shot, |
|
|
rule's inputs. A rule can have up to |
and NONE. |
|
|
four (4) inputs. |
|
|
|
|
|
|
Output |
Toggles through a list of valid out- |
Alarm Outputs 1 – 3 and any additional |
NONE |
|
puts set in the Alarm I/O Setup > |
outputs set in the Outputs Setup Menu |
|
|
Outputs Setup Menu that defines a |
including: Alarm Relay, Aux On/Off (1-99), |
|
|
rule's outputs. |
Shot, OSD, Transmit, and NONE. |
|
|
|
Some outputs, such as Alarm Outputs 1-3, |
|
|
|
Alarm Relay, and Aux On/Off can be set to |
|
|
|
be active for a specific duration of time as |
|
|
|
follows: |
|
|
|
Seconds: 1-5, 10, 15, or 30 |
|
|
|
Minutes: 1-5 or 10 |
|
|
|
Latched: The alarm stays active until |
|
|
|
acknowledged. |
|
|
|
Follows: The alarm follows the alarm rule. |
|
|
|
|
|
i |
NOTICE! You can include up to four (4) Input and Output events in a single rule. Each input |
|
and output, however, must be true for the alarm's rule to be valid and enabled. |
||
|
Bosch Security Systems, Inc. |
VG4-200, VG4-300, VG4-500i Series User’s Manual |
F01U064036 | 1.1 | 2007.01 |