Bosch UPH-Z, UPH-3D, UPH-2D User Manual

0 (0)

High Speed Pan/Tilt System

UPH-2D, UPH-3D, UPH-Z Series

en Instruction Manual

High Speed Pan/Tilt System

Table of Contents | en

3

 

 

 

Table of Contents

1

Safety

5

1.1

Important safety instructions

5

1.2

Safety precautions

6

1.3

Important notices

7

 

 

 

2

Unpacking

9

2.1

Parts List

9

2.2

Tools Required

9

2.3

Safety Rules

10

 

 

 

3

Description

10

 

 

 

4

Installing the High Speed Pan/Tilt

11

4.1

Mounting the High Speed Pan/Tilt

11

4.2

Wiring the Video Cable

14

4.3

Connecting the Power Supply

15

4.4

Wiring Biphase

16

4.5

RS-232

16

 

 

 

5

Connecting the Washer Pump (optional)

17

5.1

Connecting the Peripherals

21

 

 

 

6

Attaching the Top Unit

22

 

 

 

7

Configuring the Device

25

7.1

Baud Rate Switches

25

7.2

Protocol Switches

26

7.3

Setting the Address

26

7.3.1

Address Combinations

27

7.4

Connections

28

 

 

 

8

Switching On and Off

31

8.1

Configuring the Device

31

 

 

 

9

On-screen Display (OSD)

32

9.1

Using the Joystick

32

 

 

 

10

Moving Around the Menus

32

10.1

Keyboard Commands List

33

10.2

Changing the Settings

34

10.3

Changing the Numeric Fields

34

Bosch Security Systems

Instruction Manual

F01U.073.990 | Version 1.0 | 2007.07

4 en | Table of Contents High Speed Pan/Tilt System

11

Configuring the System

34

11.1

Language Menu

35

11.2

Display Setup Menu

35

11.2.1

Area Parameters Menu

37

11.2.2

Changing the Edit Text Menu

38

11.2.3

Display Parameters

39

11.3

Motion Parameters Menu

40

11.3.1

Speed Menu

40

11.3.2

Limits

42

11.3.3

Preset/Patrol/Autopan

43

11.3.4

Wiper-Washer

49

11.3.5

Alarms

50

11.4

Camera Parameters

50

11.4.1

UPH-2D and UPH-3D Series (DinionXF Cameras)

51

11.4.2

UPH-Z Series (camera module)

52

11.5

Creating a New Dynamic Mask

56

11.6

Load Default Configuration

58

11.7

Setup Info Menu

58

12

Maintenance

59

12.1

Cleaning

59

12.2

Replacing the Fuses

59

 

 

 

13

Troubleshooting

60

13.1

Dimensions and Range of Movement

61

 

 

 

14

Technical Specifications

63

F01U.073.990 | Version 1.0 | 2007.07

Instruction Manual

Bosch Security Systems

High Speed Pan/Tilt System

Safety | en

5

 

 

 

1Safety

1.1Important safety instructions

Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the unit.

1.Cleaning - Unplug the unit from the outlet before cleaning. Follow any instructions provided with the unit. Generally, using a dry cloth for cleaning is sufficient, but a moist fluff-free cloth or leather shammy may also be used. Do not use liquid cleaners or aerosol cleaners.

2.Heat Sources - Do not install the unit near any heat sources such as radiators, heaters, stoves, or other equipment (including amplifiers) that produce heat.

3.Object and liquid entry - Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electrical shock. Never spill liquid of any kind on the unit. Do not place objects filled with liquids, such as vases or cups, on the unit.

4.Lightning - For added protection during a lightning storm, or when leaving this unit unattended and unused for long periods, unplug the unit from the supplied voltage and disconnect the cable system. This will prevent damage to the unit from lightning and power line surges.

5.Controls adjustment - Adjust only those controls specified in the operating instructions. Improper adjustment of other controls may cause damage to the unit. Use of controls or adjustments, or performance of procedures other than those specified, may result in hazardous radiation exposure.

6.Overloading - Do not overload outlets and extension cords. This can cause fire or electrical shock.

7.Power sources - Operate the unit only from the type of power source indicated on the label. Before proceeding, be sure to disconnect the power from the cable to be installed into the unit.

For 24 VAC units, voltage applied to the unit's power input should not exceed ±10% VAC. User-supplied wiring must comply with local electrical codes (Class 2 power levels). Do not ground the supply at the terminals or at the unit's power supply terminals.

If unsure of the type of power supply to use, contact your dealer or local power company.

8.Servicing - Do not attempt to service this unit yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

9.Damage requiring service - Unplug the unit from the power source and refer servicing to qualified service personnel when any damage to the equipment has occurred, such as:

the power supply cord or plug is damaged;

liquid has been spilled in or on the equipment;

an object has fallen into the unit;

unit has been dropped or the unit cabinet is damaged;

unit exhibits a distinct change in performance;

unit does not operate normally when the user correctly follows the operating instructions.

10.Replacement parts - Be sure the service technician uses replacement parts specified by the manufacturer, or that have the same characteristics as the original parts. Unauthorized substitutions may cause fire, electrical shock, or other hazards.

Bosch Security Systems

Instruction Manual

F01U.073.990 | Version 1.0 | 2007.07

6

en | Safety

High Speed Pan/Tilt System

 

 

 

11.Safety check - Safety checks should be performed upon completion of service or repairs to the unit to ensure proper operating condition.

12.Installation - Install in accordance with the manufacturer's instructions and in accordance with applicable local codes.

13.Attachments, changes or modifications - Only use attachments/accessories specified by the manufacturer. Any change or modification of the equipment, not expressly approved by Bosch, could void the warrantee or, in the case of an authorization agreement, authority to operate the equipment.

1.2Safety precautions

DANGER! High risk:

This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the product.

If not avoided, this will result in an electrical shock, serious bodily injury, or death.

WARNING! Medium risk:

!Indicates a potentially hazardous situation.

If not avoided, this could result in serious bodily injury or death.

CAUTION! Medium risk:

Indicates a potentially hazardous situation.

!If not avoided, this may result in minor or moderate injury. Alerts the user to important instructions accompanying the unit.

CAUTION! Low risk:

Indicates a potentially hazardous situation.

if not avoided, this may result in property damage or risk of damage to the unit.

NOTICE!

i This symbol indicates information or a company policy that relates directly or indirectly to the safety of personnel or protection of property.

F01U.073.990 | Version 1.0 | 2007.07

Instruction Manual

Bosch Security Systems

High Speed Pan/Tilt System

Safety | en

7

 

 

 

1.3Important notices

Accessories - Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit may fall, causing serious injury and/or serious damage to the unit. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer. When a cart is used, use caution and care when moving the cart/apparatus combination to avoid injury from tip-over. Quick stops, excessive force, or uneven surfaces may cause the cart/unit combination to overturn. Mount the unit per the manufacturer's instructions.

CAUTION!

Incorporate an all-pole magnetic and residual current power switch, with a contact separation of at least 3 mm in each pole,

! into the electrical installation of the building. If it is needed to open the housing for servicing and/or other activities, use this all-pole switch as the main disconnect device for switching off the voltage to the unit.

Camera signal - Protect the cable with a primary protector if the camera signal is beyond 140 feet, in accordance with NEC800 (CEC Section 60).

Coax grounding:

Ground the cable system if connecting an outside cable system to the unit.

Connect outdoor equipment to the unit's inputs only after this unit has had its grounding plug connected to a grounded outlet or its ground terminal is properly connected to a ground source.

Disconnect the unit's input connectors from outdoor equipment before disconnecting the grounding plug or grounding terminal.

Follow proper safety precautions such as grounding for any outdoor device connected to this unit.

Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working life, must be collected and disposed of separately from household waste material. Separate collecting systems are usually in place for disused electronic and electrical products. Please dispose of these units at an environmentally compatible recycling facility, per European Directive 2002/96/EC. Environmental statement - Bosch has a strong commitment towards the environment. This unit has been designed to respect the environment as much as possible. Electrostatic-sensitive device - Use proper ESD handling precautions to avoid electrostatic discharge.

NOTE: Wear required grounded wrist straps and observe proper ESD precautions when handling the electrostatic-sensitive printed circuit boards.

Grounding and polarization - This unit may be equipped with a 3-wire grounding connector for earth grounding.

Moving - Disconnect the power before moving the unit. Move the unit with care. Excessive force or shock may damage the unit.

Outdoor signals - The installation for outdoor signals, especially regarding clearance from power and lightning conductors and transient protection.

Permanently connected equipment - Incorporate a readily accessible disconnect device in the building installation wiring.

Video loss - Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of lost digital information, Bosch Security Systems recommends multiple,

Bosch Security Systems

Instruction Manual

F01U.073.990 | Version 1.0 | 2007.07

8

en | Safety

High Speed Pan/Tilt System

 

 

 

redundant recording systems, and a procedure to back up all analog and digital information.

Copyright

This user guide is the intellectual property of Bosch Security Systems and is protected by copyright.

All rights reserved.

Trademarks

All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.

NOTICE!

This user guide has been compiled with great care and the information it contains has been thoroughly verified. The text

i was complete and correct at the time of printing. The ongoing development of the products may mean that the content of the user guide can change without notice. Bosch Security Systems accepts no liability for damage resulting directly or indirectly from faults, incompleteness or discrepancies between the user guide and the product described.

F01U.073.990 | Version 1.0 | 2007.07

Instruction Manual

Bosch Security Systems

High Speed Pan/Tilt System

Unpacking | en

9

 

 

 

2 Unpacking

This equipment should be unpacked and handled with care. If an item appears to have been damaged in shipment, notify the shipper immediately.

Verify that all the parts listed in Section 2.1 Parts List are included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representative.

The original packing carton is the safest container in which to transport the unit and must be used if returning the unit for service. Save it for possible future use.

2.1

Parts List

The High Speed Pan/Tilt System includes the following components:

One (1) Unitized Pan Head (UPH) device

One (1) small box of accessories:

One (1) 4 mm allen wrench

One (1) moisture bag with salt, metal fixing accessory and two (2) fixing screws

One (1) serial extension cable

One (1) serial adapter

One (1) safety label

One (1) instruction manual

Two (2) tie thread

One (1) plastic tube

One (1) box containing:

One (1) base with power supply box

2.2

Tools Required

 

Small, straight-blade screwdriver - 2.5 mm (0.1 in.)

 

3 mm Allen wrench

Bosch Security Systems

Instruction Manual

F01U.073.990 | Version 1.0 | 2007.07

10 en | Description High Speed Pan/Tilt System

2.3 Safety Rules

To ensure safety, the following warnings are specified:

The device must be installed and maintained by skilled technical personnel.

Connect the device to a power source corresponding to the indications given on the marking label.

The device has been designed for permanent installation in a building or other suitable structure.

Moving parts may result in risk of injury, therefore, the device should be mounted so that it is accessible only to the technician/installer.

Place the safety label near the UPH. See Figure 6.4 for illustration of safety label.

Before carrying out any technical work on the UPH, tilt the UPH all the way up or all the way down, then disconnect the power supply and cables from all other devices.

Do not use power cables with signs of wear or aging.

Do not use the device in the presence of inflammable substances.

Do not allow children or unauthorized personnel to use the device.

The device should be switched OFF when the power supply has been disconnected and the connecting cables to other devices have been removed.

Keep this manual for future reference.

CAUTION! Before disconnecting the power supply to the UPH, tilt the device either all the way up or all the way down. When the UPH loses power,

!depending on how it is positioned, the unit may drop slightly forward or backward. Therefore, failure in correctly positioning the UPH before disconnecting the power supply may result in personal injury or possible damage to the device.

3 Description

The Bosch High-Speed Positioning System is a complete, high-performance, high quality solution that can pan 360 degrees continuously at speeds of up to 100 degrees per second. An extensive range of options lets you tailor the system to your specific requirements. For exam-

ple, a wide variety of video cameras and lenses, including the optimized DinionXF camera and zoom combinations, are available.

F01U.073.990 | Version 1.0 | 2007.07

Instruction Manual

Bosch Security Systems

High Speed Pan/Tilt System Installing the High Speed Pan/Tilt | en 11

4 Installing the High Speed Pan/Tilt

This chapter outlines the procedures needed to install the High Speed Pan/Tilt. Installation should only be done by qualified service personnel in conformance to all local codes.

NOTICE!

i The High Speed Pan/Tilt unit cannot be mounted upside down! This will stress bearings and mechanical components; no liabilities are accepted and all warranties are void.

4.1

Mounting the High Speed Pan/Tilt

The High Speed Pan/Tilt System can be mounted with either a wall mount (MTC-WUPH, sold separately) or pole mount (MTC-PUPH, sold seperately).

To install the device, proceed as follows:

1.Determine the location to install the device.

When selecting a location, a minimum clearance of 300 mm (12 in.) in front of the unit and 300 mm (12 in.) in back of the unit is required to facilitate component removal and installation.

The device should be installed vertically. Any other position could impair the performance of the device.

Do not attach the device upside down.

2.Insert the cables into the optional wall or pole mount so they protrude approximately

.5 m (19.7 in.) (see Figure 4.1).

.5 m 2

19.7 in.

.5 m

1

MTC-PUPH

19.7 in.

MTC-WUPH

Fig. 4.1 Optional Wall Mount (1) or Pole Mount (2)

WARNING! Medium Risk:

!The cables should not be accessible by unauthorized personnel; cables should be secured to fixed locations at appropriate intervals to bare the weight of the cables, e.g. cables running inside a tall camera pole.

Bosch Security Systems

Instruction Manual

F01U.073.990 | Version 1.0 | 2007.07

12 en | Installing the High Speed Pan/Tilt

High Speed Pan/Tilt System

 

 

CAUTION! Medium Risk:

Be sure to use appropriately strong and load bearing bolts and other fixing

!materials when installing any UPH mountings to any surface.

When the MTC-WUPH Wall Mount is fixed to a wall, each fixing dowel must be able to support a traction load of 300daN or more. It is necessary to use 8 mm (0.315 in.) diameter bolts with appropriate length.

3.Attach the optional wall or pole mount according to the specific mounting manual (see Table 4.1 for mounting options).

Part #

Description

 

 

MTC-PUPH

Outdoor Pole Mount for UPH Series

 

 

MTC-WUPH

Outdoor Wall Mount for UPH Series

 

 

MTC-POLE-W

Pole Adapter for MTC-WUPH

 

 

MTC-CORN-W

Corner Adapter for MTC-WUPH

 

 

Table 4.1 Mounting Options

NOTICE!

i If using a washer kit, the spray support should be installed before positioning and wiring the pan/tilt. For additional information, see Section 5 Connecting the Washer Pump (optional).

4.Remove the cable glands from the base and fit the gasket / seal ring (see Figure 4.3).

5.Insert the cables into the cable glands while holding the base approx. 20 cm from the bracket (see Figure 4.2). Note that there are three glands; one for power, one for video, and one for data / IO cables.

Fig. 4.2 Inserting the Cables through the Cable Glands

6.Securely lock the cable glands into place (gland closing torque 5 Nm); they accept cables 5-10 mm in diameter. The cable glands can be changed to accept smaller 3-7 mm in diameter cables, available from www.cembre.com and browse "Cable glands IP68 MAXIblock" (model number: 1910.M16 M16x1.5 ). The gland (5-10 mm or 3-7 mm) closing torque is 5 Nm; use a calibrated torque wrench to ensure closure.

7.Position the base on the optional wall or pole mount, guiding the cables so that they are positioned inside the wall or pole mount (see Figure 4.3).

F01U.073.990 | Version 1.0 | 2007.07

Instruction Manual

Bosch Security Systems

High Speed Pan/Tilt System

Installing the High Speed Pan/Tilt | en 13

 

 

8.Fasten the base to the wall or pole mount with the supplied screws and washers (use a calibrated torque wrench setting of 2.1 Nm).

 

 

 

1

 

1

6

 

 

2

7

2

 

 

 

 

3

 

3

 

 

 

4

 

4

 

 

 

 

 

5

 

5

 

 

 

Fig. 4.3 Wiring the Device

 

 

Reference #

Description

 

 

1

Base

 

 

2

Gasket

 

 

3

Screw Ring

 

 

4

Washer

 

 

5

Screw

 

 

6

Bracket

 

 

7

Support

 

 

Fig. 4.4 Preparing the Cables for Wiring

9.Cut the cables to approximately 152.4 mm (6 in) (see Figure 4.4). The earth cable must be longer then the power wires approximately 10 mm or more to prevent the stretch disconnecting.

10.Cover the cable with a plastic tube and fix it with the tie thread.

Bosch Security Systems

Instruction Manual

F01U.073.990 | Version 1.0 | 2007.07

14 en | Installing the High Speed Pan/Tilt

High Speed Pan/Tilt System

 

 

11.Make a group with all signal cables and fix them with the tie thread. Figure 4.5 indicates a proper cable connection.

 

Fig. 4.5 Tie Threads used to Group and Secure Signal Cables

4.2

Wiring the Video Cable

To wire the video cable, proceed as follows:

1.Strip the video cable with a pair of wire strippers.

2.Cut the length of the center conductor and the braid to approximatley 30 mm (1.2 in.).

3.Twist the braid into a single conductor.

4.Use a small screwdriver to press down on the GND push latch (see Figure 4.6) and attach the single braid to the GND terminal.

5.Use a small screwdriver to press down on the VIDEO push latch (see Figure 4.6) and attach the center conductor to the VIDEO terminal.

Fig. 4.6 Wiring the Terminal

Note: The above terminals support AWG 20 (0.5 mm2) to AWG 28 (0.08 mm2).

F01U.073.990 | Version 1.0 | 2007.07

Instruction Manual

Bosch Security Systems

High Speed Pan/Tilt System Installing the High Speed Pan/Tilt | en 15

4.3 Connecting the Power Supply

The base with power supply box is available in two (2) power supply voltages (24 VAC or 230 VAC). Before proceeding with the installation, check the identification label of the product to verify that the device coincides with the power supply requirements.

!

CAUTION!

When connecting the base, make sure the power supply is disconnected and

that the disconnecting switch is open.

When the base is opened, the power supply board appears as shown below. To connect the power supply, make the connections as seen in Figure 4.7.

Power Supply and Bi-polar Disconnecting Switch

Fig. 4.7 Connecting the Power Supply

To wire the power cable (not supplied), use Table 4.2 to attach the appropriate colored wire to the appropriate terminal.

Wire Color

24 VAC Terminal Connection

 

 

Per local Installer

Neutral

 

 

Per local Installer

Live/Active

 

 

Green/Yellow

Earth

 

 

Wire Color

230 VAC Terminal Connection

 

 

Blue

Neutral

 

 

Brown

Live/Active

 

 

Green/Yellow

Earth

 

 

Table 4.2 Terminal Connections

Bosch Security Systems

Instruction Manual

F01U.073.990 | Version 1.0 | 2007.07

16 en | Installing the High Speed Pan/Tilt

High Speed Pan/Tilt System

 

 

Note: The power cable must be double insulated, i.e. each separate cable is individually insulated, then contained in an outer insulated cover. The cable type must be chosen in accor-

dance with local and national wiring rules; recommended cable type H05RN-F 1mm2 both for 24 VAC and 230 VAC installations.

CAUTION!

!changes or connections that are not described in this handbook. Failure to follow the instructions indicated in this manual may result in system or safety hazards, thus invalidating the guarantee.The device must be wired by skilled technical personnel. Never make any

!

CAUTION!

When wiring for external/outdoor environments, be sure to use appropriately

rated cables.

4.4

Wiring Biphase

 

To wire for Biphase, connect the C+ terminal wire to the B+ terminal and the C- terminal wire

 

to the B- terminal respectively.

4.5

RS-232

 

RS-232 is used for firmware upgrades only (see Figure 4.8).

 

 

 

 

 

 

 

 

 

 

Fig. 4.8 RS-232 Location

F01U.073.990 | Version 1.0 | 2007.07

Instruction Manual

Bosch Security Systems

High Speed Pan/Tilt System Connecting the Washer Pump (optional) | en 17

5 Connecting the Washer Pump (optional)

The device must be wired by skilled technical personnel. Never make any

!changes or connections that are not described in this handbook. Failure to follow the instructions indicated in this manual may result in system or safety hazards, thus invalidating the guarantee.

The High Speed Pan/Tilt System may have an optional washer pump. To connect the washer pump for the HAC-WAS05-20, HAC-WAS05-50, and HAC-WAS30-50, proceed as follows:

1.Attach the mount, (optional wall or pole mount) by positioning the washer pipe support in the desired position (see Figure 5.1).

1

2

3

4

5

6

7

8

Fig. 5.1 Installing the Washer Cables

Reference #

Description

 

 

1

Base

 

 

2

Cable Glands

 

 

3

Washer Pipe Support

 

 

4

Gasket

 

 

5

Screw Seals

 

 

6

Bracket or Pole Support

 

 

7

Washers

 

 

8

Screws

 

 

Bosch Security Systems

Instruction Manual

F01U.073.990 | Version 1.0 | 2007.07

18 en | Connecting the Washer Pump (optional)

High Speed Pan/Tilt System

 

 

2.Insert the cables inside the mount so they protrude approximately 0.5 m (19.7 in.).

3.Insert the cable into the cable glands and, keeping the base at about 20 cm (7.9 in.) from the support, lock the cable glands.

4.Set the base on the mount, aiding the cables to achieve the correct position inside.

5.Attach the base to the mount using the supplied screws.

6.Cut the cables to size and either restore or make the connections to the positioning unit.

7.After you have attached the base to the mount, shorten the washer pipe as required and attach it to the coupling as follows:

a.unfasten the nut from the coupling,

b.insert it into the pipe,

c.insert the end of the pipe onto the nosecap.

d.Lock the nut to the coupling (see Figure 5.2).

1

5

2 3

6

7

4

8

9

Fig. 5.2 Installing the Washer Pipe

Reference #

Description

 

 

1

Washer Pipe

 

 

2

Nut

 

 

3

Nosecap

 

 

4

Coupling

 

 

5

Bracket

 

 

6

Noseclip

 

 

7

Screws

 

 

8

Washers

 

 

9

Delivery Hose

 

 

8.Attach the pipe to the washer support using the supplied bracket, screws, and washers.

9.Lock the coupling using the supplied hoseclip and connect the delivery hose.

10.Calibrate the jet (see Figure 5.3) by directing the nozzle towards the glass of the housing.

F01U.073.990 | Version 1.0 | 2007.07

Instruction Manual

Bosch Security Systems

Bosch UPH-Z, UPH-3D, UPH-2D User Manual

High Speed Pan/Tilt System

Connecting the Washer Pump (optional) | en 19

 

 

1

Fig. 5.3 Calibrating the Nozzle

The diagram below refers to the 19-pin connector on the base board of the pan/tilt.

Fig. 5.4 Connecting the Washer Pump

Bosch Security Systems

Instruction Manual

F01U.073.990 | Version 1.0 | 2007.07

20 en | Connecting the Washer Pump (optional) High Speed Pan/Tilt System

Reference

Description

 

 

 

 

 

 

Alarm input, voltage-controlled (10-35 V), to

 

 

monitor the presence of water in the tank.

 

AL1

For devices with level sensors (HAC-WAS05-50,

 

HAC-WAS30-50), closure of the contact, if

 

 

 

 

enabled, generates an on-screen alarm (see

 

 

Figure 11.3.5 to configure the alarm).

 

 

 

 

 

O1-C1

Clean contact for starting the water pump.

 

 

 

 

 

K1

Power relay (external), able to start the water

 

pump.

 

 

 

 

 

 

 

 

Wiper power supply (max 24 Vac – 0.75 A from

 

 

TR3 and TR4), from safety transformer housed

 

F1-F2

in the base of the device (factory fitted with

 

wiper option).

 

 

 

 

Note: Only required for UPH-Z Series; not

 

 

required for UPH-2D or UPH-3D Series.

 

 

 

 

 

 

 

 

 

 

 

 

 

Fig. 5.5 Connecting the Washer System with Level Sensor Capabilities

NOTICE!

i The HAC-WAS05-10 washer system does not have a level sensor. Therefore, it is not necessary to connect the alarm input.

F01U.073.990 | Version 1.0 | 2007.07

Instruction Manual

Bosch Security Systems

Loading...
+ 44 hidden pages