Bosch UML-262-90, UML-422-90 User Manual

0 (0)

Full HD LCD Monitors

UML-262-90 | UML-422-90

en User’s Manual

Full HD LCD Monitors

Table of Contents | en 3

 

 

Table of Contents

 

 

 

 

1

Safety

5

1.1

Important safety instructions

5

1.2

Safety precautions

8

1.3

Important notices

8

1.4

Customer Support and Service

15

 

 

 

2

Unpacking

17

2.1

Parts List

17

 

 

 

3

Monitor Panels

18

3.1

UML-262-90 Front Control Panel

18

3.2

UML-262-90 Bottom Panel

19

3.3

UML-422-90 Front Panel

19

3.4

UML-422-90 Rear Control Panel

20

3.5

UML-422-90 Bottom Panel

21

3.6

Remote Control

22

3.7

Remote Control Battery Installation

24

 

 

 

4

Description

25

4.1

Features

25

4.2

Power

26

Bosch Security Systems, Inc.

User’s Manual

F.01U.172.600 | 1.0 | 2010.10

4 en | Table of Contents

Full HD LCD Monitors

 

 

 

 

 

 

 

 

5

Installing the Monitor

 

27

5.1

Ventilation

 

27

5.2

Mounting the Monitor

 

27

5.2.1

Desktop Installation

 

27

5.2.2

Wall Mount Installation

 

29

5.3

Connecting the Composite Video Signal to the Monitor

30

5.4

Connecting the Y/C (S-Video) Signal to the Monitor

31

5.5

Connecting Audio to the Monitor

 

31

5.6

Connecting the PC Signal to the Monitor

 

32

5.6.1

HDMI Connection

 

32

5.6.2

DVI Connection

 

32

5.6.3

VGA Connection

 

32

5.7

Connecting an Alarm Trigger

 

33

5.8

Single / Multiple Monitor Configuration

 

35

 

 

 

 

6

Navigating the Monitor

 

37

6.1

Navigating the Front Panel

 

37

6.2

Navigating the Monitor On-screen Display (OSD)

38

6.3

On-screen Display Menus

 

39

6.4

Custom Menu

 

40

6.5

Picture/Sound Menu

 

41

6.6

PIP Menu

 

44

6.7

Setup Menu

 

45

 

 

 

 

7

Power Management

 

48

7.1

Power Consumption

 

48

7.2

LED Indicator

 

48

 

 

 

 

8

Troubleshooting

 

49

 

 

 

 

9

Maintenance

 

50

 

 

 

 

10

Technical Specifications

 

51

F.01U.172.600 | 1.0 | 2010.10

User’s Manual

Bosch Security Systems, Inc.

Full HD LCD Monitors

Safety | en 5

 

 

1Safety

1.1Important safety instructions

Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the unit.

1.Cleaning - Unplug the unit from the outlet before cleaning. Follow any instructions provided with the unit. Generally, using a dry cloth for cleaning is sufficient, but a moist flufffree cloth or leather shammy may also be used. Do not use liquid cleaners or aerosol cleaners.

2.Heat Sources - Do not install the unit near any heat sources such as radiators, heaters, stoves, or other equipment (including amplifiers) that produce heat.

3.Ventilation - Any openings in the unit enclosure are provided for ventilation to prevent overheating and ensure reliable operation. Do not block or cover these openings. Do not place the unit in an enclosure unless proper ventilation is provided, or the manufacturer's instructions have been adhered to.

4.Water - Do not use this unit near water, for example near a bathtub, washbowl, sink, laundry basket, in a damp or wet basement, near a swimming pool, in an outdoor installation, or in any area classified as a wet location. To reduce the risk of fire or electrical shock, do not expose this unit to rain or moisture.

5.Object and liquid entry - Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electrical shock. Never spill liquid of any kind on the unit. Do not place objects filled with liquids, such as vases or cups, on the unit.

6.Lightning - For added protection during a lightning storm, or when leaving this unit unattended and unused for long periods, unplug the unit from the wall outlet and

Bosch Security Systems, Inc.

User’s Manual

F.01U.172.600 | 1.0 | 2010.10

6 en | Safety

Full HD LCD Monitors

 

 

disconnect the cable system. This will prevent damage to the unit from lightning and power line surges.

7.Controls adjustment - Adjust only those controls specified in the operating instructions. Improper adjustment of other controls may cause damage to the unit. Use of controls or adjustments, or performance of procedures other than those specified, may result in hazardous radiation exposure.

8.Overloading - Do not overload outlets and extension cords. This can cause fire or electrical shock.

9.Power cord and plug protection - Protect the plug and power cord from foot traffic, being pinched by items placed upon or against them at electrical outlets, and its exit from the unit.

10.Power disconnect - Units have power supplied to the unit whenever the power cord is inserted into the power source. The power cord is the main power disconnect device for switching off the voltage for all units.

11.Power sources - Operate the unit only from the type of power source indicated on the label. Before proceeding, be sure to disconnect the power from the cable to be installed into the unit.

For battery powered units, refer to the operating instructions.

For external power supplied units, use only the recommended or approved power supplies.

For limited power source units, this power source must comply with EN60950. Substitutions may damage the unit or cause fire or shock.

If unsure of the type of power supply to use, contact your dealer or local power company.

12.Servicing - Do not attempt to service this unit yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

F.01U.172.600 | 1.0 | 2010.10

User’s Manual

Bosch Security Systems, Inc.

Full HD LCD Monitors

Safety | en 7

 

 

13.Damage requiring service - Unplug the unit from the main AC power source and refer servicing to qualified service personnel when any damage to the equipment has occurred, such as:

the power supply cord or plug is damaged;

exposure to moisture, water, and/or inclement weather (rain, snow, etc.);

liquid has been spilled in or on the equipment;

an object has fallen into the unit;

unit has been dropped or the unit cabinet is damaged;

unit exhibits a distinct change in performance;

unit does not operate normally when the user correctly follows the operating instructions.

14.Replacement parts - Be sure the service technician uses replacement parts specified by the manufacturer, or that have the same characteristics as the original parts.

Unauthorized substitutions may cause fire, electrical shock, or other hazards.

15.Safety check - Safety checks should be performed upon completion of service or repairs to the unit to ensure proper operating condition.

16.Installation - Install in accordance with the manufacturer's instructions and in accordance with applicable local codes.

17.Attachments, changes or modifications - Only use attachments/accessories specified by the manufacturer. Any change or modification of the equipment, not expressly approved by Bosch, could void the warranty or, in the case of an authorization agreement, authority to operate the equipment.

Bosch Security Systems, Inc.

User’s Manual

F.01U.172.600 | 1.0 | 2010.10

Bosch UML-262-90, UML-422-90 User Manual

8 en | Safety

Full HD LCD Monitors

 

 

1.2Safety precautions

DANGER!

High risk: This symbol indicates an imminently hazardous situation such as “Dangerous Voltage” inside the product. If not avoided, this will result in an electrical shock, serious bodily injury, or death.

WARNING!

Medium risk: Indicates a potentially hazardous situation.

If not avoided, this could result in minor or moderate bodily injury.

CAUTION!

Low risk: Indicates a potentially hazardous situation.

If not avoided, this could result in property damage or risk of damage to the unit.

1.3Important notices

Accessories - Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit may fall, causing serious injury and/or serious damage to the unit. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer. When a cart is used, use caution and care when moving the cart/apparatus combination to avoid injury from tip-over. Quick stops, excessive force, or uneven surfaces may cause the cart/unit combination to overturn. Mount the unit per the manufacturer's instructions.

All-pole power switch - Incorporate an all-pole power switch, with a contact separation of at least 3 mm in each pole, into the electrical installation of the building. If it is needed to open the housing for servicing and/or other activities, use this all-pole switch as the main disconnect device for switching off the voltage to the unit.

F.01U.172.600 | 1.0 | 2010.10

User’s Manual

Bosch Security Systems, Inc.

Full HD LCD Monitors

Safety | en 9

 

 

Coax grounding:

Ground the cable system if connecting an outside cable system to the unit.

Connect outdoor equipment to the unit's inputs only after this unit has had its grounding plug connected to a grounded outlet or its ground terminal is properly connected to a ground source.

Disconnect the unit's input connectors from outdoor equipment before disconnecting the grounding plug or grounding terminal.

Follow proper safety precautions such as grounding for any outdoor device connected to this unit.

U.S.A. models only - Section 810 of the National Electrical Code, ANSI/NFPA No.70, provides information regarding proper grounding of the mount and supporting structure, grounding of the coax to a discharge unit, size of grounding conductors, location of discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working life, must be collected and disposed of separately from household waste material. Separate collecting systems are usually in place for disused electronic and electrical products. Please dispose of these units at an environmentally compatible recycling facility, per European Directive 2002/96/ EC

Electronic Surveillance - This device is intended for use in public areas only. U.S. federal law strictly prohibits surreptitious recording of oral communications. Environmental statement - Bosch has a strong commitment towards the environment. This unit has been designed to respect the environment as much as possible.

Electrostatic-sensitive device - Use proper CMOS/MOS-FET handling precautions to avoid electrostatic discharge.

Bosch Security Systems, Inc.

User’s Manual

F.01U.172.600 | 1.0 | 2010.10

10 en | Safety

Full HD LCD Monitors

 

 

NOTE: Wear required grounded wrist straps and observe proper ESD safety precautions when handling the electrostaticsensitive printed circuit boards.

Fuse rating - For security protection of the device, the branch circuit protection must be secured with a maximum fuse rating of 16A. This must be in accordance with NEC800 (CEC Section 60).

Grounding and polarization - This unit may be equipped with a polarized alternating current line plug (a plug with one blade wider than the other blade). This safety feature allows the plug to fit into the power outlet in only one way. If unable to insert the plug fully into the outlet, contact a locally certified electrician to replace the obsolete outlet. Do not defeat the safety purpose of the polarized plug.

Alternately, this unit may be equipped with a 3-pole grounding plug (a plug with a third pin for earth grounding). This safety feature allows the plug to fit into a grounded power outlet only. If unable to insert the plug into the outlet, contact a locally certified electrician to replace the obsolete outlet. Do not defeat the safety purpose of the grounding plug.

Moving - Disconnect the power before moving the unit. Move the unit with care. Excessive force or shock may damage the unit and the hard disk drives.

Outdoor signals - The installation for outdoor signals, especially regarding clearance from power and lightning conductors and transient protection, must be in accordance with NEC725 and

NEC800 (CEC Rule 16-224 and CEC Section 60).

Permanently connected equipment - Incorporate a readily accessible disconnect device in the building installation wiring. Pluggable equipment - Install the socket outlet near the equipment so it is easily accessible.

Power resupply - If the unit is forced to power down due to exceeding the specified operating temperatures, disconnect the power cord, wait for at least 30 seconds, and then reconnect the power cord.

F.01U.172.600 | 1.0 | 2010.10

User’s Manual

Bosch Security Systems, Inc.

Full HD LCD Monitors

Safety | en 11

 

 

Power lines - Do not locate the display near overhead power lines, power circuits, or electrical lights, nor where it may contact such power lines, circuits, or lights.

Rack-mount

Ventilation - Do not place this unit in a built-in installation or rack without proper ventilation or adhering to the manufacturer's instructions. The equipment must not exceed its maximum operating temperature requirements.

Mechanical loading - Properly mount the equipment in a rack to prevent a hazardous condition due to uneven

mechanical loading.

SELV

All the input/output ports are Safety Extra Low Voltage (SELV) circuits. SELV circuits should only be connected to other SELV circuits.

Because the ISDN circuits are treated like telephone-network voltage, avoid connecting the SELV circuit to the Telephone Network Voltage (TNV) circuits.

System ground/Safety ground

The system ground is only used to comply with safety standards or installation practices in certain countries. Bosch does not recommend connecting system ground to safety ground unless it is explicitly required. However, if the system ground and safety ground are connected and grounding loops are causing interference in the video signal, use an isolation transformer (available separately from Bosch).

CAUTION!

Connecting System ground to Safety ground may result in ground loops that can disrupt the CCTV system.

Video loss - Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of lost digital information, Bosch Security Systems recommends multiple, redundant recording systems, and a procedure to back up all analog and digital information.

Bosch Security Systems, Inc.

User’s Manual

F.01U.172.600 | 1.0 | 2010.10

12 en | Safety

Full HD LCD Monitors

 

 

NOTICE!

This is a class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures.

FCC & ICES Information

(U.S.A. and Canadian Models Only)

This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions:

this device may not cause harmful interference, and

this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules and ICES-003 of Industry Canada. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and radiates radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his expense.

Intentional or unintentional modifications, not expressly approved by the party responsible for compliance, shall not be made. Any such modifications could void the user's authority to operate the equipment. If necessary, the user should consult the dealer or an experienced radio/television technician for corrective action.

The user may find the following booklet, prepared by the Federal Communications Commission, helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4.

F.01U.172.600 | 1.0 | 2010.10

User’s Manual

Bosch Security Systems, Inc.

Full HD LCD Monitors

Safety | en 13

 

 

Informations FCC et ICES

(modèles utilisés aux États-Unis et au Canada uniquement)

Ce produit est conforme aux normes FCC partie 15. la mise en service est soumises aux deux conditions suivantes :

cet appareil ne peut pas provoquer d'interférence nuisible et

cet appareil doit pouvoir tolérer toutes les interférences auxquelles il est soumit, y compris les interférences qui pourraient influer sur son bon fonctionnement.

AVERTISSEMENT : Suite à différents tests, cet appareil s’est révélé conforme aux exigences imposées aux appareils numériques de Classe A en vertu de la section 15 du règlement de la Commission fédérale des communications des États-Unis (FCC). Ces contraintes sont destinées à fournir une protection raisonnable contre les interférences nuisibles quand l'appareil est utilisé dans une installation commerciale. Cette appareil génère, utilise et émet de l'energie de fréquence radio, et peut, en cas d'installation ou d'utilisation non conforme aux instructions, générer des interférences nuisibles aux communications radio. L’utilisation de ce produit dans une zone résidentielle peut provoquer des interférences nuisibles. Le cas échéant, l’utilisateur devra remédier à ces interférences à ses propres frais.

Au besoin, l’utilisateur consultera son revendeur ou un technicien qualifié en radio/télévision, qui procédera à une opération corrective. La brochure suivante, publiée par la Commission fédérale des communications (FCC), peut s’avérer utile : How to Identify and Resolve Radio-TV Interference Problems (Comment identifier et résoudre les problèmes d’interférences de radio et de télévision). Cette brochure est disponible auprès du U.S. Government Printing Office, Washington, DC 20402, États-Unis, sous la référence n° 004-000-00345-4.

Bosch Security Systems, Inc.

User’s Manual

F.01U.172.600 | 1.0 | 2010.10

14 en | Safety

Full HD LCD Monitors

 

 

Disclaimer

Underwriter Laboratories Inc. (“UL”) has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested fire, shock and/or casualty hazards as outlined in UL's Standard(s) for Safety for Closed Circuit Television Equipment, UL 2044. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product.

UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.

Disclaimer

Underwriter Laboratories Inc. (“UL”) has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested fire, shock and/or casualty hazards as outlined in UL's Standard(s) for Safety for Information Technology Equipment, UL 60950-1. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product.

UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING-RELATED FUNCTIONS OF THIS PRODUCT.

Copyright

This manual is the intellectual property of Bosch Security Systems and is protected by copyright.

All rights reserved.

Trademarks

All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.

F.01U.172.600 | 1.0 | 2010.10

User’s Manual

Bosch Security Systems, Inc.

Full HD LCD Monitors

Safety | en 15

 

 

NOTE!

This manual has been compiled with great care and the information it contains has been thoroughly verified. The text was complete and correct at the time of printing. The ongoing development of the products may mean that the content of the user guide can change without notice. Bosch Security Systems accepts no liability for damage resulting directly or indirectly from faults, incompleteness or discrepancies between the user guide and the product described.

1.4Customer Support and Service

If this unit needs service, contact the nearest Bosch Security Systems Service Center for authorization to return and shipping instructions.

Service Centers USA

Repair Center- Telephone: 800-566-2283 Fax: 800-366-1329

E-mail: repair@us.bosch.com

Customer Service

Telephone: 888-289-0096 Fax: 585-223-9180

E-mail: security.sales@us.bosch.com

Technical Support

Telephone: 800-326-1450

Fax: 585-223-3508 or 717-735-6560 E-mail: technical.support@us.bosch.com

Canada

Telephone: 514-738-2434 Fax: 514-738-8480

Europe, Middle East, Africa Region Repair Center

Telephone: 31 (0) 76-5721500 Fax: 31 (0) 76-5721413

E-mail: RMADesk.STService@nl.bosch.com

Bosch Security Systems, Inc.

User’s Manual

F.01U.172.600 | 1.0 | 2010.10

16 en | Safety

Full HD LCD Monitors

 

 

Asia Region Repair Center

Telephone: 65 63522776 Fax: 65 63521776

E-mail: rmahelpdesk@sg.bosch.com

Customer Service

Telephone: 86 (0) 756 7633117 or 86 (0) 756 7633121

Fax: 86 (0) 756 7631710

E-mail: customer.service@cn.bosch.com

Warranty and more information

For additional information and warranty queries, please contact your Bosch Security Systems representative or visit our website at www.boschsecurity.com.

F.01U.172.600 | 1.0 | 2010.10

User’s Manual

Bosch Security Systems, Inc.

Full HD LCD Monitors

Unpacking | en 17

 

 

2Unpacking

This equipment should be unpacked and handled with care. If an item appears to have been damaged in shipment, notify the shipper immediately.

Verify that all the parts listed in the Parts List below are included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representative.

The original packing carton is the safest container in which to transport the unit and must be used if returning the unit for service. Save it for possible future use.

2.1Parts List

Quantity

Description

1

UML-262-90 or UML-422-90 Color LCD Flat Panel

 

Monitor

 

 

1

Installation Manual

 

(printed booklet, English version)

 

 

1

Installation Manual

 

(printed booklet, Japanese version)

 

 

1

Installation manual

 

(CD-ROM, multi-language version)

 

 

2

Power Cords, 3-wire with grounded plug 1.8 m (6 ft)

 

long: one with a U.S plug type and one with a

 

European Continental plug type

 

 

1

Power adapter (UML-262-90 only)

1

DVI-D to DVI-D cable, 1.8 m (6 ft)

1

VGA to VGA (D-Sub) cable, 1.8 m (6 ft)

1

Trigger cable

1

Remote control

2

AAA batteries

Bosch Security Systems, Inc.

User’s Manual

F.01U.172.600 | 1.0 | 2010.10

Loading...
+ 37 hidden pages