UHI-OG-0
Video | UHI‑OG(S)‑0 Indoor Camera Housing
UHI‑OG(S)‑0 Indoor Camera Housing
www.boschsecurity.com
u Protects camera/lens combinations up to 317 mm
(12.48 in) length
u Hinged side opening for easy installation and
camera setup
u Strong aluminum construction
u Cable routing through base or rear of housing
u Tamper-resistant
The Indoor Camera Housing is a smartly styled unit,
intended for use inside. This housing is both cost-
competitive and installer-friendly.
Functions
Easy installation
The unique, hinged, side-opening design provides easy
installation of all camera/lens combinations, and
allows access to most camera and lens controls when
the housing is mounted. Route power, video, and lens
control cabling through the liquid-tight fittings in the
bottom rear of the housing, or for even better cable
management, via the feed-through entry holes in the
base. Mounting holes in the base permit installation to
a wide range of pan/tilts, adjustable heads, and
various camera-mounting brackets.
Dinion ready
This housing supports installation of Dinion style
cameras with fixed focal, varifocal, or up to a 15x
motorized zoom lens.
Secure
For increased security, the units come with tamper-
resistant screws for the locking clasps to prevent
illegitimate access to the housing contents. The
housing is an optimal solution for protecting your
indoor video surveillance applications.
Certifications and approvals
Safety acc. to EN 60950-1 (CE)
acc. to UL 2044-1; CAN/CSA C 22.2 no. 1-98
Immunity acc. to EN 50130-4 (CE)
Emission
acc. to EN 55022 class B (CE)
acc. to EN 61000-3-2 (CE); EN 61000-3-3 (CE)
acc. to FCC CFR 47 Part 15, Class B
Region Certification
Europe CE UHI-OGx
Loading...