Bosch NBN-921 User Manual

DinionHD 720p IP Camera

NBN-921

en Installation and Operation Manual

DinionHD 720p IP Camera		Table of Contents | en	3
Table of Contents
1	Safety		8
1.1	Safety precautions		8
1.2	Important safety instructions		9
1.3	Connection in applications		10
1.4	FCC & ICES compliance		11
1.5	MicroSD cards		12
1.6	UL certification		12
1.7	Bosch notices		13
1.8	Copyrights		14
2	Introduction		15
2.1	Features		15
3	System Information		17
3.1	Overview of functions		17
3.1.1	Progressive scan		17
3.1.2	Day/Night function		17
3.1.3	Quad-streaming		17
3.1.4	ONVIF (Open Network Video Interface Forum)		18
3.1.5	Audio		18
3.1.6	Alarm I/O		18
3.1.7	Tamper detection and motion detectors		18
3.1.8	Video encoding		18
3.1.9	Multicast		18
3.1.10	Power-over-Ethernet		18
3.1.11	Encryption		19
3.1.12	Receiver		19
3.1.13	Recording		19
3.1.14	Snapshots		19
3.1.15	Backup		19
3.1.16	Configuration		19
3.2	Operation with external systems		20

Bosch Security Systems

Installation and Operation Manual AR18-10-B013 | v1.52 | 2011.06

4 en | Table of Contents		DinionHD 720p IP Camera
4	Planning	22
4.1	Unpacking	22
4.2	System requirements	23
5	Installation	24
5.1	Lens mounting	24
5.2	Mounting the camera	25
5.3	Network (and power) connector	26
5.4	Power connector	27
5.5	Alarm and relay connector	28
5.6	Audio connectors	29
5.7	MicroSD card	30
5.8	Data connector	31
5.9	Back focus adjustment	31
5.10	Reset button	33
6	Camera set-up	34
6.1	Pre-defined modes	34
6.2	Day/Night switching	35
7	Browser connection	36
7.1	System requirements	36
7.2	Establishing the connection	37
7.2.1	Password protection in camera	37
7.3	Protected network	37
7.4	Connection established	38
7.4.1	LIVEPAGE	38
7.4.2	RECORDINGS	38
7.4.3	SETTINGS	39
8	Basic Mode	40
8.1	Basic Mode menu tree	40
8.2	Device Access	41
8.2.1	Camera name	41
8.2.2	Password	41

AR18-10-B013 | v1.52 | 2011.06 Installation and Operation Manual

Bosch Security Systems

DinionHD 720p IP Camera		Table of Contents | en 5
8.3	Date/Time	42
8.4	Network	43
8.5	Encoder	44
8.6	Audio	44
8.7	Recording	44
8.7.1	Storage medium	44
8.8	System Overview	44
9	Advanced Mode	45
9.1	Advanced Mode menu tree	45
9.2	General	46
9.2.1	Identification	46
9.2.2	Password	46
9.2.3	Date/Time	48
9.2.4	Display Stamping	49
9.3	Web Interface	51
9.3.1	Appearance	51
9.3.2	LIVEPAGE Functions	52
9.3.3	Logging	53
9.4	Camera	55
9.4.1	Mode	55
9.4.2	ALC	57
9.4.3	Shutter/AGC	57
9.4.4	Day/night	59
9.4.5	Enhance	61
9.4.6	Color	62
9.4.7	Encoder Profile	63
9.4.8	Encoder Streams	67
9.4.9	Privacy Masks	68
9.4.10	Audio	68
9.4.11	Installer Menu	69
9.5	Recording	71
9.5.1	Storage Management	71
9.5.2	Recording Profiles	75
9.5.3	Retention Time	76
9.5.4	Recording Scheduler	77

Bosch Security Systems

Installation and Operation Manual AR18-10-B013 | v1.52 | 2011.06

6 en | Table of Contents		DinionHD 720p IP Camera
9.5.5	Recording Status	78
9.6	Alarm	79
9.6.1	Alarm Connections	79
9.6.2	Video Content Analyses (VCA)	82
9.6.3	VCA configurationProfiles	83
9.6.4	VCA configuration - Scheduled	89
9.6.5	VCA configuration - Event triggered	91
9.6.6	Audio Alarm	92
9.6.7	Alarm E-Mail	93
9.6.8	Alarm Task Editor	95
9.7	Interfaces	96
9.7.1	Alarm input	96
9.7.2	Relay	96
9.7.3	COM1	97
9.8	Network	98
9.8.1	Network Access	98
9.8.2	Advanced	102
9.8.3	Multicast	103
9.8.4	FTP Posting	105
9.8.5	Encryption	106
9.9	Service	107
9.9.1	Maintenance	107
9.9.2	Licenses	109
9.9.3	System Overview	109
10	Operation via the browser	110
10.1	Livepage	110
10.1.1	Processor load	110
10.1.2	Image selection	111
10.1.3	View Control	112
10.1.4	Digital I/O	112
10.1.5	System Log / Event Log	112
10.1.6	Saving snapshots	113
10.1.7	Recording video sequences	113
10.1.8	Running recording program	113
10.1.9	Audio communication	114

AR18-10-B013 | v1.52 | 2011.06 Installation and Operation Manual

Bosch Security Systems

DinionHD 720p IP Camera		Table of Contents | en 7
10.2	Recordings page	115
10.2.1	Controlling playback	115
11	Troubleshooting	117
11.1	Function test	117
11.2	Resolving problems	118
11.3	Customer service	120
12	Maintenance	121
12.1	Testing the network connection	121
12.2	Repairs	121
12.2.1	Transfer and disposal	121
13	Technical Data	122
13.1	Specifications	122
13.1.1	Accessories	124
	Glossary	125

Bosch Security Systems

Installation and Operation Manual AR18-10-B013 | v1.52 | 2011.06

8 en | Safety	DinionHD 720p IP Camera

1Safety

1.1Safety precautions

DANGER!

High risk: This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the product. If not avoided, this will result in an electrical shock, serious bodily injury, or death.

WARNING!

Medium risk: Indicates a potentially hazardous situation.

If not avoided, this could result in minor or moderate bodily injury.

CAUTION!

Low risk: Indicates a potentially hazardous situation.

If not avoided, this could result in property damage or risk of damage to the unit.

AR18-10-B013 | v1.52 | 2011.06 Installation and Operation Manual

Bosch Security Systems

DinionHD 720p IP Camera	Safety | en	9

1.2Important safety instructions

Read, follow, and retain for future reference all of the following safety instructions. Follow all warnings on the unit and in the operating instructions before operating the unit.

1.Clean only with a dry cloth. Do not use liquid cleaners or aerosol cleaners.

2.Do not install unit near any heat sources such as radiators, heaters, stoves, or other equipment (including amplifiers) that produce heat.

3.Never spill liquid of any kind on the unit.

4.Take precautions to protect the unit from power and lightning surges.

5.Adust only those controls specified in the operating instructions.

6.Operate the unit only from the type of power source indicated on the label.

7.Unless qualified, do not attempt to service a damaged unit yourself. Refer all servicing to qualified service personnel.

8.Install in accordance with the manufacturer's instructions in accordance with applicable local codes. Use only attachments/accessories specified by the manufacturer. Equipment change or modification could void the user's guarantee or authorization agreement.

Bosch Security Systems

Installation and Operation Manual AR18-10-B013 | v1.52 | 2011.06

10 en | Safety	DinionHD 720p IP Camera

1.3Connection in applications

Power lines: An outdoor system should not be located in the vicinity of overhead power lines, electrical lights, or power circuits, or where it may contact such power lines or circuits. When installing an outdoor system, extreme care should be taken to keep from touching power lines or circuits, as this contact may be fatal.

U.S.A. models only - refer to the National Electrical Code Article 820 regarding installation of CATV systems.

12 VDC / 24 VAC power source: This unit is intended to operate with a limited power source. The unit is intended to operate at either 12 VDC or 24 VAC (if PoE is not available). User supplied wiring must be in compliance with electrical codes (Class 2 power levels). If 24 VAC is used, do not ground the 24 VAC supply at the terminals or at the unit's power supply terminals.

PoE: Use only approved PoE devices. Power-over-Ethernet can be connected at the same time as a 12 VDC or 24 VAC power supply.

CAUTION!

The Low Voltage power supply unit must comply with EN/UL 60950. The power supply must be a SELV-LPS unit or a SELV - Class 2 unit (Safety Extra Low Voltage - Limited Power Source).

AR18-10-B013 | v1.52 | 2011.06 Installation and Operation Manual

Bosch Security Systems

DinionHD 720p IP Camera	Safety | en 11

1.4FCC & ICES compliance

FCC & ICES Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

–reorient or relocate the receiving antenna;

–increase the separation between the equipment and receiver;

–connect the equipment into an outlet on a circuit different from that to which the receiver is connected;

–consult the dealer or an experienced radio/TV technician for help.

Intentional or unintentional modifications, not expressly approved by the party responsible for compliance, shall not be made. Any such modifications could void the user's authority to operate the equipment. If necessary, the user should consult the dealer or an experienced radio/television technician for corrective action.

The user may find the following booklet, prepared by the Federal Communications Commission, helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4.

Bosch Security Systems

Installation and Operation Manual AR18-10-B013 | v1.52 | 2011.06

12 en | Safety	DinionHD 720p IP Camera

1.5MicroSD cards

Some microSD cards have been found to generate high levels of electromagnetic interference that can disturb the normal behavior of some telecom or medical equipment. We advise you to choose and test your microSD card carefully to avoid this problem.

1.6UL certification

Disclaimer

Underwriter Laboratories Inc. ("UL") has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested fire, shock and/or casualty hazards as outlined in UL's Standard(s) for Safety for Information Technology Equipment, UL 60950-1. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product.

UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.

Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working life, must be collected and disposed of separately from household waste material. Separate collecting systems are usually in place for disused electronic and electrical products. Please dispose of these units at an environmentally compatible recycling facility, per European Directive 2002/96/EC

AR18-10-B013 | v1.52 | 2011.06 Installation and Operation Manual

Bosch Security Systems

DinionHD 720p IP Camera	Safety | en 13

1.7Bosch notices

Video / Recording loss

CAUTION!

Video loss is inherent to digital or network video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information on local storage microSD card within the camera or in a central storage system.

Bosch Security systems recommends that local storage on microSD card should only be used for alarm recording and Automatic Network Replenishment (ANR) applications.

To minimize the risk of lost digital information, we recommend multiple, redundant recording systems, and a procedure to back up all digital information.

Copyright

This manual is the intellectual property of Bosch Security Systems and is protected by copyright.

All rights reserved.

Trademarks

All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.

Note

This manual has been compiled with great care. The text was complete and correct when published. The ongoing development of the products may mean that the content of the user guide can change without notice. Bosch Security Systems accepts no liability for damage resulting directly or indirectly from faults, incompleteness or discrepancies between the user guide and the product described.

More information

For more information please contact the nearest Bosch Security Systems location or visit www.boschsecurity.com

Bosch Security Systems

Installation and Operation Manual AR18-10-B013 | v1.52 | 2011.06

14 en | Safety	DinionHD 720p IP Camera

1.8Copyrights

The firmware uses the fonts "Adobe-Helvetica-Bold-R-Normal-- 24-240-75-75-P-138-ISO10646-1" and "Adobe-Helvetica-Bold-R- Normal--12-120-75-75-P-70-ISO10646-1" under the following copyright:

Copyright 1984-1989, 1994 Adobe Systems Incorporated. Copyright 1988, 1994 Digital Equipment Corporation. Permission to use, copy, modify, distribute and sell this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notices appear in all copies and that both those copyright notices and this permission notice appear in supporting documentation, and that the names of Adobe Systems and Digital Equipment Corporation not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission.

This software is based in part on the work of the Independent JPEG Group.

AR18-10-B013 | v1.52 | 2011.06 Installation and Operation Manual

Bosch Security Systems

DinionHD 720p IP Camera	Introduction | en 15

2Introduction

2.1Features

The DinionHD 720p IP Day/Night camera is a high-performance, surveillance color camera. It incorporates 15-bit digital signal processing for outstanding picture performance.

The camera uses H.264 compression technology to give clear images while reducing bandwidth and storage requirements. It is also ONVIF compliant to improve compatibility during system integration.

The camera operates as a network video server and transmits video and control signals over data networks, such as Ethernet LANs and the Internet.

The camera is easy to install and ready to use. Features include:

–Progressive scan HD sensor

–True Day/Night performance with switchable IR filter

–1/3-inch CCD sensor

–Quad-streaming

–MicroSD/SDHC card slot

–Complies with the ONVIF standard for wide compatibility

–Two-way audio and audio alarm

–Alarm input and alarm output to external devices

–Dynamic engine with Smart BLC

–Six pre-programmed operation modes

–Adaptive dynamic noise reduction

–Enhanced video motion detection

–Video and data transmission over IP data networks

–Multicast function for simultaneous picture transmission to multiple receivers

–Integrated Ethernet interface (10/100 Base-T)

–Power-over-Ethernet (PoE)

–Remote control of all built-in functions via TCP/IP

–Data interface RS485/RS422/RS232 for control of pan or tilt heads or motorized zoom lenses (PTZ control)

Bosch Security Systems

Installation and Operation Manual AR18-10-B013 | v1.52 | 2011.06

16 en | Introduction	DinionHD 720p IP Camera

–Password protection to prevent unauthorized connection or configuration changes

–Event-driven, automatic connection (for example, at switch-on and for alarms)

–Fast, convenient configuration using the integrated Web server and a browser

–Firmware update through flash memory

–Convenient upload and download of configuration data

AR18-10-B013 | v1.52 | 2011.06 Installation and Operation Manual

Bosch Security Systems

DinionHD 720p IP Camera	System Information | en 17

3System Information

3.1Overview of functions

The camera incorporates a network video server. Its primary function is to encode video and control data for transmission over an IP network. With its H.264 encoding, it is ideally suited for IP communication and for remote access to digital video recorders and IP systems. The use of existing networks means that integration with CCTV systems or local networks can be achieved quickly and easily. Video images from a single camera can be simultaneously received on several receivers.

3.1.1Progressive scan

The camera captures and processes progressively scanned images. When there is fast motion in a scene, progressively scanned images are generally sharper than interlaced images.

3.1.2Day/Night function

The Day/Night function provides enhanced night viewing by increasing the IR sensitivity. The motorized IR filter can be removed in low-light or IR illuminated applications. The IR filter switches from color to monochrome automatically by sensing the illumination level. In auto switching mode the camera prioritizes motion (the camera gives sharp images without motion blur) or color (the camera gives color pictures as long as the light level permits). For reliable Day/Night switching with an external IR illuminator, synchronize the camera with the IR illuminator using an alarm input port

3.1.3Quad-streaming

Quad-streaming enables the camera to deliver three H.264 streams (a 720p HD stream, a downscaled resolution stream, and a HD I-frame only stream) together with an M-JPEG stream. These four streams facilitate bandwidth-efficient viewing and recording options as well as integration with third-party video management systems.

Bosch Security Systems

Installation and Operation Manual AR18-10-B013 | v1.52 | 2011.06

18 en | System Information	DinionHD 720p IP Camera

3.1.4ONVIF (Open Network Video Interface Forum)

The camera complies to the ONVIF standard which means that it is easier to install and integrate into larger systems. The ONVIF standard is a global standard for the interface of network video products.

3.1.5Audio

Two-way duplex audio is available in the unit for live voice communications or audio recording.

3.1.6Alarm I/O

The alarm input can be used to control the functionality of the unit. An alarm output can control external devices.

3.1.7Tamper detection and motion detectors

The camera offers a wide range of configuration options for alarm signaling in the event of tampering with the camera. An algorithm for detecting movement in the video image is also included. Camera versons with enhanced hardware can be optionally extended to include additional IVA features.

3.1.8Video encoding

The camera uses the H.264 compression standards. Thanks to efficient encoding, the data rate remains low even with high image quality and can also be adapted to local conditions within wide limits.

3.1.9Multicast

In suitably configured networks, the multicast function enables simultaneous, real time transmission to multiple receivers. The prerequisite for this is that the UDP and IGMP V2/V3 protocols are implemented on the network.

3.1.10Power-over-Ethernet

Power for the camera can be supplied via a Power-over- Ethernet compliant network cable connection. With this configuration, only a single cable connection is required to view, power, and control the camera.

AR18-10-B013 | v1.52 | 2011.06 Installation and Operation Manual

Bosch Security Systems

DinionHD 720p IP Camera	System Information | en 19

3.1.11Encryption

The unit offers a variety of options for protection against unauthorized reading. Web browser connections can be protected using HTTPS. Protect the control channels via the SSL encryption protocol. With an additional license, the user data itself can be encrypted.

3.1.12Receiver

Computers with decoding software such as the Bosch Video Client or the Bosch Video Management System, or computers with the Microsoft Internet Explorer web browser installed, can be used as receivers.

3.1.13Recording

The camera can be used with an iSCSI storage connected via the network to store long-term recordings, and with a local microSD card for shorter storage times and temporary recordings.

3.1.14Snapshots

Individual video frames (snapshots) can be called up as JPEG images, stored on the hard drive, or displayed in a separate browser window.

3.1.15Backup

The browser application has an icon for saving the video images provided by the unit as a file on your computer's hard drive. Clicking this icon stores the video sequences and they can be replayed with the Player from Bosch Security Systems included with the package.

3.1.16Configuration

The camera can be configured using a browser on the local network (Intranet) or from the Internet. Similarly, firmware updates and rapid loading of device configurations are also possible. Configuration settings can be stored as files on a computer and copied from one camera to another.

Bosch Security Systems

Installation and Operation Manual AR18-10-B013 | v1.52 | 2011.06

20 en | System Information	DinionHD 720p IP Camera

3.2Operation with external systems

The camera can be used with a variety of Bosch software and hardware systems:

–Bosch Video Management System

–Bosch Video Client

–Bosch Recording Station

–

Note:

When connected to any of these systems, many of the camera configuration parameters are controlled by the system and not by the settings made via a web browser connected to the camera.

Bosch Video Management System

The Bosch Video Management System is a unique enterprise IP video surveillance solution that provides seamless management of digital video, audio, and data across any IP network. It is designed to work with Bosch CCTV products as part of a total video surveillance management system. Integrate your existing components into one easy-to-manage system, or use Bosch’s full-line capabilities and benefit from a complete surveillance solution based on cutting-edge technology and years of experience.

Bosch Video Client

The camera video server and the Bosch Video Client software combine to provide a high-performance system solution. The Bosch Video Client is software for operating, controlling, and administering CCTV installations (such as surveillance systems). It runs under Microsoft Windows operating systems. Its main job is decoding video, audio, and control data from a remote transmitter.

Bosch Recording Station

The camera is also designed for use with the Bosch Recording Station. The Bosch Recording Station can record up to 32 video and audio streams, and supports various functions of the

AR18-10-B013 | v1.52 | 2011.06 Installation and Operation Manual

Bosch Security Systems

DinionHD 720p IP Camera	System Information | en 21

camera, such as controlling relays, remote control of peripheral devices, and remote configuration. It can use alarm inputs to trigger actions and, when motion detection Motion+ is active, can record the relevant cells, making intelligent motion detection possible.

Bosch Security Systems

Installation and Operation Manual AR18-10-B013 | v1.52 | 2011.06

22 en | Planning	DinionHD 720p IP Camera

4Planning

4.1Unpacking

Unpack carefully and handle the equipment with care. The packaging contains:

–DinionHD 720p IP camera

–CCD protection cap (mounted on camera)

–Power connector

–Alarm I/O connector

–Data connector

–Spare lens connector (male)

–DVD ROM (mini)

–Manual

–System requirements

–Bosch Video Client

–Quick install instructions

–Safety instructions

If equipment has been damaged during shipment, repack it in the original packaging and notify the shipping agent or supplier.

AR18-10-B013 | v1.52 | 2011.06 Installation and Operation Manual

Bosch Security Systems

DinionHD 720p IP Camera	Planning | en 23

4.2System requirements

–Computer with Windows XP/Vista operating system, network access, and Microsoft Internet Explorer web browser version 7.0 or later

or

–Computer with Windows XP/Vista operating system, network access and reception software, for example Bosch Video Client, Bosch Video Management System, or Bosch Recording Station

The minimum PC requirements are:

–Operating platform: A PC running Windows XP or Windows Vista with IE 7.0

–Processor: Dual core, 3.0 GHz

–RAM memory: 256 MB

–Monitor resolution: 1024 x 768

–Network interface: 100-BaseT

–DirectX: 9.0c

Make sure the graphics card is set to 16-bit or 32-bit color depth and that Sun JVM is installed on your PC. To play back live video images, an appropriate ActiveX must be installed on the computer. If necessary, install the required software and controls from the product DVD provided. For further assistance, contact your PC system administrator.

Bosch Security Systems

Installation and Operation Manual AR18-10-B013 | v1.52 | 2011.06

24 en | Installation	DinionHD 720p IP Camera

5Installation

CAUTION!

Installation should only be performed by qualified service personnel in accordance with the National Electrical Code or applicable local codes.

5.1Lens mounting

Bosch

Figure 5.1 Mounting a lens

Bosch

Figure 5.2 Lens connector

Pin	Video iris lens	DC iris lens
1	Supply (11.5V ±0.5, 50mA max.)	Damp -
2	Not used	Damp +
3	Video signal 1Vpp 1kOhm	Drive +
4	Ground	Drive -

Note

If a short circuit is detected on the lens connector, the message LENS SHORT CIRCUIT is shown. The lens circuit is automatically disabled to avoid internal damage. Remove the lens connector and check the pin connections.

AR18-10-B013 | v1.52 | 2011.06 Installation and Operation Manual

Bosch Security Systems

DinionHD 720p IP Camera	Installation | en 25

5.2Mounting the camera

The camera can be mounted either from the top or from the bottom (1/4" 20 UNC thread).

Figure 5.3

Mounting a camera

CAUTION!

Do not expose the image sensors to direct sunlight.

Do not obstruct the free flow of air around the camera.

Bosch Security Systems

Installation and Operation Manual AR18-10-B013 | v1.52 | 2011.06

26 en | Installation	DinionHD 720p IP Camera

5.3Network (and power) connector

AUDIO IN

	1	ALARM	E
		4
			T
	2
		5	H
	3
		6
			P
			o
			E
			SD

AUDIO OUT

		–
		+
		12 VDC
		24 VAC
	1	DATA
		4
	2
		5
	3
		6

STP Cat 5e RJ45

Figure 5.4 Network connection

–Connect the camera to a 10/100 Base-T network.

–Use STP (Shielded Twisted Pair) Category 5e cable with RJ45 connectors. The camera network socket is Auto MDIX compliant.

–Power can be supplied to the camera via the Ethernet

cable compliant with the Power-over-Ethernet (IEEE 802.3af) standard.

The multicolored LED beside the Ethernet connection indicates Power (red), IP connection (green) and IP traffic (green flashing). It can be disabled in the Installer menu.

By default, power is supplied to the camera via the Ethernet cable, compliant with the Power-over-Ethernet standard.

AR18-10-B013 | v1.52 | 2011.06 Installation and Operation Manual

Bosch Security Systems

DinionHD 720p IP Camera	Installation | en 27

5.4Power connector

AUDIO IN

	1	ALARM	E
		4
	2		T
		5	H
	3
		6
			P
			o
			E

SD

AUDIO OUT

		–
		+
		12 VDC
		24 VAC
	1	DATA
		4
	2
		5
	3
		6

5 mm

0.2 in

Figure 5.5 Power connection

Connect power from a 24 VAC or 12 VDC class 2 power supply as follows:

–Use AWG16 to 22 stranded wire or AWG16 to 26 solid wire; cut back 5 mm (0.2 in) of insulation.

–Loosen the screws of the supplied 2-pole connector and insert the wires.

–Tighten the screws and insert the 2-pole connector into the power socket of the camera.

Bosch Security Systems

Installation and Operation Manual AR18-10-B013 | v1.52 | 2011.06

28 en | Installation	DinionHD 720p IP Camera

5.5Alarm and relay connector

	Alarm
1	4
2	5	5 mm
3	6	(0.2 in)

Figure 5.6 Alarm and relay connector pins

Pin	Alarm socket
1	Alarm in 1
2	Alarm in 2
3	Relay out contact 1
4	Ground
5	Ground
6	Relay out contact 2

Alarm Input

–AWG 26-16 max.(0.13-1.5 mm2); cut back 5 mm (0.2 in) of insulation.

–Impedence: Internal pull-up 10 kOhm to +5 VDC.

–Input voltage range: -5 VDC minimum to 40 VDC maximum.

–Input voltage treshold: low voltage 0.8 V maximum, high voltage 2.4 V minimum.

–Configurable as active low or active high.

Use the alarm input to connect external alarm devices such as door contacts or sensors. A zero potential make or break contact can be used as the actuator (use a bounce-free contact system).

Relay output

–Max. wire diameter AWG 22-28 for both stranded and solid; cut back 5 mm (0.2 in) of insulation.

–Output relay switching capability: Max voltage 30VAC or +40 VDC. Max 0.5 A continuous, 10 VA.

–Max. 42 V allowed between camera ground and each of the relay pins.

AR18-10-B013 | v1.52 | 2011.06 Installation and Operation Manual

Bosch Security Systems

DinionHD 720p IP Camera	Installation | en 29

5.6Audio connectors

Line

GND

AUDIO IN

	1	ALARM	E
		4
			T
	2
		5	H
	3
		6
			P
			o
			E
			SD

AUDIO OUT

		–
		+
		12 VDC
		24 VAC
	1	DATA
		4
	2
		5
	3
		6

Figure 5.7 Audio connectors

Connect audio devices to the Audio In and Audio Out connectors.

The unit has full-duplex mono audio. The two-way communication can be used to connect a speaker or door intercom system. The audio input signal is transmitted in sync. with the video signal.

Audio input: Line input level (not suitable for direct microphone signal); impedance 9 kOhm typical; 5.5 Vpp maximum input voltage.

Audio output: Line output level (not suitable for direct speaker connection); impedance 16 Ohm minimum; 3 Vpp maximum output voltage.

Wiring: Shielded audio connection cable is advised. Observe maximum cable lengths for audio line input and output levels.

Bosch Security Systems

Installation and Operation Manual AR18-10-B013 | v1.52 | 2011.06

30 en | Installation	DinionHD 720p IP Camera

5.7MicroSD card

AUDIO IN

	1	ALARM
		4
	2
		5
	3
		6

E

T

H

P o E

SD

AUDIO OUT

1 2 3

– +

12 VDC 24 VAC

DAT

4 5 6

SD Card

Figure 5.8 Inserting an microSD card

1.Unscrew the microSD card slot cover.

2.With the connection pads to the left, slide the microSD card into the slot until it locks in place.

3.Screw the cover into place to seal the slot.

AR18-10-B013 | v1.52 | 2011.06 Installation and Operation Manual

Bosch Security Systems